Maurits Ortmanns
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Maurits Ortmanns has a total of 138 co-authors. Here are the top co-authors by number of shared publications:
- Joachim Becker
Institute of Microelectronics, University of Ulm, Ulm, Germany
16 shared publications - Jens Anders
University of Stuttgart
12 shared publications - John G. Kauffman
Institute of Microelectronics, University of Ulm, Ulm, Germany
11 shared publications - Markus Sporer
Institute of Microelectronics, University of Ulm, Ulm, Germany
9 shared publications - Patrick Vogelmann
Institute of Microelectronics, Ulm University, 89081 Ulm, Germany
8 shared publications - Johannes Wagner
Institute of Microelectronics, University of Ulm, Ulm, Germany
7 shared publications
Latest Publications
- Open Access
- 25 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. PP (00189200) , 1-13
An Eye-Opening Arbiter PUF With Auto-Error Detection and PVT-Robust Masking Achieving a BER of 2e -8
A hybrid ring oscillator (RO)/ arbiter physical unclonable function (PUF) is implemented in a 28-nm CMOS, where two competing ROs accumulate a sufficiently large phase difference exceeding a predefined deadzone (DZ). The resulting eye-opening arbiter (EOA) architecture enables a prediction of PUF bit stability over temperature change (from −40 °C to $125~^{\circ }$ C), supply voltage variation (±10%), and four-year accelerated aging based on a single point measurement at the initial PUFs usage. This once-a-lifetime initialization at nominal conditions generates a blanking mask without disclosing secret PUF information, off-chip or even outside the PUF cells. The EOA architecture additionally features an inherent multi-purpose auto-error detection (AE-Detection), which allows to assess the reliability of every generated PUF bit at every PUF bit readout. Using AE-detection and masking, a bit error rate (BER) of $2 \times 10^{-8}$ over 16 measured devices and a total of $200 \times 10^{6}$ measured bits over environmental changes and aging could be measured. The PUF operates with 0.259 pJ/bit, generates PUF bits with 4.515-Gbit/s bit-rate and only requires $34.84~\mu \text {m}^{2}$ per bit, including all masking and stabilization circuitry, to ensure the low BER PUF performance.
- 25 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. PP (00189200) , 1-13
Open AccessAn Eye-Opening Arbiter PUF With Auto-Error Detection and PVT-Robust Masking Achieving a BER of 2e -8
A hybrid ring oscillator (RO)/ arbiter physical unclonable function (PUF) is implemented in a 28-nm CMOS, where two competing ROs accumulate a sufficiently large phase difference exceeding a predefined deadzone (DZ). The resulting eye-opening arbiter (EOA) architecture enables a prediction of PUF bit stability over temperature change (from −40 °C to $125~^{\circ }$ C), supply voltage variation (±10%), and four-year accelerated aging based on a single point measurement at the initial PUFs usage. This once-a-lifetime initialization at nominal conditions generates a blanking mask without disclosing secret PUF information, off-chip or even outside the PUF cells. The EOA architecture additionally features an inherent multi-purpose auto-error detection (AE-Detection), which allows to assess the reliability of every generated PUF bit at every PUF bit readout. Using AE-detection and masking, a bit error rate (BER) of $2 \times 10^{-8}$ over 16 measured devices and a total of $200 \times 10^{6}$ measured bits over environmental changes and aging could be measured. The PUF operates with 0.259 pJ/bit, generates PUF bits with 4.515-Gbit/s bit-rate and only requires $34.84~\mu \text {m}^{2}$ per bit, including all masking and stabilization circuitry, to ensure the low BER PUF performance.
- 3 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Magazine
- Vol. 1 (1) , 25-26
A Mixed-Signal I-D-TIA With Direct Digitization [Technical Note]
Emerging sensing techniques impose strict requirements on the analog frontend regarding noise, bandwidth (BW), scalability, etc. For example, in nanopore-based DNA sequencing, two buffer solutions are separated by a membrane with a nanometer-sized pore. As molecules pass through the pore, they change the ionic current, producing a very small signal (MHz) is required in the sensing circuit [1]. Another example is scanning ion conductance microscopy, where a pipettewith an opening of a fewhundred nanometers is scanned over a small object (e.g., a cell or bacterium). The ionic current (hundres of pA) through the pipette varies with the object’s distance, thus a topographical image can be generated. To achieve high scan rates, a large BW(>100kHz) is required in the analog sensing front-end [2].
