Ian Guymer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Ian Guymer has a total of 176 co-authors. Here are the top co-authors by number of shared publications:
- Virginia Stovin
The University of Sheffield
24 shared publications - Fred Sonnenwald
The University of Sheffield
18 shared publications - Joby Boxall
School of Mechanical, Aerospace and Civil Engineering, University of Sheffield, Sheffield S1 3JD, UK
13 shared publications - Fulvio Boano
Department of Environment, Land and Infrastructure Engineering (DIATI), Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129, Torino, Italy; CleanWaterCenter@PoliTo, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129, Torino, Italy
6 shared publications - Jesus D. Gomez-Velez
Environmental Sciences Division Oak Ridge National Laboratory Oak Ridge TN USA
6 shared publications - Stanley B. Grant
Occoquan Watershed Monitoring Laboratory, Department of Civil and Environmental Engineering, Virginia Tech, 9408 Prince William St, Manassas, 20110, VA, USA
6 shared publications
Latest Publications
- 1 January 2026
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydraulic Engineering
- Vol. 152 (1)
Disaggregation of a Tracer Cloud in Accelerating Transitional Pipe Flow
- 1 January 2026
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydraulic Engineering
- Vol. 152 (1)
Disaggregation of a Tracer Cloud in Accelerating Transitional Pipe Flow
- Open Access
- 9 September 2025
- Published by American Chemical Society (ACS) in ACS ES&T Water
- Vol. 5 (10) , 5785-5796
Channel Geometry Controls on Chemical Behavior in Rivers: Insights from a Comparative Field Study
Microbially mediated transformations, such as nitrification and biodegradation, play a crucial role in removing pollutants from rivers. Although in-stream removal rate coefficients are often assumed to be spatially and temporally constant, they are likely affected by the channel shape and size because these factors control contact between the water column and fixed biofilms. Here, we test the hypothesis that transformation rate constants are inversely proportional to the hydraulic radius (R: ratio of the channel cross-sectional area to wetted perimeter) in dye tracing experiments conducted in two U.K. rivers with contrasting morphologies: (1) the River Maun (shallow: mean bankfull R = 1.25 m) and (2) the River Calder (deep: mean bankfull R = 3 m). In each case, a slug of rhodamine WT was injected upstream of a wastewater outfall, and samples were collected downstream, staggered by the rhodamine travel time. Rate constants were derived for sucralose, ammonium, caffeine, and linear alkylbenzenesulfonate. Sucralose (persistent, hydrophilic, and exclusively of wastewater origin) was used as a conservative tracer to adjust model fits for dilution. Higher rate coefficients were observed for all biotransformed pollutants in the Maun compared to the Calder, supporting the hypothesis and highlighting the need to consider geomorphology in models of chemical behavior.
- 9 September 2025
- Published by American Chemical Society (ACS) in ACS ES&T Water
- Vol. 5 (10) , 5785-5796
Open AccessChannel Geometry Controls on Chemical Behavior in Rivers: Insights from a Comparative Field Study
Microbially mediated transformations, such as nitrification and biodegradation, play a crucial role in removing pollutants from rivers. Although in-stream removal rate coefficients are often assumed to be spatially and temporally constant, they are likely affected by the channel shape and size because these factors control contact between the water column and fixed biofilms. Here, we test the hypothesis that transformation rate constants are inversely proportional to the hydraulic radius (R: ratio of the channel cross-sectional area to wetted perimeter) in dye tracing experiments conducted in two U.K. rivers with contrasting morphologies: (1) the River Maun (shallow: mean bankfull R = 1.25 m) and (2) the River Calder (deep: mean bankfull R = 3 m). In each case, a slug of rhodamine WT was injected upstream of a wastewater outfall, and samples were collected downstream, staggered by the rhodamine travel time. Rate constants were derived for sucralose, ammonium, caffeine, and linear alkylbenzenesulfonate. Sucralose (persistent, hydrophilic, and exclusively of wastewater origin) was used as a conservative tracer to adjust model fits for dilution. Higher rate coefficients were observed for all biotransformed pollutants in the Maun compared to the Calder, supporting the hypothesis and highlighting the need to consider geomorphology in models of chemical behavior.
