Serkan Yeşilot
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Serkan Yeşilot has a total of 71 co-authors. Here are the top co-authors by number of shared publications:
- Rezan Demir-Cakan
Department of Chemical Engineering, Gebze Technical University, 41400, Gebze, Kocaeli, Turkey
5 shared publications - Süreyya Oğuz Tümay
Department of Chemistry, Atatürk University, Erzurum 25240, Türkiye
5 shared publications - Ahmet Şenocak
Gebze Technical University
4 shared publications Sedat Küçükköylü
Gebze Technical University Department of Chemistry P.O.Box Gebze 41400 Turkey
4 shared publicationsSüreyya Oğuz Tümay
Department of Chemistry, Gebze Technical University, Gebze, 41400, Kocaeli, Turkey
4 shared publications- Aylin Uslu
Department of Chemistry, Gebze Technical University, Kocaeli, Turkey
3 shared publications
Latest Publications
- 22 September 2025
- Published by Royal Society of Chemistry (RSC) in The Analyst
- Vol. 150 (19) , 4320-4331
A pyrene-modified carbon nanodot as a fluorescence nanosensor for nitroaniline herbicide detection and smartphone-assisted RGB analysis using hydrogel detection kits
A novel pyrene-modified carbon nanodot-based fluorescence sensor enabled highly sensitive and selective detection of nitroaniline herbicides in soil, with a detection limit of 1.50 nmol L −1 and smartphone-based hydrogel kit application.
- 22 September 2025
- Published by Royal Society of Chemistry (RSC) in The Analyst
- Vol. 150 (19) , 4320-4331
A pyrene-modified carbon nanodot as a fluorescence nanosensor for nitroaniline herbicide detection and smartphone-assisted RGB analysis using hydrogel detection kits
A novel pyrene-modified carbon nanodot-based fluorescence sensor enabled highly sensitive and selective detection of nitroaniline herbicides in soil, with a detection limit of 1.50 nmol L −1 and smartphone-based hydrogel kit application.
- 23 July 2025
- Published by Wiley in Chemphyschem
- p. e2500422
Exploring Pillar[6]quinone as Cathode Material for Aqueous Zinc‐Ion Batteries
Quinone cathodes have wide application prospects in aqueous zinc‐ion batteries (AZIBs) due to their high performance, structural diversity, sustainability, high specific capacity, and fast reaction kinetics. Herein, pillar[6]quinone (P6Q), a member of the quinone group, is used as a cathode in AZIBs for the first time. The P6Q structure consisting of six benzoquinone units with a higher cavity than the quinone structures with small molecule structures is found to greatly improve the cycling stability of the cathode. The P6Q electrode exhibits remarkable electrochemical stability and a long‐term cycle life (discharge capacity of 118 mAh g−1 and capacity retention of 83% after 10 000 cycles at current density of 50C). In addition, density functional theory calculations and ex situ characterization methods such as ultraviolet–visible spectroscopy, X‐ray photoelectron spectroscopy, and Fourier‐transform infrared spectroscopy are used to clarify the possible coordination mechanism between P6Q and Zn2+/H+ ions.
- 23 July 2025
- Published by Wiley in Chemphyschem
- p. e2500422
Exploring Pillar[6]quinone as Cathode Material for Aqueous Zinc‐Ion Batteries
Quinone cathodes have wide application prospects in aqueous zinc‐ion batteries (AZIBs) due to their high performance, structural diversity, sustainability, high specific capacity, and fast reaction kinetics. Herein, pillar[6]quinone (P6Q), a member of the quinone group, is used as a cathode in AZIBs for the first time. The P6Q structure consisting of six benzoquinone units with a higher cavity than the quinone structures with small molecule structures is found to greatly improve the cycling stability of the cathode. The P6Q electrode exhibits remarkable electrochemical stability and a long‐term cycle life (discharge capacity of 118 mAh g−1 and capacity retention of 83% after 10 000 cycles at current density of 50C). In addition, density functional theory calculations and ex situ characterization methods such as ultraviolet–visible spectroscopy, X‐ray photoelectron spectroscopy, and Fourier‐transform infrared spectroscopy are used to clarify the possible coordination mechanism between P6Q and Zn2+/H+ ions.
