Liliana Beatriz Jimenez
Research Subjects
Liliana Beatriz Jimenez has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Marcelo Puiatti
INFIQC
3 shared publications Carlos J. Rivas
Departamento de Química Orgánica, Facultad de Ciencias Químicas, Universidad Nacional de Córdoba. INFIQC, Instituto de Investigaciones en Físicoquímica de Córdoba (CONICET-UNC). Córdoba X5000HUA, Argentina
2 shared publications- Federico Brigante
Fondazione OnFoods, via Università 12, Parma 43121, Italy; Traceability Unit, Research and Innovation Centre, Fondazione Edmund Mach (FEM), Via E. Mach 1, 38098 San Michele all'Adige, Italy
2 shared publications - Gustavo Ariel Pino
Universidad Nacional de Córdoba
2 shared publications - Leandro D. Mena
Universidad Nacional de Córdoba
2 shared publications María T. Baumgartner
Departamento de Química Orgánica, Facultad de Ciencias Químicas, Universidad Nacional de Córdoba, Haya de la Torre y Medina Allende, Ciudad Universitaria. Córdoba, X5000HUA, Argentina
2 shared publications
Latest Publications
- 30 September 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 130 (41) , 8110-8119
Substituent Size Effects on the Photophysics of 1-Aryloxy-perylene Bisimide Monomers and Aggregates: A Bay -Substitution Study
This study explores the effects of 1-substitution of perylene bisimides (PBIs) with aryloxy groups on their photophysical features and aggregation equilibria. The main variables considered for this purpose were the size of the aryloxy substituent, the solvent, and the analytical concentration. In all cases, aggregate formation was monitored by observing the concentration dependence of the spectral features. Our results led us to conclude that the resulting aggregates exhibit an H-type signature and that the substituent hinders self-assembly. Compared to the reference unsubstituted homologue, the insertion of an aryloxy group proved to be an optimal strategy for modulating the photophysical features of both monomers and aggregates. A detailed discussion is presented herein.
- 30 September 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 130 (41) , 8110-8119
Substituent Size Effects on the Photophysics of 1-Aryloxy-perylene Bisimide Monomers and Aggregates: A Bay -Substitution Study
This study explores the effects of 1-substitution of perylene bisimides (PBIs) with aryloxy groups on their photophysical features and aggregation equilibria. The main variables considered for this purpose were the size of the aryloxy substituent, the solvent, and the analytical concentration. In all cases, aggregate formation was monitored by observing the concentration dependence of the spectral features. Our results led us to conclude that the resulting aggregates exhibit an H-type signature and that the substituent hinders self-assembly. Compared to the reference unsubstituted homologue, the insertion of an aryloxy group proved to be an optimal strategy for modulating the photophysical features of both monomers and aggregates. A detailed discussion is presented herein.
- 15 October 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 129 (43) , 9951-9961
Influence of Sulfur Oxidation States on the Photophysical Properties of Naphthalimide-Based Donor–Acceptor Systems
This study explores the correlation between the photophysical properties and the oxidation state of the sulfur bridge in NI-SOn-PhOMe (n = 0, 1, 2), which connects naphthalimide and p-methoxyphenyl units. The investigations were conducted in solution and in the solid state, with comparisons made to NI-PhOMe, where the two moieties are directly linked via a carbon-carbon bond. In the sulfur-bridged derivatives, aggregation-induced emission (AIE) was observed, the characteristics of which are influenced by intermolecular interactions and the nature of the medium in which insoluble aggregates form. In contrast, NI-PhOMe exhibited conventional solvatochromism typical of donor-acceptor (D-A) push-pull systems. A detailed analysis is presented on the influence of the oxidation state of the sulfur atom on key properties, including the D-A character induced by naphthalimide substitution, as well as the charge transfer (CT) contribution that governs its photophysical behavior.
