Arvind Singh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Arvind Singh has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Monodeep Kar
Intel Labs, Hillsboro, OR 97124 USA
8 shared publications - Saibal Mukhopadhyay
Department of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA, USA
7 shared publications - Venkata Chaitanya Krishna Chekuri
School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA, USA
7 shared publications Saibal Mukhopadhyay
Georgia Institute of Technology,School of Electronics and Computer Engineering,Atlanta,GA,USA,30318
6 shared publications- Sanu K. Mathew
Intel Labs, Intel Corporation, Hillsboro, OR, USA
4 shared publications - Vivek De
Intel Labs, Intel Corporation, Hillsboro, OR, USA
4 shared publications
Latest Publications
- 15 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 8 (22) , 16379-16394
Securing IoT Devices Using Dynamic Power Management: Machine Learning Approach
- 15 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 8 (22) , 16379-16394
Securing IoT Devices Using Dynamic Power Management: Machine Learning Approach
- 10 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 69 (3) , 3120-3130
A Low-Power Authentication IC for Visible-Light-Based Interrogation
This paper presents an integrated circuits (IC) for authentication with visible light based interrogation. The design uses on-chip DC-DC boost regulator that is powered via visible light upon interrogation. The data transfer is also performed via visible light based communication using on-chip photodiodes. An on-chip PRINCE cipher is used for encryption to provide counterfeit resistance. A prototype test-chip fabricated in 65nm CMOS consumes 2.29W standby power and achieves 53.8kbps data receive rate demonstrating ultra-low-power interrogation. Measurements of electromagnetic (EM) emission based side channel attack (SCA) show that 280,000 encryptions are necessary to reveal the secret key of the tag.
- 10 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 69 (3) , 3120-3130
A Low-Power Authentication IC for Visible-Light-Based Interrogation
This paper presents an integrated circuits (IC) for authentication with visible light based interrogation. The design uses on-chip DC-DC boost regulator that is powered via visible light upon interrogation. The data transfer is also performed via visible light based communication using on-chip photodiodes. An on-chip PRINCE cipher is used for encryption to provide counterfeit resistance. A prototype test-chip fabricated in 65nm CMOS consumes 2.29W standby power and achieves 53.8kbps data receive rate demonstrating ultra-low-power interrogation. Measurements of electromagnetic (EM) emission based side channel attack (SCA) show that 280,000 encryptions are necessary to reveal the secret key of the tag.
- 1 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Aging Challenges in On-chip Voltage Regulator Design
This paper analyzes degradation of transient performance of on-chip voltage regulators, namely, a digital low dropout regulator (DLDO) and an integrated inductive voltage regulator (IVR), due to negative-bias-temperature-instability (NBTI) induced aging degradations. Improvement of transient response for the aged systems using post silicon tuning is also explored. The measurement results from 130nm and 65nm CMOS test-chips demonstrate that an IVR exhibits a higher tolerance to power stage aging compared to DLDO. Furthermore, the measurement results indicate upto 25% improvement in response time for aging induced degradations using an auto-tuning algorithm.
- 1 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Aging Challenges in On-chip Voltage Regulator Design
This paper analyzes degradation of transient performance of on-chip voltage regulators, namely, a digital low dropout regulator (DLDO) and an integrated inductive voltage regulator (IVR), due to negative-bias-temperature-instability (NBTI) induced aging degradations. Improvement of transient response for the aged systems using post silicon tuning is also explored. The measurement results from 130nm and 65nm CMOS test-chips demonstrate that an IVR exhibits a higher tolerance to power stage aging compared to DLDO. Furthermore, the measurement results indicate upto 25% improvement in response time for aging induced degradations using an auto-tuning algorithm.