- 3 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Magazine
- Vol. 1 (1) , 25-26
A Mixed-Signal I-D-TIA With Direct Digitization [Technical Note]
Emerging sensing techniques impose strict requirements on the analog frontend regarding noise, bandwidth (BW), scalability, etc. For example, in nanopore-based DNA sequencing, two buffer solutions are separated by a membrane with a nanometer-sized pore. As molecules pass through the pore, they change the ionic current, producing a very small signal (MHz) is required in the sensing circuit [1]. Another example is scanning ion conductance microscopy, where a pipettewith an opening of a fewhundred nanometers is scanned over a small object (e.g., a cell or bacterium). The ionic current (hundres of pA) through the pipette varies with the object’s distance, thus a topographical image can be generated. To achieve high scan rates, a large BW(>100kHz) is required in the analog sensing front-end [2].
- 20 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Magazine
- Vol. 18 (1) , 126-128
The 2025 51st IEEE European Solid-State Electronics Research Conference [Conference Reports]
Provides society information that may include news, reviews or technical notes that should be of interest to practitioners and researchers.
- 20 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Magazine
- Vol. 18 (1) , 126-128
The 2025 51st IEEE European Solid-State Electronics Research Conference [Conference Reports]
Provides society information that may include news, reviews or technical notes that should be of interest to practitioners and researchers.
- Open Access
- 31 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. PP (00189200) , 1-13
An 80 MHz CT DSM With SMASH DAC Achieving 106.2 dB SFDR Without Linearity Calibration
Multi-bit quantization allows Delta-Sigma modulators to achieve low oversampling ratios (OSRs), improved jitter tolerance, and relaxed dynamic requirements of the loop filter, but face nonlinearity challenges in the feedback digital-to-analog converter (DAC), requiring complex calibration techniques. Dual quantization using digital DSM (DDSM) has been proposed to overcome this limitation, but state-of-the art DDSM suffers from limited resolution, stability concerns, and digital-analog matching requirements. This work applies a sturdy multistage noise shaping (SMASH) DDSM feedback DAC within a wideband DSM to address these issues. This results in low element mismatch sensitivity, eliminating the need for any DAC calibration. To reduce the effect of dynamic errors in the outer DAC, an inter-symbol-interference (ISI) shuffler is proposed and gain boosting is applied within the DAC elements to address memory effects due to parasitic capacitance. The DSM allows an excess loop-delay (ELD) $= 1.5\times T_{s}$ in the outermost feedback path to give enough processing time for the SMASH DDSM. The prototype implementation of the 3rd-order continuous-time (CT) DSM shows a 106.2dB spurious-free dynamic range (SFDR) in an 80MHz bandwidth without any DAC calibration. Using reference folding and shuffling in the internal Flash quantizer, the DSM is clocked at 2.75 GHz. Implemented in 28 nm CMOS, CT DSM achieves a competitive figure-of-merit (FOM) = 163.7dB for such extreme linearity.
- 31 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. PP (00189200) , 1-13
Open AccessAn 80 MHz CT DSM With SMASH DAC Achieving 106.2 dB SFDR Without Linearity Calibration
Multi-bit quantization allows Delta-Sigma modulators to achieve low oversampling ratios (OSRs), improved jitter tolerance, and relaxed dynamic requirements of the loop filter, but face nonlinearity challenges in the feedback digital-to-analog converter (DAC), requiring complex calibration techniques. Dual quantization using digital DSM (DDSM) has been proposed to overcome this limitation, but state-of-the art DDSM suffers from limited resolution, stability concerns, and digital-analog matching requirements. This work applies a sturdy multistage noise shaping (SMASH) DDSM feedback DAC within a wideband DSM to address these issues. This results in low element mismatch sensitivity, eliminating the need for any DAC calibration. To reduce the effect of dynamic errors in the outer DAC, an inter-symbol-interference (ISI) shuffler is proposed and gain boosting is applied within the DAC elements to address memory effects due to parasitic capacitance. The DSM allows an excess loop-delay (ELD) $= 1.5\times T_{s}$ in the outermost feedback path to give enough processing time for the SMASH DDSM. The prototype implementation of the 3rd-order continuous-time (CT) DSM shows a 106.2dB spurious-free dynamic range (SFDR) in an 80MHz bandwidth without any DAC calibration. Using reference folding and shuffling in the internal Flash quantizer, the DSM is clocked at 2.75 GHz. Implemented in 28 nm CMOS, CT DSM achieves a competitive figure-of-merit (FOM) = 163.7dB for such extreme linearity.
