Woo Kyun Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Woo Kyun Kim has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
Aditya Kavalur
Department of Mechanical and Materials Engineering, University of Cincinnati, Cincinnati, OH, USA
2 shared publications- Moon Ki Kim
School of Mechanical Engineering Sungkyunkwan University Suwon Republic of Korea
2 shared publications Sangjae Seo
Supercomputing Application Center, Division of National Supercomputing Korea Institute of Science and Technology Information Daejeon Republic of Korea
2 shared publicationsSoon Woo Park
School of Mechanical Engineering Sungkyunkwan University Suwon Republic of Korea
2 shared publications- Abdullah Al Amin
Department of Mechanical and Aerospace Engineering University of Dayton 300 College Park Drive 45469 Dayton OH
1 shared publication - Aditya Kavalur
Science and Technology Division Corning Research and Development Corporation Corning New York USA
1 shared publication
Latest Publications
- Open Access
- 22 September 2026
- Published by Elsevier in SSRN Electronic Journal
Atomistic Simulations of the Roles of Contact Geometry and Interatomic Potentials in the Deformation and Failure of Single-Crystal Silicon Nanocolumns under Compression
Atomistic simulations were performed to investigate the deformation and failure of single-crystal silicon nanocolumns under compression using five interatomic potentials: Stillinger--Weber (SW), modified T3 Tersoff (T3C), Modified Embedded Atom Method (MEAM), ReaxFF, and LSNAP. Nanocolumns with widths W of 100, 200, and 400 A were compressed using cylindrical punches with radii of either R = W/2 or a fixed R = 100 A to examine the effects of column size and contact geometry. The predicted deformation and failure behaviors depend strongly on the interatomic potential, column size, and contact geometry. SW and T3C exhibit predominantly slip-mediated and cleavage-type failure, respectively, with increasingly brittle behavior as column size increases. MEAM predominantly produces ductile deformation through slip without distinct crack opening, whereas ReaxFF predicts phase transformations in the smallest columns followed by slip and cracking in larger columns. LSNAP generally exhibits fracture-dominated behavior. Fixed-radius simulations produce more localized deformation and stronger stress concentrations with increasing column width, substantially affecting the onset and mode of failure. Analysis of normalized tensile and shear stresses provides further insight into the mechanisms governing slip and crack formation. Experimental observations indicate ductile deformation in smaller silicon pillars and axial cracking in larger pillars, consistent with the MEAM and several other potentials, respectively. These results demonstrate the importance of interatomic potential selection and contact geometry in atomistic predictions of nanoscale silicon deformation and failure.
- 22 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAtomistic Simulations of the Roles of Contact Geometry and Interatomic Potentials in the Deformation and Failure of Single-Crystal Silicon Nanocolumns under Compression
Atomistic simulations were performed to investigate the deformation and failure of single-crystal silicon nanocolumns under compression using five interatomic potentials: Stillinger--Weber (SW), modified T3 Tersoff (T3C), Modified Embedded Atom Method (MEAM), ReaxFF, and LSNAP. Nanocolumns with widths W of 100, 200, and 400 A were compressed using cylindrical punches with radii of either R = W/2 or a fixed R = 100 A to examine the effects of column size and contact geometry. The predicted deformation and failure behaviors depend strongly on the interatomic potential, column size, and contact geometry. SW and T3C exhibit predominantly slip-mediated and cleavage-type failure, respectively, with increasingly brittle behavior as column size increases. MEAM predominantly produces ductile deformation through slip without distinct crack opening, whereas ReaxFF predicts phase transformations in the smallest columns followed by slip and cracking in larger columns. LSNAP generally exhibits fracture-dominated behavior. Fixed-radius simulations produce more localized deformation and stronger stress concentrations with increasing column width, substantially affecting the onset and mode of failure. Analysis of normalized tensile and shear stresses provides further insight into the mechanisms governing slip and crack formation. Experimental observations indicate ductile deformation in smaller silicon pillars and axial cracking in larger pillars, consistent with the MEAM and several other potentials, respectively. These results demonstrate the importance of interatomic potential selection and contact geometry in atomistic predictions of nanoscale silicon deformation and failure.
