Zhun Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Zhun Liu has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Zhidong Guan
School of Aeronautic Science and Engineering, Beihang University, Beijing 100191, China
3 shared publications Jifeng Xu
Beijing Aeronautical Science and Technology Research Institute, Beijing, China
2 shared publications- Jifeng Xu
Beijing Key Laboratory of Civil Aircraft Structures and Composite Materials Beijing Aeromautical Technology Research Institute of COMAC Beijing China
2 shared publications Riming Tan
School of Aeronautic Science and Engineering, Beihang University, Beijing, China
2 shared publicationsJun Kang
Beihang University
1 shared publication- Riming Tan
School of Aeronautic Science and Engineering, Beihang University, Beijing 100191, China
1 shared publication
Latest Publications
- Open Access
Relationship Between Matrix Cracking and Delamination in CFRP Cross-Ply Laminates Subjected to Low Velocity Impact
The effect of matrix cracking on the delamination morphology inside carbon fiber reinforced plastics (CFRP) laminates during low-velocity impact (LVI) is an open question. In this paper, the relationship between matrix cracking and delamination is studied by using cross-ply laminates. Several methods, including micrograph, C-scan, and visual inspection, were adopted to characterize the damage after LVI experiments. Based on the experimental results, finite element (FE) models were established to analyze the damage mechanisms. The matrix cracking was predicted by the extended finite element method (XFEM) and the Puck criteria, while the delamination was modeled by cohesive elements. It was revealed that the matrix crack in the bottom ply not only promoted the outward propagation of delamination but also contributed to the narrow delamination beneath the impact location. Multiple matrix cracks occurred in the middle ply. The ones close to the plate center initiated the delamination and prevented large-scale delamination beneath the impact location. For the cracks that were far away, no significant effect on delamination was found. In conclusion, the stress redistribution caused by the crack opening determines the delamination.
Open AccessRelationship Between Matrix Cracking and Delamination in CFRP Cross-Ply Laminates Subjected to Low Velocity Impact
The effect of matrix cracking on the delamination morphology inside carbon fiber reinforced plastics (CFRP) laminates during low-velocity impact (LVI) is an open question. In this paper, the relationship between matrix cracking and delamination is studied by using cross-ply laminates. Several methods, including micrograph, C-scan, and visual inspection, were adopted to characterize the damage after LVI experiments. Based on the experimental results, finite element (FE) models were established to analyze the damage mechanisms. The matrix cracking was predicted by the extended finite element method (XFEM) and the Puck criteria, while the delamination was modeled by cohesive elements. It was revealed that the matrix crack in the bottom ply not only promoted the outward propagation of delamination but also contributed to the narrow delamination beneath the impact location. Multiple matrix cracks occurred in the middle ply. The ones close to the plate center initiated the delamination and prevented large-scale delamination beneath the impact location. For the cracks that were far away, no significant effect on delamination was found. In conclusion, the stress redistribution caused by the crack opening determines the delamination.
- 21 January 2019
- Published by Springer Nature in Applied Composite Materials
- Vol. 26 (3) , 923-944
Analysis of Open-Hole Compressive CFRP Laminates at Various Temperatures Based on a Multiscale Strategy
- 21 January 2019
- Published by Springer Nature in Applied Composite Materials
- Vol. 26 (3) , 923-944
Analysis of Open-Hole Compressive CFRP Laminates at Various Temperatures Based on a Multiscale Strategy
- Open Access
Multiscale Analysis of CFRP Laminates with MMF3 Criterion under Different Off-Axis Loading Conditions
A multiscale analysis strategy with physical modified-micromechanics of failure (MMF3) criterion was proposed to analyze the failure behaviors of carbon fiber reinforced plastic (CFRP) laminates. The quantitative relationship between the macro- and micro- stresses was determined considering two typical fiber distributions. Thermal residual stress was taken into account in the stress transformation. The failures were defined and the properties of damaged elements were degraded at the constituent level. The back-calculation method based on the iteration algorithm was proposed to determine the micro strength with macro mechanical tests. A series of off-axis loading tests were conducted to verify the established multiscale models. The predicted strength was also compared with the results using micromechanics of failure (MMF) criterion to present accuracy improvements. Thermal residual stress was found to affect the strength by contributing to the matrix damage status. Meanwhile, sensitivity analysis was provided for the matrix-dominant micro strength to investigate its physical meaning. Results suggest that the micro tensile and compressive strength of the matrix influenced the off-axis tensile and compressive strengths respectively, with relative large off-axis angles, while the micro shear strength of the matrix dominated when the off-axis angles were relative small.