- 17 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 67 (12) , 3083-3087
An Inductive Voltage Regulator With Overdrive Tracking Across Input Voltage in Cascoded Power Stage
Integration of high frequency buck regulators with digital logic in the same die is becoming a standard for next generation processor power delivery. The input voltage of these regulators exceed well beyond the maximum voltage rating of the digital transistors. The voltage swing of the power FETs in a traditional cascoded power stage scales proportionally with the input voltage. In this paper, we propose a novel driving scheme for maintaining a constant overdrive across the power FETs in a cascoded power stage, all implemented in low-voltage digital devices. A 130nm CMOS test-chip with 25nH inductance and 33MHz switching frequency achieves a peak power-stage efficiency of 80.1% and improves the power efficiency by 5% compared to a traditional driving scheme of VIN/2 overdrive.
- 17 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 67 (12) , 3083-3087
An Inductive Voltage Regulator With Overdrive Tracking Across Input Voltage in Cascoded Power Stage
Integration of high frequency buck regulators with digital logic in the same die is becoming a standard for next generation processor power delivery. The input voltage of these regulators exceed well beyond the maximum voltage rating of the digital transistors. The voltage swing of the power FETs in a traditional cascoded power stage scales proportionally with the input voltage. In this paper, we propose a novel driving scheme for maintaining a constant overdrive across the power FETs in a cascoded power stage, all implemented in low-voltage digital devices. A 130nm CMOS test-chip with 25nH inductance and 33MHz switching frequency achieves a peak power-stage efficiency of 80.1% and improves the power efficiency by 5% compared to a traditional driving scheme of VIN/2 overdrive.
- 14 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 10 (1) , 111-122
Automated I/O Library Generation for Interposer-Based System-in-Package Integration of Multiple Heterogeneous Dies
System-in-Package (SiP) integration of multiple dies in a single package can achieve much higher performance than on-board integration of ICs while reducing the design cost/effort compared to large System-on-Chips (SoCs). However, a major challenge in design of SiPs with many dies is automated design and insertion of Input/Output (I/O) cells to minimize energy and delay of the wire traces. This paper presents an automated cell library generation flow for all-digital I/O circuits for SiP integration. Given parameterized models of SiP wire traces, our method automatically designs, optimizes, and generates layouts of I/O cells for delay/energy minimization. The proposed flow is demonstrated on interposer based SiP integration considering 28nm CMOS technology and 65nm BEOL technology. Given a multi-die SiP design and associated interposer wire-traces, this paper demonstrates that automated I/O library cell generation can reduce maximum die-to-die communication delay or energy. We demonstrate the proposed flow for various interposer parameters and SiP designs to show the feasibility of chip-interposer co-design.
- 14 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 10 (1) , 111-122
Automated I/O Library Generation for Interposer-Based System-in-Package Integration of Multiple Heterogeneous Dies
System-in-Package (SiP) integration of multiple dies in a single package can achieve much higher performance than on-board integration of ICs while reducing the design cost/effort compared to large System-on-Chips (SoCs). However, a major challenge in design of SiPs with many dies is automated design and insertion of Input/Output (I/O) cells to minimize energy and delay of the wire traces. This paper presents an automated cell library generation flow for all-digital I/O circuits for SiP integration. Given parameterized models of SiP wire traces, our method automatically designs, optimizes, and generates layouts of I/O cells for delay/energy minimization. The proposed flow is demonstrated on interposer based SiP integration considering 28nm CMOS technology and 65nm BEOL technology. Given a multi-die SiP design and associated interposer wire-traces, this paper demonstrates that automated I/O library cell generation can reduce maximum die-to-die communication delay or energy. We demonstrate the proposed flow for various interposer parameters and SiP designs to show the feasibility of chip-interposer co-design.