- Open Access
- 29 September 2025
- Published by Elsevier in Journal of Physics and Chemistry of Solids
- Vol. 209
Prediction of Raman signatures, electronic structure, and ion transport mechanisms in Nb2C and Nb2CO2 MXenes for Li/Na-ion batteries: An Ab Initio study
- 29 September 2025
- Published by Elsevier in Journal of Physics and Chemistry of Solids
- Vol. 209
Open AccessPrediction of Raman signatures, electronic structure, and ion transport mechanisms in Nb2C and Nb2CO2 MXenes for Li/Na-ion batteries: An Ab Initio study
- 25 February 2025
- Published by Wiley in Protein Science
- Vol. 34 (3) , e70073
An accelerated molecular dynamics study for investigating protein pathways using the bond‐boost hyperdynamics method
Molecular dynamics (MD) simulation is an important tool for understanding protein dynamics and the thermodynamic properties of proteins. However, due to the high computational cost of MD simulations, it is still challenging to explore a wide conformational space. To solve this problem, a variety of accelerated MD (aMD) schemes have been proposed over the past few decades. The bond‐boost method (BBM) is one of such aMD schemes, which expedites escape events from energy basins by adding a bias potential based on changes in bond length. In this paper, we present a new methodology based on the BBM for accelerating the conformational transition of proteins. In our modified BBM, the bias potential is constructed using the dihedral angle and hydrogen bond, which are more suitable variables to monitor the conformational change in proteins. Additionally, we have developed an efficient algorithm compatible with the Large‐scale Atomic/Molecular Massively Parallel Simulator (LAMMPS) package. The method is validated with the conformational change of ribose binding protein and adenylate kinase by comparing the conventional and accelerated MD simulation results. Based on the aMD results, the characteristics of the proteins are investigated by monitoring the conformational transition pathways. Moreover, the free energy landscape calculated using umbrella sampling confirms all the states identified by the aMD simulation are the free energy minima, and the system makes transitions following the path indicated by the free energy landscape. Our efficient approach is expected to play a key role in investigating transition pathways in a wide range of protein simulations.
- 25 February 2025
- Published by Wiley in Protein Science
- Vol. 34 (3) , e70073
An accelerated molecular dynamics study for investigating protein pathways using the bond‐boost hyperdynamics method
Molecular dynamics (MD) simulation is an important tool for understanding protein dynamics and the thermodynamic properties of proteins. However, due to the high computational cost of MD simulations, it is still challenging to explore a wide conformational space. To solve this problem, a variety of accelerated MD (aMD) schemes have been proposed over the past few decades. The bond‐boost method (BBM) is one of such aMD schemes, which expedites escape events from energy basins by adding a bias potential based on changes in bond length. In this paper, we present a new methodology based on the BBM for accelerating the conformational transition of proteins. In our modified BBM, the bias potential is constructed using the dihedral angle and hydrogen bond, which are more suitable variables to monitor the conformational change in proteins. Additionally, we have developed an efficient algorithm compatible with the Large‐scale Atomic/Molecular Massively Parallel Simulator (LAMMPS) package. The method is validated with the conformational change of ribose binding protein and adenylate kinase by comparing the conventional and accelerated MD simulation results. Based on the aMD results, the characteristics of the proteins are investigated by monitoring the conformational transition pathways. Moreover, the free energy landscape calculated using umbrella sampling confirms all the states identified by the aMD simulation are the free energy minima, and the system makes transitions following the path indicated by the free energy landscape. Our efficient approach is expected to play a key role in investigating transition pathways in a wide range of protein simulations.
- Open Access
An accelerated molecular dynamics study for investigating protein pathways using the bond-boost hyperdynamics method
Molecular dynamics (MD) simulation is an important tool for understanding protein dynamics and the thermodynamic properties of proteins. However, due to the high computational cost of MD simulations, it is still challenging to explore a wide conformational space. To solve this problem, a variety of accelerated MD schemes have been proposed over the past few decades. The bond-boost method (BBM) is one of such accelerated MD schemes, which expedites escape events from energy basins by adding a bias potential based on changes in bond length. In this paper, we present a new methodology based on the BBM for accelerating the conformational transition of proteins. In our modified BBM, the bias potential is constructed using the dihedral angle and hydrogen bond, which are more suitable variables to monitor the conformational change in proteins. Additionally, we have developed an efficient algorithm compatible with the LAMMPS package. The method is validated with the conformational change of Adenylate kinase (AdK) by comparing the conventional and accelerated MD simulation results. Based on the accelerated MD results, the characteristics of AdK are investigated by monitoring the conformational transition pathways and the behavior of interdomain salt bridges. Moreover, the free energy landscape calculated using umbrella sampling confirms all the states identified by the accelerated MD simulation are the free energy minima and the system makes transitions following the path indicated by the free energy landscape. Our efficient approach is expected to play a key role in investigating transition pathways in a wide range of protein simulations.
