Shintaro Mizuno
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shintaro Mizuno has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Yasuhiko Takeda
Toyota Central R&D Labs., Inc., Nagakute, Aichi 480-1192, Japan
6 shared publications - Hom Nath Luitel
Toyota Central Research and Development Laboratories, Inc
3 shared publications - Kazuo Hasegawa
Toyota Central Research and Development Laboratories, Inc., Nagakute, Aichi 480-1192, Japan
2 shared publications - Masahito Shiozawa
Toyota Central R&D Laboratories., Inc., 41-1 Yokomichi, Nagakute, Aichi 480-1192, Japan
2 shared publications - Akihisa Ichiki
Department of Applied Mathematics Faculty of Science Fukuoka University 8-19-1, Nanakuma Jonan-ku 814-0180 Fukuoka City Japan
1 shared publication Hideaki Uno
Department of Mathematical and Design Engineering, Gifu University, Gifu 501-1193, Japan
1 shared publication
Latest Publications
- 11 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (18) , 13929-13937
Introduction of Ag Nanoparticles onto Cu Catalysts Enhances the Selectivity toward Multicarbon Liquid Products in Electrochemical CO Reduction
- 11 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (18) , 13929-13937
Introduction of Ag Nanoparticles onto Cu Catalysts Enhances the Selectivity toward Multicarbon Liquid Products in Electrochemical CO Reduction
- 29 July 2022
- Published by Springer Nature in Electrocatalysis
- Vol. 13 (6) , 830-837
Improved Durability of Highly Active IrOx Electrodes for Electrocatalytic Oxygen Evolution Reaction
- 29 July 2022
- Published by Springer Nature in Electrocatalysis
- Vol. 13 (6) , 830-837
Improved Durability of Highly Active IrOx Electrodes for Electrocatalytic Oxygen Evolution Reaction
- Open Access
- 11 February 2019
- Published by Wiley in International Journal of Photoenergy
- Vol. 2019, 1-11
Super Broadband-Sensitive Upconversion in Tm and Ni Codoped Perovskites
We investigated broadband-sensitive upconversion (UC) processes in a series of Tm- and Ni-sensitized ABO3 (A = Ca/Sr/Ba and B = Ti/Zr/Hf) perovskites. We have designed combinations of the sensitizers and host cations such that super broad solar radiation ranging from 900 nm to nearly 2000 nm can be efficiently upconverted to 800 nm and shorter wavelengths. The Ni2+ ions located at the center of O2− octahedra absorbed photons in the 900–1500 nm range and transferred those energies to the nearby Tm3+ ions. The Tm3+ ions upconverted those energies at 800 nm, along with the energies absorbed by themselves in the 1100–1250 and 1550–2000 nm ranges, exhibiting super broadband sensitivity. Among the ABO3:Tm, Ni (A = Ca/Sr/Ba and B = Ti/Zr/Hf) upconverters, CaTiO3:Tm, Ni exhibited the best performance due to its most distorted crystal structure, which intensified the emission and absorption extents by increasing the optical transition probabilities of Tm3+ and Ni2+ ions. Introduction of alkali ions at the Ca2+ sites and Nb5+ ions at the Ti4+ sites intensified the UC emission by many folds, mainly due to a charge balance mechanism. At the same time, bigger and smaller codoped alkali ions created an asymmetric crystal field around the active ions and further enhanced the UC emission. Importantly, the upconverted photons are within the absorption edges of GaAs, Cu2ZnSnS4, and dye-sensitized solar cells making wider applications of these upconverters besides crystalline Si solar cells.
- 11 February 2019
- Published by Wiley in International Journal of Photoenergy
- Vol. 2019, 1-11
Open AccessSuper Broadband-Sensitive Upconversion in Tm and Ni Codoped Perovskites
We investigated broadband-sensitive upconversion (UC) processes in a series of Tm- and Ni-sensitized ABO3 (A = Ca/Sr/Ba and B = Ti/Zr/Hf) perovskites. We have designed combinations of the sensitizers and host cations such that super broad solar radiation ranging from 900 nm to nearly 2000 nm can be efficiently upconverted to 800 nm and shorter wavelengths. The Ni2+ ions located at the center of O2− octahedra absorbed photons in the 900–1500 nm range and transferred those energies to the nearby Tm3+ ions. The Tm3+ ions upconverted those energies at 800 nm, along with the energies absorbed by themselves in the 1100–1250 and 1550–2000 nm ranges, exhibiting super broadband sensitivity. Among the ABO3:Tm, Ni (A = Ca/Sr/Ba and B = Ti/Zr/Hf) upconverters, CaTiO3:Tm, Ni exhibited the best performance due to its most distorted crystal structure, which intensified the emission and absorption extents by increasing the optical transition probabilities of Tm3+ and Ni2+ ions. Introduction of alkali ions at the Ca2+ sites and Nb5+ ions at the Ti4+ sites intensified the UC emission by many folds, mainly due to a charge balance mechanism. At the same time, bigger and smaller codoped alkali ions created an asymmetric crystal field around the active ions and further enhanced the UC emission. Importantly, the upconverted photons are within the absorption edges of GaAs, Cu2ZnSnS4, and dye-sensitized solar cells making wider applications of these upconverters besides crystalline Si solar cells.
