Máté Náfrádi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Máté Náfrádi has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Tünde Alapi
Department of Molecular and Analytical Chemistry, University of Szeged, H-6720 Szeged, Hungary
8 shared publications Krisztina Schrantz
4 shared publications- Gábor Bencsik
Department of Physical Chemistry and Materials Science, University of Szeged, Rerrich Béla tér 1, H-6720 Szeged, Hungary
3 shared publications - Luca Farkas
Department of Inorganic, Organic and Analytical Chemistry, University of Szeged, Dóm Square 7-8, H-6720 Szeged, Hungary
3 shared publications - Bence Veres
Department of Inorganic, Organic and Analytical Chemistry, University of Szeged, Dóm Square 7-8, H-6720 Szeged, Hungary
2 shared publications - Biljana Abramović
Department of Chemistry, Biochemistry and Environmental Protection, University of Novi Sad Faculty of Sciences, Trg Dositeja Obradovića 3, 21000 Novi Sad, Serbia
2 shared publications
Latest Publications
- Open Access
Comparison of TiO2 and ZnO for Heterogeneous Photocatalytic Activation of the Peroxydisulfate Ion in Trimethoprim Degradation
The persulfate-based advanced oxidation process is a promising method for degrading organic pollutants. Herein, TiO2 and ZnO photocatalysts were combined with the peroxydisulfate ion (PDS) to enhance the efficiency. ZnO was significantly more efficient in PDS conversion and SO4•− generation than TiO2. For ZnO, the PDS increased the transformation rate of the trimethoprim antibiotic from 1.58 × 10−7 M s−1 to 6.83 × 10−7 M s−1. However, in the case of TiO2, the moderated positive effect was manifested mainly in O2-free suspensions. The impact of dissolved O2 and trimethoprim on PDS transformation was also studied. The results reflected that the interaction of O2, PDS, and TRIM with the surface of the photocatalyst and their competition for photogenerated charges must be considered. The effect of radical scavengers confirmed that in addition to SO4•−, •OH plays an essential role even in O2-free suspensions, and the contribution of SO4•− to the transformation is much more significant for ZnO than for TiO2. The negative impact of biologically treated domestic wastewater as a matrix was manifested, most probably because of the radical scavenging capacity of Cl− and HCO3−. Nevertheless, in the case of ZnO, the positive effect of PDS successfully overcompensates that, due to the efficient SO4•− generation. Reusability tests were performed in Milli-Q water and biologically treated domestic wastewater, and only a slight decrease in the reactivity of ZnO photocatalysts was observed.
Open AccessComparison of TiO2 and ZnO for Heterogeneous Photocatalytic Activation of the Peroxydisulfate Ion in Trimethoprim Degradation
The persulfate-based advanced oxidation process is a promising method for degrading organic pollutants. Herein, TiO2 and ZnO photocatalysts were combined with the peroxydisulfate ion (PDS) to enhance the efficiency. ZnO was significantly more efficient in PDS conversion and SO4•− generation than TiO2. For ZnO, the PDS increased the transformation rate of the trimethoprim antibiotic from 1.58 × 10−7 M s−1 to 6.83 × 10−7 M s−1. However, in the case of TiO2, the moderated positive effect was manifested mainly in O2-free suspensions. The impact of dissolved O2 and trimethoprim on PDS transformation was also studied. The results reflected that the interaction of O2, PDS, and TRIM with the surface of the photocatalyst and their competition for photogenerated charges must be considered. The effect of radical scavengers confirmed that in addition to SO4•−, •OH plays an essential role even in O2-free suspensions, and the contribution of SO4•− to the transformation is much more significant for ZnO than for TiO2. The negative impact of biologically treated domestic wastewater as a matrix was manifested, most probably because of the radical scavenging capacity of Cl− and HCO3−. Nevertheless, in the case of ZnO, the positive effect of PDS successfully overcompensates that, due to the efficient SO4•− generation. Reusability tests were performed in Milli-Q water and biologically treated domestic wastewater, and only a slight decrease in the reactivity of ZnO photocatalysts was observed.