Open AccessAn accelerated molecular dynamics study for investigating protein pathways using the bond-boost hyperdynamics method
Molecular dynamics (MD) simulation is an important tool for understanding protein dynamics and the thermodynamic properties of proteins. However, due to the high computational cost of MD simulations, it is still challenging to explore a wide conformational space. To solve this problem, a variety of accelerated MD schemes have been proposed over the past few decades. The bond-boost method (BBM) is one of such accelerated MD schemes, which expedites escape events from energy basins by adding a bias potential based on changes in bond length. In this paper, we present a new methodology based on the BBM for accelerating the conformational transition of proteins. In our modified BBM, the bias potential is constructed using the dihedral angle and hydrogen bond, which are more suitable variables to monitor the conformational change in proteins. Additionally, we have developed an efficient algorithm compatible with the LAMMPS package. The method is validated with the conformational change of Adenylate kinase (AdK) by comparing the conventional and accelerated MD simulation results. Based on the accelerated MD results, the characteristics of AdK are investigated by monitoring the conformational transition pathways and the behavior of interdomain salt bridges. Moreover, the free energy landscape calculated using umbrella sampling confirms all the states identified by the accelerated MD simulation are the free energy minima and the system makes transitions following the path indicated by the free energy landscape. Our efficient approach is expected to play a key role in investigating transition pathways in a wide range of protein simulations.
- Open Access
- 10 August 2024
- Published by Elsevier in Computational Materials Science
- Vol. 244
Theoretical and molecular dynamics studies of critical resolved shear stress for rhombohedral twinning of sapphire
- 10 August 2024
- Published by Elsevier in Computational Materials Science
- Vol. 244
Open AccessTheoretical and molecular dynamics studies of critical resolved shear stress for rhombohedral twinning of sapphire
- Open Access
- 11 July 2022
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 123 (20) , 4916-4934
Free energy calculation and ghost force correction for hot‐QC
A new efficient variant of hot‐QC, the finite temperature version of the quasicontinuum (QC) method, is presented. In the original formulation of hot‐QC, a dynamically evolving atomistic region is coupled with either a dynamic (hot‐QC‐dynamic) or a static (hot‐QC‐static) continuum region. In the current work, a free energy minimization method is employed in which atom positions in both the atomistic and continuum regions always occupy equilibrium positions. The effect of ghost forces at the interface of the atomistic and continuum regions is discussed for all three variants of hot‐QC using two examples: a perfect cubic crystal and a Lomer dislocation dipole. Errors due to ghost forces and due to mesh entropy are considered and the efficacy of their correction terms are evaluated. It is shown that the proposed free energy minimization method has comparable accuracy to the other methods with significantly higher efficiency.
- 11 July 2022
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 123 (20) , 4916-4934
Open AccessFree energy calculation and ghost force correction for hot‐QC
A new efficient variant of hot‐QC, the finite temperature version of the quasicontinuum (QC) method, is presented. In the original formulation of hot‐QC, a dynamically evolving atomistic region is coupled with either a dynamic (hot‐QC‐dynamic) or a static (hot‐QC‐static) continuum region. In the current work, a free energy minimization method is employed in which atom positions in both the atomistic and continuum regions always occupy equilibrium positions. The effect of ghost forces at the interface of the atomistic and continuum regions is discussed for all three variants of hot‐QC using two examples: a perfect cubic crystal and a Lomer dislocation dipole. Errors due to ghost forces and due to mesh entropy are considered and the efficacy of their correction terms are evaluated. It is shown that the proposed free energy minimization method has comparable accuracy to the other methods with significantly higher efficiency.
- 16 July 2020
- Published by Taylor & Francis in Molecular Simulation
- Vol. 46 (12) , 911-922
Effects of Langevin friction and time steps in the molecular dynamics simulation of nanoindentation
In the simplest form of molecular dynamics (MD), the system evolves according to Newton's equations of motion with its total energy conserved. Moreover, to model systems at constant temperatures, a modified set of equations of motion, called a thermostat, can be used. Langevin thermostat with one parameter called the Langevin friction coefficient is a popular thermostat, but problems may arise when it is applied to nonequilibrium systems without tuning the friction coefficient. Additionally, the size of MD time step also plays a pivotal role in determining accuracy and efficiency. In this study, we consider the effects of time step and Langevin friction on MD simulations. First, we evaluate the effectiveness of the Langevin thermostat for different combinations of time step and friction coefficient. Second, nanoindentation of Nickel crystals are carried out for five different combinations of Langevin friction and time steps. The simulation results reveal noticeable differences in mechanical properties as the dynamics changes from a constant energy to constant temperature simulations with increasing friction coefficients. The structural characteristics are also quantified using the common neighbour analysis, centrosymmetry parameter and dislocation analysis, all of which show a similar trend of more atoms being deformed with increasing friction.
