Zhen Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhen Liu has a total of 131 co-authors. Here are the top co-authors by number of shared publications:
Zhenghua Tang
Guangzhou Key Laboratory for Surface Chemistry of Energy Materials, New Energy Research Institute, School of Environment and Energy, Guangzhou Higher Education Mega Centre, South China University of Technology, Guangzhou, China
13 shared publicationsKe Li
State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou, China
12 shared publications- Zhenbin Chen
State Key Laboratory of Advanced Progressing and Recycling of Nonferrous Metal Materials, College of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730030, China
12 shared publications Juan M. Ruso
Soft Matter and Molecular Biophysics Group, Department of Applied Physics University of Santiago de Compostela 15782 Santiago de Compostela Spain
8 shared publications- Juan Manuel Ruso
University of Santiago de Compostela
7 shared publications - Ramón Rial
Soft Matter and Molecular Biophysics Group, Department of Applied Physics, University of Santiago de Compostela, 15782 Santiago de Compostela, Spain
5 shared publications
Latest Publications
- Open Access
- 24 March 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (7) , 391
Correction: Somoza et al. Microfluidic Fabrication of Gadolinium-Doped Hydroxyapatite for Theragnostic Applications. Nanomaterials 2023, 13, 501
- 24 March 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (7) , 391
Open AccessCorrection: Somoza et al. Microfluidic Fabrication of Gadolinium-Doped Hydroxyapatite for Theragnostic Applications. Nanomaterials 2023, 13, 501
- 25 March 2023
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 34 (6) , 2029-2043
Engineering and slow‐release properties of lignin‐based double‐layer coated fertilizer
Chemical fertilizer has become a necessary condition for increasing the production and income of agricultural products in modern agriculture. However, excessive fertilization and fertilizer leakage could cause environmental pollution. To improve the utilization rate of agricultural fertilizers and reduce environmental pollution, the degradability of slow‐release fertilizers (SRFs) has become a research hotspot. In this work, a double‐layer coating material of slow‐release fertilizer was fabricated using low‐cost polyvinyl alcohol (PVA) and methylcellulose (MC) as the inner coating materials, and attapulgite was doped into super absorbent polymer poly acrylic acid (PAA) and polyacrylamide (PAM) grafted natural biodegradable lignin as the outer coating materials. We investigated the chemical structures, mechanical properties, hydrophilic properties, and water retention properties of the double‐layer coating material coated on the surface of urea particles, and optimized the synthesis parameters to obtain the best water absorption properties of the outer layer water absorbent. Simultaneously, urea release was evaluated in dissolution experiments. The results show that at the PVA concentration of 5 wt% and the MC addition amount of 2.0 g, the performance indicators of the inner coating liquid were better than other contents. At the same time, more urea molecules (>30 days) were released in the single‐layer and double‐coated fertilizers, and the cumulative release rates of urea molecules were 92.36% and 85.10%, respectively. Therefore, this work provides research ideas for the preparation of double‐coated slow‐release fertilizers, which can improve soil water retention and fertilizer utilization.
- 25 March 2023
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 34 (6) , 2029-2043
Engineering and slow‐release properties of lignin‐based double‐layer coated fertilizer
Chemical fertilizer has become a necessary condition for increasing the production and income of agricultural products in modern agriculture. However, excessive fertilization and fertilizer leakage could cause environmental pollution. To improve the utilization rate of agricultural fertilizers and reduce environmental pollution, the degradability of slow‐release fertilizers (SRFs) has become a research hotspot. In this work, a double‐layer coating material of slow‐release fertilizer was fabricated using low‐cost polyvinyl alcohol (PVA) and methylcellulose (MC) as the inner coating materials, and attapulgite was doped into super absorbent polymer poly acrylic acid (PAA) and polyacrylamide (PAM) grafted natural biodegradable lignin as the outer coating materials. We investigated the chemical structures, mechanical properties, hydrophilic properties, and water retention properties of the double‐layer coating material coated on the surface of urea particles, and optimized the synthesis parameters to obtain the best water absorption properties of the outer layer water absorbent. Simultaneously, urea release was evaluated in dissolution experiments. The results show that at the PVA concentration of 5 wt% and the MC addition amount of 2.0 g, the performance indicators of the inner coating liquid were better than other contents. At the same time, more urea molecules (>30 days) were released in the single‐layer and double‐coated fertilizers, and the cumulative release rates of urea molecules were 92.36% and 85.10%, respectively. Therefore, this work provides research ideas for the preparation of double‐coated slow‐release fertilizers, which can improve soil water retention and fertilizer utilization.