- 2 November 2018
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 102 (6) , 3457-3467
A broadband‐sensitive upconverter: Garnet‐type Ca 3 Ga 2 Ge 3 O 12 codoped with Er 3+ , Y 3+ , Li + , Ni 2+ , and Nb 5+
We have developed a new broadband‐sensitive photon upconversion (UC) material that can be used for transparent ceramic plates mounted on the rear faces of crystalline silicon solar cells. We selected the host material of a cubic crystal structure codoped with Er 3+ and Ni 2+ so that the Ni 2+ dopants were fully activated to sensitize the Er 3+ emitters. In garnet‐type Ca 3 Ga 2 Ge 3 O 12 with additional codopants of Nb 5+ and Li + for charge compensation, all the Ni 2+ dopants occupied the six‐coordinated Ga 3+ sites, leading to highly efficient energy transfer from the Ni 2+ to the Er 3+ . Formation of four‐coordinated Ni 2+ that quenches the UC emission of the Er 3+ was prevented, because Ni 2+ cannot substitute the four‐coordinated Ge 4+ much smaller than Ni 2+ . Consequently, energy dissipation from the Er 3+ to the Ni 2+ was well reduced compared with the previously developed Gd 3 Ga 5 O 12 :Er,Ni,Nb in which the Ni 2+ dopants partially occupied the four‐coordinated Ga 3+ sites. Additional introduction of Y 3+ and Li + enhanced optical transitions and improved the UC performance, owing to more enhanced lattice distortion, along with eliminating different phases. The optimal composition (Ca 0.6 Er 0.1 Y 0.1 Li 0.2 ) 3 (Ga 0.98 Ni 0.01 Nb 0.01 ) 2 Ge 3 O 12 exhibited a broadband sensitivity ranging from 1.1 μm (the absorption edge of silicon) to 1.6 μm for the UC emission at 0.98 μm.
- 2 November 2018
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 102 (6) , 3457-3467
A broadband‐sensitive upconverter: Garnet‐type Ca 3 Ga 2 Ge 3 O 12 codoped with Er 3+ , Y 3+ , Li + , Ni 2+ , and Nb 5+
We have developed a new broadband‐sensitive photon upconversion (UC) material that can be used for transparent ceramic plates mounted on the rear faces of crystalline silicon solar cells. We selected the host material of a cubic crystal structure codoped with Er 3+ and Ni 2+ so that the Ni 2+ dopants were fully activated to sensitize the Er 3+ emitters. In garnet‐type Ca 3 Ga 2 Ge 3 O 12 with additional codopants of Nb 5+ and Li + for charge compensation, all the Ni 2+ dopants occupied the six‐coordinated Ga 3+ sites, leading to highly efficient energy transfer from the Ni 2+ to the Er 3+ . Formation of four‐coordinated Ni 2+ that quenches the UC emission of the Er 3+ was prevented, because Ni 2+ cannot substitute the four‐coordinated Ge 4+ much smaller than Ni 2+ . Consequently, energy dissipation from the Er 3+ to the Ni 2+ was well reduced compared with the previously developed Gd 3 Ga 5 O 12 :Er,Ni,Nb in which the Ni 2+ dopants partially occupied the four‐coordinated Ga 3+ sites. Additional introduction of Y 3+ and Li + enhanced optical transitions and improved the UC performance, owing to more enhanced lattice distortion, along with eliminating different phases. The optimal composition (Ca 0.6 Er 0.1 Y 0.1 Li 0.2 ) 3 (Ga 0.98 Ni 0.01 Nb 0.01 ) 2 Ge 3 O 12 exhibited a broadband sensitivity ranging from 1.1 μm (the absorption edge of silicon) to 1.6 μm for the UC emission at 0.98 μm.
- 13 July 2018
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 57 (8S3) , 08RF05
Crystalline silicon photovoltaic cells used for power transmission from solar-pumped lasers: I. Light trapping concepts
We have proposed a light trapping concept for crystalline silicon photovoltaic (PV) cells used for power transmission from solar-pumped lasers (SPLs) emitting at 1064 nm. The underlying mechanism is multiple reflection between a multilayered angle-selective filter on the front surface and a diffuse reflector on the rear surface of the cell. For the stationary use and optical fiber connection of the SPL-PV combination in which the incident angles of the laser light to the PV cells (ϕ) change within 5–10°, double-cavity bandpass filters realize the required angle selection function. When the SPLs illuminate moving electric vehicles equipped with the PV cells at larger ϕ values, shortpass filters are appropriate. These specially designed angle-selective filters provide significant light trapping performance and consequently absorbances higher than the Yablonovitch limit up to ϕ = 45°. The fact that the present light trapping configuration requires no microfabrication processes is also a great advantage over two- and three-dimensional photonic crystal structures.
