DADiego Hayashi Alonso

Diego Hayashi Alonso

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Diego Hayashi Alonso has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Topology optimisation of transient turbulent compressible flow

    by Diego Hayashi Alonso, Patrick E. Farrell, Julio R. Meneghini, Emilio Carlos Nelli Silva

    Purpose: The purpose of this paper is to present the first topology optimisation formulation for transient turbulent compressible flow modelled with the unsteady Favre-averaged Navier–Stokes equations. Design/methodology/approach: The topology to be designed is incorporated in each of the momentum balance, the energy balance and the turbulence closure. The forward and adjoint equations are implemented with different discretisations: the forward model with a finite volume method and the adjoint model with a discontinuous Galerkin finite element scheme, since the former is very robust and the latter can be adjoined automatically. Once discretised, the topology optimisation problem is solved with an integer linear programming algorithm. The authors demonstrate the capability of the approach in the design of a U-bend, a pipe joint and a double pipe joint. Findings: The formulation is developed and demonstrated through numerical examples, showcasing the developed approach. Originality/value: No previous topology optimisation formulation was available for transient turbulent compressible flow modelled with the unsteady Favre-averaged Navier–Stokes equations.


  • Open Access

    Unsteady topology optimisation for suppression of vortex-dominated compressible flows

    by Icaro A. Carvalho, Diego H. Alonso, Luis F. Garcia Rodriguez, Emílio C.N. Silva


  • Topology optimization for supercritical fluids in multi-reference frames

    by Luis Fernando Garcia Rodriguez, Diego Hayashi Alonso, Emilio Carlos Nelli Silva

    Supercritical gases can be efficiently transported due to their high density and low viscosity; however, their modeling is typically based on tabulated thermodynamic data that are non-differentiable, making them unsuitable for gradient-based optimization. This research proposes a novel topology optimization framework tailored for compressible supercritical fluid flows. The framework combines a multiple reference frame formulation for steady-state treatment of rotor–stator interactions, a compressible adjoint-based optimization scheme enhanced with automatic differentiation, and a polynomial-based thermodynamic model valid over predefined ranges of temperature and pressure, thereby avoiding reliance on non-differentiable thermodynamic tables. This formulation enables efficient gradient computation while supporting multi-objective optimization, balancing competing factors such as energy dissipation and vorticity generation. The method is applied to the optimization of a rotor–stator device operating with supercritical carbon dioxide, and several tests are conducted to demonstrate the framework's ability to generate innovative geometries and adapt to varying operational conditions, including different flow rates and rotational speeds. The effect of volume fraction is characterized in the rotor–stator optimization, showing its sensitivity in influencing blade size. Furthermore, the results demonstrate how relying on the vorticity-based objective function introduces suitable modifications to the initial design, while the energy dissipation objective promotes the formation of connected blades that generate more efficient flow passages. This work establishes a computationally feasible and versatile approach for advancing the design of efficient supercritical fluid systems.

  • Topology optimisation of transient compressible flow

    by Diego Hayashi Alonso, Patrick E. Farrell, Julio Romano Meneghini, Emílio Carlos Nelli Silva


  • Topology optimization of external compressible flow

    by I. A. Carvalho, D. H. Alonso, L. F. Garcia Rodriguez, F. S. Maffei, E. C. N. Silva

    The problem of an immersed body interacting with the surrounding fluid flow belongs to the category of external flows, wherein, despite the importance of a plethora of applications, previous papers have only undertaken incompressible or inviscid compressible flows. This is the first topology optimization work for viscous compressible external flows. Topology optimization is hereby employed to distribute solid and fluid to feature designs that are free from shape restrictions and independent of the initial guess. Fluid-flow governing equations are solved numerically, and sensitivities are obtained by automatic differentiation. Energy dissipation, vorticity, lift, and drag forces are considered and combined into five different objective functions, with a prescribed upper bound on the fluid volume and a drag constraint. Flow-physics considerations are given to advance the understanding of topology optimization for maximization of lift forces and minimization of drag, and limitations are highlighted on the use of vorticity as an objective function, linked to boundary-layer physics. Among our findings, intricately-curved, sharp-edged, and non-intuitive designs are produced, and the resulting flows exhibit superior behavior in most instances when contrasted with a renowned airfoil. In a particular case, a topology reminiscent of a well-known airfoil structure emerges from the application of our method—called “Gurney flap,” capable of maximizing lift and minimizing drag—previously inspected through trial-and-error approaches and physical intuition, rather than systematically generated through topology optimization, as is revealed here.


  • Topology optimization of an axial non-Newtonian pump-type device based on a 2D frozen rotor concept

    by Diego Hayashi Alonso, Renato Picelli, Julio Romano Meneghini, Emílio Carlos Nelli Silva

  • Experimental setup for labyrinth seals: Pressure, temperature, mass flow rate, rotation velocity, and pressure drop simultaneous measurement

    by L. N. B. S. Ribeiro, A. D. Freire, G. P. S. Barros, F. S. Maffei, A. S. C. Azevêdo, L. O. Siqueira, D. H. Alonso, R. Picelli, I. F. Machado, L. F. N. de Sá, et al.

    Labyrinth seals (LSs) in turbomachinery are used to minimize leaks. This study presents an experimental setup designed to test and validate LS designs. The test bench (TB) described in this paper can evaluate different LS designs obtained through various methods to find better solutions to mitigate greenhouse gas (GHG) emissions. Prototypes with conventional geometry, such as straight-through and interlaced LSs, are initially implemented and tested. A measurement procedure and experimental methodology for collecting leakage data are defined. The experimental methodology includes a measurement TB that supports a pressure difference of up to 5 bar. The leakage rate is measured in g/s using instrumentation that corrects the mass flow rate based on pressure and temperature measurements. The experimental results are compared to the Computational Fluid Dynamics results. Thus, the setup given in this article is a new and versatile TB setup focused on leakage measurement, which allows being used for analyzing various types of LS (with or without rotor structures) and is effective for evaluating the performance of LSs, helping the development of new LS geometries that can reduce GHG emissions.


  • Turbulence effects in the topology optimization of compressible subsonic flow

    by Luis Fernando Garcia‐Rodriguez, Diego Hayashi Alonso, Emilio Carlos Nelli Silva

    Turbulence significantly influences fluid flow topology optimization, and this has already been verified under the incompressible flow regime. However, the same cannot be said about the compressible flow regime, in which the density field now affects and couples all of the fluid flow and turbulence equations and makes obtaining the adjoint model, which is necessary for topology optimization, extremely difficult. Up to now, the turbulence phenomenon has still not been considered in compressible flow topology optimization, which is what is being proposed and analyzed here. Rather than being based in the Reynolds‐Averaged Navier–Stokes (RANS) equations which are defined only for incompressible flow, the equations are now based on the Favre‐Averaged Navier–Stokes (FANS) equations, which are the counterpart of the RANS equations for compressible flow and feature different dependencies and terms. The compressible turbulence model being considered is the compressible version of the Spalart–Allmaras model, which differs from the usual Spalart–Allmaras model, since now there are some new spatially varying density and specific heat terms that depend on the primal variables and that act over some of the turbulence terms of the overall model. The adjoint equations are obtained by using an automatic differentiation scheme through a coupled software platform. The optimization algorithm is IPOPT, and some examples are presented to show the effect of turbulence in the compressible flow topology optimization.


  • Topology optimization for flow machine rotor design considering resonance and low mass density flows

    by Diego Hayashi Alonso, Renato Picelli, Julio Romano Meneghini, Emílio Carlos Nelli Silva