- Open Access
- 26 January 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13 (3) , 501
Microfluidic Fabrication of Gadolinium-Doped Hydroxyapatite for Theragnostic Applications
Among the several possible uses of nanoparticulated systems in biomedicine, their potential as theragnostic agents has received significant interest in recent times. In this work, we have taken advantage of the medical applications of Gadolinium as a contrast agent with the versatility and huge array of possibilities that microfluidics can help to create doped Hydroxyapatite nanoparticles with magnetic properties in an efficient and functional way. First, with the help of Computational Fluid Dynamics (CFD), we performed a complete and precise study of all the elements and phases of our device to guarantee that our microfluidic system worked in the laminar regime and was not affected by the presence of nanoparticles through the flow requisite that is essential to guarantee homogeneous diffusion between the elements or phases in play. Then the obtained biomaterials were physiochemically characterized by means of XRD, FE-SEM, EDX, confocal Raman microscopy, and FT-IR, confirming the successful incorporation of the lanthanide element Gadolinium in part of the Ca (II) binding sites. Finally, the magnetic characterization confirmed the paramagnetic behaviour of the nanoparticles, demonstrating that, with a simple and automatized system, it is possible to obtain advanced nanomaterials that can offer a promising and innovative solution in theragnostic applications.
- 26 January 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13 (3) , 501
Open AccessMicrofluidic Fabrication of Gadolinium-Doped Hydroxyapatite for Theragnostic Applications
Among the several possible uses of nanoparticulated systems in biomedicine, their potential as theragnostic agents has received significant interest in recent times. In this work, we have taken advantage of the medical applications of Gadolinium as a contrast agent with the versatility and huge array of possibilities that microfluidics can help to create doped Hydroxyapatite nanoparticles with magnetic properties in an efficient and functional way. First, with the help of Computational Fluid Dynamics (CFD), we performed a complete and precise study of all the elements and phases of our device to guarantee that our microfluidic system worked in the laminar regime and was not affected by the presence of nanoparticles through the flow requisite that is essential to guarantee homogeneous diffusion between the elements or phases in play. Then the obtained biomaterials were physiochemically characterized by means of XRD, FE-SEM, EDX, confocal Raman microscopy, and FT-IR, confirming the successful incorporation of the lanthanide element Gadolinium in part of the Ca (II) binding sites. Finally, the magnetic characterization confirmed the paramagnetic behaviour of the nanoparticles, demonstrating that, with a simple and automatized system, it is possible to obtain advanced nanomaterials that can offer a promising and innovative solution in theragnostic applications.
- Open Access
- 24 August 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (9) , 1378
Research on the Mechanism of Multi-Domain Coupling Centrifugal Electrostatic Blowing Flying Deposition
The centrifugal electrostatic blowing process proposed in this paper solves the difficult continuous and stable deposition problem in the traditional centrifugal electrostatic spinning process. By establishing a flight deposition model of the centrifugal electrostatic spraying process, CFD is used to simulate and analyze the electrohydrodynamic effect of centrifugal jets, and the driving mechanism is explored. Subsequently, MATLAB is used to obtain the optimal solution conditions, and finally, the establishment of a two-dimensional flight trajectory model is completed and experimentally verified. In addition, the deposition model of the jet is established to clarify the flight trajectory under the multi-field coupling, the stable draft area of the jet is found according to this, and the optimal drafting station is clarified. This research provides new ideas and references for the exploration of the deposition mechanism of the centrifugal electrostatic blowing and electrostatic spinning process.