- 28 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 55 (2) , 478-493
Enhanced Power and Electromagnetic SCA Resistance of Encryption Engines via a Security-Aware Integrated All-Digital LDO
This article demonstrates enhanced power (P) and electromagnetic (EM) side-channel analysis (SCA) attack resistance of standard (unprotected) 128-bit advanced encryption standard (AES) engines with parallel (P-AES, 128-bit) and serial (S-AES, 8-bit) datapaths and a 128-bit SIMON engine with the bit-serial (1-bit) datapath by an on-die security-aware all-digital low-dropout (DLDO) regulator. The proposed DLDO improves SCA resistance using control-loop-induced perturbations in a nominal DLDO, enhanced by a random switching noise injector (SNI) by power-stage control and a randomized reference voltage (R-VREF) generator coupled with all-digital clock modulation (ADCM). SCA performed on the measured power/EM signatures acquired from a 130-nm CMOS testchip demonstrates up to 25x reduction in test vector leakage assessment (TVLA) leakage for P-AES and 3579x, 2182x, and 500x increase in minimum-traces-to-disclose (MTD) 80% of the subkeys for P-AES, S-AES, and SIMON cores, respectively, with respect to correlation power analysis (CPA) and correlation EM analysis (CEMA).
- 28 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 55 (2) , 478-493
Enhanced Power and Electromagnetic SCA Resistance of Encryption Engines via a Security-Aware Integrated All-Digital LDO
This article demonstrates enhanced power (P) and electromagnetic (EM) side-channel analysis (SCA) attack resistance of standard (unprotected) 128-bit advanced encryption standard (AES) engines with parallel (P-AES, 128-bit) and serial (S-AES, 8-bit) datapaths and a 128-bit SIMON engine with the bit-serial (1-bit) datapath by an on-die security-aware all-digital low-dropout (DLDO) regulator. The proposed DLDO improves SCA resistance using control-loop-induced perturbations in a nominal DLDO, enhanced by a random switching noise injector (SNI) by power-stage control and a randomized reference voltage (R-VREF) generator coupled with all-digital clock modulation (ADCM). SCA performed on the measured power/EM signatures acquired from a 130-nm CMOS testchip demonstrates up to 25x reduction in test vector leakage assessment (TVLA) leakage for P-AES and 3579x, 2182x, and 500x increase in minimum-traces-to-disclose (MTD) 80% of the subkeys for P-AES, S-AES, and SIMON cores, respectively, with respect to correlation power analysis (CPA) and correlation EM analysis (CEMA).
- Open Access
- 23 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (3) , 3242-3253
A Digital Low-Dropout Regulator With Autotuned PID Compensator and Dynamic Gain Control for Improved Transient Performance Under Process Variations and Aging
This article demonstrates all-digital tuning and dynamic control of feedback compensator in digital low drop out regulators to enhance the transient performance under process and passive variations, aging, and load changes. The measured results from a 130-nm CMOS test-chip shows 2.1× improvement in transient performance under process variations and 30% improvement for aging-induced degradations. We demonstrate 55-ns setting time for a 5 to 45 mA load step in 100 ps, with 97.8% peak current efficiency.
- 23 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (3) , 3242-3253
Open AccessA Digital Low-Dropout Regulator With Autotuned PID Compensator and Dynamic Gain Control for Improved Transient Performance Under Process Variations and Aging
This article demonstrates all-digital tuning and dynamic control of feedback compensator in digital low drop out regulators to enhance the transient performance under process and passive variations, aging, and load changes. The measured results from a 130-nm CMOS test-chip shows 2.1× improvement in transient performance under process variations and 30% improvement for aging-induced degradations. We demonstrate 55-ns setting time for a 5 to 45 mA load step in 100 ps, with 97.8% peak current efficiency.
- 20 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 27 (8) , 1768-1778
Autotuning of Integrated Inductive Voltage Regulator Using On-Chip Delay Sensor to Tolerate Process and Passive Variations
This paper demonstrates autotuning of the coefficients of the feedback loop of an inductive integrated voltage regulator (IVR) using an on-chip delay sensor. The proposed approach improves the effective performance of the digital core under variations in the on-die/package integrated passives and transistor process. A 130-nm CMOS test-chip is designed containing a multisampled 125-MHz IVR with a wirebond inductor, on-die capacitor, and all-digital proportional-integral-differential (PID) controller powering a parallel Advanced Encryption Standard (AES) engine. The autotuning is performed using a Vernier delay line based on-chip delay sensor and an all-digital tuning engine. The measurement results demonstrate up to 5.2% improvement in the maximum operating frequency of the AES core using performance-based autotuning.