- 3 April 2024
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 196 (5) , 1-22
Investigation of organic micropollutant pollution in İzmit Bay: a comparative study of passive sampling and instantaneous sampling techniques
In this study, we used a comprehensive array of sampling techniques to examine the pollution caused by organic micropollutants in İzmit Bay for the first time. Our methodology contains spot seawater sampling, semi-permeable membrane devices (SPMDs) passive samplers for time-weighted average (TWA), and sediment sampling for long-term pollution detection in İzmit Bay, together. Additionally, the analysis results obtained with these three sampling methods were compared in this study. Over the course of two seasons in 2020 and 2021, we deployed SPMDs for 21 days in the first season and for 30 days in the second season. This innovative approach allowed us to gather sea water samples and analyze them for the presence of polycyclic aromatic hydrocarbons (Σ15 PAHs), polychlorinated biphenyls (Σ7 PCBs), and organochlorine pesticides (Σ11 OCPs). Using SPMD-based passive sampling, we measured micropollutant concentrations: PAHs ranged from 1963 to 10342 pg/L in 2020 and 1338 to 6373 pg/L in 2021; PCBs from 17.46 to 61.90 pg/L in 2020 and 8.37 to 78.10 pg/L in 2021; and OCPs from 269.2 to 8868 pg/L in 2020 and 141.7 to 1662 pg/L in 2021. Our findings revealed parallels between the concentrations of PAHs, PCBs, and OCPs in both SPMDs and sediment samples, providing insights into the distribution patterns of these pollutants in the marine ecosystem. However, it is worth noting that due to limited data acquisition, the suitability of spot sampling in comparison to instantaneous sampling remains inconclusive, highlighting the need for further investigation and data collection.
- 3 April 2024
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 196 (5) , 1-22
Investigation of organic micropollutant pollution in İzmit Bay: a comparative study of passive sampling and instantaneous sampling techniques
In this study, we used a comprehensive array of sampling techniques to examine the pollution caused by organic micropollutants in İzmit Bay for the first time. Our methodology contains spot seawater sampling, semi-permeable membrane devices (SPMDs) passive samplers for time-weighted average (TWA), and sediment sampling for long-term pollution detection in İzmit Bay, together. Additionally, the analysis results obtained with these three sampling methods were compared in this study. Over the course of two seasons in 2020 and 2021, we deployed SPMDs for 21 days in the first season and for 30 days in the second season. This innovative approach allowed us to gather sea water samples and analyze them for the presence of polycyclic aromatic hydrocarbons (Σ15 PAHs), polychlorinated biphenyls (Σ7 PCBs), and organochlorine pesticides (Σ11 OCPs). Using SPMD-based passive sampling, we measured micropollutant concentrations: PAHs ranged from 1963 to 10342 pg/L in 2020 and 1338 to 6373 pg/L in 2021; PCBs from 17.46 to 61.90 pg/L in 2020 and 8.37 to 78.10 pg/L in 2021; and OCPs from 269.2 to 8868 pg/L in 2020 and 141.7 to 1662 pg/L in 2021. Our findings revealed parallels between the concentrations of PAHs, PCBs, and OCPs in both SPMDs and sediment samples, providing insights into the distribution patterns of these pollutants in the marine ecosystem. However, it is worth noting that due to limited data acquisition, the suitability of spot sampling in comparison to instantaneous sampling remains inconclusive, highlighting the need for further investigation and data collection.
- Open Access
- 18 January 2024
- Published by Wiley in ChemElectroChem
- Vol. 11 (4)
Ethylene Glycol‐Containing Acrylic Polyphosphazene Based Cathode Materials via Inverse Vulcanization of Sulfur for Li−S Batteries
The cell performance of Li−S batteries can be improved by establishing compatibility with the electrolyte of cathode and enhancing lithium‐ion diffusion (ionic conductivity) or electrical conductivity. In this work, we introduce cathode material based on ethylene glycol‐containing acrylic polyphosphazene. Poly[(2acrylamidoethoxy)‐random‐(methoxyethoxyethoxy)] phosphazenes were synthesized by macromolecular substitution of poly(dichloro)phosphazene with 2‐acrylamidoethanol and diethylene glycol methyl ether in two different ratios (25 and 50 mol% of ethylene glycol methyl ether), abbreviated as MP‐25EG and MP‐50EG, where ethylene glycol chains enhance the electrolyte compatibility and ion transport of the sulfur cathode material. Then, poly[S‐random‐(2acrylamidoethoxy)‐random‐(methoxyethoxyethoxy)] phosphazene polymers, designated as MP‐25EG‐xS or MP‐50EG‐xS (x=50 and 80 wt.% of sulfur) were prepared by inverse vulcanization of polymer with two feed sulfur ratios. Structural characterizations of the polymers were carried out using appropriate standard spectroscopic methods such as 1H and 31P NMR, FT‐IR, DSC and TGA as well as XPS. The electrochemical performance of MP‐25EG‐50S, MP‐25EG‐80S and MP‐50EG‐50S, MP‐50EG‐80S were evaluated and the effect of ethylene glycol was investigated by comparing cell performances. MP‐50EG‐50S demonstrated its promising applicability in Li–S batteries by exhibiting much better electrochemical respond with a discharge capacity of 745 mAh/g at C/5 current density over 100 cycles.