- 1 January 2025
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydraulic Engineering
- Vol. 151 (1)
Hydrodynamics and Length-Scale Distributions of a Random Cylinder Array
- 1 January 2025
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydraulic Engineering
- Vol. 151 (1)
Hydrodynamics and Length-Scale Distributions of a Random Cylinder Array
- 1 November 2024
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydraulic Engineering
- Vol. 150 (6)
Radial Mixing in Steady and Accelerating Pipe Flows
- 1 November 2024
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydraulic Engineering
- Vol. 150 (6)
Radial Mixing in Steady and Accelerating Pipe Flows
- 31 May 2024
- Published by Springer Nature
- p. 363-374
Reach Unified Channel Characteristics for the Transverse Advection-Dispersion Equation
- 31 May 2024
- Published by Springer Nature
- p. 363-374
Reach Unified Channel Characteristics for the Transverse Advection-Dispersion Equation
- 1 May 2023
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 149 (5)
Quantifying Mixing in Sewer Networks for Source Localization
- 1 May 2023
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 149 (5)
Quantifying Mixing in Sewer Networks for Source Localization
- Open Access
- 9 June 2022
- Published by Wiley in Hydrological Processes
- Vol. 36 (6)
Longitudinal dispersion affected by willow patches of low areal coverage
Vegetation notably influences transport and mixing processes and can thus be used for controlling the fate of substances in the hydro‐environment. Whilst most work covers fully vegetated conditions, the novelty of this paper is to focus on flows with real‐scale flexible willow patches. We aimed to investigate how longitudinal dispersion varies according to the spatial distribution, density and coverage of the patches and to evaluate the explanatory power of predictors that consider the hydraulics, vegetation and channel geometry. Salt tracer experiments were performed in a trapezoidal channel where we established 3–4 m long and 1–1.6 m wide patches of artificial foliated willows that reproduced the shapes and plant densities observed on woody‐vegetated floodplains. We examined sparsely distributed patches with low areal/volumetric coverage of 6–11%, and non‐vegetated conditions for reference. Flow depths and surface widths were 0.7–0.9 and 6–7 m, respectively, and the mean flow velocities ranged at 0.3–0.6 m/s. The emergent patches generated from a negligible to over a four‐fold increase in the longitudinal dispersion when compared with non‐vegetated conditions. The patches with a preferential location in low‐velocity areas, such as near banks, or with a high plant density and a blockage of the cross‐sectional flow area ⪆0.4, led to the largest dispersion and residence times. Patches under such configurations enhanced the normalized differential velocity defined as the difference between the highest (90th percentile) and lowest (10th percentile) cross‐sectional flow velocities divided by the mean velocity, thus increasing shear dispersion. As existing analytical predictors failed to estimate the effect of different patch configurations, we proposed the change in the normalized differential velocity between vegetated and corresponding non‐vegetated conditions as a basic predictor of the reach‐scale longitudinal dispersion coefficient under patchy vegetation. In contrast, we observed no clear relationship between flow resistance and dispersion. Thus, our findings indicated that bankside vegetation may allow for reduced peak concentrations and lengthened residence times, supporting pollutant management, while ensuring good flow conveyance. Such rare field‐scale analyses improve the estimation of solute transport in real vegetated flows.
- 9 June 2022
- Published by Wiley in Hydrological Processes
- Vol. 36 (6)
Open AccessLongitudinal dispersion affected by willow patches of low areal coverage
Vegetation notably influences transport and mixing processes and can thus be used for controlling the fate of substances in the hydro‐environment. Whilst most work covers fully vegetated conditions, the novelty of this paper is to focus on flows with real‐scale flexible willow patches. We aimed to investigate how longitudinal dispersion varies according to the spatial distribution, density and coverage of the patches and to evaluate the explanatory power of predictors that consider the hydraulics, vegetation and channel geometry. Salt tracer experiments were performed in a trapezoidal channel where we established 3–4 m long and 1–1.6 m wide patches of artificial foliated willows that reproduced the shapes and plant densities observed on woody‐vegetated floodplains. We examined sparsely distributed patches with low areal/volumetric coverage of 6–11%, and non‐vegetated conditions for reference. Flow depths and surface widths were 0.7–0.9 and 6–7 m, respectively, and the mean flow velocities ranged at 0.3–0.6 m/s. The emergent patches generated from a negligible to over a four‐fold increase in the longitudinal dispersion when compared with non‐vegetated conditions. The patches with a preferential location in low‐velocity areas, such as near banks, or with a high plant density and a blockage of the cross‐sectional flow area ⪆0.4, led to the largest dispersion and residence times. Patches under such configurations enhanced the normalized differential velocity defined as the difference between the highest (90th percentile) and lowest (10th percentile) cross‐sectional flow velocities divided by the mean velocity, thus increasing shear dispersion. As existing analytical predictors failed to estimate the effect of different patch configurations, we proposed the change in the normalized differential velocity between vegetated and corresponding non‐vegetated conditions as a basic predictor of the reach‐scale longitudinal dispersion coefficient under patchy vegetation. In contrast, we observed no clear relationship between flow resistance and dispersion. Thus, our findings indicated that bankside vegetation may allow for reduced peak concentrations and lengthened residence times, supporting pollutant management, while ensuring good flow conveyance. Such rare field‐scale analyses improve the estimation of solute transport in real vegetated flows.