- 15 October 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 129 (43) , 9951-9961
Influence of Sulfur Oxidation States on the Photophysical Properties of Naphthalimide-Based Donor–Acceptor Systems
This study explores the correlation between the photophysical properties and the oxidation state of the sulfur bridge in NI-SOn-PhOMe (n = 0, 1, 2), which connects naphthalimide and p-methoxyphenyl units. The investigations were conducted in solution and in the solid state, with comparisons made to NI-PhOMe, where the two moieties are directly linked via a carbon-carbon bond. In the sulfur-bridged derivatives, aggregation-induced emission (AIE) was observed, the characteristics of which are influenced by intermolecular interactions and the nature of the medium in which insoluble aggregates form. In contrast, NI-PhOMe exhibited conventional solvatochromism typical of donor-acceptor (D-A) push-pull systems. A detailed analysis is presented on the influence of the oxidation state of the sulfur atom on key properties, including the D-A character induced by naphthalimide substitution, as well as the charge transfer (CT) contribution that governs its photophysical behavior.
- Open Access
- 22 November 2024
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 6 (12) , 9142-9153
Influence of the Chemical Structure of Perylene Derivatives on the Performance of Honey-Gated Organic Field-Effect Transistors (HGOFETs) and Their Application in UV Light Detection
Electronics based on natural or degradable materials are a key requirement for next-generation devices, where sustainability, biodegradability, and resource efficiency are essential. In this context, optimizing the molecular chemical structure of organic semiconductor compounds (OSCs) used as active layers is crucial for enhancing the efficiency of these devices, making them competitive with conventional electronics. In this work, honey-gated organic field-effect transistors (HGOFETs) were fabricated using four different perylene derivative films as OSCs, and the impact of the chemical structure of these perylene derivatives on the performance of HGOFETs was investigated. HGOFETs were fabricated using naturally occurring or low-impact materials in an effort to produce sustainable systems that degrade into benign end products at the end of their life. It is shown that the second chain of four carbons at the imide position present in perylenes N,N '-bis(5-nonyl)-perylene-3,4,9,10-bis(dicarboximide) (PDI) and N,N '-bis(5-nonyl)-1-naphthoxyperylene-3,4,9,10-bis(dicarboximide) (PDI-ONaph) reduces pi-stacking interaction in the active layer, leading to lower AC conductivity and the non-functionality of HGOFETs. On the other side, the chain-on molecular orientation in the film of N,N '-dibutylperylen-3,4:9,10-bis(dicarboximide) (BuPTCD) was fundamental for the efficiency of HGOFETs, showing a better performance than the HGOFETs of N,N '-bis(2-phenylethyl)-3,4:9,10-bis(dicarboximide) (PhPTCD), which has a face-on molecular orientation. Finally, the HGOFETs of BuPTCD and PhPTCD are good candidates as UV light detectors and are used for the detection of UV radiation.
- 22 November 2024
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 6 (12) , 9142-9153
Open AccessInfluence of the Chemical Structure of Perylene Derivatives on the Performance of Honey-Gated Organic Field-Effect Transistors (HGOFETs) and Their Application in UV Light Detection
Electronics based on natural or degradable materials are a key requirement for next-generation devices, where sustainability, biodegradability, and resource efficiency are essential. In this context, optimizing the molecular chemical structure of organic semiconductor compounds (OSCs) used as active layers is crucial for enhancing the efficiency of these devices, making them competitive with conventional electronics. In this work, honey-gated organic field-effect transistors (HGOFETs) were fabricated using four different perylene derivative films as OSCs, and the impact of the chemical structure of these perylene derivatives on the performance of HGOFETs was investigated. HGOFETs were fabricated using naturally occurring or low-impact materials in an effort to produce sustainable systems that degrade into benign end products at the end of their life. It is shown that the second chain of four carbons at the imide position present in perylenes N,N '-bis(5-nonyl)-perylene-3,4,9,10-bis(dicarboximide) (PDI) and N,N '-bis(5-nonyl)-1-naphthoxyperylene-3,4,9,10-bis(dicarboximide) (PDI-ONaph) reduces pi-stacking interaction in the active layer, leading to lower AC conductivity and the non-functionality of HGOFETs. On the other side, the chain-on molecular orientation in the film of N,N '-dibutylperylen-3,4:9,10-bis(dicarboximide) (BuPTCD) was fundamental for the efficiency of HGOFETs, showing a better performance than the HGOFETs of N,N '-bis(2-phenylethyl)-3,4:9,10-bis(dicarboximide) (PhPTCD), which has a face-on molecular orientation. Finally, the HGOFETs of BuPTCD and PhPTCD are good candidates as UV light detectors and are used for the detection of UV radiation.