- Open Access
Application of BiOX Photocatalyst to Activate Peroxydisulfate Ion-Investigation of a Combined Process for the Removal of Organic Pollutants from Water
The persulfate-based advanced oxidation processes employing heterogeneous photocatalysts to generate sulfate radicals (SO4•−) from peroxydisulfate ion (PDS, S2O82−) have been extensively investigated to remove organic pollutants. In this work, BiOX (X = Cl, Br, and I) photocatalysts were investigated to activate PDS and enhance the transformation rate of various organic substances under UV (398 nm) and Vis (400–700 nm) radiation. For BiOCl and BiOBr, in addition to excitability, the light-induced oxygen vacancies are decisive in the activity. Although without organic substances, the BiOI efficiency highly exceeds that of BiOBr and BiOCl for PDS activation (for BiOI, 15–20%, while for BiOBr and BiOCl, only 3–4% of the PDS transformed); each BiOX catalyst showed enhanced activity for 1,4-hydroquinone (HQ) transformation due to the semiquinone radical-initiated PDS activation. For sulfamethoxypyridazine (SMP), the transformation is driven by direct charge transfer, and the effect of PDS was less manifested. BiOI proved efficient for transforming various organic substances even under Vis radiation. The efficiency was enhanced by PDS addition (HQ is wholly transformed within 20 min, and SMP conversion increased from 40% to 90%) without damaging the catalyst; its activity did change over three consecutive cycles. Results related to the well-adsorbed trimethoprim (TRIM) and application of biologically treated domestic wastewater as a matrix highlighted the limiting factors of the method and visible light active photocatalyst, BiOI.
Open AccessApplication of BiOX Photocatalyst to Activate Peroxydisulfate Ion-Investigation of a Combined Process for the Removal of Organic Pollutants from Water
The persulfate-based advanced oxidation processes employing heterogeneous photocatalysts to generate sulfate radicals (SO4•−) from peroxydisulfate ion (PDS, S2O82−) have been extensively investigated to remove organic pollutants. In this work, BiOX (X = Cl, Br, and I) photocatalysts were investigated to activate PDS and enhance the transformation rate of various organic substances under UV (398 nm) and Vis (400–700 nm) radiation. For BiOCl and BiOBr, in addition to excitability, the light-induced oxygen vacancies are decisive in the activity. Although without organic substances, the BiOI efficiency highly exceeds that of BiOBr and BiOCl for PDS activation (for BiOI, 15–20%, while for BiOBr and BiOCl, only 3–4% of the PDS transformed); each BiOX catalyst showed enhanced activity for 1,4-hydroquinone (HQ) transformation due to the semiquinone radical-initiated PDS activation. For sulfamethoxypyridazine (SMP), the transformation is driven by direct charge transfer, and the effect of PDS was less manifested. BiOI proved efficient for transforming various organic substances even under Vis radiation. The efficiency was enhanced by PDS addition (HQ is wholly transformed within 20 min, and SMP conversion increased from 40% to 90%) without damaging the catalyst; its activity did change over three consecutive cycles. Results related to the well-adsorbed trimethoprim (TRIM) and application of biologically treated domestic wastewater as a matrix highlighted the limiting factors of the method and visible light active photocatalyst, BiOI.
- Open Access
Wavelength Dependence of the Transformation Mechanism of Sulfonamides Using Different LED Light Sources and TiO2 and ZnO Photocatalysts
The comparison of the efficiency of the commercially available photocatalysts, TiO2 and ZnO, irradiated with 365 nm and 398 nm light, is presented for the removal of two antibiotics, sulfamethazine (SMT) and sulfamethoxypyridazine (SMP). The •OH formation rate was compared using coumarin, and higher efficiency was proved for TiO2 than ZnO, while for 1,4-benzoquinone in O2-free suspensions, the higher contribution of the photogenerated electrons to the conversion was observed for ZnO than TiO2, especially at 398 nm irradiation. An extremely fast transformation and high quantum yield of SMP in the TiO2/LED398nm process were observed. The transformation was fast in both O2 containing and O2-free suspensions and takes place via desulfonation, while in other cases, mainly hydroxylated products form. The effect of reaction parameters (methanol, dissolved O2 content, HCO3− and Cl−) confirmed that a quite rarely observed energy transfer between the excited state P25 and SMP might be responsible for this unique behavior. In our opinion, these results highlight that “non-conventional” mechanisms could occur even in the case of the well-known TiO2 photocatalyst, and the effect of wavelength is also worth investigating.