- Open Access
- 5 April 2022
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 58 (4)
The Impact of Cylinder Diameter Distribution on Longitudinal and Transverse Dispersion Within Random Cylinder Arrays
Numerous studies focus on flow and mixing within cylinder arrays because of their similarity to vegetated flows. Randomly distributed cylinders are considered to be a closer representation of the natural distribution of vegetation stems compared with regularly distributed arrays. This study builds on previous work based on a single, fixed, cylinder diameter to consider non‐uniform cylinder diameter distributions. The flow fields associated with arrays of randomly distributed cylinders are modeled in two dimensions using the ANSYS Fluent Computational Fluid Dynamics software with Reynolds Stress Model turbulence closure. A transient scalar transport model is used to characterize longitudinal and transverse mixing (DxandDy) within each geometry. The modeling approach is validated against independent laboratory data, and the dispersion coefficients are shown to be comparable with previous experimental studies. Eight different cylinder diameter configurations (six uniform and two non‐uniform) are considered, each at 20 different solid volume fractions and with seven different transverse positions for the injection location. The new dispersion data cover a broad range of solid volume fractions, for which simultaneous estimates ofDxandDyhave not been available previously. There are no systematic differences in non‐dimensionalDxandDybetween uniform and non‐uniform cylinder diameter distributions. When non‐dimensionalized by cylinder diameter, both dispersion coefficients are independent of solid volume fraction. When non‐dimensionalized by cylinder spacing, both longitudinal and transverse dispersion can be described as linear functions of the ratio of cylinder diameter to cylinder spacing.
- 5 April 2022
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 58 (4)
Open AccessThe Impact of Cylinder Diameter Distribution on Longitudinal and Transverse Dispersion Within Random Cylinder Arrays
Numerous studies focus on flow and mixing within cylinder arrays because of their similarity to vegetated flows. Randomly distributed cylinders are considered to be a closer representation of the natural distribution of vegetation stems compared with regularly distributed arrays. This study builds on previous work based on a single, fixed, cylinder diameter to consider non‐uniform cylinder diameter distributions. The flow fields associated with arrays of randomly distributed cylinders are modeled in two dimensions using the ANSYS Fluent Computational Fluid Dynamics software with Reynolds Stress Model turbulence closure. A transient scalar transport model is used to characterize longitudinal and transverse mixing (DxandDy) within each geometry. The modeling approach is validated against independent laboratory data, and the dispersion coefficients are shown to be comparable with previous experimental studies. Eight different cylinder diameter configurations (six uniform and two non‐uniform) are considered, each at 20 different solid volume fractions and with seven different transverse positions for the injection location. The new dispersion data cover a broad range of solid volume fractions, for which simultaneous estimates ofDxandDyhave not been available previously. There are no systematic differences in non‐dimensionalDxandDybetween uniform and non‐uniform cylinder diameter distributions. When non‐dimensionalized by cylinder diameter, both dispersion coefficients are independent of solid volume fraction. When non‐dimensionalized by cylinder spacing, both longitudinal and transverse dispersion can be described as linear functions of the ratio of cylinder diameter to cylinder spacing.