- 25 January 2024
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 89 (4) , 2764-2770
Bay-Substitution of Perylene Bisimides with Bidentate Nucleophiles: The Case of Aryloxide Anions
In this study, we delve into the regioselectivity of nucleophilic reactions involving brominated perylene bisimides (PBIs) and various bidentate aryloxide anions, previously associated with an SRN1 mechanism. We present herein a new perspective, suggesting that a single-electron-transfer aromatic nucleophilic substitution (SeT-SNAr) mechanism is a more plausible scenario. Our study reveals the favorable impact of photostimulation on reaction yields, making our method a convenient approach for accessing O-arylated PBIs.
- 25 January 2024
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 89 (4) , 2764-2770
Bay-Substitution of Perylene Bisimides with Bidentate Nucleophiles: The Case of Aryloxide Anions
In this study, we delve into the regioselectivity of nucleophilic reactions involving brominated perylene bisimides (PBIs) and various bidentate aryloxide anions, previously associated with an SRN1 mechanism. We present herein a new perspective, suggesting that a single-electron-transfer aromatic nucleophilic substitution (SeT-SNAr) mechanism is a more plausible scenario. Our study reveals the favorable impact of photostimulation on reaction yields, making our method a convenient approach for accessing O-arylated PBIs.
- Open Access
- 10 June 2022
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (25) , 21860-21867
1-Substituted Perylene Derivatives by Anionic Cyclodehydrogenation: Analysis of the Reaction Mechanism
Perylene derivatives constitute a promising class of compounds with technological applications mainly due to their optoelectronic properties. One mechanism proposed to synthesize them, starting from binaphthyl derivatives, is anionic cyclodehydrogenation (under reductive conditions). However, the scope of this reaction is limited. In the present study, we report a theoretical and experimental analysis of this particular reaction mechanism for its use in the synthesis of 1-substituted perylenes. Different substituents at position 2 of 1,1'-binaphthalene were evaluated: -OCH3, -OSi(CH3)(2)C(CH3)(3), and -N(CH3)(2). Based on density functional theory (DFT) calculations on the proposed mechanism, we suggest that the cyclization takes place from binaphthyl dianion instead of its radical anion. This dianion has an open-shell diradical nature, and this could be the species that was detected by EPR in previous studies. The O-substituted derivatives could not afford the perylene derivatives since their radical anions fragment and the necessary binaphthyl dianion could not be formed. On the other hand, 49% of N,N-dimethylperylen-1-amine was obtained starting from the N-substituted 2-binapthyl derivative as a substrate, employing a simpler experimental methodology.
- 10 June 2022
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (25) , 21860-21867
Open Access1-Substituted Perylene Derivatives by Anionic Cyclodehydrogenation: Analysis of the Reaction Mechanism
Perylene derivatives constitute a promising class of compounds with technological applications mainly due to their optoelectronic properties. One mechanism proposed to synthesize them, starting from binaphthyl derivatives, is anionic cyclodehydrogenation (under reductive conditions). However, the scope of this reaction is limited. In the present study, we report a theoretical and experimental analysis of this particular reaction mechanism for its use in the synthesis of 1-substituted perylenes. Different substituents at position 2 of 1,1'-binaphthalene were evaluated: -OCH3, -OSi(CH3)(2)C(CH3)(3), and -N(CH3)(2). Based on density functional theory (DFT) calculations on the proposed mechanism, we suggest that the cyclization takes place from binaphthyl dianion instead of its radical anion. This dianion has an open-shell diradical nature, and this could be the species that was detected by EPR in previous studies. The O-substituted derivatives could not afford the perylene derivatives since their radical anions fragment and the necessary binaphthyl dianion could not be formed. On the other hand, 49% of N,N-dimethylperylen-1-amine was obtained starting from the N-substituted 2-binapthyl derivative as a substrate, employing a simpler experimental methodology.
