Kazuki Matsuo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kazuki Matsuo has a total of 234 co-authors. Here are the top co-authors by number of shared publications:
- Shinsuke Fujioka
Osaka University
20 shared publications - Yasunobu Arikawa
The University of Osaka
12 shared publications Hideo Nagatomo
Institute of Laser Engineering, Osaka University, 2–6, Yamadaoka, Suita, Osaka 565-0871, Japan
11 shared publications- King Fai Farley Law
Institute of Laser Engineering, Osaka University, 2-6 Yamada-oka, Suita, Osaka, 565-0871, Japan
9 shared publications - Tomoyuki Johzaki
Hiroshima University
9 shared publications - Atsushi Sunahara
Blue Laser Fusion, Inc
8 shared publications
Latest Publications
- Open Access
- 16 July 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (3)
Parametric study of extreme ultraviolet light source from 1-μm-wavelength lasers via a simulation approach
Extreme ultraviolet (EUV) lithography, the patterning of fine semiconductor features with EUV light, is based on efficiently generating radiation within a narrow bandwidth around 13.5 nm by laser-produced plasma. In this work, we conducted a comprehensive computational study, following validation of our simulations with benchmark experiments, to assess how different parameters of a 1-μm-wavelength laser impact plasma dynamics and radiation emissions, including spectra, anisotropy, and evaluation of conversion efficiency. The results indicate that while total EUV power increases with both laser intensity and pulse duration, a distinct threshold exists beyond which the conversion efficiency of in-band EUV begins to diminish: The optimal laser intensity for conversion efficiency and isotropy of EUV emission in both spherical and disk targets lies around 1011W/cm2. Furthermore, the 1-μm-wavelength lasers exhibit a lesser dependence of EUV yield upon the interaction area and pulse duration of laser, compared to the 10 μm wavelength case.
- 16 July 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (3)
Open AccessParametric study of extreme ultraviolet light source from 1-μm-wavelength lasers via a simulation approach
Extreme ultraviolet (EUV) lithography, the patterning of fine semiconductor features with EUV light, is based on efficiently generating radiation within a narrow bandwidth around 13.5 nm by laser-produced plasma. In this work, we conducted a comprehensive computational study, following validation of our simulations with benchmark experiments, to assess how different parameters of a 1-μm-wavelength laser impact plasma dynamics and radiation emissions, including spectra, anisotropy, and evaluation of conversion efficiency. The results indicate that while total EUV power increases with both laser intensity and pulse duration, a distinct threshold exists beyond which the conversion efficiency of in-band EUV begins to diminish: The optimal laser intensity for conversion efficiency and isotropy of EUV emission in both spherical and disk targets lies around 1011W/cm2. Furthermore, the 1-μm-wavelength lasers exhibit a lesser dependence of EUV yield upon the interaction area and pulse duration of laser, compared to the 10 μm wavelength case.
- Open Access
- 8 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Industrial Electronics Society
- Vol. 4, 205-213
A Deep Metric Learning-Based Anomaly Detection System for Transparent Objects Using Polarized-Image Fusion
While visual inspection systems have been widely used in many industries, their use in the food and optical equipment industries has been limited. Transparent and reflective materials are often used in these applications, but existing anomaly detection systems have low accuracy in their detection due to low visibility. Here, we developed an anomaly detection system using a polarization camera for reflective and transparent target objects. Two new techniques are developed. First is the polarized image fusion (PIF) technique which suppresses glare from reflective surfaces while highlighting transparent foreign objects. In PIF, four captured polarized images are fused to synthesize a high-quality image according to calculated weight coefficients. The second new technique is an ArcObj-based deep metric learning technique to improve anomaly detection accuracy. The proposed system was evaluated in experiments on three data sets: (a) cookie samples wrapped in transparent plastic bags, (b) transparent plastic bottles, and (c) transparent lenses. High anomaly detection accuracies in terms of the area under the receiver operating characteristic curve (AUC) were achieved: 0.88 AUC for the cookie data set, 0.87 AUC for the bottle data set, and 0.98 AUC for the lens data set. Compared to the state-of-the-art anomaly detection algorithm (Patchcore), the proposed method improved anomaly detection accuracy by 0.09 AUC.
