HMHongru Ma

Hongru Ma

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hongru Ma has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optimal Placement of Sensors Based on Data Fusion for Condition Monitoring of Pulley Group under Speed Variation Condition

    by Jie Wu, Yanyang Zi, Hongru Ma, Yaochun Wu, Xiaofeng Xue

    Pulley group plays an important role in the transmission of large mechanical equipment. To obtain informative data for condition monitoring, it is very important to optimize sensor placement on the pulley group. However, due to sharp speed fluctuation, heavy load and complex internal structure, sensor placement for acquiring optimal monitoring points is still a challenging task. Therefore, a novel sensor optimization method based on data fusion is proposed. In this method, the Kalman filter is firstly used to refine the collected signal for dealing with the variable noises. Subsequently, the variable periodicity strength of the signal is calculated to recognize the non-stationary characteristics of the measured signal. A data fusion technique based on maximum likelihood estimation (MLE) is then introduced to estimate sensitive components from the multi-source sensor signals for finding out optimal sensor placement points. The method is validated experimentally on a test rig of the pulley group with variable speed conditions. Analysis results show that the proposed method can recognize the optimal sensor placement points for the pulley group.


  • Open Access

    Theoretical Calculation and Analysis of Coherent Interfacial Energy between B1-Type Carbides and FCC Iron Matrix

    by Bin Jia, Hongru Ma, Yan Peng

    The valence electron structures (VES) of unit cells of the FCC iron matrix (γ) and B1-type carbides (ξ) in γ-Fe-M-C alloy systems (M=Nb, Ti, and V) were calculated using the empirical electron theory of solids and molecules (EET). Based on the results, the coherent interfacial energy between B1-type carbides and FCC iron matrix in γ-Fe-M-C alloy system was calculated and analyzed by combining EET and the discrete lattice plane-nearest neighbor broken bond (DLP-NNBB) method with covalent bond energy. The results showed that the solid solution strengthening effect was produced by the solute phase boundary segregation of the alloy elements at the γ/ξ interface, which enhanced the covalent bond network. The Nb alloy system had the largest segregation effect in γ-Fe-M-C alloy system. Moreover, the γ/ξ interfacial energy varies with different alloy elements over the range of 0.4-1.3 J/m2, and the γ-Fe-Nb-C alloy system has the largest coherent interfacial energy.The proposed theoretical method is consistent with the theoretical values calculated using other models, as well as empirical values. This indicates that the method proposed in this work is feasible for providing theoretical analysis and guidance.

  • Effect of the micro-structure evolution of friction layer on the sliding tribology behavior of TiAl-10 Wt.% Ag at 16 N-0.5 m/s

    by Kang Yang, Hongru Ma, Xiyao Liu, Yangming Zhang

    Purpose: This paper aims to study the micro-structure evolution of friction layers to optimize the friction and wear behaviors of TiAl-based material. It further enlarges the scope of using TiAl alloys and increase in the service life of TiAl alloy-made mechanical components, especially under some extreme conditions. Design/methodology/approach: To study the structure evolution of friction layers, the HT-1000 tribometer is used to study the friction and wear properties of as-prepared samples. With the assistance of field emission scanning electron microscopy and an electron probe micro-analyzer, the stratified structures in cross-sections and a surface morphology of the wear scars are well characterized. A ST400 surface profiler helps in better understanding of the three-dimensional texture profiles of wear scars. X-ray diffractometer (XRD) is also used to analyze phases in the as-prepared samples. Findings: An analysis method on the micro-structure evolution can provide better views to understand the influence of friction layers on the tribological behavior, at different wear stages. It finds that the micro-structure evolution of friction layers has an immediate effect on the friction coefficients and wear rates of TiAl-based material. It also proves to be a useful tool for evaluating the behaviors in friction and wear of TiAl-based material. Originality/value: The findings of this paper provide better assistance to explore the effect of friction layers on the friction and wear behaviors of TiAl-based materials. The results help in deep understanding of the micro-structure evolution of friction layers. It also increases the service life of TiAl-based mechanical components.


  • Understanding Wear Interface Evolution to Overcome Friction and Restrain Wear of TiAl–10 wt%Ag Composite

    by Kang Yang, Hongru Ma, Xiyao Liu, Qiang He

    The main objective of this paper is to study wear interface evolution for analyzing the of friction and wear property of TiAl–10 wt%Ag composite. The results show that the friction coefficient and wear rate of TiAl–10 wt%Ag rapidly reduce at 0–25 min and rhythmically fluctuate at 25–60 min. TiAl–10 wt%Ag at 60–240 min obtains low friction and less wear. It is concluded that silver with the low shearing strength of about 125 MPa shows the eminent plastic deformation on wear interface. It effectively reduces friction resistance and material loss, cause TiAl–10 wt%Ag to obtain low friction coefficient, and less wear rate at 0–25 min. Increased silver content, reduces oxide content, and varies wear mechanisms cause the repeating variation of friction resistance and material loss, which results in the rhythmical fluctuation of friction coefficient and wear rate at 25–60 min. High silver contents exist on smooth wear interfaces, exhibit the eminent plastic deformation to lower friction and reduce wear. TiAl–10 wt%Ag obtains the low friction and less wear at 60–240 min.


  • Open Access

    Multiwalled carbon nanotubes enhanced the friction layer evolution and self-lubricating property of TiAl-10 wt% Ag-1 wt% MWCNTs sample

    by Kang Yang, Hongru Ma, Xiyao Liu, Yangming Zhang, Qiang He

    The necessity of reducing energy consumption and usage of material in aerospace and aviation industries drives the further optimization of friction and wear properties of TiAl alloys. Herein, the effect of MWCNTs on the friction layer evolution and lubrication properties of TiAl-10 wt% Ag-1 wt% MWCNT (TAM) composites sliding against Si3N4 balls are studied on a ball-on-disk tribometer. The research results show that the friction coefficients and wear rates of TAM sample at 0–160 min are smaller than those of TiAl-10 wt% Ag (TA). During the process of sliding wear, MWCNTs in TAM were gradually exposed to wear scar and were tightly combined with silver, which was beneficial for the formation of lubrication film on the wear scar. Consequently, the formation of lubricating film was accelerated by the MWCNTs, and the evolution process of the friction layer of TAM sample was shortened. The excellent synergetic lubrication behavior of MWCNTs and silver in the lubricating film effectively reduced friction resistance and material loss, resulting in TAM with smaller friction coefficient and lower wear rate in comparison to TA.