- 16 July 2020
- Published by Taylor & Francis in Molecular Simulation
- Vol. 46 (12) , 911-922
Effects of Langevin friction and time steps in the molecular dynamics simulation of nanoindentation
In the simplest form of molecular dynamics (MD), the system evolves according to Newton's equations of motion with its total energy conserved. Moreover, to model systems at constant temperatures, a modified set of equations of motion, called a thermostat, can be used. Langevin thermostat with one parameter called the Langevin friction coefficient is a popular thermostat, but problems may arise when it is applied to nonequilibrium systems without tuning the friction coefficient. Additionally, the size of MD time step also plays a pivotal role in determining accuracy and efficiency. In this study, we consider the effects of time step and Langevin friction on MD simulations. First, we evaluate the effectiveness of the Langevin thermostat for different combinations of time step and friction coefficient. Second, nanoindentation of Nickel crystals are carried out for five different combinations of Langevin friction and time steps. The simulation results reveal noticeable differences in mechanical properties as the dynamics changes from a constant energy to constant temperature simulations with increasing friction coefficients. The structural characteristics are also quantified using the common neighbour analysis, centrosymmetry parameter and dislocation analysis, all of which show a similar trend of more atoms being deformed with increasing friction.
- 1 July 2020
- Published by Elsevier in Computational Materials Science
- Vol. 180
A comparison study between the Lennard-Jones and DRIP potentials for friction of graphene layers
- 1 July 2020
- Published by Elsevier in Computational Materials Science
- Vol. 180
A comparison study between the Lennard-Jones and DRIP potentials for friction of graphene layers
- Top Cited PapersOpen Access
- 23 March 2020
- Published by IOP Publishing in Modelling and Simulation in Materials Science and Engineering
- Vol. 28 (4) , 043001
Roadmap on multiscale materials modeling
Modeling and simulation is transforming modern materials science, becoming an important tool for the discovery of new materials and material phenomena, for gaining insight into the processes that govern materials behavior, and, increasingly, for quantitative predictions that can be used as part of a design tool in full partnership with experimental synthesis and characterization. Modeling and simulation is the essential bridge from good science to good engineering, spanning from fundamental understanding of materials behavior to deliberate design of new materials technologies leveraging new properties and processes. This Roadmap presents a broad overview of the extensive impact computational modeling has had in materials science in the past few decades, and offers focused perspectives on where the path forward lies as this rapidly expanding field evolves to meet the challenges of the next few decades. The Roadmap offers perspectives on advances within disciplines as diverse as phase field methods to model mesoscale behavior and molecular dynamics methods to deduce the fundamental atomic-scale dynamical processes governing materials response, to the challenges involved in the interdisciplinary research that tackles complex materials problems where the governing phenomena span different scales of materials behavior requiring multiscale approaches. The shift from understanding fundamental materials behavior to development of quantitative approaches to explain and predict experimental observations requires advances in the methods and practice in simulations for reproducibility and reliability, and interacting with a computational ecosystem that integrates new theory development, innovative applications, and an increasingly integrated software and computational infrastructure that takes advantage of the increasingly powerful computational methods and computing hardware.
- 23 March 2020
- Published by IOP Publishing in Modelling and Simulation in Materials Science and Engineering
- Vol. 28 (4) , 043001
Top Cited PapersOpen AccessRoadmap on multiscale materials modeling
Modeling and simulation is transforming modern materials science, becoming an important tool for the discovery of new materials and material phenomena, for gaining insight into the processes that govern materials behavior, and, increasingly, for quantitative predictions that can be used as part of a design tool in full partnership with experimental synthesis and characterization. Modeling and simulation is the essential bridge from good science to good engineering, spanning from fundamental understanding of materials behavior to deliberate design of new materials technologies leveraging new properties and processes. This Roadmap presents a broad overview of the extensive impact computational modeling has had in materials science in the past few decades, and offers focused perspectives on where the path forward lies as this rapidly expanding field evolves to meet the challenges of the next few decades. The Roadmap offers perspectives on advances within disciplines as diverse as phase field methods to model mesoscale behavior and molecular dynamics methods to deduce the fundamental atomic-scale dynamical processes governing materials response, to the challenges involved in the interdisciplinary research that tackles complex materials problems where the governing phenomena span different scales of materials behavior requiring multiscale approaches. The shift from understanding fundamental materials behavior to development of quantitative approaches to explain and predict experimental observations requires advances in the methods and practice in simulations for reproducibility and reliability, and interacting with a computational ecosystem that integrates new theory development, innovative applications, and an increasingly integrated software and computational infrastructure that takes advantage of the increasingly powerful computational methods and computing hardware.
- 13 March 2020
- Published by Elsevier in Computational Materials Science
- Vol. 178, 109636
Role of boundary conditions and thermostats in the uniaxial tensile loading of silicon nanowires
- 13 March 2020
- Published by Elsevier in Computational Materials Science
- Vol. 178, 109636
Role of boundary conditions and thermostats in the uniaxial tensile loading of silicon nanowires