- 8 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Industrial Electronics Society
- Vol. 4, 205-213
Open AccessA Deep Metric Learning-Based Anomaly Detection System for Transparent Objects Using Polarized-Image Fusion
While visual inspection systems have been widely used in many industries, their use in the food and optical equipment industries has been limited. Transparent and reflective materials are often used in these applications, but existing anomaly detection systems have low accuracy in their detection due to low visibility. Here, we developed an anomaly detection system using a polarization camera for reflective and transparent target objects. Two new techniques are developed. First is the polarized image fusion (PIF) technique which suppresses glare from reflective surfaces while highlighting transparent foreign objects. In PIF, four captured polarized images are fused to synthesize a high-quality image according to calculated weight coefficients. The second new technique is an ArcObj-based deep metric learning technique to improve anomaly detection accuracy. The proposed system was evaluated in experiments on three data sets: (a) cookie samples wrapped in transparent plastic bags, (b) transparent plastic bottles, and (c) transparent lenses. High anomaly detection accuracies in terms of the area under the receiver operating characteristic curve (AUC) were achieved: 0.88 AUC for the cookie data set, 0.87 AUC for the bottle data set, and 0.98 AUC for the lens data set. Compared to the state-of-the-art anomaly detection algorithm (Patchcore), the proposed method improved anomaly detection accuracy by 0.09 AUC.
- Open Access
- 31 January 2023
- Published by American Physical Society (APS) in Physical Review Research
- Vol. 5 (1) , 013062
Demonstration of efficient relativistic electron acceleration by surface plasmonics with sequential target processing using high repetition lasers
For high repetition ultrahigh-intensity laser system, automatic alignment of structured target is key to achieving consistent particle acceleration and plasma heating. In this work, we demonstrate efficient electron acceleration with two sequential steps of laser processing using a high repetition rate, 30-fs ultrahigh-intensity laser. The first pulse does laser machining and creates a steep cylindrical crater on the surface of a flat stainless-steel target. The crater is formed by the hydrodynamic expansion of the heated surface and by spallation of the inner, deeper material by nonthermal relativistic electrons. The crater shape is well controlled and reproducible with 200 μm width and 350 μm depth. The second pulse irradiates deeply inside the crater and interacts with the crater wall, efficiently accelerating electrons via surface plasmonic, without need for target realignment. The laser absorption efficiency increases from 32.5 to 97.5% by the process.
- 31 January 2023
- Published by American Physical Society (APS) in Physical Review Research
- Vol. 5 (1) , 013062
Open AccessDemonstration of efficient relativistic electron acceleration by surface plasmonics with sequential target processing using high repetition lasers
For high repetition ultrahigh-intensity laser system, automatic alignment of structured target is key to achieving consistent particle acceleration and plasma heating. In this work, we demonstrate efficient electron acceleration with two sequential steps of laser processing using a high repetition rate, 30-fs ultrahigh-intensity laser. The first pulse does laser machining and creates a steep cylindrical crater on the surface of a flat stainless-steel target. The crater is formed by the hydrodynamic expansion of the heated surface and by spallation of the inner, deeper material by nonthermal relativistic electrons. The crater shape is well controlled and reproducible with 200 μm width and 350 μm depth. The second pulse irradiates deeply inside the crater and interacts with the crater wall, efficiently accelerating electrons via surface plasmonic, without need for target realignment. The laser absorption efficiency increases from 32.5 to 97.5% by the process.
- 15 June 2022
- Published by Physical Society of Japan in Journal of the Physical Society of Japan
- Vol. 91 (6)
Experimental Investigation of Voltage Generation Mechanism of Laser-Driven Coil
A laser-driven coil connecting two plates is one kind of magnetic field generation target used in laser-based high-energy-density physics experiments. In previous studies, the voltage between two p...
- 15 June 2022
- Published by Physical Society of Japan in Journal of the Physical Society of Japan
- Vol. 91 (6)
Experimental Investigation of Voltage Generation Mechanism of Laser-Driven Coil
A laser-driven coil connecting two plates is one kind of magnetic field generation target used in laser-based high-energy-density physics experiments. In previous studies, the voltage between two p...
