Subekti Subekti
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Subekti Subekti has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
Achmad Syaifudin
Mechanical Engineering Department, Faculty of Industrial and Technology, Institut Teknologi Sepuluh Nopember, ITS Sukolilo Campus, Surabaya, 60111, Indonesia
2 shared publications- Achmad Syaifudin
Department of Mechanical Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia
2 shared publications - Harus Laksana Guntur
Institut Teknologi Sepuluh Nopember, Indonesia
2 shared publications Muhammad Nurul Hidayat
PT. Astra Daihatsu Motor, Jakarta, Indonesia
2 shared publications- Yohanes Pringeten Dilianto Sembiring Depari
National Research and Innovation Agency of Republic Indonesia (BRIN), Jakarta Pusat 10340, Indonesia
2 shared publications Abdul Hamid
Mercu Buana University, Indonesia
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by Walter de Gruyter GmbH in Open Engineering
- Vol. 16 (1)
Bibliometric review of research trends in energy harvesting from flow-induced vibrations
This study presents a comprehensive bibliometric review of the concept of harvesting energy produced by flow-induced vibration, aiming to map the scientific progress, knowledge structure, and evolving research themes in this field. Although research in this domain has significantly increased in recent years, a systematic quantitative overview of influential contributions, technology trends, and emerging directions remains limited. To address this gap, five key bibliometric analyses were conducted: (1) annual publication trends, including journal articles and conference papers; (2) identification of the most influential and highly cited studies; (3) mapping of thematic development and conceptual evolution; (4) analysis of systems most commonly associated with Flow-Induced Vibration Energy Harvesting (FIV-EH); and (5) classification of diverse harvesting mechanisms applied within existing studies. Data were retrieved from the Scopus and Google Scholar database on June 2, 2025. A total of 607 publications were included after applying the exclusion criteria. VOSviewer and Biblioshiny for R were used to analyze co-authorship networks, citation performance, and keyword co-occurrence. The findings reveal the lack of a standardized definition of FIV-EH, indicating conceptual fragmentation in the literature. Furthermore, the results highlight three major directions essential for advancing implementation in real applications: (1) increasing the adoption of renewable energy within the energy mix, (2) improving energy efficiency, and (3) reducing GHG emissions and air pollution. This study proposes a conceptual framework and provides insights that can guide future research, strengthen technological development, and support sustainable energy initiatives globally.
- 1 January 2026
- Published by Walter de Gruyter GmbH in Open Engineering
- Vol. 16 (1)
Open AccessBibliometric review of research trends in energy harvesting from flow-induced vibrations
This study presents a comprehensive bibliometric review of the concept of harvesting energy produced by flow-induced vibration, aiming to map the scientific progress, knowledge structure, and evolving research themes in this field. Although research in this domain has significantly increased in recent years, a systematic quantitative overview of influential contributions, technology trends, and emerging directions remains limited. To address this gap, five key bibliometric analyses were conducted: (1) annual publication trends, including journal articles and conference papers; (2) identification of the most influential and highly cited studies; (3) mapping of thematic development and conceptual evolution; (4) analysis of systems most commonly associated with Flow-Induced Vibration Energy Harvesting (FIV-EH); and (5) classification of diverse harvesting mechanisms applied within existing studies. Data were retrieved from the Scopus and Google Scholar database on June 2, 2025. A total of 607 publications were included after applying the exclusion criteria. VOSviewer and Biblioshiny for R were used to analyze co-authorship networks, citation performance, and keyword co-occurrence. The findings reveal the lack of a standardized definition of FIV-EH, indicating conceptual fragmentation in the literature. Furthermore, the results highlight three major directions essential for advancing implementation in real applications: (1) increasing the adoption of renewable energy within the energy mix, (2) improving energy efficiency, and (3) reducing GHG emissions and air pollution. This study proposes a conceptual framework and provides insights that can guide future research, strengthen technological development, and support sustainable energy initiatives globally.
