Juanjuan Zheng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Juanjuan Zheng has a total of 90 co-authors. Here are the top co-authors by number of shared publications:
- Peng Gao
Ministry of Education
21 shared publications - Ying Ma
School of Physics, Xidian University, Xi’an 710071, China
14 shared publications - Sha An
School of Physics, Xidian University, Xi’an 710071, China
13 shared publications Kai Wen
Engineering Research Center of Information Nanomaterials, Universities of Shaanxi Province
11 shared publications- Min Liu
Xidian University
7 shared publications Zeev Zalevsky
Bar-Ilan University, Faculty of Engineering and Nano Technology Center
6 shared publications
Latest Publications
- 6 April 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (14)
Optical sectioning lattice structured illumination microscopy (OS-LSIM)
Optical sectioning structured illumination microscopy (OS-SIM) is a high-speed, minimally invasive, three-dimensional imaging microscopic technique, playing an important role in life science. However, OS-SIM is unable to achieve optical sectioning and isotropic super-resolution simultaneously. To tackle this drawback, we propose and demonstrate herein optical sectioning lattice structured illumination microscopy (OS-LSIM). This method utilizes a digital micro-mirror device to generate two-dimensional lattice patterns and a lock-in based reconstruction algorithm to realize both optical sectioning and spatial resolution enhancement. OS-LSIM features an axial resolution (optical sectioning strength) of 688 ± 16 nm and a lateral resolution improvement factor of 1.79 compared to conventional wide-field microscopy. We anticipate that OS-LSIM will open new avenues for the study of cellular dynamics in life science.
- 6 April 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (14)
Optical sectioning lattice structured illumination microscopy (OS-LSIM)
Optical sectioning structured illumination microscopy (OS-SIM) is a high-speed, minimally invasive, three-dimensional imaging microscopic technique, playing an important role in life science. However, OS-SIM is unable to achieve optical sectioning and isotropic super-resolution simultaneously. To tackle this drawback, we propose and demonstrate herein optical sectioning lattice structured illumination microscopy (OS-LSIM). This method utilizes a digital micro-mirror device to generate two-dimensional lattice patterns and a lock-in based reconstruction algorithm to realize both optical sectioning and spatial resolution enhancement. OS-LSIM features an axial resolution (optical sectioning strength) of 688 ± 16 nm and a lateral resolution improvement factor of 1.79 compared to conventional wide-field microscopy. We anticipate that OS-LSIM will open new avenues for the study of cellular dynamics in life science.
- 11 March 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (6) , 9925
Soliton eigenvalue control by interaction of circularly polarized lights in a nonlinear fiber
We numerically propose a physical method for controlling Zakharov-Shabat (ZS) eigenvalues of solitons in optical fibers, which is realized through the interaction between circularly polarized lights. Using this method, we not only achieve the decomposition of multi-soliton (MS) bound states, but also realize physical processes of reconstructing MS states. Introducing polarization as a key degree of freedom, our approach ensures accurate measurement of the imaginary parts of the discrete eigenvalues while exhibiting higher decomposition efficiency than existing methods. It is worth noting that the probe soliton inducing these phenomena plays a key role, which uncovers an uncertainty principle-like trade-off in measurements. Our results can deepen the understanding of microscopic properties of solitons and their interaction mechanisms, and moreover provide a promising all-optical solution for the design of eigenvalue-based multiplexers and demultiplexers.
- 11 March 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (6) , 9925
Soliton eigenvalue control by interaction of circularly polarized lights in a nonlinear fiber
We numerically propose a physical method for controlling Zakharov-Shabat (ZS) eigenvalues of solitons in optical fibers, which is realized through the interaction between circularly polarized lights. Using this method, we not only achieve the decomposition of multi-soliton (MS) bound states, but also realize physical processes of reconstructing MS states. Introducing polarization as a key degree of freedom, our approach ensures accurate measurement of the imaginary parts of the discrete eigenvalues while exhibiting higher decomposition efficiency than existing methods. It is worth noting that the probe soliton inducing these phenomena plays a key role, which uncovers an uncertainty principle-like trade-off in measurements. Our results can deepen the understanding of microscopic properties of solitons and their interaction mechanisms, and moreover provide a promising all-optical solution for the design of eigenvalue-based multiplexers and demultiplexers.