- 24 August 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (9) , 1378
Open AccessResearch on the Mechanism of Multi-Domain Coupling Centrifugal Electrostatic Blowing Flying Deposition
The centrifugal electrostatic blowing process proposed in this paper solves the difficult continuous and stable deposition problem in the traditional centrifugal electrostatic spinning process. By establishing a flight deposition model of the centrifugal electrostatic spraying process, CFD is used to simulate and analyze the electrohydrodynamic effect of centrifugal jets, and the driving mechanism is explored. Subsequently, MATLAB is used to obtain the optimal solution conditions, and finally, the establishment of a two-dimensional flight trajectory model is completed and experimentally verified. In addition, the deposition model of the jet is established to clarify the flight trajectory under the multi-field coupling, the stable draft area of the jet is found according to this, and the optimal drafting station is clarified. This research provides new ideas and references for the exploration of the deposition mechanism of the centrifugal electrostatic blowing and electrostatic spinning process.
- Open Access
Unraveling the Compositional and Molecular Features Involved in Lysozyme-Benzothiazole Derivative Interactions
In this work we present a computational analysis together with experimental studies, focusing on the interaction between a benzothiazole (BTS) and lysozyme. Results obtained from isothermal titration calorimetry, UV-vis, and fluorescence were contrasted and complemented with molecular docking and machine learning techniques. The free energy values obtained both experimentally and theoretically showed excellent similarity. Calorimetry, UV-vis, and 3D/2D-lig-plot analysis revealed that the most relevant interactions between BTS and lysozyme are based on a predominance of aromatic, hydrophobic Van der Waals interactions, mainly aromatic edge-to-face (T-shaped) π-π stacking interactions between the benzene ring belonging to the 2-(methylthio)-benzothiazole moiety of BTS and the aromatic amino acid residue TRP108 of the lysozyme receptor. Next, conventional hydrogen bonding interactions contribute to the stability of the BTS-lysozyme coupling complex. In addition, mechanistic approaches performed using elastic network models revealed that the BTS ligand theoretically induces propagation of allosteric signals, suggesting non-physiological conformational flexing in large blocks of lysozyme affecting α-helices. Likewise, the BTS ligand interacts directly with allosteric residues, inducing perturbations in the conformational dynamics expressed as a moderate conformational softening in the α-helices H1, H2, and their corresponding β-loop in the lysozyme receptor, in contrast to the unbound state of lysozyme.
Open AccessUnraveling the Compositional and Molecular Features Involved in Lysozyme-Benzothiazole Derivative Interactions
In this work we present a computational analysis together with experimental studies, focusing on the interaction between a benzothiazole (BTS) and lysozyme. Results obtained from isothermal titration calorimetry, UV-vis, and fluorescence were contrasted and complemented with molecular docking and machine learning techniques. The free energy values obtained both experimentally and theoretically showed excellent similarity. Calorimetry, UV-vis, and 3D/2D-lig-plot analysis revealed that the most relevant interactions between BTS and lysozyme are based on a predominance of aromatic, hydrophobic Van der Waals interactions, mainly aromatic edge-to-face (T-shaped) π-π stacking interactions between the benzene ring belonging to the 2-(methylthio)-benzothiazole moiety of BTS and the aromatic amino acid residue TRP108 of the lysozyme receptor. Next, conventional hydrogen bonding interactions contribute to the stability of the BTS-lysozyme coupling complex. In addition, mechanistic approaches performed using elastic network models revealed that the BTS ligand theoretically induces propagation of allosteric signals, suggesting non-physiological conformational flexing in large blocks of lysozyme affecting α-helices. Likewise, the BTS ligand interacts directly with allosteric residues, inducing perturbations in the conformational dynamics expressed as a moderate conformational softening in the α-helices H1, H2, and their corresponding β-loop in the lysozyme receptor, in contrast to the unbound state of lysozyme.
