BLBrian LaBombard

Brian LaBombard

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Brian LaBombard has a total of 447 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Experimental evidence for increased particle fluxes due to a change in transport at the separatrix near density limits on Alcator C-Mod

    by M.A. Miller, J.W. Hughes, T. Eich, G.R. Tynan, P. Manz, A.E. Hubbard, B. LaBombard, J. Dunsmore

    Experimental inferences of cross-field particle flux at the separatrix, Γ ⊥ sep , show rapid growth near H-mode and L-mode density limits at high magnetic field on Alcator C-Mod. Increases in Γ ⊥ sep correlate well with proximity to high density operational boundaries as proposed by the separatrix operational space model. Γ ⊥ sep grows as the L-mode density limit and the H–L-mode back transition boundaries are approached, consistent with expectations of plasma instability-driven turbulence suggested by theory, confirming the power dependence of density limits. Γ ⊥ sep is well-organized by the characteristic wavenumber for resistive ballooning mode turbulence, k RBM , from interchange-drift-Alfvén fluid turbulence theory, with additional dependence on the cylindrical safety factor, q ^ cyl , yielding an empirical limit to plasma operation of k RBM 2 q ^ cyl = 1 . This limit corresponds to the point where the perpendicular heat flux, Q ⊥ , reaches the level of the parallel heat flux, Q ∥ , i.e. Q ⊥ ≈ Q ∥ , beyond which point thermal equilibrium is not satisfied, resulting in a fold catastrophe.


  • Open Access

    Empirical impact of near-separatrix plasma and neutral transport on the pedestal in the transition between EDA and ELMy H-modes on Alcator C-Mod

    by Marco Andrés Miller, Jerry W Hughes, Samuli Saarelma, Thomas Eich, Jamie Dunsmore, Jiyun Han, Peter Manz, Jack W Connor, George R Tynan, Amanda E Hubbard, et al.

    The transition between the ELMy H-mode and the EDA H-mode is studied on Alcator C-Mod using an experimental database and recently-developed predictive pedestal models. High-resolution Thomson scattering measurements are used to inspect both the separatrix and pedestal operational space using two independent fit functions, each tailored to analyze either the pedestal or the separatrix and near-SOL profiles. The pedestal density, n e ped , and the separatrix density, n e sep are compared to main chamber neutral measurements. n e ped is sensitive to neutral sources only in the ELMy H-mode regime and not in the EDA H-mode regime. Density fluctuation spectra reveal that quasi-coherent structures become stronger at higher densities and more coherent in the EDA relative to the inter-ELM phases of ELMy H-modes, before weakening again at the highest values of n e ped . The Saarelma-Connor pedestal density prediction model is validated for ELMy H-modes up to n e ped = 2.0×10 20 m -3 . An additional transport channel driven by resistive ballooning modes (RBM), D RBM , scaling directly with α t , a collisional turbulence control parameter, and inversely with k RBM 2 q cyl , the product of the square of the characteristic RBM turbulence wavenumber and the cylindrical safety factor, is shown to improve the prediction for EDA H-modes, finding good model agreement up to n e ped = 3.0×10 20 m -3 . For comparison, EPED scans in n e ped are then performed at three values of n e sep /n e ped . Increasing this ratio moves the peeling-ballooning branch transition to lower n e ped , increasing n ped in the peeling branch and decreasing it in the ballooning branch. Agreement is found for large ELM H-modes. SPARC pedestal density predictions for an ELMy and an EDA/QCE-like H-mode are performed using the extension to the standalone Saarelma-Connor model and are found consistent with earlier assumptions used in EPED modeling. Inclusion of D RBM significantly weakens the density gradient near the separatrix, lowering n e ped by approximately 20%.

  • Open Access

    Multimachine analysis of intermittent fluctuations in the scrape-off layer of magnetically confined fusion plasmas

    by S Ahmed, S Allan, J-G Bak, J A Boedo, W G Fuller, O E Garcia, W Han, J Horacek, A Kirk, H S Kim, et al.

    Far scrape-off layer fluctuations, also known as blobs/filaments, are compared for the first time across six tokamaks: Alcator C-Mod, DIII-D, TCV, KSTAR, MAST, and MAST-U, under the context of stochastic modeling in Ohmic and low confinement mode scenarios. In this model, which well describes these fluctuations, measurements from Langmuir probes are modeled as a superposition of uncorrelated, two-sided exponential temporal pulses. The key parameters of this model are the mean waiting times between consecutive pulses, the pulse duration times and the mean of the pulse amplitudes. The study examines the influence of line-averaged density, plasma current, magnetic field and aspect ratio. The mean amplitudes and pulse waiting times increase with the line-averaged density across devices, while the pulse duration times remain constant. Whereas the variation in waiting times is gradual across the density scan, the mean amplitudes increase abruptly as the density profile broadens and flattens for Alcator C-Mod. The blob waiting times decrease with increasing plasma current and the toroidal magnetic field, while they increase with aspect ratio for conventional tokamaks. The duration times follow the same trends as the waiting times in these parameters but vary more slowly, resulting in the trends in the waiting times dominating the intermittency level of the fluctuations.