- 18 January 2024
- Published by Wiley in ChemElectroChem
- Vol. 11 (4)
Open AccessEthylene Glycol‐Containing Acrylic Polyphosphazene Based Cathode Materials via Inverse Vulcanization of Sulfur for Li−S Batteries
The cell performance of Li−S batteries can be improved by establishing compatibility with the electrolyte of cathode and enhancing lithium‐ion diffusion (ionic conductivity) or electrical conductivity. In this work, we introduce cathode material based on ethylene glycol‐containing acrylic polyphosphazene. Poly[(2acrylamidoethoxy)‐random‐(methoxyethoxyethoxy)] phosphazenes were synthesized by macromolecular substitution of poly(dichloro)phosphazene with 2‐acrylamidoethanol and diethylene glycol methyl ether in two different ratios (25 and 50 mol% of ethylene glycol methyl ether), abbreviated as MP‐25EG and MP‐50EG, where ethylene glycol chains enhance the electrolyte compatibility and ion transport of the sulfur cathode material. Then, poly[S‐random‐(2acrylamidoethoxy)‐random‐(methoxyethoxyethoxy)] phosphazene polymers, designated as MP‐25EG‐xS or MP‐50EG‐xS (x=50 and 80 wt.% of sulfur) were prepared by inverse vulcanization of polymer with two feed sulfur ratios. Structural characterizations of the polymers were carried out using appropriate standard spectroscopic methods such as 1H and 31P NMR, FT‐IR, DSC and TGA as well as XPS. The electrochemical performance of MP‐25EG‐50S, MP‐25EG‐80S and MP‐50EG‐50S, MP‐50EG‐80S were evaluated and the effect of ethylene glycol was investigated by comparing cell performances. MP‐50EG‐50S demonstrated its promising applicability in Li–S batteries by exhibiting much better electrochemical respond with a discharge capacity of 745 mAh/g at C/5 current density over 100 cycles.
- Open Access
- 31 October 2023
- Published by The Scientific and Technological Research Council of Turkey (TUBITAK-ULAKBIM) - DIGITAL COMMONS JOURNALS in TURKISH JOURNAL OF CHEMISTRY
- Vol. 47 (5) , 1296-1306
Synthesis, characterization, and photophysical and fluorescence sensor behaviors of a new water-soluble double-bridged naphthalene diimide appended cyclotriphosphazene
A new water-soluble template of double-bridged naphthalene diimide appended cyclotriphosphazene was prepared, and its photophysical and sensor behaviors were evaluated. The characterization of novel double-bridged naphthalene diimide appended cyclotriphosphazene (6) was carried out by NMR (1 H, 13C, 31P) and mass spectroscopies. The photophysical behaviors of compound 6 were evaluated by UV-Vis absorption and fluorescence spectroscopies in various solvent systems and different concentrations. As an application for usability of the obtained water-soluble template in different applications, the fluorescence sensor property of compound 6 was investigated in the presence of many different competing species (organic acids, saccharides, nitroaromatic compounds, anions, and metal cations). The results obtained showed that compound 6 had selectivity against only the nitroaromatic species among the competing species tested.
