Hamid Gilvari
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hamid Gilvari has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Dingena Schott
Delft University of Technology
5 shared publications - Wiebren de Jong
Delft University of Technology
5 shared publications - Arjan Mol
Department of Materials Science and Engineering Delft University of Technology Delft The Netherlands
2 shared publications Coen H.H. van Battum
2 shared publicationsDingena L. Schott
2 shared publications- Luis Cutz
Process and Energy Department, University of Technology of Delft, Delft, The Netherlands
2 shared publications
Latest Publications
- Open Access
- 1 July 2022
- Published by Elsevier in Particuology
- Vol. 66, 29-37
Fragmentation of fuel pellets during transport via a belt conveyor: A design of experiment study
- 1 July 2022
- Published by Elsevier in Particuology
- Vol. 66, 29-37
Open AccessFragmentation of fuel pellets during transport via a belt conveyor: A design of experiment study
- Open Access
- 1 November 2021
- Published by Elsevier in Computational Particle Mechanics
- Vol. 8 (5) , 1047-1060
Breakage behavior of biomass pellets: an experimental and numerical study
- 1 November 2021
- Published by Elsevier in Computational Particle Mechanics
- Vol. 8 (5) , 1047-1060
Open AccessBreakage behavior of biomass pellets: an experimental and numerical study
- Open Access
- 1 August 2021
- Published by Elsevier in Particuology
- Vol. 57, 146-156
Large-scale transportation and storage of wood pellets: Investigation of the change in physical properties
- 1 August 2021
- Published by Elsevier in Particuology
- Vol. 57, 146-156
Open AccessLarge-scale transportation and storage of wood pellets: Investigation of the change in physical properties
- Open Access
- 4 January 2021
- Published by Springer Nature in Communications Materials
- Vol. 2 (1) , 1-12
Microstructural degradation during the storage of biomass pellets
The use of biomass pellets as a source of renewable energy has increased in recent times. However, pellet storage during transportation can compromise their properties, due to fluctuating temperature and humid environments. Here, we show that extended storage of one month at 40 °C and 85% relative humidity causes significant biomass pellet degradation. This was evidenced by higher pellet porosity, weight gain, increased inclusion body formation and creation of an internal network of cracks. We quantify the inclusion and pore growth processes at the surface and within the pellets, which has implications for subsequent thermochemical conversion. The global bioenergy transition may depend upon biomass pellets, and this study shows that storage conditions are critical in the supply chain, so to maintain their quality. Without the development of stronger policies to avoid premature degradation of biomass pellets, they may not realize their full potential as a bioenergy source.
- 4 January 2021
- Published by Springer Nature in Communications Materials
- Vol. 2 (1) , 1-12
Open AccessMicrostructural degradation during the storage of biomass pellets
The use of biomass pellets as a source of renewable energy has increased in recent times. However, pellet storage during transportation can compromise their properties, due to fluctuating temperature and humid environments. Here, we show that extended storage of one month at 40 °C and 85% relative humidity causes significant biomass pellet degradation. This was evidenced by higher pellet porosity, weight gain, increased inclusion body formation and creation of an internal network of cracks. We quantify the inclusion and pore growth processes at the surface and within the pellets, which has implications for subsequent thermochemical conversion. The global bioenergy transition may depend upon biomass pellets, and this study shows that storage conditions are critical in the supply chain, so to maintain their quality. Without the development of stronger policies to avoid premature degradation of biomass pellets, they may not realize their full potential as a bioenergy source.
- Open Access
The Effect of Biomass Pellet Length, Test Conditions and Torrefaction on Mechanical Durability Characteristics According to ISO Standard 17831-1
With the recent increase in biomass pellet consumption, the mechanical degradation of pellets during transport and handling has become more important. ISO standard 17831-1 is an accepted global standard that is commonly used amongst researchers and industries to determine the mechanical durability of pellets. However, the measured mechanical durability sometimes fails to match the certificate accompanying the shipment. In such cases, pellet length specifications are suspected to play a role. This paper studies the effect of pellet length on mechanical durability for various types of commercially produced biomass pellets. In addition, the effect of test conditions and torrefaction on the mechanical durability of biomass pellets has been investigated. To study the effect of pellet length, pellets were classified into three groups: shorter than 15 mm, 15 to 30 mm, and longer than 30 mm, and their length distributions were measured using an in-house image processing tool. Then, the mechanical durability of pellets was measured using ISO standard 17831-1. The mechanical durability results were compared to random-sized pellet samples. To study the effect of test conditions, the mechanical durability test was operated at different time intervals to elucidate the effect of tumbling at different conditions. The results show that the mechanical durability depends highly on the length distribution of the pellets, with a difference between categories of up to 13%. It was also observed that the mechanical durability remains relatively constant after a specific time interval. Based on the results, we highly recommend modifying the current ISO standard to account for the pellet length distribution (PLD).