  • Open Access

    Velocity scaling regimes for blob-like filaments in the Alcator C-Mod scrape-off layer

    by O E Garcia, J M Losada, O Paikina, A Theodorsen, B LaBombard, J L Terry, M Wigram, A Q Kuang

    Blob sizes and velocities in the scrape-off layer of the Alcator C-Mod tokamak are analysed using gas puff imaging diagnostics for a series of Ohmically heated, lower single-null diverted plasmas with varying core plasma densities. Results reveal that both average blob size and radial velocity increase gradually with core plasma density, transitioning from sheath-connected to resistive velocity scaling regimes as the empirical discharge density limit is approached. The normalized blob sizes and velocities are comparable to those reported from other devices but the regime transitions differs. The findings presented here provide new insights into the role of collisionality in scrape-off layer transport and its implications for plasma–surface interactions. Predictions for blob parameters in the SPARC tokamak suggest similar scaling regimes, emphasizing the relevance of these results for next-generation fusion devices.


  • Open Access

    Blob motion and flattened far-SOL profiles in Alcator C-Mod: evidence in support of stochastic modeling

    by O.E. Garcia, A.D. Helgeland, J.M. Losada, O. Paikina, A. Theodorsen, A.Q. Kuang, B. LaBombard, J.L. Terry

    Fluctuations in the boundary region of the Alcator C-Mod device are investigated with mirror Langmuir probe and gas puff imaging measurements in a series of experiments with a scan in core plasma density. This reveals the familiar broadening and flattening of the radial electron density profile in the scrape-off layer (SOL). A time delay estimation method is applied to deduce blob velocities at various radial positions within the boundary region. In discharges characterized by low core plasma density, the dynamics of blobs manifest in the far SOL, exhibiting radial velocities reaching up to 0.5 km s − 1 . As the core plasma density approaches the empirical discharge density limit, blob dynamics come to dominate the entire SOL, extending even inside the last closed magnetic flux surface with radial velocities exceeding 1 km s − 1 . The fluctuations measured at any given location within the gas puff imaging field-of-view display pronounced intermittency in the region primarily governed by blob structures. Both the radial profiles and the fluctuations are in agreement with a stochastic model describing the blobs as a super-position of uncorrelated pulses moving radially outwards, predicting a particle density profile e-folding length given by the product of the radial blob velocity and the parallel loss time. With increasing core plasma density, the blobs move faster, the average particle density in the far SOL increases and the fluctuations become more intermittent, which will result in enhanced plasma–surface interactions.


  • Open Access

    Determination of confinement regime boundaries via separatrix parameters on Alcator C-Mod based on a model for interchange-drift-Alfvén turbulence

    by M.A. Miller, J.W. Hughes, T. Eich, G.R. Tynan, P. Manz, T. Body, D. Silvagni, O. Grover, A.E. Hubbard, A. Cavallaro, et al.

    The separatrix operational space (SepOS) model (Eich and Manz 2021 Nucl. Fusion 61 086017) is shown to predict the L–H transition, the L-mode density limit, and the ideal magnetohydrodynamic ballooning limit in terms of separatrix parameters for a wide range of Alcator C-Mod plasmas. The model is tested using Thomson scattering measurements across a wide range of operating conditions on C-Mod, spanning n ― e = 0.3–5.5 × 10 20 m−3, B t = 2.5 –8.0 T, and B p = 0.1–1.2 T. An empirical regression for the electron pressure gradient scale length, λ p e , against a turbulence control parameter, α t , and the poloidal fluid gyroradius, ρ s , p , is constructed for H-modes and found to require positive exponents for both regression parameters, indicating turbulence widening of near-scrape-off layer widths at high α t and an inverse scaling with B p , consistent with results on ASDEX Upgrade. The SepOS model is also tested in the unfavorable drift direction and found to apply well to all three boundaries, including the L–H transition as long as a correction to the Reynolds energy transfer term, α RS < 1 is applied. I-modes typically exist in the unfavorable drift direction for values of α t ≲ 0.3 . Finally, an experiment studying the transition between the Type-I ELMy and EDA H-mode is analyzed using the same framework. It is found that a recently identified boundary at α t = 0.55 excludes most EDA H-modes but that the balance of wavenumbers responsible for the L-mode density limit, namely k EM = k RBM , may better describe the transition on C-Mod. The ensemble of boundaries validated and explored is then applied to project regime access and limit avoidance for the SPARC primary reference discharge parameters.


  • Open Access

    The low frequency edge oscillation in alcator C-Mod and ASDEX upgrade I-mode

    by W McCarthy, A E Hubbard, J Terry, B Labombard, A Kuang, R Bielajew, I Hutchinson, J W Hughes, D Silvagni, T Happel, et al.