Open AccessWavelength Dependence of the Transformation Mechanism of Sulfonamides Using Different LED Light Sources and TiO2 and ZnO Photocatalysts
The comparison of the efficiency of the commercially available photocatalysts, TiO2 and ZnO, irradiated with 365 nm and 398 nm light, is presented for the removal of two antibiotics, sulfamethazine (SMT) and sulfamethoxypyridazine (SMP). The •OH formation rate was compared using coumarin, and higher efficiency was proved for TiO2 than ZnO, while for 1,4-benzoquinone in O2-free suspensions, the higher contribution of the photogenerated electrons to the conversion was observed for ZnO than TiO2, especially at 398 nm irradiation. An extremely fast transformation and high quantum yield of SMP in the TiO2/LED398nm process were observed. The transformation was fast in both O2 containing and O2-free suspensions and takes place via desulfonation, while in other cases, mainly hydroxylated products form. The effect of reaction parameters (methanol, dissolved O2 content, HCO3− and Cl−) confirmed that a quite rarely observed energy transfer between the excited state P25 and SMP might be responsible for this unique behavior. In our opinion, these results highlight that “non-conventional” mechanisms could occur even in the case of the well-known TiO2 photocatalyst, and the effect of wavelength is also worth investigating.
- Open Access
- 21 December 2021
- Published by MDPI AG in Nanomaterials
- Vol. 12 (1) , 5
Impact of Reaction Parameters and Water Matrices on the Removal of Organic Pollutants by TiO2/LED and ZnO/LED Heterogeneous Photocatalysis Using 365 and 398 nm Radiation
In this work, the application of high-power LED365nm and commercial, low-price LED398nm for heterogeneous photocatalysis with TiO2 and ZnO photocatalysts are studied and compared, focusing on the effect of light intensity, photon energy, quantum yield, electrical energy consumption, and effect of matrices and inorganic components on radical formation. Coumarin (COU) and its hydroxylated product (7-HC) were used to investigate operating parameters on the •OH formation rate. In addition to COU, two neonicotinoids, imidacloprid and thiacloprid, were also used to study the effect of various LEDs, matrices, and inorganic ions. The transformation of COU was slower for LED398nm than for LED365nm, but r07-HC/r0COU ratio was significantly higher for LED398nm. The COU mineralization rate was the same for both photocatalysts using LED365nm, but a significant difference was observed using LED398nm. The impact of matrices and their main inorganic components Cl− and HCO3− were significantly different for ZnO and TiO2. The negative effect of HCO3− was evident, however, in the case of high-power LED365nm and TiO2, and the formation of CO3•− almost doubled the r07-HC and contributes to the conversion of neonicotinoids by altering the product distribution and mineralization rate.
- 21 December 2021
- Published by MDPI AG in Nanomaterials
- Vol. 12 (1) , 5
Open AccessImpact of Reaction Parameters and Water Matrices on the Removal of Organic Pollutants by TiO2/LED and ZnO/LED Heterogeneous Photocatalysis Using 365 and 398 nm Radiation
In this work, the application of high-power LED365nm and commercial, low-price LED398nm for heterogeneous photocatalysis with TiO2 and ZnO photocatalysts are studied and compared, focusing on the effect of light intensity, photon energy, quantum yield, electrical energy consumption, and effect of matrices and inorganic components on radical formation. Coumarin (COU) and its hydroxylated product (7-HC) were used to investigate operating parameters on the •OH formation rate. In addition to COU, two neonicotinoids, imidacloprid and thiacloprid, were also used to study the effect of various LEDs, matrices, and inorganic ions. The transformation of COU was slower for LED398nm than for LED365nm, but r07-HC/r0COU ratio was significantly higher for LED398nm. The COU mineralization rate was the same for both photocatalysts using LED365nm, but a significant difference was observed using LED398nm. The impact of matrices and their main inorganic components Cl− and HCO3− were significantly different for ZnO and TiO2. The negative effect of HCO3− was evident, however, in the case of high-power LED365nm and TiO2, and the formation of CO3•− almost doubled the r07-HC and contributes to the conversion of neonicotinoids by altering the product distribution and mineralization rate.