- Open Access
- 1 January 2026
- Published by Wiley in Journal of Engineering
- Vol. 2026 (1)
Technological Evolution and Safety Enhancement of Automatic Couplers in Modern Railway Systems: A Systematic Review
The global railway industry is undergoing a significant transformation toward a safer, more efficient, and sustainable transportation system, in which the automatic coupler serves as a vital component ensuring connectivity, safety, and operational reliability of train formations. Despite rapid technological advancements, existing research on automatic couplers remains fragmented, with limited integration between mechanical design, energy efficiency, and safety aspects. This study is aimed at systematically analyzing the technological evolution of automatic couplers in railway systems through a systematic literature review (SLR) approach based on the PRISMA protocol, utilizing literature indexed in Scopus and Web of Science from 2000 to 2025. The collected data were thematically analyzed to identify research trends, coupler classifications, and their contributions to operational efficiency and safety. The findings reveal a clear evolution from conventional mechanical coupling systems toward the digital automatic coupler (DAC), which integrates mechanical, electropneumatic, and digital communication functions. These innovations have proven to enhance efficiency by reducing longitudinal forces, extending fatigue life, and minimizing maintenance costs while simultaneously strengthening safety through energy absorption systems, high‐strength materials, and synchronized digital brake control. Scientifically, this study provides a novel contribution by offering a comprehensive mapping of the technological trajectory of automatic couplers and emphasizing the urgency of integrating mechanical and digital design principles to support automation and sustainability in the future of railway systems.
- 1 January 2026
- Published by Wiley in Journal of Engineering
- Vol. 2026 (1)
Open AccessTechnological Evolution and Safety Enhancement of Automatic Couplers in Modern Railway Systems: A Systematic Review
The global railway industry is undergoing a significant transformation toward a safer, more efficient, and sustainable transportation system, in which the automatic coupler serves as a vital component ensuring connectivity, safety, and operational reliability of train formations. Despite rapid technological advancements, existing research on automatic couplers remains fragmented, with limited integration between mechanical design, energy efficiency, and safety aspects. This study is aimed at systematically analyzing the technological evolution of automatic couplers in railway systems through a systematic literature review (SLR) approach based on the PRISMA protocol, utilizing literature indexed in Scopus and Web of Science from 2000 to 2025. The collected data were thematically analyzed to identify research trends, coupler classifications, and their contributions to operational efficiency and safety. The findings reveal a clear evolution from conventional mechanical coupling systems toward the digital automatic coupler (DAC), which integrates mechanical, electropneumatic, and digital communication functions. These innovations have proven to enhance efficiency by reducing longitudinal forces, extending fatigue life, and minimizing maintenance costs while simultaneously strengthening safety through energy absorption systems, high‐strength materials, and synchronized digital brake control. Scientifically, this study provides a novel contribution by offering a comprehensive mapping of the technological trajectory of automatic couplers and emphasizing the urgency of integrating mechanical and digital design principles to support automation and sustainability in the future of railway systems.
- Open Access
- 29 May 2025
- Published by PT. Fest Digital Solution - Bhinneka Publishing in Jurnal Pengabdian Masyarakat Bhinneka
- Vol. 3 (4) , 737-743
Pelatihan Pengoperasian Mesin Pengurai Sabut Kelapa Di RPTRA Menara Kelurahaan Kembangan Selatan Jakarta Barat
\ Proses pengolahan limbah sabut kelapa dengan menggunakan mesin pengurai sabut kelapa dapat memudahkan proses produksi. Hasil produksi dari penguraian sabut menghasilkan cocofiber dan cocofeat yang dapat di manfaatkan dalam berbagai macam produk seperti jok mobil, matras, keset, kerajinan tangan, papan serat, serta produk ramah lingkugan lainnya. Hal tersebut menunjukkan bahwa penggunaan produk-produk rumahan tidak hanya berasal dari bahan baku sintetis. Pemanfaatan sabut kelapa dengan sumber bahan baku yang relatif mudah didapatkan dapat membantu perindustrian ekonomi kecil dan menengah, dengan demikian pengabdian masyarakat melalui merancang mesin pengurai sabut kelapa menggunkan motor bakar bensin sebagai penggerak mesin untuk mempermudah proses penguraian sabut kelapa sebelum diproduksi. Sehingga tujuan pengabdian masyarakat dalam menanfaatkan limbah serabut kelapa menjadi barang dapat bernilai ekonomis sehingga dapat meningkatkan taraf hidup masyarakat sekitar. Kegiatan ini dilakukan dengan ceramah dan demo mesin pengurai sabut kelapa. Masyarakat yang akan terlibat dari kegiatan ini sekitar 40 orang yang diatur oleh RT/RW setempat, Kegiatan ini sangat diapresiasi oleh para peserta dimana hampir 88 % peserta memahami isi materi dan praktek Mesin Serabut Kelapa. Sedangkan untuk nilai terendah sekitar 72 % menyatakan bahwa kegiatan ini sangat diperlukan oleh para peserta dan berlangsung sukses dengan banyaknya pertanyaan dan saran agar kegiatan ini dilanjutkan.