    The low frequency edge oscillation (LFEO) is a low frequency fluctuation in many plasma quantities in the pedestal region of the I-Mode confinement regime. It is observed on Alcator C-Mod between 10–30 kHz and on ASDEX Upgrade between 5–10 kHz. On both tokamaks it has been previously identified as a geodesic acoustic mode (GAM), however the recent discovery of the edge temperature ring oscillation (ETRO) in a similar frequency and spatial location as the LFEO in I-Modes on EAST has called this identification into question. In this paper we investigate the LFEO on C-Mod and AUG using a variety of different experimental techniques including spectral analysis, magnetic mode number analysis, localization, and direct measurement of the LFEO zonal structure and propagation using a mirror Langmuir probe. This investigation has reconfirmed the identification of the LFEO as a GAM and determined that it has several key differences from the ETRO.


  • Statistics on AB-Plane Offsets in REBCO Coated Conductors and Implications for Non-Twisted Magnets

    by J. L. Cheng, Ashleigh Francis, Maise Shepard, Yingtai Chen, Justin Gonzalez, Corey Plant, Catherine Judd, Melanie Russo, Jan Jaroszynski, James Logan, et al.

    The critical current (Ic) of 2G REBa2Cu3O7-x (REBCO) high temperature superconductors (HTS) is highly anisotropic with respect to the applied magnetic field (B), with a strong Ic peak expressed at B||ab-plane of the HTS crystal structure. However, as manufactured, there is typically a small-angle ab-plane tilt offset relative to the plane of the tape, and a large average offset can significantly affect magnet Ic if unaccounted for, especially in non-twisted coils such as the SPARC toroidal field magnets being developed by Commonwealth Fusion Systems (CFS). To address this issue, the statistics of the magnitude and orientation of the ab-offset were studied on quick time scales in production quantities for two different HTS vendors by X-Ray Diffraction (XRD) using (005) rocking curves, and the offset was observed to be vendor dependent. The data were correlated positively with offsets determined by SEM, and to Ic at low temperature and moderate to high field by transport and torque magnetometry.


  • Open Access

    Cross-code comparison of the edge codes SOLPS-ITER, SOLEDGE2D and UEDGE in modelling a high-power neon-seeded scenario in the DTT

    by M. Moscheni, M. Wigram, H. Wu, C. Meineri, C. Carati, E. De Marchi, M. Greenwald, P. Innocente, B. LaBombard, F. Subba, et al.

    In this work, we cross-compare the state-of-the-art edge plasma codes SOLPS-ITER, SOLEDGE2D, and UEDGE in a reactor-relevant neon-seeded Divertor Tokamak Test scenario at nominal power, extending the simplified test-bed of Moscheni et al (2022 Nucl. Fusion 62 056009). Converged solutions targeting the same separatrix density and radiated power are obtained by adjusting the pumping albedo and the neon puffing rate. This higher-power scenario is generally characterised by substantial disagreement between the three codes, up to 78%–178% in peak heat fluxes. Discrepancies found in Moscheni et al (2022 Nucl. Fusion 62 056009) are indeed exacerbated, and new ones arise. Underlying causes include the over-penetration of neutrals implied by the unified ion-neutral temperature of UEDGE (observed in Moscheni et al (2022 Nucl. Fusion 62 056009)), here resulting in a 38%–114% over-estimation of core plasma densities. The particular set of EIRENE atomic-molecular reactions adopted is found to stiffly restrict the achievable code solutions, which results in the predicted effective charge Z eff changing from ∼ 5 to ∼ 8 at the outer mid-plane separatrix. The strong link between Z eff, main ion density and unified ion temperature emphasises the need of proper assessments of impurity cross-field transport, with its implications on core contamination and wall erosion. The advantages of extended plasma meshes are found to come with associated modelling intricacies, yet to be fully characterised but seemingly impacting on the activity around the secondary X-point of single-null magnetic topologies. An appreciable impurity particle imbalance, generated by the neon ion density floor, is noted—speculatively contributing to SOLEDGE2D’s different radiation emission distribution, and expected to be even more deleterious for high-Z impurities in all the codes. Potential drivers of further discrepancies are the different Braginskii formulations of collision times and momentum sources in presence of impurities, and the SOLPS-ITER extra terms gaining importance around the detachment front. Outstanding questions unanswered in this work prompt further investigations.


  • Open Access

    Comment on ‘Relationship between magnetic field and tokamak size—a system engineering perspective and implications to fusion development’

    by A.J. Creely, D. Brunner, T. Eich, M.J. Greenwald, B. LaBombard, R.T. Mumgaard, M. Segal, B.N. Sorbom, D.G. Whyte

    The recent Federici et al (2024 Nucl. Fusion 64 036025) article makes the argument that higher magnetic fields cannot reduce the size and cost of a tokamak-based fusion power plant due to: structural considerations of the toroidal field (TF) coils, the required thickness for neutron shielding and the blanket, and challenges with heat exhaust in the divertor. This conclusion is based on a series of assumptions that are design decisions made by the authors, not fundamental limits on physics or engineering. This Comment demonstrates that the conclusions of Federici et al are invalid if one makes different design choices and that its results are therefore not broadly generalizable.