- Open Access
- 15 January 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (1) , 215
Removal of Emerging Pollutants from Water Using Environmentally Friendly Processes: Photocatalysts Preparation, Characterization, Intermediates Identification and Toxicity Assessment
Pharmaceuticals and pesticides are emerging contaminants problematic in the aquatic environment because of their adverse effects on aquatic life and humans. In order to remove them from water, photocatalysis is one of the most modern technologies to be used. First, newly synthesized photocatalysts were successfully prepared using a sol–gel method and characterized by different techniques (XRD, FTIR, UV/Vis, BET and SEM/EDX). The photocatalytic properties of TiO2, ZnO and MgO nanoparticles were examined according to their removal from water for two antibiotics (ciprofloxacin and ceftriaxone) and two herbicides (tembotrione and fluroxypyr) exposed to UV/simulated sunlight (SS). TiO2 proved to be the most efficient nanopowder under UV and SS. Addition of (NH4)2S2O8 led to the faster removal of both antibiotics and herbicide fluroxypyr. The main intermediates were separated and identified for the herbicides and antibiotic ciprofloxacin. Finally, the toxicity of each emerging pollutant mixture and formed intermediates was assessed on wheat germination and biomass production.
- 15 January 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (1) , 215
Open AccessRemoval of Emerging Pollutants from Water Using Environmentally Friendly Processes: Photocatalysts Preparation, Characterization, Intermediates Identification and Toxicity Assessment
Pharmaceuticals and pesticides are emerging contaminants problematic in the aquatic environment because of their adverse effects on aquatic life and humans. In order to remove them from water, photocatalysis is one of the most modern technologies to be used. First, newly synthesized photocatalysts were successfully prepared using a sol–gel method and characterized by different techniques (XRD, FTIR, UV/Vis, BET and SEM/EDX). The photocatalytic properties of TiO2, ZnO and MgO nanoparticles were examined according to their removal from water for two antibiotics (ciprofloxacin and ceftriaxone) and two herbicides (tembotrione and fluroxypyr) exposed to UV/simulated sunlight (SS). TiO2 proved to be the most efficient nanopowder under UV and SS. Addition of (NH4)2S2O8 led to the faster removal of both antibiotics and herbicide fluroxypyr. The main intermediates were separated and identified for the herbicides and antibiotic ciprofloxacin. Finally, the toxicity of each emerging pollutant mixture and formed intermediates was assessed on wheat germination and biomass production.
- Open Access
- 13 August 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (8) , 1591
Potential of TiO2 with Various Au Nanoparticles for Catalyzing Mesotrione Removal from Wastewaters under Sunlight
Nowadays, great focus is given to the contamination of surface and groundwater because of the extensive usage of pesticides in agriculture. The improvements of commercial catalyst TiO2 activity using different Au nanoparticles were investigated for mesotrione photocatalytic degradation under simulated sunlight. The selected system was 2.43 × 10−3% Au–S–CH2–CH2–OH/TiO2 (0.5 g/L) that was studied by transmission electron microscopy and ultraviolet-visible (UV-Vis) spectroscopy. It was found that TiO2 particles size was ~20 nm and ~50 nm, respectively. The Au nanoparticles were below 10 nm and were well distributed within the framework of TiO2. For 2.43 × 10−3% Au–S–CH2–CH2–OH/TiO2 (0.5 g/L), band gap energy was 2.45 eV. In comparison to the pure TiO2, addition of Au nanoparticles generally enhanced photocatalytic removal of mesotrione. By examining the degree of mineralization, it was found that 2.43 × 10−3% Au–S–CH2–CH2–OH/TiO2 (0.5 g/L) system was the most efficient for the removal of the mesotrione and intermediates. The effect of tert-butanol, NaF and ethylenediaminetetraacetic acid disodium salt on the transformation rate suggested that the relative contribution of various reactive species changed in following order: h+ > ●OHads > ●OHbulk. Finally, several intermediates that were formed during the photocatalytic treatment of mesotrione were identified.