- 19 February 2026
- Published by Optica Publishing Group in Biomedical Optics Express
- Vol. 17 (3) , 1499-1511
Synergistic microscopic platform for probing molecular interaction on mitochondria-lysosome contact membrane
In biomedicine, studies on dynamic interactions between mitochondria and lysosomes are critical for understanding cellular metabolism and disease mechanisms. Yet, the interaction mechanism on the molecular level is still unclear due to a lack of suitable investigation tools. Here, we employ a synergistic microscopic platform that integrates quantitative phase contrast microscopy (QPCM), confocal fluorescent imaging, line-scanning fluorescence resonance energy transfer (ls-FRET), and line-scanning fluorescence correlation spectroscopy (ls-FCS) to reveal the mechanism of biomolecular interaction on mitochondria–lysosome contact membranes. Using ls-FRET, we quantified the FRET efficiency between (Rab7A) donors and (TOM20) acceptors situated in the mitochondrial-lysosomal contact membrane. It is found that FRET efficiency decreases under carbonyl cyanide m-chlorophenyl hydrazone (CCCP) treatment. The joint use of QPCM and ls-FCS elucidates the underlying mechanism behind the reduction of FRET efficiency. The above multi-modality imaging platform enables simultaneous mapping of molecular interactions and dynamics on subcellular membranes in living cells, offering multidimensional and complementary optical readouts.
- 19 February 2026
- Published by Optica Publishing Group in Biomedical Optics Express
- Vol. 17 (3) , 1499-1511
Synergistic microscopic platform for probing molecular interaction on mitochondria-lysosome contact membrane
In biomedicine, studies on dynamic interactions between mitochondria and lysosomes are critical for understanding cellular metabolism and disease mechanisms. Yet, the interaction mechanism on the molecular level is still unclear due to a lack of suitable investigation tools. Here, we employ a synergistic microscopic platform that integrates quantitative phase contrast microscopy (QPCM), confocal fluorescent imaging, line-scanning fluorescence resonance energy transfer (ls-FRET), and line-scanning fluorescence correlation spectroscopy (ls-FCS) to reveal the mechanism of biomolecular interaction on mitochondria–lysosome contact membranes. Using ls-FRET, we quantified the FRET efficiency between (Rab7A) donors and (TOM20) acceptors situated in the mitochondrial-lysosomal contact membrane. It is found that FRET efficiency decreases under carbonyl cyanide m-chlorophenyl hydrazone (CCCP) treatment. The joint use of QPCM and ls-FCS elucidates the underlying mechanism behind the reduction of FRET efficiency. The above multi-modality imaging platform enables simultaneous mapping of molecular interactions and dynamics on subcellular membranes in living cells, offering multidimensional and complementary optical readouts.
- 17 October 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (21) , 45381-45397
Conditional diffusion model to enhance optical sectioning microscopy
Structured illumination microscopy (SIM) yields optically-sectioned images by projecting fringe patterns on a sample and laterally shifting the fringes three times. In this paper, we introduce a conditional framework entitled optically-sectioning diffusion (OSdiffuse) model for 3D microscopic imaging. This framework reconstructs a sectioned image using a single wide-field image as input. It effectively suppresses background noise similar to optical sectioning SIM (OS-SIM), but it reduces the data acquisition by threefold. Furthermore, the model enhances the axial sectioning capability twofold compared to the conventional OS-SIM approach. The effectiveness of the proposed mode was demonstrated with both simulations and experiments. We believe that the proposed method will be widely used in biological studies.
- 17 October 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (21) , 45381-45397
Conditional diffusion model to enhance optical sectioning microscopy
Structured illumination microscopy (SIM) yields optically-sectioned images by projecting fringe patterns on a sample and laterally shifting the fringes three times. In this paper, we introduce a conditional framework entitled optically-sectioning diffusion (OSdiffuse) model for 3D microscopic imaging. This framework reconstructs a sectioned image using a single wide-field image as input. It effectively suppresses background noise similar to optical sectioning SIM (OS-SIM), but it reduces the data acquisition by threefold. Furthermore, the model enhances the axial sectioning capability twofold compared to the conventional OS-SIM approach. The effectiveness of the proposed mode was demonstrated with both simulations and experiments. We believe that the proposed method will be widely used in biological studies.
