ESErwan Adi Saputro

Erwan Adi Saputro

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Erwan Adi Saputro has a total of 58 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Review of current practices and catalysts for biodiesel production from on‐grade and off‐grade crude palm oil

    by Erwan Adi Saputro, Adinda Tiara Khansa, Sabrina Nayla Junaidi, Ardika Nurmawati, Wiliandi Saputro, Muhammad Al Muttaqii

    Biodiesel is a renewable fuel made from vegetable oils, such as on‐grade and off‐grade crude palm oil (CPO). The quality of the starting oil, especially its free fatty acid (FFA) content, affects how catalysts are chosen and how well biodiesel is produced. This review looks at how different catalysts perform in making biodiesel from both on‐grade and off‐grade CPO. It covers catalyst types, reaction setups, how much biodiesel is produced, how stable the catalysts are, and the overall quality of the fuel. For this review, research articles published between 2010 and 2026 were gathered from Scopus, ScienceDirect, SpringerLink, and Google. A total of 96 studies were included. The findings show that acid catalysts are generally better for converting oils with high FFA through esterification, while alkaline and heterogeneous catalysts work well for transesterification after the oil has been properly treated. Heterogeneous catalysts are easier to separate and reuse, but issues like leaching, becoming less effective over time, and slow reactions can be problematic. Comparing catalyst performance directly is tricky, since studies use different oils and conditions. This review offers a side‐by‐side look at catalyst choices and highlights the main challenges and future opportunities for making CPO‐based biodiesel more sustainable and suitable for industry.

  • Open Access

    OPTIMASI LAMA WAKTU PEMANGGANGAN BAKPAO KARAKTER BERDASARKAN PADA PENILAIAN ORGANOLEPTIK

    by Erwan Adi Saputro, Nove Kartika Erliyanti, Rachmad Ramadhan Yogaswara, Andre Yusuf Trisna

    Bakpao adalah makanan yang berasal dari negara China. Bakpao dibuat dari tepung terigu yang ditambahkan ragi sebagai bahan pengembang, kemudian diberi aneka isian dan dikukus. Inovasi terhadap produk bakpao kini dilakukan, salah satunya melalui metode pemanggangan bersuhu rendah guna menciptakan tampilan dan tekstur yang berbeda, seperti pada bakpao karakter. Tujuan penelitian ini adalah untuk mengetahui pengaruh lama pemanasan pada suhu rendah terhadap karakteristik organoleptik warna, rasa, aroma, dan tekstur pada kue bakpao, serta terhadap proses pengembangan dan porositasnya. Penelitian ini dilakukan dengan tahapan pembuatan adonan bakpao, proses pemanggangan dengan variasi waktu (10, 15, dan 20 menit), analisis organoleptik, dan analisis data menggunakan uji statistik. Hasil penelitian menunjukkan bahwa lama pemanggangan memberikan pengaruh yang signifikan (p<0,05) terhadap karakteristik organoleptik warna, rasa, aroma, dan tekstur. Perlakuan pemanggangan selama 15–20 menit memberikan hasil yang paling disukai panelis, khususnya dari segi warna dan tekstur.

  • Circular Fashion Business Model Development Using Digital Innovation in Tanggulangin Leather Bag SME

    by Rahaju Saraswati, Firra Rosariawari, Erwan Adi Saputro, Susilowati Susilowati

    This chapter explores how digital innovation, such Business Intelligence (BI) and Artificial Intelligence (AI), can accelerate the transition of traditional fashion SMEs toward circular and sustainable business models. Using the Tanggulangin leather bag industry in East Java, Indonesia, as a case study, it demonstrates how data-driven insights derived from e-commerce analytics can inform market understanding, strategic design, and resource optimization. The BI dashboard reveals market dynamics by visualizing product distribution, pricing, and consumer behaviour, while AI techniques complement this by uncovering hidden patterns and predicting emerging trends. The insight from this strategy form the basis for developing the Circular Fashion Business Model (CFBM), which positions data as a strategic asset linking sustainability and competitiveness by embedding it through digital innovation. The chapter concludes that circular transformation requires both technological innovation and socio-economic collaboration among key stakeholders.

  • Inovasi : Pemanfaatan Tanaman Alur Sebagai Tepung Bernutrisi Untuk Ketahanan Gizi di Desa Segoro Tambak