- 31 October 2023
- Published by The Scientific and Technological Research Council of Turkey (TUBITAK-ULAKBIM) - DIGITAL COMMONS JOURNALS in TURKISH JOURNAL OF CHEMISTRY
- Vol. 47 (5) , 1296-1306
Open AccessSynthesis, characterization, and photophysical and fluorescence sensor behaviors of a new water-soluble double-bridged naphthalene diimide appended cyclotriphosphazene
A new water-soluble template of double-bridged naphthalene diimide appended cyclotriphosphazene was prepared, and its photophysical and sensor behaviors were evaluated. The characterization of novel double-bridged naphthalene diimide appended cyclotriphosphazene (6) was carried out by NMR (1 H, 13C, 31P) and mass spectroscopies. The photophysical behaviors of compound 6 were evaluated by UV-Vis absorption and fluorescence spectroscopies in various solvent systems and different concentrations. As an application for usability of the obtained water-soluble template in different applications, the fluorescence sensor property of compound 6 was investigated in the presence of many different competing species (organic acids, saccharides, nitroaromatic compounds, anions, and metal cations). The results obtained showed that compound 6 had selectivity against only the nitroaromatic species among the competing species tested.
- 18 February 2023
- Published by Springer Nature in Photochemical & Photobiological Sciences
- Vol. 22 (6) , 1429-1444
A water-soluble small molecular fluorescent sensor based on phosphazene platform for selective detection of nitroaromatic compounds
Nitro-aromatic compounds have a deleterious effect on the environment and they are extremely explosive. Therefore, societal concern about exposure to nitro-aromatic compounds encourages researchers to develop selective and sensitive detection platforms for nitro-aromatic compounds in recent years. In this paper, a new 100% water-soluble cyclotriphosphazene-based bridged naphthalene material (4) was prepared as a small molecule fluorescent sensor for ultra-selective detection of nitro-aromatic compounds. The chemical structure of 4 was extensively characterized by mass spectrometry and nuclear magnetic resonance spectroscopies (31P, 13C, 1H). The photo-physical properties of the newly developed sensing system were investigated by steady-state fluorescence and UV–Vis absorption spectroscopies. The fluorescence sensor behaviors were extensively evaluated after treatment with the most commonly used metal cations, anions, competitive aromatic compounds, saccharides, and organic acids. The developed fluorescent sensing system (4) demonstrated ultra-selective fluorescence “turn-off” signal change toward nitro-aromatic compounds while other tested competitive species caused negligible changes. To evaluate selectivity, time-resolved, steady-state 3D-fluorescence and UV–Vis absorption spectroscopies were used in fully aqueous media. Moreover, theoretical calculations (density functional theory and time-dependent density functional theory) were applied and discussed to identify fluorescence sensing mechanisms toward nitroaromatic compounds for the presented sensing system. Graphical abstract
- 18 February 2023
- Published by Springer Nature in Photochemical & Photobiological Sciences
- Vol. 22 (6) , 1429-1444
A water-soluble small molecular fluorescent sensor based on phosphazene platform for selective detection of nitroaromatic compounds
Nitro-aromatic compounds have a deleterious effect on the environment and they are extremely explosive. Therefore, societal concern about exposure to nitro-aromatic compounds encourages researchers to develop selective and sensitive detection platforms for nitro-aromatic compounds in recent years. In this paper, a new 100% water-soluble cyclotriphosphazene-based bridged naphthalene material (4) was prepared as a small molecule fluorescent sensor for ultra-selective detection of nitro-aromatic compounds. The chemical structure of 4 was extensively characterized by mass spectrometry and nuclear magnetic resonance spectroscopies (31P, 13C, 1H). The photo-physical properties of the newly developed sensing system were investigated by steady-state fluorescence and UV–Vis absorption spectroscopies. The fluorescence sensor behaviors were extensively evaluated after treatment with the most commonly used metal cations, anions, competitive aromatic compounds, saccharides, and organic acids. The developed fluorescent sensing system (4) demonstrated ultra-selective fluorescence “turn-off” signal change toward nitro-aromatic compounds while other tested competitive species caused negligible changes. To evaluate selectivity, time-resolved, steady-state 3D-fluorescence and UV–Vis absorption spectroscopies were used in fully aqueous media. Moreover, theoretical calculations (density functional theory and time-dependent density functional theory) were applied and discussed to identify fluorescence sensing mechanisms toward nitroaromatic compounds for the presented sensing system. Graphical abstract