- 29 April 2025
- Published by Optica Publishing Group in Biomedical Optics Express
- Vol. 16 (5) , 2184
Structured illumination optical diffraction tomography with beam-propagation-based reconstruction
Optical diffraction tomography (ODT) can reconstruct the 3D refractive index (RI) distribution of a sample, yet it faces several challenges, such as the missing cone problem and the assumption of single scattering. Herein, we implemented 3D RI imaging by combining structured-illumination-based digital holographic microscopy (SI-DHM) with beam propagation method (BPM) based reconstruction. It is found that the BPM-based reconstruction method can provide a 3D RI map with higher accuracy and a five-fold improved signal-to-noise (SNR) ratio. Meanwhile, the BPM-based method works with a small number of illumination angles, for instance, 15 illumination angles can yield a 3D RI image with a SNR = 77 dB. We envisage that the proposed technique will be widely applied for the high-resolution, label-free, and high-contrast 3D RI imaging of biological samples.
- 29 April 2025
- Published by Optica Publishing Group in Biomedical Optics Express
- Vol. 16 (5) , 2184
Structured illumination optical diffraction tomography with beam-propagation-based reconstruction
Optical diffraction tomography (ODT) can reconstruct the 3D refractive index (RI) distribution of a sample, yet it faces several challenges, such as the missing cone problem and the assumption of single scattering. Herein, we implemented 3D RI imaging by combining structured-illumination-based digital holographic microscopy (SI-DHM) with beam propagation method (BPM) based reconstruction. It is found that the BPM-based reconstruction method can provide a 3D RI map with higher accuracy and a five-fold improved signal-to-noise (SNR) ratio. Meanwhile, the BPM-based method works with a small number of illumination angles, for instance, 15 illumination angles can yield a 3D RI image with a SNR = 77 dB. We envisage that the proposed technique will be widely applied for the high-resolution, label-free, and high-contrast 3D RI imaging of biological samples.
- 2 January 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (2) , 317-320
Raman spectroscopy with a microfluidic device embedded with plasmonic metasurface
Metasurfaces offer a powerful tool to realize label-free and highly sensitive Raman spectroscopy. Embedding metasurfaces into microfluidic channels is promising to establish a new characterizing platform for microfluids. In this Letter, we present a highly stable method for improving the Raman scattering intensity of biological microfluids by using a microfluidic chip embedded with a plasmonic metasurface. The embedded metasurface consists of a nanosphere array coated with a silver layer, where the diameter of the nanosphere is ∼100 nm. The Langmuir–Blodgett method and a chemical spraying method were adopted to prepare the nanosphere-array metasurface. In the case of red blood cell measurement, a giant enhancement of Raman spectra intensity is achieved with a metasurface compared to that without a metasurface. Moreover, a two-time enhancement of Raman spectra intensity is obtained with a metasurface under radially polarized beam illumination compared to linearly polarized beam illumination. Furthermore, a microfluidic device embedded with a plasmonic metasurface was applied to monitor the environmental variation of rat red blood cells. Peaks in the range from 2143 cm−1 to 2303 cm−1 arise with the addition of glucose and are still obviously distinguishable when the additive concentration is down to 10−3 M. This indicates high sensitivity to the concentration of glucose mixed with rat red blood cells, which could be further applied to monitor biological cell environments such as glucose concentration, pH, and sodium salt concentration.
- 2 January 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (2) , 317-320
Raman spectroscopy with a microfluidic device embedded with plasmonic metasurface
Metasurfaces offer a powerful tool to realize label-free and highly sensitive Raman spectroscopy. Embedding metasurfaces into microfluidic channels is promising to establish a new characterizing platform for microfluids. In this Letter, we present a highly stable method for improving the Raman scattering intensity of biological microfluids by using a microfluidic chip embedded with a plasmonic metasurface. The embedded metasurface consists of a nanosphere array coated with a silver layer, where the diameter of the nanosphere is ∼100 nm. The Langmuir–Blodgett method and a chemical spraying method were adopted to prepare the nanosphere-array metasurface. In the case of red blood cell measurement, a giant enhancement of Raman spectra intensity is achieved with a metasurface compared to that without a metasurface. Moreover, a two-time enhancement of Raman spectra intensity is obtained with a metasurface under radially polarized beam illumination compared to linearly polarized beam illumination. Furthermore, a microfluidic device embedded with a plasmonic metasurface was applied to monitor the environmental variation of rat red blood cells. Peaks in the range from 2143 cm−1 to 2303 cm−1 arise with the addition of glucose and are still obviously distinguishable when the additive concentration is down to 10−3 M. This indicates high sensitivity to the concentration of glucose mixed with rat red blood cells, which could be further applied to monitor biological cell environments such as glucose concentration, pH, and sodium salt concentration.