    by Ayu Rosyida Zam Zam, Nafisah Farafi, Beta Cahaya Pertiwi, Erwan Adi Saputro

    Kegiatan pengabdian kepada masyarakat ini dilakukan di Desa Segoro Tambak, Kecamatan Sedati, Kabupaten Sidoarjo, dengan tujuan untuk mengenalkan pemanfaatan tanaman alur (Suaeda maritima) sebagai bahan baku tepung bernutrisi. Tanaman alur merupakan tanaman halofit yang tumbuh melimpah di pesisir namun belum dimanfaatkan secara optimal oleh masyarakat. Kegiatan ini meliputi kegiatan sosialisasi, pelatihan pembuatan tepung daun alur, serta demonstrasi olahan mie sehat berbasis tepung alur. Proses pembuatan melibatkan pemisahan daun, pencucian, blanching, penjemuran, penggilingan, dan pengemasan. Hasil kuisioner awal menunjukkan 100% peserta belum mengetahui potensi tanaman alur sebagai bahan pangan. Setelah sosialisasi, 83% peserta menyatakan tertarik untuk memanfaatkannya. Hasil ini menunjukkan adanya peningkatan pemahaman, keterampilan, dan antusiasme masyarakat dalam mengolah sumber daya lokal menjadi produk bernilai gizi dan ekonomi. Produk tepung alur memiliki keunggulan sebagai tepung bebas gluten, bernutrisi, dan berpotensi dikembangkan dalam skala rumah tangga. Kegiatan ini diharapkan dapat mendorong kemandirian pangan lokal serta pembentukan usaha mikro berbasis pemanfaatan tanaman pesisir.

  • Greenhouse gas ( GHG ) emissions estimation of hazardous waste in oil and gas industry for 2020–2024

    by Luh Asri Ningsih Widhi Nurjaya, Silvana Dwi Nurherdiana, Erwan Adi Saputro, Mohd Jumain Jalil

    The oil and gas industry produces diverse hazardous and toxic wastes (HTW) classified into dominant wastes, including chemicals residues, while non‐dominant wastes, such as contaminated materials, which pose greenhouse gas (GHG) emissions risks. Therefore, this study provides a detailed estimation of its total GHG emissions on the period from 2020 to 2024 and its transportation in the oil and gas industry. The Tier 1 approach of the 2006 Intergovernmental Panel on Climate Change (IPCC) Guidelines was applied for estimating, covering three major GHG: carbon dioxide (CO 2 ), methane (CH 4 ), and nitrous oxide (N 2 O). Results indicate a substantial 83.99% reduction in total emissions from hazardous waste from 705,093 tCO 2 eq in 2020 to 112,888 tCO 2 eq in 2024 reflecting improved waste handling practices. Emissions from dominant waste types declined by 42.46%, while non‐dominant waste types showed a 99.67% reduction. Its transportation‐related emissions of marine transport were 14,292 tCO 2 eq, while land transport of 0.001742069 tCO 2 eq from CH 4 and N 2 O conversion value which due to avoid double counting, CO 2 emissions were treated as part of the energy sector. The study contributes to policy formulation by highlighting the importance of incorporating both treatment and transportation emissions in waste management strategies to achieve low‐carbon and sustainable development goals.


  • Synthesis of Biochar From Agricultural Waste With Alkaline Hydrothermal Method for Soil Remediation

    by Ela Sufiana, Dessy Ariyanti, Dina Lesdantina, Erwan Adi Saputro

    The utilization of biomass as a value‐added material has gained widespread attention due to the abundance of agricultural waste that remains underutilized. This waste is readily available at an affordable or no cost, yet when left unaddressed, it can contribute to environmental issues, such as the release of methane gas, which pollutes the air and poses risks to human health. The direct burning of agricultural waste further intensifies these problems. Along with a large amount of agricultural waste, critical land problems also arise due to the excessive use of inorganic fertilizers. This study addresses the issues by synthesizing biochar from agricultural waste (rice husks, sawdust, and bagasse) using the hydrothermal method at 180°C with NaOH as a solvent to enhance functional groups and increase adsorption capacity to be applied as a soil remediation agent. Biochar characterization was performed using Fourier Transform Infrared Spectroscopy (FTIR), Brunauer–Emmett–Teller (BET), Barrett–Joyner–Halenda (BJH) methods, and carbon, hydrogen, nitrogen, sulfur (CHNS), and total plate count (TPC) analysis. The result shows, based on the functional group of the biochar of rice husks treated at different NaOH concentrations, the best results were obtained with a 5 M concentration, that applied for the synthesis condition for sawdust and bagasse‐based biochar. A large number of functional groups were exhibited by rice husk‐based biochar, yet they have the smallest surface area. The large number of functional groups, however, supports the ability of biochar in soil remediation. Proven by rice husk‐derived biochar demonstrated excellent performance, promoting leaf growth by 25%, root growth by 31%, and overall plant growth by 41%. Moreover, microorganisms observed in the soil after plantation increased tenfold with the addition of biochar compared to soil without biochar, highlighting the excellent potential of biochar in soil remediation.

