Wenfeng Han
Wenfeng Han has a total of 174 co-authors. Here are the top co-authors by number of shared publications:
Haodong Tang
Institute of Catalysis, College of Chemical Engineering Zhejiang University of Technology Chaowang Road 18 Hangzhou 310032 PR China
26 shared publications- Ying Li
Correspondence to: Prof. Ying Li, Institute of Industrial Catalysis, State Key Laboratory of Green Chemistry Synthesis Technology, College of Chemical Engineering, Zhejiang University of Technology, Hangzhou 310014, Zhejiang, China
26 shared publications Huazhang Liu
24 shared publicationsBing Liu
Institute of Industrial Catalysis State Key Laboratory Breeding Base of Green‐Chemical Synthesis Technology College of Chemical Engineering Zhejiang University of Technology Hangzhou China
19 shared publications- Haodong Tang
College of Chemical Engineering, Zhejiang University of Technology, Hangzhou 310014, China
10 shared publications - Bogdan Z. Dlugogorski
Energy and Resources Institute, Charles Darwin University, Ellengowan Drive, Purple 12.01.08, Casuarina, NT 0810, Australia
9 shared publications
Latest Publications
- 25 June 2026
- Published by Wiley in Chempluschem
- Vol. 91 (6) , e70195
Stabilizing Pd Catalysts on Pentacoordinated Al 3+ Sites of Alumina for Efficient Hydrogenation of Hexafluoropropylene
Achieving high dispersion and stability of noble metals on conventional supports remains a key challenge in catalysis. Herein, we address this issue by designing an alumina support enriched with pentacoordinated Al 3+ (Al 3+ penta) sites, which serve as effective anchoring centers for Pd species. The catalyst was applied to the gas‐phase hydrogenation of hexafluoropropylene (HFP), a critical step in the synthesis of the low‐global‐warming‐potential refrigerant HFO‐1234yf. Comprehensive characterization, including 27 Al MAS NMR, XPS, and HRTEM suggest that the Al 3+ penta sites strongly interact with Pd, forming Pd‐O‐Al bridge structures, thereby suppressing Pd aggregation and enhancing Pd dispersion. The optimized 0.5 wt% Pd/EA‐Al 2 O 3 catalyst achieved approximately 92% HFP conversion at 90°C, significantly outperforming conventional Pd/γ‐Al 2 O 3 counterpart. This work underscores the decisive role of Al 3+ penta sites in regulating metal‐support interactions and provides a viable strategy for designing efficient catalysts with reduced noble‐metal loadings.
- 25 June 2026
- Published by Wiley in Chempluschem
- Vol. 91 (6) , e70195
Stabilizing Pd Catalysts on Pentacoordinated Al 3+ Sites of Alumina for Efficient Hydrogenation of Hexafluoropropylene
Achieving high dispersion and stability of noble metals on conventional supports remains a key challenge in catalysis. Herein, we address this issue by designing an alumina support enriched with pentacoordinated Al 3+ (Al 3+ penta) sites, which serve as effective anchoring centers for Pd species. The catalyst was applied to the gas‐phase hydrogenation of hexafluoropropylene (HFP), a critical step in the synthesis of the low‐global‐warming‐potential refrigerant HFO‐1234yf. Comprehensive characterization, including 27 Al MAS NMR, XPS, and HRTEM suggest that the Al 3+ penta sites strongly interact with Pd, forming Pd‐O‐Al bridge structures, thereby suppressing Pd aggregation and enhancing Pd dispersion. The optimized 0.5 wt% Pd/EA‐Al 2 O 3 catalyst achieved approximately 92% HFP conversion at 90°C, significantly outperforming conventional Pd/γ‐Al 2 O 3 counterpart. This work underscores the decisive role of Al 3+ penta sites in regulating metal‐support interactions and provides a viable strategy for designing efficient catalysts with reduced noble‐metal loadings.