- 19 March 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (7) , 12462-12475
Deep-learning based flat-fielding quantitative phase contrast microscopy
Quantitative phase contrast microscopy (QPCM) can realize high-quality imaging of sub-organelles inside live cells without fluorescence labeling, yet it requires at least three phase-shifted intensity images. Herein, we combine a novel convolutional neural network with QPCM to quantitatively obtain the phase distribution of a sample by only using two phase-shifted intensity images. Furthermore, we upgraded the QPCM setup by using a phase-type spatial light modulator (SLM) to record two phase-shifted intensity images in one shot, allowing for real-time quantitative phase imaging of moving samples or dynamic processes. The proposed technique was demonstrated by imaging the fine structures and fast dynamic behaviors of sub-organelles inside live COS7 cells and 3T3 cells, including mitochondria and lipid droplets, with a lateral spatial resolution of 245 nm and an imaging speed of 250 frames per second (FPS). We imagine that the proposed technique can provide an effective way for the high spatiotemporal resolution, high contrast, and label-free dynamic imaging of living cells.
- 19 March 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (7) , 12462-12475
Deep-learning based flat-fielding quantitative phase contrast microscopy
Quantitative phase contrast microscopy (QPCM) can realize high-quality imaging of sub-organelles inside live cells without fluorescence labeling, yet it requires at least three phase-shifted intensity images. Herein, we combine a novel convolutional neural network with QPCM to quantitatively obtain the phase distribution of a sample by only using two phase-shifted intensity images. Furthermore, we upgraded the QPCM setup by using a phase-type spatial light modulator (SLM) to record two phase-shifted intensity images in one shot, allowing for real-time quantitative phase imaging of moving samples or dynamic processes. The proposed technique was demonstrated by imaging the fine structures and fast dynamic behaviors of sub-organelles inside live COS7 cells and 3T3 cells, including mitochondria and lipid droplets, with a lateral spatial resolution of 245 nm and an imaging speed of 250 frames per second (FPS). We imagine that the proposed technique can provide an effective way for the high spatiotemporal resolution, high contrast, and label-free dynamic imaging of living cells.
- Open Access
- 10 January 2024
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 26 (5) , 2592-2598
Preparation of reusable copper-based biomass-carbon aerogel catalysts and their application in highly selective reduction of maleimides to succinimides with hydrosilane as a hydrogen source
Selective reduction is one of the most essential and frequently used transformations in organic synthesis. In this work, we developed a novel copper-based biomass-carbon aerogel catalyst (Cu(OTf)2@CAC) as a highly efficient and selective catalyst for maleimide reduction with hydrosilane as a hydrogen source for the first time. A strategy integrating chitin dissolution, nanofibrous regeneration, aerogel construction, and customizable carbonization was designed for the reduction of copper trifluoromethane sulfonate (Cu(OTf)2) to Cu(0) and Cu(I) on the CAC. The Cu(OTf)2@CAC exhibited excellent catalytic activity, chemo-selectivity, and recyclability for selective maleimide reduction to succinimides under mild conditions. Moreover, the Cu(OTf)2@CAC can be reused six times without noticeably losing activity. This work provides a representative and referential approach to achieve efficient catalytic conversion based on the reprocessing and customizable treatment of waste biomass resources.
- 10 January 2024
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 26 (5) , 2592-2598
Open AccessPreparation of reusable copper-based biomass-carbon aerogel catalysts and their application in highly selective reduction of maleimides to succinimides with hydrosilane as a hydrogen source
Selective reduction is one of the most essential and frequently used transformations in organic synthesis. In this work, we developed a novel copper-based biomass-carbon aerogel catalyst (Cu(OTf)2@CAC) as a highly efficient and selective catalyst for maleimide reduction with hydrosilane as a hydrogen source for the first time. A strategy integrating chitin dissolution, nanofibrous regeneration, aerogel construction, and customizable carbonization was designed for the reduction of copper trifluoromethane sulfonate (Cu(OTf)2) to Cu(0) and Cu(I) on the CAC. The Cu(OTf)2@CAC exhibited excellent catalytic activity, chemo-selectivity, and recyclability for selective maleimide reduction to succinimides under mild conditions. Moreover, the Cu(OTf)2@CAC can be reused six times without noticeably losing activity. This work provides a representative and referential approach to achieve efficient catalytic conversion based on the reprocessing and customizable treatment of waste biomass resources.