  • Open Access

    Development of Silica-based Materials from Natural Sources as A Green Catalyst for Biofuel Production

    by Reva Edra Nugraha, Abdul Aziz, A.R Yelvia Sunarti, Silvana Dwi Nurherdiana, Zuhriah Mumtazah, Novia Amalia Sholeha, Ardika Nurmawati, Syuaibatul Islamiyah, Atika Nandini, Erwan Adi Saputro

    Mesoporous silica is a versatile material characterized by its highly ordered nanoporous structure with pore diameters ranging from 2 to 50 nanometers. This unique structure provides a large surface area and volume, making mesoporous silica an excellent candidate for various applications in adsorption, drug delivery, catalysis, and environmental remediation. Mesoporous silica can be synthesized using commercial or natural silica precursors such as mineral clay and other natural sources. Promising alternative sources of silica for synthesizing mesoporous materials encompass a range of materials, including various clay minerals such as kaolin, rectorite, halloysite, montmorillonite, sepiolite, hectorite, bentonite, talc, muscovite, paragonite, palygorskite, and chlorite. Other natural sources like beach sand, geothermal sludge, and sepiolite also show significant potential for mesoporous material synthesis. However, these sources have not been extensively explored and warrant further investigation in the field. The mesoporous silica from natural sources has been widely used as a catalyst for biofuel production via hydrocracking, catalytic cracking, and deoxygenation reactions

  • Interdisciplinary Collaboration in AI and Metaverse

    by Erwan Adi Saputro, Lasmedi Afuan, Mohd Halim Mohd Noor, Ardya Pramesti Regita Cahyani, Foni Putri Sandi, Shofwatul Athiyah, Akren Alvindo Pratama

    Interdisciplinary collaboration between AI and the Metaverse opens up numerous prospects in sectors such as engineering, medicine, and architecture. AI improves the Metaverse through simulation, real-time decision-making, and invention. In engineering, it helps with automation, predictive maintenance, and design optimisation. In medical, AI aids in early detection, precision therapy, and genetic research. Biases and privacy concerns can be addressed through cross-disciplinary collaboration. Future directions emphasise explainable AI, adaptive systems, and global issues such as sustainability and healthcare.


  • Open Access

    Characteristics of all organic redox flow battery (AORFB) active species TEMPO-methyl viologen at different electrolyte solution

    by Dessy Ariyanti, Aprilina Purbasari, Farida Diyah Hapsari, Erwan Adi Saputra, Fazlena Hamzah

    The practice of using wind and solar energy to generate electricity represents a solution that would be beneficial for the environment and ought to be explored. However, in order to ensure users' stability and continuous access to electricity, the increasing usage of renewable energy needs to align with the advancement of energy storage technologies. Redox flow batteries, which use an organic solution as the electrolyte and a proton exchange membrane as an ion exchange layer, are currently the subject of extensive research as one of the alternative renewable energy storage systems with the benefit of a techno economy. This study investigated the solubility of organic solution, namely 2,2,6,6-Tetramethylpiperidinyloxy or 2,2,6,6-Tetramethylpiperidine 1-oxyl (TEMPO) and methyl viologen (MV) in various essential electrolyte solutions such as NaCl, KCl, KOH, and H2SO4 that can be used as electrolytes of all organic redox flow battery (AORFB) system to produce high energy density and charging and discharging capacity. The result shows the optimum condition for effective charge transfer in AORFB is TEMPO catholyte and MV anolytes in the 0.08 M H2SO4electrolyte solution. Additionally, a correlation between the acquisition of electrolyte solutions on TEMPO catalyst and MV anolytes was discovered by the data. Electrolyte solution can improve electrical conductivity in TEMPO solution, which in turn can improve the efficiency of AORFB charging and discharging. Contrarily, MV anolytes exhibit a different pattern where the addition of electrolyte solutions reduces their electrical conductivity. RFBs systems with the aforementioned catholyte and anolyte can be used to store solar energy with a maximum current of 0.6 A for 35 minutes. Storage effectiveness is characterized by a change in colour in the catholyte and anolyte. The findings firming the possibility of using AORFB as one of the alternative energy storage systems that can accommodate the intermittence of the renewable energy input resource.


  • Open Access

    Penggunaan Video Animasi Pembelajaran bagi Guru Sekolah Dasar

    by Mu’tAsim Billah, Titi Susilowati, Fransisca Asteria Nandra Febiola, Rina Yulianti, Rachmad Ramadhan Yogaswara, Nove Kartika Erliyanti, Erwan Adi Saputro

    The Covid-19 (Coronavirus Disease 2019) pandemic has had some effect on the development of children's education because they have to learn independently online. Online learning is a big challenge for schools, teachers, and parents because they are required to be able to manage and design learning media to achieve learning goals and prevent student boredom during online learning. This article describes one of the learning media for elementary school students by making animated videos that can be easily understood. The goal was to provide learning methods to attract students' interest in online learning during the pandemic. This learning model emphasized visualization and summary explanation of the material. Community service partners, in this case, are teachers at SD Sumberwindu I, Tanjung Anom District, Nganjuk Regency, and 5th-grade students. Activities are carried out by identifying school problems and training in making animated videos. While using the animated video, the learning purpose will be easy to achieve. This also increases the motivation of the students to be more active in learning by their shelf and seeking new knowledge related to the video. In this community service, we introduced learning materials in the form of animated videos and uploaded them to a YouTube channel. Those videos can be accessed either by teachers or students. This learning model was well-received and well-appreciated by the teachers and students.