YXYu Xin

Yu Xin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Yu Xin has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A dynamic meshing transmission dataset for manufacturing quality inspection of electric vehicle reducer gears

    by Dong Guo, Junjie Yang, Honglin Li, Yingjie Huang, Xiaoxiang Long, Yu Xin, Ming Li

    The NVH (Noise, Vibration, Harshness) performance of electric vehicle reducer gears directly affects the NVH level of the whole vehicle. However, the existing single gear quality detection methods based on tooth surface waviness are faced with two major challenges, which are unable to detect quickly and cannot fully characterize the real performance. This work introduces the first real industrial dataset for manufacturing quality inspection of electric vehicle reducer gears to solve these two challenges and provide data benchmarks. This dataset covers the dynamic meshing transmission data of five types of manufacturing offline gears (healthy gears, slight bump gears, leaky grinding gears, and two kinds of ghost order whine gears). And a variety of uncertain factors in the manufacturing process (different machine tools, different batches, different device control parameters, etc.) are introduced to avoid the influence of laboratory ideal conditions on signal characteristics. The data quality of this dataset was evaluated using a 1D-CNN classifier and benchmarked against WTGCM, MCC5-THU, and AGFD, where it exhibited superior performance.


  • Open Access

    A Variable-Scale Attention Mechanism Guided Time-Frequency Feature Fusion Transfer Learning Method for Bearing Fault Diagnosis in an Annealing Kiln Roller System

    by Yu Xin, Kangqu Zhou, Songlin Liu, Tianchuang Liu

    Effective real-time health condition monitoring of the roller table and through shaft bearings in the annealing kiln roller system of glass production lines is crucial for maintaining their operational safety and stability for the quality and production efficiency of glass products. However, the collected vibration signal of the roller bearing system is affected by the low rotating frequency and strong mechanical background noise, which shows the width impact interval and non-stationary multi-component characteristics. Moreover, the distribution characteristics of monitoring data and probability of fault occurrence of the roller bearing and through shaft bearing improve the difficulty of the fault diagnosis and condition monitoring of the annealing kiln roller system, as well as the reliance on professional experience and prior knowledge. Therefore, this paper proposes a variable-scale attention mechanism guided time-frequency feature fusion transfer learning method for a bearing fault diagnosis at different installation positions in an annealing kiln roller system. Firstly, the instinct time decomposition method and the Gini–Kurtosis composed index are used to decompose and reconstruct the signal for noise reduction, wavelet transform with the Morlet basic function is used to extract the time-frequency features, and histogram equalization is introduced to reform the time-frequency map for the blur and implicit time-frequency features. Secondly, a variable-scale attention mechanism guided time-frequency feature fusion framework is established to extract multiscale time-dependency features from the time-frequency representation for the distinguished fault diagnosis of roller table bearings. Then, for through shaft bearings, the vibration signal of the roller table bearing is used as the source domain and the signal of the through shaft bearing is used as the target domain, based on the feature fusion framework and the multi-kernel maximum mean differences metric function, and the transfer diagnosis method is proposed to reduce the distribution differences and extract the across-domain invariant feature to diagnose the through shaft bearing fault speed under different working conditions, using a small sample. Finally, the effectiveness of the proposed method is verified based on the vibration signal from the experimental platform and the roller bearing system of the glass production line. Results show that the proposed method can effectively diagnose roller table and through shaft bearings’ fault information in the annealing kiln roller system.

  • Open Access

    Intelligent fault diagnosis method for rotating machinery based on vibration signal analysis and hybrid multi‐object deep CNN

    by Yu Xin, Shunming Li, Jinrui Wang, Zenghui An, Wei Zhang

    Traditional labour‐intensive methods always suffer from time and frequency blurring and cross‐term interference when detecting fault features from vibration signals and their time–frequency representation. Such methods need essential expertise and prior knowledge to identify features. Intelligent fault diagnosis methods based on deep learning have attracted great attention because of their ability to automatically learn the representative features in fault diagnosis. Therefore, a novel multi‐object deep convolutional neural network (CNN) is proposed to diagnose the faults. In this method, time domain, frequency domain, and time–frequency data are organised as the hybrid multi‐object input to avoid the shortcoming of the single type of data, which cannot reveal abundant information about amplitude and frequency in vibration signals. Deep CNN with four convolutional layers is constructed to intelligently learn the distinguished features. The adjacent convolutional layer is used to sensitively capture slight changes in the input data, and the other layers are used to extract and reduce the abundant features. Random forest is used to accurately classify the fault types. The vibration signal of cylinder rolling bearing and gearbox is used to validate the proposed method. The results are compared with those of other state‐of‐the‐art methods to show the superior performance of the proposed method.