- 13 August 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (8) , 1591
Open AccessPotential of TiO2 with Various Au Nanoparticles for Catalyzing Mesotrione Removal from Wastewaters under Sunlight
Nowadays, great focus is given to the contamination of surface and groundwater because of the extensive usage of pesticides in agriculture. The improvements of commercial catalyst TiO2 activity using different Au nanoparticles were investigated for mesotrione photocatalytic degradation under simulated sunlight. The selected system was 2.43 × 10−3% Au–S–CH2–CH2–OH/TiO2 (0.5 g/L) that was studied by transmission electron microscopy and ultraviolet-visible (UV-Vis) spectroscopy. It was found that TiO2 particles size was ~20 nm and ~50 nm, respectively. The Au nanoparticles were below 10 nm and were well distributed within the framework of TiO2. For 2.43 × 10−3% Au–S–CH2–CH2–OH/TiO2 (0.5 g/L), band gap energy was 2.45 eV. In comparison to the pure TiO2, addition of Au nanoparticles generally enhanced photocatalytic removal of mesotrione. By examining the degree of mineralization, it was found that 2.43 × 10−3% Au–S–CH2–CH2–OH/TiO2 (0.5 g/L) system was the most efficient for the removal of the mesotrione and intermediates. The effect of tert-butanol, NaF and ethylenediaminetetraacetic acid disodium salt on the transformation rate suggested that the relative contribution of various reactive species changed in following order: h+ > ●OHads > ●OHbulk. Finally, several intermediates that were formed during the photocatalytic treatment of mesotrione were identified.
- 13 June 2019
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 26 (23) , 23268-23278
Transformation of atrazine by photolysis and radiolysis: kinetic parameters, intermediates and economic consideration
Four techniques, UV254 nm photolysis, vacuum ultraviolet (VUV172 nm) photolysis, combined UV254 nm/VUV185 nm photolysis and gamma (γ) radiolysis were used to induce the transformation of atrazine in aqueous solution. The effects of dissolved oxygen (atrazine concentration 1 × 10−4 mol L−1 and 4.6 × 10−7 mol L−1) and matrix (high purity water/purified wastewater, atrazine concentration 4.6 × 10−7 mol L−1) and the electric energy requirements were investigated. The calculation of the energy input in cases of the photolyses was based on the lamp’s power. In radiolysis, the absorbed dose (J kg−1) was the basis. In UV photolysis, atrazine transforms to atrazine-2-hydroxy; this product practically does not degrade during UV photolysis; due to this reason, the mineralisation is very slow. This and some other products of atrazine decomposition degrade only in radical reactions. Dissolved oxygen usually slightly enhances the degradation rate. At 10−7 mol L−1 concentration level, the matrix, high purity water/purified wastewater, has not much influence on the degradation rates in UV photolysis and radiolysis. In the VUV and UV/VUV systems, considerable matrix effects were observed. Comparing the electric energy requirements of the four degradation processes, radiolysis was found to be the economically most feasible method, requiring 1–2 orders of magnitude less electric energy than UV/VUV, VUV and UV photolysis.
- 13 June 2019
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 26 (23) , 23268-23278
Transformation of atrazine by photolysis and radiolysis: kinetic parameters, intermediates and economic consideration
Four techniques, UV254 nm photolysis, vacuum ultraviolet (VUV172 nm) photolysis, combined UV254 nm/VUV185 nm photolysis and gamma (γ) radiolysis were used to induce the transformation of atrazine in aqueous solution. The effects of dissolved oxygen (atrazine concentration 1 × 10−4 mol L−1 and 4.6 × 10−7 mol L−1) and matrix (high purity water/purified wastewater, atrazine concentration 4.6 × 10−7 mol L−1) and the electric energy requirements were investigated. The calculation of the energy input in cases of the photolyses was based on the lamp’s power. In radiolysis, the absorbed dose (J kg−1) was the basis. In UV photolysis, atrazine transforms to atrazine-2-hydroxy; this product practically does not degrade during UV photolysis; due to this reason, the mineralisation is very slow. This and some other products of atrazine decomposition degrade only in radical reactions. Dissolved oxygen usually slightly enhances the degradation rate. At 10−7 mol L−1 concentration level, the matrix, high purity water/purified wastewater, has not much influence on the degradation rates in UV photolysis and radiolysis. In the VUV and UV/VUV systems, considerable matrix effects were observed. Comparing the electric energy requirements of the four degradation processes, radiolysis was found to be the economically most feasible method, requiring 1–2 orders of magnitude less electric energy than UV/VUV, VUV and UV photolysis.