Open AccessMultiscale Analysis of CFRP Laminates with MMF3 Criterion under Different Off-Axis Loading Conditions
A multiscale analysis strategy with physical modified-micromechanics of failure (MMF3) criterion was proposed to analyze the failure behaviors of carbon fiber reinforced plastic (CFRP) laminates. The quantitative relationship between the macro- and micro- stresses was determined considering two typical fiber distributions. Thermal residual stress was taken into account in the stress transformation. The failures were defined and the properties of damaged elements were degraded at the constituent level. The back-calculation method based on the iteration algorithm was proposed to determine the micro strength with macro mechanical tests. A series of off-axis loading tests were conducted to verify the established multiscale models. The predicted strength was also compared with the results using micromechanics of failure (MMF) criterion to present accuracy improvements. Thermal residual stress was found to affect the strength by contributing to the matrix damage status. Meanwhile, sensitivity analysis was provided for the matrix-dominant micro strength to investigate its physical meaning. Results suggest that the micro tensile and compressive strength of the matrix influenced the off-axis tensile and compressive strengths respectively, with relative large off-axis angles, while the micro shear strength of the matrix dominated when the off-axis angles were relative small.
- 1 July 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 106-112
Impact and compression after impact behavior of single-stiffener composite panels
The purpose of this paper was to investigate the damage tolerance of single-stiffener panels. The impact response and the influence of impact damage on compression behavior were studied. Barely visible impact damage (BVID) was introduced to the stiffener flange tip on the smooth side. By applications of visual inspections and C-scan, massive damage was detected. After the impact experiment, compression tests were carried on the intact specimens and impacted specimens. The experimental results reveal that impact damage has no significant effect on the buckling mode. but decreases the buckling load by about 10%. The results also show that impact damage has an important influence on the compression failure mechanism. Under the compressive loading, impact damage propagates inside the skin after the buckling, which is a trigger for final fracture of damaged stiffened panels. Consequently, the impact damage causes a dramatical decrease in the failure load by 34%, approximately.
- 1 July 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 106-112
Impact and compression after impact behavior of single-stiffener composite panels
The purpose of this paper was to investigate the damage tolerance of single-stiffener panels. The impact response and the influence of impact damage on compression behavior were studied. Barely visible impact damage (BVID) was introduced to the stiffener flange tip on the smooth side. By applications of visual inspections and C-scan, massive damage was detected. After the impact experiment, compression tests were carried on the intact specimens and impacted specimens. The experimental results reveal that impact damage has no significant effect on the buckling mode. but decreases the buckling load by about 10%. The results also show that impact damage has an important influence on the compression failure mechanism. Under the compressive loading, impact damage propagates inside the skin after the buckling, which is a trigger for final fracture of damaged stiffened panels. Consequently, the impact damage causes a dramatical decrease in the failure load by 34%, approximately.
- 1 December 2014
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 1064, 108-114
Fatigue Life Prediction of Composite Laminates Based on Progressive Damage Analysis
A three dimensional analysis model is developed on the fatigue life prediction of composite laminates based on a progressive damage analysis. This model consists of stress analysis, fatigue failure analysis and material property degradation. Teserpe’s failure criteria is used to fatigue damage analysis. Fiber tensile/compressive breakage, matrix tensile/compressive cracking, matrix/fiber shear failure and tension/compression delamination are considered in fatigue damage analysis. The methodologies of sudden degradation and gradual degradation are both applied in the material property degradation. The stiffness and strength gradual degradation is based on the Shokrieh fatigue model, which is based on fatigue test for unidirectional laminates. In order to consider the scatter of the material in the practical structures, the stiffness and strength of the material are randomly distributed using normal distribution in the numerical model. The progressive fatigue damage model is developed in finite element code ABAQUS through user subroutine UMAT, which can simulate the fatigue damage process. Fatigue life of different ply stacking sequences and geometries composite laminates under different cycle loading are predicted. The predicted fatigue life is in good agreement with the experimental results.
- 1 December 2014
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 1064, 108-114
Fatigue Life Prediction of Composite Laminates Based on Progressive Damage Analysis
A three dimensional analysis model is developed on the fatigue life prediction of composite laminates based on a progressive damage analysis. This model consists of stress analysis, fatigue failure analysis and material property degradation. Teserpe’s failure criteria is used to fatigue damage analysis. Fiber tensile/compressive breakage, matrix tensile/compressive cracking, matrix/fiber shear failure and tension/compression delamination are considered in fatigue damage analysis. The methodologies of sudden degradation and gradual degradation are both applied in the material property degradation. The stiffness and strength gradual degradation is based on the Shokrieh fatigue model, which is based on fatigue test for unidirectional laminates. In order to consider the scatter of the material in the practical structures, the stiffness and strength of the material are randomly distributed using normal distribution in the numerical model. The progressive fatigue damage model is developed in finite element code ABAQUS through user subroutine UMAT, which can simulate the fatigue damage process. Fatigue life of different ply stacking sequences and geometries composite laminates under different cycle loading are predicted. The predicted fatigue life is in good agreement with the experimental results.