Michael E. Cuneo

The ZX Initiative is a lean effort to upgrade the capabilities of Sandia’s Z Machine pulsed power facility to ensure the nation’s continued technical superiority in the key strategic areas of Radiation and High Energy Density Physics, Dynamic Material Properties, and Fusion. The initiative aims to deliver a doubling of stored energy and delivered power to relevant loads. While the effort does not supplant the need for a Next Generation High Energy Density Facility, it provides a technical bridg

With the achievement of thermonuclear ignition, there is interest to increase the performance of inertial-confinement-fusion (ICF) systems to reach high fusion yields and high-energy gain for energy-production purposes. One approach to achieve this is magnetic-direct-drive (MDD) ICF, where magnetic fields are used to compress ICF targets to thermonuclear conditions. To study the scaling of MDD ICF to high yields, we performed experiments on the 20-MA, 100-ns Z machine to study the invariant behavior of the magneto-Rayleigh-Taylor instability when changing the magnetic-field drive. Similarity-scaled aluminum cylindrical shells with preseeded axial perturbations were imploded at two different maximum currents: 14.7 and 19.2 MA. Consistent with dynamical similarity within experimental uncertainties, the magneto-Rayleigh-Taylor growth history measured via x-ray radiography exhibits agreement at the 16% level or better for late-time growth factors of 10x to 50x. However, the early instability development is not dynamically similar due to Ohmic-heating effects, which are not conserved by the proposed scaling prescriptions. This Letter exemplifies the application of similarity scaling to rigorously investigate the scaling of MDD ICF to high yields.

Fusion energy meets the twenty-first century World Grand Challenge of sustainable, ubiquitous, and safer energy sources. However, harnessing the promise of fusion energy has proven elusive. The competing approaches to fusion power plant design include inertial confinement fusion, National Ignition Facility (ICF-NIF, Z machine, etc.,) magnetic confinement fusion (MCF-Tokamak, stellarators, etc.), and other approaches that show promise in small- (flow stabilized Z pinches) or large-scale applications. These approaches are being accelerated with private and public funding and seek to demonstrate the feasibility of different approaches to fusion-based power plants. Yet, how can the necessary pulsed power technologies for these disruptive technology bases be accelerated with no clear “Dominant Design?” Roadmapping holds the promise to identify and develop common critical pulsed power components for laboratory, prototype, and commercial fusion, and can accelerate the commercialization of fusion reactor designs. A preroadmapping Workshop on Pulsed Power for Fusion was held at the IEEE International Pulsed Power Conference in San Antonio, TX, USA, in June 2023. The workshop had 177 attendees. Here, the common elements for many of the ICF technologies vying for dominant design were identified. The advancement of these technologies through roadmapping will enhance commercial expectations that require their rapid and innovative development in the next five years, as well as the next five to ten years. The key technologies identified that underpin and limit the advancement of fusion power include pulsed power technologies such as energy storage, high-voltage switching, additive manufacturing, and modular pulsed power circuit topologies. They are the focus of our effort in the following roadmap scenario, which will delineate potential paths to technology development.

Magnetized liner inertial fusion (MagLIF) experiments have demonstrated fusion-relevant ion temperatures up to 3.1 keV and thermonuclear production of up to 1.1 × 1013 deuterium–deuterium neutrons. This performance was enabled through platform development that provided increases in applied magnetic field, coupled preheat energy, and drive current. Advanced coil designs with internal reinforcement enabled an increase from 10 to 20 T. An improved laser pulse shape, beam smoothing, and thinner laser entrance foils increased preheat energy coupling from less than 1 to 2.3 kJ. A redesign of the final transmission line and load region increased peak load current from 16 to 20 MA. The wider range of input parameters was leveraged to study target performance trends with preheat energy, applied magnetic field, and peak load current. Ion temperature and neutron yield generally followed trends in two-dimensional clean Lasnex calculations. Stagnation performance improved with peak load current when other input parameters were also increased such that convergence was maintained. This dataset suggests that reducing convergence to less than 30 would improve predictability of target performance. Lasnex was used to identify a simulation-optimized scaling path, which suggests 10+ kJ of fusion yield is possible on the Z facility with achievable input parameters. This path also indicates >10 MJ could be generated through volume burn on a future facility with a path to high yield (>200 MJ) using cryogenic dense fuel layers. The newly developed MagLIF platform enables exploration of both this simulation optimized scaling path and a recently developed similarity-scaling path.

Elucidating the mechanisms responsible for sub-microsecond desorption of water and other impurities from electrode surfaces at high heating rates is crucial for understanding pulsed-power behavior and optimizing its efficiency. Ionization of desorbed impurities in the vacuum regions may create parallel loads and current loss. Devising methods to limit desorption during the short time duration of pulsed-power will significantly improve the power output. This problem also presents an exciting challenge to and paradigm for molecular length-scale modeling and theories. Previous molecular modeling studies have strongly suggested that, under high vacuum conditions, the amount of water impurity adsorbed on oxide surfaces on metal electrodes is at a sub-monolayer level, which appears insufficient to explain the observed pulsed-power losses at high current densities. Based on density functional theory (DFT) calculations, we propose that hydrogen trapped inside iron metal can diffuse into iron (III) oxide on the metal surface in sub-microsecond time scales, explaining the extra desorbed inventory. These hydrogen atoms react with the oxide to form Fe(II) and desorbed H₂O at elevated temperatures. Cr₂O₃ is found to react more slowly to form Cr(II). H₂ evolution is also predicted to require higher activation energies, so H₂ may be evolved at later times than H₂O. A one-dimensional diffusion model, based on DFT results, is devised to estimate the water outgassing rate under different conditions. This model explains outgassing above 1 ML for surface temperatures of 1 eV often assumed in pulsed-power systems. Finally, we apply a suite of characterization techniques to demonstrate that when iron metal is heated to 650 ^∘C, the dominant surface oxide component becomes α-Fe₂O₃. We propose such specially-prepared samples will lead to convergence between atomic modeling and measurements like temperature-programmed desorption.