- 2 December 2023
- Published by Optica Publishing Group in Applied Optics
- Vol. 62 (35) , 9199-9206
Multi-harmonic structured illumination-based optical diffraction tomography
Imaging speed and spatial resolution are key factors in optical diffraction tomography (ODT), while they are mutually exclusive in 3D refractive index imaging. This paper presents a multi-harmonic structured illumination-based optical diffraction tomography (MHSI-ODT) to acquire 3D refractive index (RI) maps of transparent samples. MHSI-ODT utilizes a digital micromirror device (DMD) to generate structured illumination containing multiple harmonics. For each structured illumination orientation, four spherical spectral crowns are solved from five phase-shifted holograms, meaning that the acquisition of each spectral crown costs 1.25 raw images. Compared to conventional SI-ODT, which retrieves two spectral crowns from three phase-shifted raw images, MHSI-ODT enhances the imaging speed by 16.7% in 3D RI imaging. Meanwhile, MHSI-ODT exploits both the 1st-order and the 2nd-order harmonics; therefore, it has a better intensity utilization of structured illumination. We demonstrated the performance of MHSI-ODT by rendering the 3D RI distributions of 5 µm polystyrene (PS) microspheres and biological samples.
- 2 December 2023
- Published by Optica Publishing Group in Applied Optics
- Vol. 62 (35) , 9199-9206
Multi-harmonic structured illumination-based optical diffraction tomography
Imaging speed and spatial resolution are key factors in optical diffraction tomography (ODT), while they are mutually exclusive in 3D refractive index imaging. This paper presents a multi-harmonic structured illumination-based optical diffraction tomography (MHSI-ODT) to acquire 3D refractive index (RI) maps of transparent samples. MHSI-ODT utilizes a digital micromirror device (DMD) to generate structured illumination containing multiple harmonics. For each structured illumination orientation, four spherical spectral crowns are solved from five phase-shifted holograms, meaning that the acquisition of each spectral crown costs 1.25 raw images. Compared to conventional SI-ODT, which retrieves two spectral crowns from three phase-shifted raw images, MHSI-ODT enhances the imaging speed by 16.7% in 3D RI imaging. Meanwhile, MHSI-ODT exploits both the 1st-order and the 2nd-order harmonics; therefore, it has a better intensity utilization of structured illumination. We demonstrated the performance of MHSI-ODT by rendering the 3D RI distributions of 5 µm polystyrene (PS) microspheres and biological samples.
- Open Access
- 25 September 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (13)
Super-resolution reconstruction of structured illumination microscopy based on pixel reassignment
In this work, we report a pixel reassignment based super-resolution reconstruction algorithm for structured illumination microscopy (entitled PR-SIM). PR-SIM provides a twofold theoretical resolution enhancement by reassigning the pixels in raw SIM images with respect to the center of each illumination fringe and applying further deconvolution. By comparing with frequency domain based algorithms, PR-SIM is more immune to fringe distortion and, hence, it is more suited for large-field SIM in that it processes the raw images locally. Meanwhile, the reconstruction speed of PR-SIM can be enhanced by skipping empty regions in the image and further enhanced by employing GPU-base parallel calculation. Overall, we can envisage that the PR-SIM can be extended for other illumination modulation based microscopic techniques.
- 25 September 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (13)
Open AccessSuper-resolution reconstruction of structured illumination microscopy based on pixel reassignment
In this work, we report a pixel reassignment based super-resolution reconstruction algorithm for structured illumination microscopy (entitled PR-SIM). PR-SIM provides a twofold theoretical resolution enhancement by reassigning the pixels in raw SIM images with respect to the center of each illumination fringe and applying further deconvolution. By comparing with frequency domain based algorithms, PR-SIM is more immune to fringe distortion and, hence, it is more suited for large-field SIM in that it processes the raw images locally. Meanwhile, the reconstruction speed of PR-SIM can be enhanced by skipping empty regions in the image and further enhanced by employing GPU-base parallel calculation. Overall, we can envisage that the PR-SIM can be extended for other illumination modulation based microscopic techniques.