- 29 May 2025
- Published by PT. Fest Digital Solution - Bhinneka Publishing in Jurnal Pengabdian Masyarakat Bhinneka
- Vol. 3 (4) , 737-743
Open AccessPelatihan Pengoperasian Mesin Pengurai Sabut Kelapa Di RPTRA Menara Kelurahaan Kembangan Selatan Jakarta Barat
\ Proses pengolahan limbah sabut kelapa dengan menggunakan mesin pengurai sabut kelapa dapat memudahkan proses produksi. Hasil produksi dari penguraian sabut menghasilkan cocofiber dan cocofeat yang dapat di manfaatkan dalam berbagai macam produk seperti jok mobil, matras, keset, kerajinan tangan, papan serat, serta produk ramah lingkugan lainnya. Hal tersebut menunjukkan bahwa penggunaan produk-produk rumahan tidak hanya berasal dari bahan baku sintetis. Pemanfaatan sabut kelapa dengan sumber bahan baku yang relatif mudah didapatkan dapat membantu perindustrian ekonomi kecil dan menengah, dengan demikian pengabdian masyarakat melalui merancang mesin pengurai sabut kelapa menggunkan motor bakar bensin sebagai penggerak mesin untuk mempermudah proses penguraian sabut kelapa sebelum diproduksi. Sehingga tujuan pengabdian masyarakat dalam menanfaatkan limbah serabut kelapa menjadi barang dapat bernilai ekonomis sehingga dapat meningkatkan taraf hidup masyarakat sekitar. Kegiatan ini dilakukan dengan ceramah dan demo mesin pengurai sabut kelapa. Masyarakat yang akan terlibat dari kegiatan ini sekitar 40 orang yang diatur oleh RT/RW setempat, Kegiatan ini sangat diapresiasi oleh para peserta dimana hampir 88 % peserta memahami isi materi dan praktek Mesin Serabut Kelapa. Sedangkan untuk nilai terendah sekitar 72 % menyatakan bahwa kegiatan ini sangat diperlukan oleh para peserta dan berlangsung sukses dengan banyaknya pertanyaan dan saran agar kegiatan ini dilanjutkan.
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3236 (1) , 020037
Experimental identification an elastically supported cylinder under free vibration using the Hilbert and wavelet transform
The application of wavelet transforms (WT) and Hilbert transform (HT) for identification of an elastically support cylinders due to free vibration will be expla The application of wavelet transforms (WT) and Hilbert transform (HT) for identification of an elastically support cylinders due to free vibration will be expla
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3236 (1) , 020037
Experimental identification an elastically supported cylinder under free vibration using the Hilbert and wavelet transform
The application of wavelet transforms (WT) and Hilbert transform (HT) for identification of an elastically support cylinders due to free vibration will be expla The application of wavelet transforms (WT) and Hilbert transform (HT) for identification of an elastically support cylinders due to free vibration will be expla
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3239 (1) , 050003
Effect of dimples for fluid motion of an elastically supported cylinder at velocities relevant to ducting environment using computational fluid dynamics
This paper discusses the effect of dimpling on an elastic cylinder using computational fluid dynamics (CFD) simulation. The simulation CFD approach is used beca This paper discusses the effect of dimpling on an elastic cylinder using computational fluid dynamics (CFD) simulation. The simulation CFD approach is used beca
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3239 (1) , 050003
Effect of dimples for fluid motion of an elastically supported cylinder at velocities relevant to ducting environment using computational fluid dynamics
This paper discusses the effect of dimpling on an elastic cylinder using computational fluid dynamics (CFD) simulation. The simulation CFD approach is used beca This paper discusses the effect of dimpling on an elastic cylinder using computational fluid dynamics (CFD) simulation. The simulation CFD approach is used beca
- Open Access
- 31 October 2023
- Published by Universitas Sultan Ageng Tirtayasa (ASCEE) in Fondasi : Jurnal Teknik Sipil
- Vol. 12 (2) , 163-173
The Effect of Groundsill Height on Bridge Pillar Flow Characteristics (Physical Model)
The Effect of Groundsill Height on Bridge Pillar Flow Characteristics (Physical Model)
- 31 October 2023
- Published by Universitas Sultan Ageng Tirtayasa (ASCEE) in Fondasi : Jurnal Teknik Sipil
- Vol. 12 (2) , 163-173
Open AccessThe Effect of Groundsill Height on Bridge Pillar Flow Characteristics (Physical Model)
The Effect of Groundsill Height on Bridge Pillar Flow Characteristics (Physical Model)
- Open Access
- 19 April 2021
- Published by Institute for Research on Innovation and Industrial System (IRIS) in International Journal of Advanced Technology in Mechanical, Mechatronics and Materials
- Vol. 2 (1) , 55-60
Measurement of Vibration on The Alternator Due to The Influence of Rotation Speed