- 12 October 2021
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 127 (16) , 165001
Enhancement of Ablative Rayleigh-Taylor Instability Growth by Thermal Conduction Suppression in a Magnetic Field
Ablative Rayleigh-Taylor instability growth was investigated to elucidate the fundamental physics of thermal conduction suppression in a magnetic field. Experiments found that unstable modulation growth is faster in an external magnetic field. This result was reproduced by a magnetohydrodynamic simulation based on a Braginskii model of electron thermal transport. An external magnetic field reduces the electron thermal conduction across the magnetic field lines because the Larmor radius of the thermal electrons in the field is much shorter than the temperature scale length. Thermal conduction suppression leads to spatially nonuniform pressure and reduced thermal ablative stabilization, which in turn increases the growth of ablative Rayleigh-Taylor instability.
- 12 October 2021
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 127 (16) , 165001
Enhancement of Ablative Rayleigh-Taylor Instability Growth by Thermal Conduction Suppression in a Magnetic Field
Ablative Rayleigh-Taylor instability growth was investigated to elucidate the fundamental physics of thermal conduction suppression in a magnetic field. Experiments found that unstable modulation growth is faster in an external magnetic field. This result was reproduced by a magnetohydrodynamic simulation based on a Braginskii model of electron thermal transport. An external magnetic field reduces the electron thermal conduction across the magnetic field lines because the Larmor radius of the thermal electrons in the field is much shorter than the temperature scale length. Thermal conduction suppression leads to spatially nonuniform pressure and reduced thermal ablative stabilization, which in turn increases the growth of ablative Rayleigh-Taylor instability.
- Open Access
Enhancement of ablative Rayleigh-Taylor instability growth by thermal conduction suppression in a magnetic field
Ablative Rayleigh-Taylor instability growth was investigated to elucidate the fundamental physics of thermal conduction suppression in a magnetic field. Experiments found that unstable modulation growth is faster in an external magnetic field. This result was reproduced by a magnetohydrodynamic simulation based on a Braginskii model of electron thermal transport. An external magnetic field reduces the electron thermal conduction across the magnetic field lines because the Larmor radius of the thermal electrons in the field is much shorter than the temperature scale length. Thermal conduction suppression leads to spatially nonuniform pressure and reduced thermal ablative stabilization, which in turn increases the growth of ablative Rayleigh-Taylor instability.
Open AccessEnhancement of ablative Rayleigh-Taylor instability growth by thermal conduction suppression in a magnetic field
Ablative Rayleigh-Taylor instability growth was investigated to elucidate the fundamental physics of thermal conduction suppression in a magnetic field. Experiments found that unstable modulation growth is faster in an external magnetic field. This result was reproduced by a magnetohydrodynamic simulation based on a Braginskii model of electron thermal transport. An external magnetic field reduces the electron thermal conduction across the magnetic field lines because the Larmor radius of the thermal electrons in the field is much shorter than the temperature scale length. Thermal conduction suppression leads to spatially nonuniform pressure and reduced thermal ablative stabilization, which in turn increases the growth of ablative Rayleigh-Taylor instability.
- Open Access
- 7 December 2020
- Published by The Royal Society in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 379 (2189) , 20200052
Fast electron transport dynamics and energy deposition in magnetized, imploded cylindrical plasma
Inertial confinement fusion approaches involve the creation of high-energy-density states through compression. High gain scenarios may be enabled by the beneficial heating from fast electrons produced with an intense laser and by energy containment with a high-strength magnetic field. Here, we report experimental measurements from a configuration integrating a magnetized, imploded cylindrical plasma and intense laser-driven electrons as well as multi-stage simulations that show fast electrons transport pathways at different times during the implosion and quantify their energy deposition contribution. The experiment consisted of a CH foam cylinder, inside an external coaxial magnetic field of 5 T, that was imploded using 36 OMEGA laser beams. Two-dimensional (2D) hydrodynamic modelling predicts the CH density reaches 9.0 g cm − 3 , the temperature reaches 920 eV and the external B-field is amplified at maximum compression to 580 T. At pre-determined times during the compression, the intense OMEGA EP laser irradiated one end of the cylinder to accelerate relativistic electrons into the dense imploded plasma providing additional heating. The relativistic electron beam generation was simulated using a 2D particle-in-cell (PIC) code. Finally, three-dimensional hybrid-PIC simulations calculated the electron propagation and energy deposition inside the target and revealed the roles the compressed and self-generated B-fields play in transport. During a time window before the maximum compression time, the self-generated B-field on the compression front confines the injected electrons inside the target, increasing the temperature through Joule heating. For a stronger B-field seed of 20 T, the electrons are predicted to be guided into the compressed target and provide additional collisional heating. This article is part of a discussion meeting issue ‘Prospects for high gain inertial fusion energy (part 2)’.