Open AccessThe Effect of Biomass Pellet Length, Test Conditions and Torrefaction on Mechanical Durability Characteristics According to ISO Standard 17831-1
With the recent increase in biomass pellet consumption, the mechanical degradation of pellets during transport and handling has become more important. ISO standard 17831-1 is an accepted global standard that is commonly used amongst researchers and industries to determine the mechanical durability of pellets. However, the measured mechanical durability sometimes fails to match the certificate accompanying the shipment. In such cases, pellet length specifications are suspected to play a role. This paper studies the effect of pellet length on mechanical durability for various types of commercially produced biomass pellets. In addition, the effect of test conditions and torrefaction on the mechanical durability of biomass pellets has been investigated. To study the effect of pellet length, pellets were classified into three groups: shorter than 15 mm, 15 to 30 mm, and longer than 30 mm, and their length distributions were measured using an in-house image processing tool. Then, the mechanical durability of pellets was measured using ISO standard 17831-1. The mechanical durability results were compared to random-sized pellet samples. To study the effect of test conditions, the mechanical durability test was operated at different time intervals to elucidate the effect of tumbling at different conditions. The results show that the mechanical durability depends highly on the length distribution of the pellets, with a difference between categories of up to 13%. It was also observed that the mechanical durability remains relatively constant after a specific time interval. Based on the results, we highly recommend modifying the current ISO standard to account for the pellet length distribution (PLD).
- Open Access
The Effect of Environmental Conditions on the Degradation Behavior of Biomass Pellets
Biomass pellets provide a pivotal opportunity in promising energy transition scenarios as a renewable source of energy. A large share of the current utilization of pellets is facilitated by intensive global trade operations. Considering the long distance between the production site and the end-user locations, pellets may face fluctuating storage conditions, resulting in their physical and chemical degradation. We tested the effect of different storage conditions, from freezing temperatures (−19 °C) to high temperature (40 °C) and humidity conditions (85% relative humidity), on the physicochemical properties of untreated and torrefied biomass pellets. Moreover, the effect of sudden changes in the storage conditions on pellet properties was studied by moving the pellets from the freezing to the high temperature and relative humidity conditions and vice versa. The results show that, although storage at one controlled temperature and RH may degrade the pellets, a change in the temperature and relative humidity results in higher degradation in terms of higher moisture uptake and lower mechanical strength.
Open AccessThe Effect of Environmental Conditions on the Degradation Behavior of Biomass Pellets
Biomass pellets provide a pivotal opportunity in promising energy transition scenarios as a renewable source of energy. A large share of the current utilization of pellets is facilitated by intensive global trade operations. Considering the long distance between the production site and the end-user locations, pellets may face fluctuating storage conditions, resulting in their physical and chemical degradation. We tested the effect of different storage conditions, from freezing temperatures (−19 °C) to high temperature (40 °C) and humidity conditions (85% relative humidity), on the physicochemical properties of untreated and torrefied biomass pellets. Moreover, the effect of sudden changes in the storage conditions on pellet properties was studied by moving the pellets from the freezing to the high temperature and relative humidity conditions and vice versa. The results show that, although storage at one controlled temperature and RH may degrade the pellets, a change in the temperature and relative humidity results in higher degradation in terms of higher moisture uptake and lower mechanical strength.
- Open Access
- 1 January 2019
- Published by Elsevier in Biomass and Bioenergy
- Vol. 120, 117-134
Quality parameters relevant for densification of bio-materials: Measuring methods and affecting factors - A review
- 1 January 2019
- Published by Elsevier in Biomass and Bioenergy
- Vol. 120, 117-134
Open AccessQuality parameters relevant for densification of bio-materials: Measuring methods and affecting factors - A review