- 1 December 2021
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydraulic Engineering
- Vol. 147 (12) , 04021046
Predicting Manhole Mixing Using a Compartmental Model
Manholes in combined sewers may become surcharged during storm events, resulting in complex mixing conditions. Although manhole hydrodynamics are reasonably well understood, predicting mixing across a surcharged manhole remains a challenge. An analytical compartmental mixing model for manholes, based on jet theory, has been further developed and applied to generate cumulative residence time distributions (CRTDs), which describe mixing. The modeled CRTDs were compared with the experimentally derived CRTDs of over 850 manhole configurations to evaluate how well the new compartmental model represents physical processes. The model underpredicts short-circuiting in manholes with manhole diameter to pipe diameter ratios greater than 4.4 and consequently overestimates mixing. Otherwise, the modeled CRTDs show good agreement with the experimental CRTDs. The new compartmental model represents key manhole hydrodynamics that are not represented in current software modeling packages, which assume manholes are instantaneously well-mixed. The compartmental model provides good predictions of the experimental downstream concentration profiles, although with reduced peak concentrations in those manhole configurations where short-circuiting is not well-predicted. Despite this, the compartmental model still predicts concentrations downstream of a manhole in closer agreement with the recorded data than the complete instantaneously well-mixed assumption. As an analytical model requiring no inputs other than manhole geometry, the new compartmental model applies to a wide range of manhole configurations, is robust, and is useful for predicting manhole mixing in practical applications.
- 1 December 2021
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydraulic Engineering
- Vol. 147 (12) , 04021046
Predicting Manhole Mixing Using a Compartmental Model
Manholes in combined sewers may become surcharged during storm events, resulting in complex mixing conditions. Although manhole hydrodynamics are reasonably well understood, predicting mixing across a surcharged manhole remains a challenge. An analytical compartmental mixing model for manholes, based on jet theory, has been further developed and applied to generate cumulative residence time distributions (CRTDs), which describe mixing. The modeled CRTDs were compared with the experimentally derived CRTDs of over 850 manhole configurations to evaluate how well the new compartmental model represents physical processes. The model underpredicts short-circuiting in manholes with manhole diameter to pipe diameter ratios greater than 4.4 and consequently overestimates mixing. Otherwise, the modeled CRTDs show good agreement with the experimental CRTDs. The new compartmental model represents key manhole hydrodynamics that are not represented in current software modeling packages, which assume manholes are instantaneously well-mixed. The compartmental model provides good predictions of the experimental downstream concentration profiles, although with reduced peak concentrations in those manhole configurations where short-circuiting is not well-predicted. Despite this, the compartmental model still predicts concentrations downstream of a manhole in closer agreement with the recorded data than the complete instantaneously well-mixed assumption. As an analytical model requiring no inputs other than manhole geometry, the new compartmental model applies to a wide range of manhole configurations, is robust, and is useful for predicting manhole mixing in practical applications.
- 1 September 2021
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydraulic Engineering
- Vol. 147 (9) , 04021033
Longitudinal Dispersion in Unsteady Pipe Flows
Temporal concentration profiles resulting from an injected pulse of fluorescent tracer were recorded at multiple locations along a pipe during controlled unsteady flow conditions. A linear temporal change in discharge over durations of 5, 10, or 60 s for both accelerating and decelerating flow conditions was studied. Tests were performed for flows that changed within the turbulent range, between Reynolds numbers of 6,500 and 47,000, and for laminar to turbulent flows, between Reynolds numbers of 2,700 and 47,000. Analysis of the data shows the limitations of employing steady-state routing of temporal concentration profiles in unsteady flow. Employing a flow weighted time routing approach, using tracer mean velocity and dispersion coefficients, provides accurate predictions of mixing in unsteady flow. For decelerating flows, longitudinal dispersion coefficients were lower than for the equivalent mean steady discharge. Previously unreported disaggregation of the tracer cloud was observed during all experiments accelerating from laminar to turbulent conditions.
- 1 September 2021
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydraulic Engineering
- Vol. 147 (9) , 04021033
Longitudinal Dispersion in Unsteady Pipe Flows
Temporal concentration profiles resulting from an injected pulse of fluorescent tracer were recorded at multiple locations along a pipe during controlled unsteady flow conditions. A linear temporal change in discharge over durations of 5, 10, or 60 s for both accelerating and decelerating flow conditions was studied. Tests were performed for flows that changed within the turbulent range, between Reynolds numbers of 6,500 and 47,000, and for laminar to turbulent flows, between Reynolds numbers of 2,700 and 47,000. Analysis of the data shows the limitations of employing steady-state routing of temporal concentration profiles in unsteady flow. Employing a flow weighted time routing approach, using tracer mean velocity and dispersion coefficients, provides accurate predictions of mixing in unsteady flow. For decelerating flows, longitudinal dispersion coefficients were lower than for the equivalent mean steady discharge. Previously unreported disaggregation of the tracer cloud was observed during all experiments accelerating from laminar to turbulent conditions.