- 2 August 2022
- Published by Elsevier in Biosensors and Bioelectronics
- Vol. 216, 114612
Hexa-BODIPY-cyclotriphosphazene based nanoparticle for NIR fluorescence/photoacoustic dual-modal imaging and photothermal cancer therapy
- 2 August 2022
- Published by Elsevier in Biosensors and Bioelectronics
- Vol. 216, 114612
Hexa-BODIPY-cyclotriphosphazene based nanoparticle for NIR fluorescence/photoacoustic dual-modal imaging and photothermal cancer therapy
- 24 September 2021
- Published by Wiley in Energy Technology
- Vol. 9 (12)
Halogen‐Free Polyphosphazene‐Based Flame Retardant Cathode Materials for Li–S Batteries
Novel, eco‐friendly, and halogen‐free polyphosphazene‐based flame retardant (FR) cathodes for Li–S batteries are prepared by the inverse vulcanization of elemental sulfur with polybis(2‐acrylamidoethoxy)phosphazene (poly(AAE)) resulting in the covalently bonded different wt% sulfur content polymers. Due to the polar amide groups, poly(AAE)‐xS (x refer to the wt% of sulfur) composites assist in anchoring intermediate lithium polysulfide species. The structural characterizations of the poly(AAE)‐xS polymers are conducted by elemental analysis, Fourier‐transform infrared spectroscopy, differential scanning calorimeter, thermogravimetric analysis, and scanning electron microscopy. Their FR properties are elevated by calculation of the limiting oxygen index values and burning tests. Later, lithium‐ion storage mechanism of poly(AAE)‐55S polymer is evaluated, including cyclic voltammetry, rate performance tests and electrochemical impedance spectroscopy measurements. To compare with the electrochemical performance of poly(AAE)‐55S, a noncovalent blend polymer mixture and bare sulfur are also tested. It is found that covalently bonded poly(AAE)‐55S obtained by the inverse vulcanization of elemental sulfur and poly(AAE) results much pronounced capacities. Herein, new insights into the design and development of alternative cathode materials for safer Li–S batteries, both providing FR properties and good lithium polysulfides adsorption capabilities, are offered.
- 24 September 2021
- Published by Wiley in Energy Technology
- Vol. 9 (12)
Halogen‐Free Polyphosphazene‐Based Flame Retardant Cathode Materials for Li–S Batteries
Novel, eco‐friendly, and halogen‐free polyphosphazene‐based flame retardant (FR) cathodes for Li–S batteries are prepared by the inverse vulcanization of elemental sulfur with polybis(2‐acrylamidoethoxy)phosphazene (poly(AAE)) resulting in the covalently bonded different wt% sulfur content polymers. Due to the polar amide groups, poly(AAE)‐xS (x refer to the wt% of sulfur) composites assist in anchoring intermediate lithium polysulfide species. The structural characterizations of the poly(AAE)‐xS polymers are conducted by elemental analysis, Fourier‐transform infrared spectroscopy, differential scanning calorimeter, thermogravimetric analysis, and scanning electron microscopy. Their FR properties are elevated by calculation of the limiting oxygen index values and burning tests. Later, lithium‐ion storage mechanism of poly(AAE)‐55S polymer is evaluated, including cyclic voltammetry, rate performance tests and electrochemical impedance spectroscopy measurements. To compare with the electrochemical performance of poly(AAE)‐55S, a noncovalent blend polymer mixture and bare sulfur are also tested. It is found that covalently bonded poly(AAE)‐55S obtained by the inverse vulcanization of elemental sulfur and poly(AAE) results much pronounced capacities. Herein, new insights into the design and development of alternative cathode materials for safer Li–S batteries, both providing FR properties and good lithium polysulfides adsorption capabilities, are offered.
- 24 January 2021
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 25 (4) , 1271-1281
Novel K+-doped Na0.6Mn0.35Fe0.35Co0.3O2 cathode materials for sodium-ion batteries: synthesis, structures, and electrochemical properties
- 24 January 2021
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 25 (4) , 1271-1281
Novel K+-doped Na0.6Mn0.35Fe0.35Co0.3O2 cathode materials for sodium-ion batteries: synthesis, structures, and electrochemical properties
- 13 January 2021
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 50 (7) , 2324-2341
Recent advances in the supramolecular assembly of cyclophosphazene derivatives
There is still room for improvement in supramolecular systems based on cyclophosphazene derivatives and their potential applications.
- 13 January 2021
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 50 (7) , 2324-2341
Recent advances in the supramolecular assembly of cyclophosphazene derivatives
There is still room for improvement in supramolecular systems based on cyclophosphazene derivatives and their potential applications.