  • Open Access

    A novel compound fault diagnosis method using intrinsic component filtering

    by Zongzhen Zhang, Shunming Li, Yu Xin, Huijie Ma

    The compound fault diagnosis of gearboxes, which can prevent breakdown accidents and minimize production loss, has become a challenging hotspot. In practical applications, the early fault signal is weak and often concealed by environmental noise. Therefore, separating the different fault components from signals with weak faults and strong noise is the key to performing compound fault diagnosis. In this paper, a novel compound fault diagnosis method based on intrinsic component filtering is proposed for compound fault diagnosis, which can also be regarded as a multi-dimension blind deconvolution method. Firstly, a Hankel matrix is constructed from the collected vibration data. Secondly, the filter matrix is trained by intrinsic component filtering in an unsupervised way without any time-consuming preprocessing or a prior basis. Finally, Hilbert demodulation analysis is conducted on the filtered data. Different fault components can be diagnosed according to the envelope spectra of the fault components. The separation performance of the proposed method is validated by the simulation data and the experiment signals in a noisy environment. The results show that the proposed method can train the different filters using the compound fault adaptively, demonstrating superior performance to existing methods.


  • Open Access

    Adaptive Cross-Domain Feature Extraction Method and Its Application on Machinery Intelligent Fault Diagnosis Under Different Working Conditions

    by Zenghui An, Shunming Li, Xingxing Jiang, Yu Xin, Jinrui Wang

    Transfer learning based models have been employed for intelligent fault diagnosis under different working conditions. However, an actual and important problem is neglected in existing intelligent fault diagnosis methods, which is that target domain mechanical fault datasets are always highly imbalanced with abundant normal condition mechanical samples but a paucity of samples from rare fault conditions. To solve this actual problem, this paper proposed a novel adaptive cross-domain feature extraction (ACFE) method which can automatically extract similar features between different feature spaces. ACFE wants to obtain more information for determining the category of each training target sample, so it avoids the distribution adaptation and is suitable for the imbalanced problem. Specifically, high dimensional distance through kernel method is employed for ensuring the strong identify ability first. Then, for automatically extracting cross-domain feature, we calculate the posterior probability of category of each target domain training sample based on high dimensional distance, and employ entropy loss to capture the cross-domain information. Besides, we propose the guide loss to avoid the features of a category overall falling into false category caused by imbalanced dataset. Based on ACFE, the intelligent fault diagnosis method for dealing with the imbalanced target dataset is described. To verify the effectiveness, we carry out two specially designed experiments, and the results shows that, comparing with related method, the proposed method achieve a superior performance.


  • An intelligent fault diagnosis framework dealing with arbitrary length inputs under different working conditions

    by Zenghui An, Shunming Li, Yu Xin, Kun Xu, Huijie Ma

    As fault diagnosis for motor drive systems enters the era of big data, intelligent fault diagnosis methods exhibit excellent performance because of their learning capabilities. However, the existing methods are strict with the signal size, which reduces the performance of these methods for modern condition monitoring. Besides, most existing intelligent methods have a great limitation: the training data and testing data are under the same working conditions. To overcome these limitations, we propose a novel three-layer model inspired by a recurrent neural network (RNN) and transfer learning, which has the ability to process variable size sequences under different working conditions. In the first layer, the input unit is extended to ensure that there is adequate dimension to store the information of sequences. In the second layer, the main information of the whole sequence is stored, transmitted, transformed and output by gates. In the final layer, softmax is employed to classify the health conditions based on the output of the RNN with a long short-term memory cell. The classification loss based on the whole framework and the domain loss using kernel method are proposed to train the model. Furthermore, a bearing dataset is adopted to verify the effectiveness of the proposed method. The experimental results show that the proposed method can not only break the limitations of existing methods, but also achieve a superior performance compared with related methods.