- 7 January 2021
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 125 (2) , 607-614
Infrared Multiple Photon Dissociation Spectroscopy of Protonated Cyameluric Acid
The present study reports the first structural characterization of protonated cyameluric acid ([CA + H]+) in the gas phase, which paves the way for prospective bottom-up research on the condensed-phase chemistry of CA in the protonated form. A number of [CA + H]+ keto-enol isomers can a priori be produced as a result of protonation at available N and O positions of precursor neutral CA tautomers, yet ab initio computations predict different reduced [CA + H]+ isomer populations dominating the solution and gas phases that are involved in the ion generation process (i.e., electrospray ionization). Infrared multiple photon dissociation spectra were recorded in the 990–1900 and 3300–3650 cm–1 regions and compared with theoretical [B3LYP/6-311++G(d,p)] IR absorption spectra of several [CA + H]+ isomers, providing a satisfactory agreement for the most stable monohydroxy form in the gas phase, [1358a]+, yet the contribution of its nearly isoenergetic OH rotamer, [1358b]+, cannot be neglected. This is indicative of the occurrence of [CA + H]+ isomer interconversion reactions, assisted by protic solvent molecules, during their transfer into the gas phase. The results suggest that available O positions on neutral CA are energetically favored protonation sites in the gas phase.
- 7 January 2021
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 125 (2) , 607-614
Infrared Multiple Photon Dissociation Spectroscopy of Protonated Cyameluric Acid
The present study reports the first structural characterization of protonated cyameluric acid ([CA + H]+) in the gas phase, which paves the way for prospective bottom-up research on the condensed-phase chemistry of CA in the protonated form. A number of [CA + H]+ keto-enol isomers can a priori be produced as a result of protonation at available N and O positions of precursor neutral CA tautomers, yet ab initio computations predict different reduced [CA + H]+ isomer populations dominating the solution and gas phases that are involved in the ion generation process (i.e., electrospray ionization). Infrared multiple photon dissociation spectra were recorded in the 990–1900 and 3300–3650 cm–1 regions and compared with theoretical [B3LYP/6-311++G(d,p)] IR absorption spectra of several [CA + H]+ isomers, providing a satisfactory agreement for the most stable monohydroxy form in the gas phase, [1358a]+, yet the contribution of its nearly isoenergetic OH rotamer, [1358b]+, cannot be neglected. This is indicative of the occurrence of [CA + H]+ isomer interconversion reactions, assisted by protic solvent molecules, during their transfer into the gas phase. The results suggest that available O positions on neutral CA are energetically favored protonation sites in the gas phase.
- Open Access
- 9 June 2020
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 10 (37) , 21974-21985
Arenium cation or radical cation? An insight into the cyclodehydrogenation reaction of 2-substituted binaphthyls mediated by Lewis acids
Perylene and its derivatives are some of the most interesting chromophores in the field of molecular design. One of the most employed methodologies for their synthesis is the cyclodehydrogenation of binaphthyls mediated by Lewis acids. In this article, we investigated the cyclodehydrogenation reaction of 2-substituted binaphthyls to afford the bay-substituted perylene. By using AlCl3 as a Lewis acid and high temperatures (the Scholl reaction), two new products bearing NH2 and N(CH3)2 groups at position 2 of the perylene ring were synthesized. Under these conditions, we were also able to obtain terrylene from ternaphthalene in 38% yield after two cyclodehydrogenation reactions in a single step. The attempts to promote the formation of a radical cation (necessary intermediary for the oxidative aromatic coupling mechanism) by using FeCl3 or a strong oxidant like 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) did not yield the expected products. DFT calculations suggested that the lack of reaction for oxidative aromatic coupling is caused by the difference between the oxidation potentials of the donor/acceptor couple. In the case of the Scholl reaction, the regiochemistry involved in the formation of the σ-complex together with the activation energy of the C–C coupling reaction helped to explain the differences in the reactivity of the different substrates studied.
- 9 June 2020
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 10 (37) , 21974-21985
Open AccessArenium cation or radical cation? An insight into the cyclodehydrogenation reaction of 2-substituted binaphthyls mediated by Lewis acids
Perylene and its derivatives are some of the most interesting chromophores in the field of molecular design. One of the most employed methodologies for their synthesis is the cyclodehydrogenation of binaphthyls mediated by Lewis acids. In this article, we investigated the cyclodehydrogenation reaction of 2-substituted binaphthyls to afford the bay-substituted perylene. By using AlCl3 as a Lewis acid and high temperatures (the Scholl reaction), two new products bearing NH2 and N(CH3)2 groups at position 2 of the perylene ring were synthesized. Under these conditions, we were also able to obtain terrylene from ternaphthalene in 38% yield after two cyclodehydrogenation reactions in a single step. The attempts to promote the formation of a radical cation (necessary intermediary for the oxidative aromatic coupling mechanism) by using FeCl3 or a strong oxidant like 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) did not yield the expected products. DFT calculations suggested that the lack of reaction for oxidative aromatic coupling is caused by the difference between the oxidation potentials of the donor/acceptor couple. In the case of the Scholl reaction, the regiochemistry involved in the formation of the σ-complex together with the activation energy of the C–C coupling reaction helped to explain the differences in the reactivity of the different substrates studied.