- 4 April 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (14) , 7471-7482
Controlling Hydroxyl Content in Pseudo-Boehmite Precursors for Efficient AlF 3 Catalysts in HFC-245fa Dehydrofluorination
- 4 April 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (14) , 7471-7482
Controlling Hydroxyl Content in Pseudo-Boehmite Precursors for Efficient AlF 3 Catalysts in HFC-245fa Dehydrofluorination
- 20 January 2026
- Published by Elsevier in Applied Catalysis A: General
- Vol. 713
Dehydrofluorination of 1,1,1,2-tetrafluoroethane to 1,1,2-trifluoroethylene by Ce-F-Al active center over NiAl spinel
- 20 January 2026
- Published by Elsevier in Applied Catalysis A: General
- Vol. 713
Dehydrofluorination of 1,1,1,2-tetrafluoroethane to 1,1,2-trifluoroethylene by Ce-F-Al active center over NiAl spinel
- 24 February 2025
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 13 (2)
Interface catalysis over AlPO4/Al2O3 with F-Al-O species for resource utilization of hydrofluorocarbon greenhouse gas
- 24 February 2025
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 13 (2)
Interface catalysis over AlPO4/Al2O3 with F-Al-O species for resource utilization of hydrofluorocarbon greenhouse gas
- 25 December 2024
- Published by Elsevier in Applied Catalysis A: General
- Vol. 691
Efficient conversion of fluorinated greenhouse gases using aluminum-doped hydroxyapatite
- 25 December 2024
- Published by Elsevier in Applied Catalysis A: General
- Vol. 691
Efficient conversion of fluorinated greenhouse gases using aluminum-doped hydroxyapatite
- Open Access
Synthesis of Ultrahigh Molecular Weight Poly (Trifluoroethyl Methacrylate) Initiated by the Combination of Palladium Nanoparticles with Organic Halides
Ultrahigh molecular weight polymers display outstanding properties and have great application potential. However, the traditional polymerization methods have inevitable disadvantages that challenge the green synthesis of ultrahigh molecular weight polymers. The paper achieved an ultrahigh molecular weight poly (trifluoroethyl methacrylate) via a novel polymerization and discussed the mechanistic, kinetic, and experimental aspects. The combination of palladium nanoparticles with ethyl 2-bromopropionate has been identified as an exceedingly efficient system for initiating the polymerization of trifluoroethyl methacrylate. An ultrahigh molecular weight poly (trifluoroethyl methacrylate) with a number-average molecular weight up to 3.03 × 106 Da has been synthesized at a feeding molar ratio of [poly (trifluoroethyl methacrylate)]/[ethyl 2-bromopropionate]/[palladium nanoparticles] = 3.95 × 104:756:1 at 70 °C. The reaction orders concerning palladium nanoparticles, ethyl 2-bromopropionate, and poly (trifluoroethyl methacrylate) were determined to be 0.59, 0.34, and 1.38, respectively. By analyzing a series of characterizations, we verified that the polymerization of poly (trifluoroethyl methacrylate) was initiated by the ethyl 2-bromopropionate residue radicals, which were generated from the interaction between palladium nanoparticles and ethyl 2-bromopropionate. The comparatively large size of the palladium nanoparticles provided a barrier to chain-growing radicals, promoting the synthesis of ultrahigh molecular weight polymers.
Open AccessSynthesis of Ultrahigh Molecular Weight Poly (Trifluoroethyl Methacrylate) Initiated by the Combination of Palladium Nanoparticles with Organic Halides
Ultrahigh molecular weight polymers display outstanding properties and have great application potential. However, the traditional polymerization methods have inevitable disadvantages that challenge the green synthesis of ultrahigh molecular weight polymers. The paper achieved an ultrahigh molecular weight poly (trifluoroethyl methacrylate) via a novel polymerization and discussed the mechanistic, kinetic, and experimental aspects. The combination of palladium nanoparticles with ethyl 2-bromopropionate has been identified as an exceedingly efficient system for initiating the polymerization of trifluoroethyl methacrylate. An ultrahigh molecular weight poly (trifluoroethyl methacrylate) with a number-average molecular weight up to 3.03 × 106 Da has been synthesized at a feeding molar ratio of [poly (trifluoroethyl methacrylate)]/[ethyl 2-bromopropionate]/[palladium nanoparticles] = 3.95 × 104:756:1 at 70 °C. The reaction orders concerning palladium nanoparticles, ethyl 2-bromopropionate, and poly (trifluoroethyl methacrylate) were determined to be 0.59, 0.34, and 1.38, respectively. By analyzing a series of characterizations, we verified that the polymerization of poly (trifluoroethyl methacrylate) was initiated by the ethyl 2-bromopropionate residue radicals, which were generated from the interaction between palladium nanoparticles and ethyl 2-bromopropionate. The comparatively large size of the palladium nanoparticles provided a barrier to chain-growing radicals, promoting the synthesis of ultrahigh molecular weight polymers.
- 8 February 2024
- Published by Elsevier in Journal of Fluorine Chemistry
- Vol. 274
Stabilizing F-Al-O active center via confinement of Al2O3 in SiC framework for conversion of 1,1-difluoroethane greenhouse gas
- 8 February 2024
- Published by Elsevier in Journal of Fluorine Chemistry
- Vol. 274
Stabilizing F-Al-O active center via confinement of Al2O3 in SiC framework for conversion of 1,1-difluoroethane greenhouse gas
- 31 January 2024
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 14 (4) , 2358-2368
Carbon-Interacted AlF3 Clusters as Robust Catalyst for Dehydrofluorination Reaction with Enhanced Undercoordination and Stability
- 31 January 2024
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 14 (4) , 2358-2368
Carbon-Interacted AlF3 Clusters as Robust Catalyst for Dehydrofluorination Reaction with Enhanced Undercoordination and Stability
- 22 February 2023
- Published by Elsevier in Applied Catalysis B: Environment and Energy
- Vol. 328
Robust dehydrofluorination catalyst with host-guest structure between VOFx clusters and MgFe-LDF
- 22 February 2023
- Published by Elsevier in Applied Catalysis B: Environment and Energy
- Vol. 328
Robust dehydrofluorination catalyst with host-guest structure between VOFx clusters and MgFe-LDF