- Open Access
Advanced Materials Based on Nanosized Hydroxyapatite
The development of new materials based on hydroxyapatite has undergone a great evolution in recent decades due to technological advances and development of computational techniques. The focus of this review is the various attempts to improve new hydroxyapatite-based materials. First, we comment on the most used processing routes, highlighting their advantages and disadvantages. We will now focus on other routes, less common due to their specificity and/or recent development. We also include a block dedicated to the impact of computational techniques in the development of these new systems, including: QSAR, DFT, Finite Elements of Machine Learning. In the following part we focus on the most innovative applications of these materials, ranging from medicine to new disciplines such as catalysis, environment, filtration, or energy. The review concludes with an outlook for possible new research directions.
Open AccessAdvanced Materials Based on Nanosized Hydroxyapatite
The development of new materials based on hydroxyapatite has undergone a great evolution in recent decades due to technological advances and development of computational techniques. The focus of this review is the various attempts to improve new hydroxyapatite-based materials. First, we comment on the most used processing routes, highlighting their advantages and disadvantages. We will now focus on other routes, less common due to their specificity and/or recent development. We also include a block dedicated to the impact of computational techniques in the development of these new systems, including: QSAR, DFT, Finite Elements of Machine Learning. In the following part we focus on the most innovative applications of these materials, ranging from medicine to new disciplines such as catalysis, environment, filtration, or energy. The review concludes with an outlook for possible new research directions.
- 6 July 2020
- Published by Springer Nature in Journal of Polymer Research
- Vol. 27 (8) , 1-11
Nanoengineering of transparent polypropylene containing sorbitol-based clarifier
- 6 July 2020
- Published by Springer Nature in Journal of Polymer Research
- Vol. 27 (8) , 1-11
Nanoengineering of transparent polypropylene containing sorbitol-based clarifier
- 6 July 2020
- Published by Springer Nature in Journal of Polymer Research
- Vol. 27 (8) , 1-13
Study on synthesis and adsorption properties of ReO4− ion imprinted polymer
- 6 July 2020
- Published by Springer Nature in Journal of Polymer Research
- Vol. 27 (8) , 1-13
Study on synthesis and adsorption properties of ReO4− ion imprinted polymer
- Open Access
- 3 July 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (7) , 1302
Soft Actuated Hybrid Hydrogel with Bioinspired Complexity to Control Mechanical Flexure Behavior for Tissue Engineering
Hydrogels exhibit excellent properties that enable them as nanostructured scaffolds for soft tissue engineering. However, single-component hydrogels have significant limitations due to the low versatility of the single component. To achieve this goal, we have designed and characterized different multi-component hydrogels composed of gelatin, alginate, hydroxyapatite, and a protein (BSA and fibrinogen). First, we describe the surface morphology of the samples and the main characteristics of the physiological interplay by using fourier transform infrared (FT-IR), and confocal Raman microscopy. Then, their degradation and swelling were studied and mechanical properties were determined by rheology measurements. Experimental data were carefully collected and quantitatively analyzed by developing specific approaches and different theoretical models to determining the most important parameters. Finally, we determine how the nanoscale of the system influences its macroscopic properties and characterize the extent to which degree each component maintains its own functionality, demonstrating that with the optimal components, in the right proportion, multifunctional hydrogels can be developed.
- 3 July 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (7) , 1302
Open AccessSoft Actuated Hybrid Hydrogel with Bioinspired Complexity to Control Mechanical Flexure Behavior for Tissue Engineering
Hydrogels exhibit excellent properties that enable them as nanostructured scaffolds for soft tissue engineering. However, single-component hydrogels have significant limitations due to the low versatility of the single component. To achieve this goal, we have designed and characterized different multi-component hydrogels composed of gelatin, alginate, hydroxyapatite, and a protein (BSA and fibrinogen). First, we describe the surface morphology of the samples and the main characteristics of the physiological interplay by using fourier transform infrared (FT-IR), and confocal Raman microscopy. Then, their degradation and swelling were studied and mechanical properties were determined by rheology measurements. Experimental data were carefully collected and quantitatively analyzed by developing specific approaches and different theoretical models to determining the most important parameters. Finally, we determine how the nanoscale of the system influences its macroscopic properties and characterize the extent to which degree each component maintains its own functionality, demonstrating that with the optimal components, in the right proportion, multifunctional hydrogels can be developed.