- 14 May 2019
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 21 (23) , 12231-12240
Adiabatic deprotonation as an important competing pathway to ESIPT in photoacidic 2-phenylphenols
ESIPT vs. ESPT: an adequate choice of the substitution pattern can take ESIPT to C-atom to another level.
- 14 May 2019
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 21 (23) , 12231-12240
Adiabatic deprotonation as an important competing pathway to ESIPT in photoacidic 2-phenylphenols
ESIPT vs. ESPT: an adequate choice of the substitution pattern can take ESIPT to C-atom to another level.
- Open Access
- 23 November 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (69) , 39222-39230
Photoinduced nucleophilic substitution of iodocubanes with arylthiolate and diphenylphosphanide ions. Experimental and computational approaches
A new synthetic route to modify the cubane nucleus is reported here. Methyl-4-iodocubane-1-carboxylate (1) and 1,4-diiodocubane (2) were employed as reagents to react with arylthiolate and diphenylphosphanide ions under irradiation in liquid ammonia and dimethylsulphoxide. The reactions proceed to afford thioaryl- and diphenylphosphoryl- cubane derivatives in moderate to good yields. It is also found that the monosubstituted product with retention of the second iodine is an intermediate compound. Mechanistic aspects are supported by DFT calculations.
- 23 November 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (69) , 39222-39230
Open AccessPhotoinduced nucleophilic substitution of iodocubanes with arylthiolate and diphenylphosphanide ions. Experimental and computational approaches
A new synthetic route to modify the cubane nucleus is reported here. Methyl-4-iodocubane-1-carboxylate (1) and 1,4-diiodocubane (2) were employed as reagents to react with arylthiolate and diphenylphosphanide ions under irradiation in liquid ammonia and dimethylsulphoxide. The reactions proceed to afford thioaryl- and diphenylphosphoryl- cubane derivatives in moderate to good yields. It is also found that the monosubstituted product with retention of the second iodine is an intermediate compound. Mechanistic aspects are supported by DFT calculations.
- 1 June 2018
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 83 (15) , 7867-7877
Photoinduced Synthesis of Dibenzofurans: Intramolecular and Intermolecular Comparative Methodologies
The SRN1 reaction has been used as a powerful tool for the synthesis of heterocycles, only few studies about photoinduced intramolecular cyclization to generate a new C-O bond by a radical pathway have been reported. This work introduces two strategies for the synthesis of substituted dibenzofurans by electron transfer (eT) reactions. The first one is a three-step process that comprises bromination of o-arylphenols, Suzuki-Miyaura cross-coupling and photoinduced cyclization in order to obtain the above-mentioned products. The second one is a metal-free procedure and does not require any photocatalyst. Different solvents were tested and the yields ranged from low to moderate. A comparison was established between both methodologies showing the second one is the most suitable for the synthesis of dibenzofurans.
- 1 June 2018
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 83 (15) , 7867-7877
Photoinduced Synthesis of Dibenzofurans: Intramolecular and Intermolecular Comparative Methodologies
The SRN1 reaction has been used as a powerful tool for the synthesis of heterocycles, only few studies about photoinduced intramolecular cyclization to generate a new C-O bond by a radical pathway have been reported. This work introduces two strategies for the synthesis of substituted dibenzofurans by electron transfer (eT) reactions. The first one is a three-step process that comprises bromination of o-arylphenols, Suzuki-Miyaura cross-coupling and photoinduced cyclization in order to obtain the above-mentioned products. The second one is a metal-free procedure and does not require any photocatalyst. Different solvents were tested and the yields ranged from low to moderate. A comparison was established between both methodologies showing the second one is the most suitable for the synthesis of dibenzofurans.