The alternator or dynamo ampere is a device that functions as a generator that produces alternating current (AC) and converts it to direct current (DC). Signs of damage that often occur due to damage to the Alternator are the smell of burning, squeaking, dim spotlights, indicator lights, malfunction of the battery, and the supply of electricity. These signs will cause the vehicle to stop in the middle of the trip the electricity supply is very lacking. This requires that preventive maintenance checks on the alternator are a must in the automotive world. In this paper we research measuring the vibration of the alternator due to the influence of rotation speed (750 rpm and 1800 rpm), to predict damage to the alternator of the Daihatsu Luxio vehicle. The results of this study indicate that at the rotational speed of 750 rpm and 1800 rpm, were found 1x rpm the condition of the vibration amplitude on the alternator is smaller than the alternator in poor condition, this is due to the presence of an unbalanced alternator. Also, vibration due to misalignment is obtained because it has characteristics, among others: vibrations with a frequency of 1xRPM and/or accompanied by a relatively large 2xRPM, and relatively high vibration in the axial direction.
- 19 April 2021
- Published by Institute for Research on Innovation and Industrial System (IRIS) in International Journal of Advanced Technology in Mechanical, Mechatronics and Materials
- Vol. 2 (1) , 55-60
Open AccessMeasurement of Vibration on The Alternator Due to The Influence of Rotation Speed
The alternator or dynamo ampere is a device that functions as a generator that produces alternating current (AC) and converts it to direct current (DC). Signs of damage that often occur due to damage to the Alternator are the smell of burning, squeaking, dim spotlights, indicator lights, malfunction of the battery, and the supply of electricity. These signs will cause the vehicle to stop in the middle of the trip the electricity supply is very lacking. This requires that preventive maintenance checks on the alternator are a must in the automotive world. In this paper we research measuring the vibration of the alternator due to the influence of rotation speed (750 rpm and 1800 rpm), to predict damage to the alternator of the Daihatsu Luxio vehicle. The results of this study indicate that at the rotational speed of 750 rpm and 1800 rpm, were found 1x rpm the condition of the vibration amplitude on the alternator is smaller than the alternator in poor condition, this is due to the presence of an unbalanced alternator. Also, vibration due to misalignment is obtained because it has characteristics, among others: vibrations with a frequency of 1xRPM and/or accompanied by a relatively large 2xRPM, and relatively high vibration in the axial direction.
- Open Access
- 3 August 2020
- Published by Universitas Muhammadiyah Magelang in Automotive Experiences
- Vol. 3 (3) , 89-95
Hilbert Transform Analyzer for Mechanical Fault Detection of Vehicle Alternators
Checking the alternator with mechanical measurements of moving parts takes sufficient time, especially in compact design engines. Therefore, this article presents a new method for alternator fault detection using the Hilbert transform application. The instantaneous amplitude and frequency are used as input variables for fault detection. Joint time-frequency analysis based on the wavelet analysis is also applied to identify the nonlinear characteristics. Various wavelet functions are examined, and some recommendations regarding the most suitable ones and the interpretation of the results are discussed. As a result, the backbone curve obtained from the instantaneous amplitude and frequency demonstrates the presence of the nonlinear phenomena, which can help make decisions about an alternator in normal conditions or indicate fault detection. From the test results, this method is very promising to be applied as part of vehicle's preventive maintenance.
- 3 August 2020
- Published by Universitas Muhammadiyah Magelang in Automotive Experiences
- Vol. 3 (3) , 89-95
Open AccessHilbert Transform Analyzer for Mechanical Fault Detection of Vehicle Alternators
Checking the alternator with mechanical measurements of moving parts takes sufficient time, especially in compact design engines. Therefore, this article presents a new method for alternator fault detection using the Hilbert transform application. The instantaneous amplitude and frequency are used as input variables for fault detection. Joint time-frequency analysis based on the wavelet analysis is also applied to identify the nonlinear characteristics. Various wavelet functions are examined, and some recommendations regarding the most suitable ones and the interpretation of the results are discussed. As a result, the backbone curve obtained from the instantaneous amplitude and frequency demonstrates the presence of the nonlinear phenomena, which can help make decisions about an alternator in normal conditions or indicate fault detection. From the test results, this method is very promising to be applied as part of vehicle's preventive maintenance.