- 13 July 2018
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 57 (8S3) , 08RF05
Crystalline silicon photovoltaic cells used for power transmission from solar-pumped lasers: I. Light trapping concepts
We have proposed a light trapping concept for crystalline silicon photovoltaic (PV) cells used for power transmission from solar-pumped lasers (SPLs) emitting at 1064 nm. The underlying mechanism is multiple reflection between a multilayered angle-selective filter on the front surface and a diffuse reflector on the rear surface of the cell. For the stationary use and optical fiber connection of the SPL-PV combination in which the incident angles of the laser light to the PV cells (ϕ) change within 5–10°, double-cavity bandpass filters realize the required angle selection function. When the SPLs illuminate moving electric vehicles equipped with the PV cells at larger ϕ values, shortpass filters are appropriate. These specially designed angle-selective filters provide significant light trapping performance and consequently absorbances higher than the Yablonovitch limit up to ϕ = 45°. The fact that the present light trapping configuration requires no microfabrication processes is also a great advantage over two- and three-dimensional photonic crystal structures.
- 13 June 2018
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 57 (8S3) , 08RF02
Broadband-sensitive upconversion emission of Er,Ni,Nb-codoped Gd 3 Ga 5 O 12 garnet
We synthesized Gd 3 Ga 5 O 12 garnet codoped with Er, Ni, and Nb to realize transparent ceramics of broadband-sensitive upconverters used for crystalline silicon solar cells. We investigated energy transfer between the Er 3+ and Ni 2+ dopants using time-resolved measurements of both Ni 2+ and Er 3+ emissions. Most of the Ni 2+ dopants occupied the six-coordinated Ga sites in the synthesized powder samples. Under 1.1–1.45 µm excitation, energies absorbed by the six-coordinated Ni 2+ sensitizers almost perfectly transferred to the Er 3+ emitters, leading to upconversion (UC) emission of the Er 3+ at 0.98 µm. Combined with the UC emission directly excited at 1.45–1.65 µm, a broad sensitivity range of 1.1–1.65 µm was realized. However, the internal quantum efficiency of the UC emission was lower than that of previously developed La(Ga 0.5 Sc 0.5 )O 3 :Er,Ni,Nb, most likely owing to energy dissipation to a small amount of the Ni 2+ dopants locating at the four-coordinated Ga sites. To improve the UC performance, the four-coordinated Ni 2+ should be eliminated.
- 13 June 2018
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 57 (8S3) , 08RF02
Broadband-sensitive upconversion emission of Er,Ni,Nb-codoped Gd 3 Ga 5 O 12 garnet
We synthesized Gd 3 Ga 5 O 12 garnet codoped with Er, Ni, and Nb to realize transparent ceramics of broadband-sensitive upconverters used for crystalline silicon solar cells. We investigated energy transfer between the Er 3+ and Ni 2+ dopants using time-resolved measurements of both Ni 2+ and Er 3+ emissions. Most of the Ni 2+ dopants occupied the six-coordinated Ga sites in the synthesized powder samples. Under 1.1–1.45 µm excitation, energies absorbed by the six-coordinated Ni 2+ sensitizers almost perfectly transferred to the Er 3+ emitters, leading to upconversion (UC) emission of the Er 3+ at 0.98 µm. Combined with the UC emission directly excited at 1.45–1.65 µm, a broad sensitivity range of 1.1–1.65 µm was realized. However, the internal quantum efficiency of the UC emission was lower than that of previously developed La(Ga 0.5 Sc 0.5 )O 3 :Er,Ni,Nb, most likely owing to energy dissipation to a small amount of the Ni 2+ dopants locating at the four-coordinated Ga sites. To improve the UC performance, the four-coordinated Ni 2+ should be eliminated.
- 19 November 2012
- Published by Wiley in physica status solidi (c)
- Vol. 9 (12) , 2300-2303
Energy transfer from Ce to Nd in Y3Al5O12 ceramics
Luminescence spectra of Nd3+ and Ce3+ excited in absorption bands of Ce3+ in Y3Al5O12 (YAG) ceramics codoped with 0.9 mol.% Nd3+ and 0.05 mol.% Ce3+ were measured in a temperature range between 10 and 300 K. Their luminescence spectra indicate an energy transfer process from Ce3+ to Nd3+through reabsorption of the Ce3+ luminescence due to Nd3+. The large quantum yields of the Nd3+ luminescence excited in the Ce3+ absorption bands give evidence of the energy transfer process.
- 19 November 2012
- Published by Wiley in physica status solidi (c)
- Vol. 9 (12) , 2300-2303
Energy transfer from Ce to Nd in Y3Al5O12 ceramics
Luminescence spectra of Nd3+ and Ce3+ excited in absorption bands of Ce3+ in Y3Al5O12 (YAG) ceramics codoped with 0.9 mol.% Nd3+ and 0.05 mol.% Ce3+ were measured in a temperature range between 10 and 300 K. Their luminescence spectra indicate an energy transfer process from Ce3+ to Nd3+through reabsorption of the Ce3+ luminescence due to Nd3+. The large quantum yields of the Nd3+ luminescence excited in the Ce3+ absorption bands give evidence of the energy transfer process.