  • Novel data-driven short-frequency mutual information entropy threshold filtering and its application to bearing fault diagnosis

    by Yu Xin, Shunming Li

    A rotating mechanical vibration signal is time-varying and non-stationary because of the effect of defects on the rotating components and working conditions. The commonly used short-time Fourier transform (STFT) divides the time-domain signal into several segments by a sliding window. However, the STFT cannot optimize the time and frequency resolution. Considerable prior knowledge and much expertise are needed to further analyze these complex vibration signals. Therefore, a novel processing method comprising a fault vibration signal and named short-frequency mutual information entropy threshold filtering is proposed to filter and reconstruct the non-stationary vibration signal for diagnosing the impulse fault features. In this method, the improved STFT with an adaptive optimal window length is used to transform the vibration signal into the time-frequency domain. Then, a Meyer wavelet filter bank is used to divide the frequency spectrum into several sub-bands in each moment. The minimum mutual information entropy between the sub-bands and the original frequency is used to remove the partial sub-bands and filter the useful features from each frequency spectrum. Then, the frequency spectra are rearranged and an inverse STFT is used to recover the original signal. The envelope spectrum method is used to extract the fault features from the recovered signal. This method is completely determined by the characteristics of the vibration signal data. Finally, the fault vibration signal from our testing rig and wind turbine gearbox are used to verify the performance of the proposed method. The results show that this method can efficiently detect impact fault features in the vibration signal.


  • Open Access

    Adaptive Reinforced Empirical Morlet Wavelet Transform and Its Application in Fault Diagnosis of Rotating Machinery

    by Yu Xin, Shunming Li, Zongzhen Zhang, Zenghui An, Jinrui Wang

    Identifying impact fault features from fault vibration signal is significantly meaningful for the fault diagnosis and condition monitoring of rotating machinery. Given defects and the working conditions, impact features are covered by background noise. A new method named empirical wavelet transform (EWT) has been receiving attention from researchers and engineers. However, detecting boundaries by using the local maxima method from Fourier spectra and capturing the impact features through Meyer wavelet are the two crucial drawbacks of EWT. The former might be invalidated by the influence of non-stationary and noise frequency, and the latter is inappropriate for impact signal features. Therefore, reinforced empirical Morlet wavelet transform (REMWT) is proposed to overcome these shortcomings and efficiently diagnose fault features. In this method, the frequency spectrum boundaries are adaptively detected from the inner product of spectral kurtosis and Gaussian function via scale space representation, which can enhance the frequency character of impact features in vibration signals. Then, the constructed empirical Morlet wavelet serves as the adaptive filter bank for decomposing the signal into several empirical modes on the basis of spectrum boundaries. The meaningful component is selected via the maximum Pearson correlation coefficient method, and the envelope spectrum is used to accurately extract the fault features. The proposed method is then used to diagnose the fault features from collected vibration signals. Results show its effectiveness and outstanding performance.


  • Construction of a batch-normalized autoencoder network and its application in mechanical intelligent fault diagnosis

    by Jinrui Wang, Shunming Li, Baokun Han, Zenghui An, Yu Xin, Weiwei Qian, Qijun Wu

    Among various fault diagnosis methods, deep learning has shown state-of-the-art performance in processing mechanical big data. This paper investigates a reliable deep learning method known as autoencoder, which is most suitable for automatic feature extraction of fault signals. However, traditional autoencoders have two deficiencies: (1) the multi-layer structure of autoencoder has an internal covariate shift problem, which will cause great difficulty for the network training. (2) The application of autoencoder in the case of rotating speed fluctuation is not mature. To overcome the aforementioned deficiencies, batch normalization strategy is employed in every layer of the autoencoder network to obtain a steady distribution of activation values during training. It can regularize the network without parameter adjustment, and deal with the speed fluctuation problem perfectly. So, a new network named batch-normalized autoencoder is first proposed for intelligent fault diagnosis. The raw vibration signals are directly fed into the network and the extracted features are employed to train a softmax classifier for health state identification. A bearing and a gearbox data set are finally used to confirm the effectiveness of the proposed method. The results manifest that the proposed method can extract salient features from the raw signals and handle the fault diagnosis problem under the speed fluctuation problem.