- 7 December 2020
- Published by The Royal Society in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 379 (2189) , 20200052
Open AccessFast electron transport dynamics and energy deposition in magnetized, imploded cylindrical plasma
Inertial confinement fusion approaches involve the creation of high-energy-density states through compression. High gain scenarios may be enabled by the beneficial heating from fast electrons produced with an intense laser and by energy containment with a high-strength magnetic field. Here, we report experimental measurements from a configuration integrating a magnetized, imploded cylindrical plasma and intense laser-driven electrons as well as multi-stage simulations that show fast electrons transport pathways at different times during the implosion and quantify their energy deposition contribution. The experiment consisted of a CH foam cylinder, inside an external coaxial magnetic field of 5 T, that was imploded using 36 OMEGA laser beams. Two-dimensional (2D) hydrodynamic modelling predicts the CH density reaches 9.0 g cm − 3 , the temperature reaches 920 eV and the external B-field is amplified at maximum compression to 580 T. At pre-determined times during the compression, the intense OMEGA EP laser irradiated one end of the cylinder to accelerate relativistic electrons into the dense imploded plasma providing additional heating. The relativistic electron beam generation was simulated using a 2D particle-in-cell (PIC) code. Finally, three-dimensional hybrid-PIC simulations calculated the electron propagation and energy deposition inside the target and revealed the roles the compressed and self-generated B-fields play in transport. During a time window before the maximum compression time, the self-generated B-field on the compression front confines the injected electrons inside the target, increasing the temperature through Joule heating. For a stronger B-field seed of 20 T, the electrons are predicted to be guided into the compressed target and provide additional collisional heating. This article is part of a discussion meeting issue ‘Prospects for high gain inertial fusion energy (part 2)’.
- 3 September 2020
- Published by American Physical Society (APS) in Physical Review E
- Vol. 102 (3) , 033202
Relativistic magnetic reconnection in laser laboratory for testing an emission mechanism of hard-state black hole system
Magnetic reconnection in a relativistic electron magnetization regime was observed in a laboratory plasma produced by a high-intensity, large energy, picoseconds laser pulse. Magnetic reconnection conditions realized with a laser-driven several kilotesla magnetic field is comparable to that in the accretion disk corona of black hole systems, i.e., Cygnus X-1. We observed particle energy distributions of reconnection outflow jets, which possess a power-law component in a high-energy range. The hardness of the observed spectra could explain the hard-state x-ray emission from accreting black hole systems.
- 3 September 2020
- Published by American Physical Society (APS) in Physical Review E
- Vol. 102 (3) , 033202
Relativistic magnetic reconnection in laser laboratory for testing an emission mechanism of hard-state black hole system
Magnetic reconnection in a relativistic electron magnetization regime was observed in a laboratory plasma produced by a high-intensity, large energy, picoseconds laser pulse. Magnetic reconnection conditions realized with a laser-driven several kilotesla magnetic field is comparable to that in the accretion disk corona of black hole systems, i.e., Cygnus X-1. We observed particle energy distributions of reconnection outflow jets, which possess a power-law component in a high-energy range. The hardness of the observed spectra could explain the hard-state x-ray emission from accreting black hole systems.
- 1 August 2020
- Published by Elsevier in High Energy Density Physics
- Vol. 36
Two-color laser-plasma interactions for efficient production of non-thermal hot electrons
- 1 August 2020
- Published by Elsevier in High Energy Density Physics
- Vol. 36
Two-color laser-plasma interactions for efficient production of non-thermal hot electrons
- 1 August 2020
- Published by Elsevier in High Energy Density Physics
- Vol. 36
Flash X-ray backlight technique using a Fresnel phase zone plate for measuring interfacial instability
- 1 August 2020
- Published by Elsevier in High Energy Density Physics
- Vol. 36
Flash X-ray backlight technique using a Fresnel phase zone plate for measuring interfacial instability