- Open Access
- 1 January 2020
- Published by EJournal Publishing in International Journal of Environmental Science and Development
- Vol. 11 (12) , 555-560
The Effect of Blade Number on Small Horizontal Axis Wind Turbine (HAWT) Performance: An Experimental and Numerical Study
The effect of blade number on small Horizontal Axis Wind Turbine (HAWT) has been studied experimentally and numerically in this research. The turbine blade is made of a flat metal sheet and the tip was formed to shape a winglet. The 5-blades turbine was tested inside a wind tunnel for performance investigation at different wind speeds. The experiment was conducted under various wind speed, i.e. 3.5 m/s, 3.9 m/s, 4.3 m/s, 4.6 m/s dan 5 m/s. Furthermore, three wind turbines geometry with different blade number (3, 4, and 5 blades) were built for numerical study purpose by using Ansys Fluent and the results were compared to the experimental one. The results show that the blade number does increase the wind turbine torque and there is also more power generated from the turbine with more blade numbers since torque is related to pressure. Moreover, the winglet helps the blade to retain the flow and increases the pressure on the blade surface. However, the experimental measurements obtained were smaller than the numerical predictions about 50% on the average since more unidentified losses existed and not accounted for the calculation.
- 1 January 2020
- Published by EJournal Publishing in International Journal of Environmental Science and Development
- Vol. 11 (12) , 555-560
Open AccessThe Effect of Blade Number on Small Horizontal Axis Wind Turbine (HAWT) Performance: An Experimental and Numerical Study
The effect of blade number on small Horizontal Axis Wind Turbine (HAWT) has been studied experimentally and numerically in this research. The turbine blade is made of a flat metal sheet and the tip was formed to shape a winglet. The 5-blades turbine was tested inside a wind tunnel for performance investigation at different wind speeds. The experiment was conducted under various wind speed, i.e. 3.5 m/s, 3.9 m/s, 4.3 m/s, 4.6 m/s dan 5 m/s. Furthermore, three wind turbines geometry with different blade number (3, 4, and 5 blades) were built for numerical study purpose by using Ansys Fluent and the results were compared to the experimental one. The results show that the blade number does increase the wind turbine torque and there is also more power generated from the turbine with more blade numbers since torque is related to pressure. Moreover, the winglet helps the blade to retain the flow and increases the pressure on the blade surface. However, the experimental measurements obtained were smaller than the numerical predictions about 50% on the average since more unidentified losses existed and not accounted for the calculation.
- Open Access
- 24 September 2019
- Published by Universitas Mercu Buana in SINERGI
- Vol. 23 (3) , 191-198
INSPECTING A BUMP TEST IN THE MAINTENANCE OF A 1200-CC DAIHATSU SIGRA DISC BRAKE
A motorized vehicle needs a system that can not only reduce the speed and stop the vehicle but can also serve as a safety tool and ensure a safe distribution which is called a braking system. It is important to conduct maintenance of a disc brake that is part of the braking system. Therefore, this study developed a technique to inspect a 1200-cc Daihatsu Sigra disc brake through the vibration measurement using a bump test. A disc brake is comprised of three fields: A (located next to the center of the disc brake), B ( in the middle diameter), and C ( in the outer diameter of the disc brake). Each field has ten measurement points. This study showed that disc brake damages occurring in field A were at points 1-3, and they appeared after the 250-Hz frequency. Meanwhile, in fields B and C, at all measurement points, there were no changes taking place at any frequency.
- 24 September 2019
- Published by Universitas Mercu Buana in SINERGI
- Vol. 23 (3) , 191-198
Open AccessINSPECTING A BUMP TEST IN THE MAINTENANCE OF A 1200-CC DAIHATSU SIGRA DISC BRAKE
A motorized vehicle needs a system that can not only reduce the speed and stop the vehicle but can also serve as a safety tool and ensure a safe distribution which is called a braking system. It is important to conduct maintenance of a disc brake that is part of the braking system. Therefore, this study developed a technique to inspect a 1200-cc Daihatsu Sigra disc brake through the vibration measurement using a bump test. A disc brake is comprised of three fields: A (located next to the center of the disc brake), B ( in the middle diameter), and C ( in the outer diameter of the disc brake). Each field has ten measurement points. This study showed that disc brake damages occurring in field A were at points 1-3, and they appeared after the 250-Hz frequency. Meanwhile, in fields B and C, at all measurement points, there were no changes taking place at any frequency.