- Open Access
- 3 August 2018
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Water Research & Technology
- Vol. 4 (9) , 1345-1360
Comparison of advanced oxidation processes in the decomposition of diuron and monuron – efficiency, intermediates, electrical energy per order and the effect of various matrices
The decomposition of diuron and monuron, widely used phenylurea pesticides, via UV-induced photolysis (UV254nm), ozonation (O3), their combination (UV254nm/O3) and heterogeneous photocatalysis (TiO2/UV) were investigated and compared. The UV254nm/O3 and TiO2/UV methods proved to be effective from the aspects of both the transformation and the mineralization. The transformation rates changed in the order: O3 ≪ TiO2/UV < UV254nm < UV254nm/O3. Comparing the electric energy per order (Ec EO) values calculated for the transformation, the most efficient method was UV254nm/O3. However, the lowest ETOC EO value calculated for the mineralization was obtained using TiO2/UV. Identification of the aromatic intermediates revealed that the first step in the decomposition involves transformation of the aliphatic chain, in parallel with dechlorination and hydroxylation of the aromatic ring. The amount and quality of the intermediates formed depends strongly on the method applied. Matrices such as natural waters (from the River Tisza and thermal water from Kistelek) and inorganic salts exert significant effect on the transformation rates only in the case of TiO2/UV. Humic acids behave as “light filter” and consequently decrease the rate of photoinitiated transformation using UV254nm and UV254nm/O3 methods, whereas they slightly enhance the effect of ozonation, most likely because humic acids and/or their intermediates promote the decomposition of ozone and increase the radical concentration. Regarding this parameter, the most sensitive method was heterogeneous photocatalysis, most likely because the well adsorbed humic acid strongly inhibits the formation of hydroxyl radical.
- 3 August 2018
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Water Research & Technology
- Vol. 4 (9) , 1345-1360
Open AccessComparison of advanced oxidation processes in the decomposition of diuron and monuron – efficiency, intermediates, electrical energy per order and the effect of various matrices
The decomposition of diuron and monuron, widely used phenylurea pesticides, via UV-induced photolysis (UV254nm), ozonation (O3), their combination (UV254nm/O3) and heterogeneous photocatalysis (TiO2/UV) were investigated and compared. The UV254nm/O3 and TiO2/UV methods proved to be effective from the aspects of both the transformation and the mineralization. The transformation rates changed in the order: O3 ≪ TiO2/UV < UV254nm < UV254nm/O3. Comparing the electric energy per order (Ec EO) values calculated for the transformation, the most efficient method was UV254nm/O3. However, the lowest ETOC EO value calculated for the mineralization was obtained using TiO2/UV. Identification of the aromatic intermediates revealed that the first step in the decomposition involves transformation of the aliphatic chain, in parallel with dechlorination and hydroxylation of the aromatic ring. The amount and quality of the intermediates formed depends strongly on the method applied. Matrices such as natural waters (from the River Tisza and thermal water from Kistelek) and inorganic salts exert significant effect on the transformation rates only in the case of TiO2/UV. Humic acids behave as “light filter” and consequently decrease the rate of photoinitiated transformation using UV254nm and UV254nm/O3 methods, whereas they slightly enhance the effect of ozonation, most likely because humic acids and/or their intermediates promote the decomposition of ozone and increase the radical concentration. Regarding this parameter, the most sensitive method was heterogeneous photocatalysis, most likely because the well adsorbed humic acid strongly inhibits the formation of hydroxyl radical.