- 20 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 27 (8) , 1768-1778
Autotuning of Integrated Inductive Voltage Regulator Using On-Chip Delay Sensor to Tolerate Process and Passive Variations
This paper demonstrates autotuning of the coefficients of the feedback loop of an inductive integrated voltage regulator (IVR) using an on-chip delay sensor. The proposed approach improves the effective performance of the digital core under variations in the on-die/package integrated passives and transistor process. A 130-nm CMOS test-chip is designed containing a multisampled 125-MHz IVR with a wirebond inductor, on-die capacitor, and all-digital proportional-integral-differential (PID) controller powering a parallel Advanced Encryption Standard (AES) engine. The autotuning is performed using a Vernier delay line based on-chip delay sensor and an all-digital tuning engine. The measurement results demonstrate up to 5.2% improvement in the maximum operating frequency of the AES core using performance-based autotuning.
- 13 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 54 (2) , 569-583
Improved Power/EM Side-Channel Attack Resistance of 128-Bit AES Engines With Random Fast Voltage Dithering
- 13 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 54 (2) , 569-583
Improved Power/EM Side-Channel Attack Resistance of 128-Bit AES Engines With Random Fast Voltage Dithering
- 31 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 6 (1) , 421-434
Energy Efficient and Side-Channel Secure Cryptographic Hardware for IoT-Edge Nodes
Design of ultralightweight but secure encryption engine is a key challenge for Internet-of-Things edge devices. This paper explores the system level design space for an ultralow power image sensor node for secure communication and proposes an optimized datapath architecture for 128-bit SIMON (SIMON128), a lightweight block cipher, for minimal performance, power, and area overheads with increased level of side-channel security. Various datapath architectures for SIMON are explored for simultaneously increasing energy-efficiency and resistance to power-based side-channel analysis (PSCA) attacks. Alternative datapath architectures are implemented on ASIC (15 nm CMOS) and field programmable gate array (FPGA) (Spartan-6, 45 nm) to perform power, performance, and area analysis. We show that, although a bitserial datapath minimizes area and power, a round unrolled datapath provides 80× higher energy-efficiency and 143× higher performance, compared to the baseline bitserial design. Moreover, the PSCA measurements performed using Sakura-G board with Spartan-6 FPGA, demonstrate that a 6-round unrolled datapath improves minimum-traces-to-disclosure for correlation power analysis (CPA) by at least 384× over baseline bitserial design with no successful CPA even with 500000 measurements. Finally, application to the image-sensor node demonstrates that optimized unrolled SIMON128 can provide equivalent performance to AES128 at lower area, higher energy efficiency, and improved side channel security.
- 31 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 6 (1) , 421-434
Energy Efficient and Side-Channel Secure Cryptographic Hardware for IoT-Edge Nodes
Design of ultralightweight but secure encryption engine is a key challenge for Internet-of-Things edge devices. This paper explores the system level design space for an ultralow power image sensor node for secure communication and proposes an optimized datapath architecture for 128-bit SIMON (SIMON128), a lightweight block cipher, for minimal performance, power, and area overheads with increased level of side-channel security. Various datapath architectures for SIMON are explored for simultaneously increasing energy-efficiency and resistance to power-based side-channel analysis (PSCA) attacks. Alternative datapath architectures are implemented on ASIC (15 nm CMOS) and field programmable gate array (FPGA) (Spartan-6, 45 nm) to perform power, performance, and area analysis. We show that, although a bitserial datapath minimizes area and power, a round unrolled datapath provides 80× higher energy-efficiency and 143× higher performance, compared to the baseline bitserial design. Moreover, the PSCA measurements performed using Sakura-G board with Spartan-6 FPGA, demonstrate that a 6-round unrolled datapath improves minimum-traces-to-disclosure for correlation power analysis (CPA) by at least 384× over baseline bitserial design with no successful CPA even with 500000 measurements. Finally, application to the image-sensor node demonstrates that optimized unrolled SIMON128 can provide equivalent performance to AES128 at lower area, higher energy efficiency, and improved side channel security.