- 14 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (6) , 2919-2932
A Digitizing Integrator–Differentiator TIA With 1-MHz Bandwidth and 93-pA rms Sensitivity in 28-nm CMOS
This article presents a low-noise, wideband, and direct-digitizing current sensing analog frontend based on a mixed-signal integrator–differentiator transimpedance amplifier (MS-TIA). Previous state of the art (SoA) implementations of low-noise and wideband current sensing analog frontends relied on analog amplifiers with large passive components. Furthermore, an analog-to-digital converter (ADC) is often not included in SoA designs. In the presented MS-TIA, an ADC is included in the signal chain, and most of the signal processing tasks are performed in the digital domain, thus benefiting from the use of an advanced process node. The presented MS-TIA was fabricated in 28-nm CMOS with an active area of 0.13 mm2. It achieves 93-pArms sensitivity in a 1-MHz bandwidth (BW), with a minimum input-referred current spot noise of 30 fA/$\sqrt{}$ Hz. It consumes 8.5 mW from a single 0.9-V supply. The ac transimpedance was measured over a temperature range from$- 40~^{\circ } $ C to$120~^{\circ } $ C and shows only minor variation, with a temperature coefficient of only −100 ppm/K over the entire temperature range.- 14 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (6) , 2919-2932
A Digitizing Integrator–Differentiator TIA With 1-MHz Bandwidth and 93-pA rms Sensitivity in 28-nm CMOS
This article presents a low-noise, wideband, and direct-digitizing current sensing analog frontend based on a mixed-signal integrator–differentiator transimpedance amplifier (MS-TIA). Previous state of the art (SoA) implementations of low-noise and wideband current sensing analog frontends relied on analog amplifiers with large passive components. Furthermore, an analog-to-digital converter (ADC) is often not included in SoA designs. In the presented MS-TIA, an ADC is included in the signal chain, and most of the signal processing tasks are performed in the digital domain, thus benefiting from the use of an advanced process node. The presented MS-TIA was fabricated in 28-nm CMOS with an active area of 0.13 mm2. It achieves 93-pArms sensitivity in a 1-MHz bandwidth (BW), with a minimum input-referred current spot noise of 30 fA/$\sqrt{}$ Hz. It consumes 8.5 mW from a single 0.9-V supply. The ac transimpedance was measured over a temperature range from$- 40~^{\circ } $ C to$120~^{\circ } $ C and shows only minor variation, with a temperature coefficient of only −100 ppm/K over the entire temperature range.- Open Access
- 5 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Circuits and Systems
- Vol. 6, 424-431
Performance Prediction of Incremental ΔΣ ADCs
Incremental Delta-Sigma (I-DS) analog-to-digital converters (ADCs) are widely utilized in applications requiring high-resolution Nyquist conversion. Accurate performance prediction of these converters is crucial for efficient design and optimization. Existing state of the art (SoA) equations are either lacking sufficient accuracy or simplicity in predicting quantization noise performance under various architectural scenarios. This paper reviews the derivation and limitations of existing performance prediction models. A more general and accurate analysis is derived for predicting the performance of I-DS ADCs, addressing the shortcomings of the conventional approaches. The validity of the proposed performance prediction is rigorously evaluated through extensive simulations across a broad range of architectural choices. The results establish the new model as a robust tool for predicting the performance of I-DS ADCs, advancing the SoA, and facilitating more effective design strategies in the field.
- 5 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Circuits and Systems
- Vol. 6, 424-431
Open AccessPerformance Prediction of Incremental ΔΣ ADCs
Incremental Delta-Sigma (I-DS) analog-to-digital converters (ADCs) are widely utilized in applications requiring high-resolution Nyquist conversion. Accurate performance prediction of these converters is crucial for efficient design and optimization. Existing state of the art (SoA) equations are either lacking sufficient accuracy or simplicity in predicting quantization noise performance under various architectural scenarios. This paper reviews the derivation and limitations of existing performance prediction models. A more general and accurate analysis is derived for predicting the performance of I-DS ADCs, addressing the shortcomings of the conventional approaches. The validity of the proposed performance prediction is rigorously evaluated through extensive simulations across a broad range of architectural choices. The results establish the new model as a robust tool for predicting the performance of I-DS ADCs, advancing the SoA, and facilitating more effective design strategies in the field.
- Open Access
Dextr: Zero-Shot Neural Architecture Search with Singular Value Decomposition and Extrinsic Curvature
Zero-shot Neural Architecture Search (NAS) typically optimises the architecture search process by exploiting the network or gradient properties at initialisation through zero-cost proxies. The existing proxies often rely on labelled data, which is usually unavailable in real-world settings. Furthermore, the majority of the current methods focus either on optimising the convergence and generalisation attributes or solely on the expressivity of the network architectures. To address both limitations, we first demonstrate how channel collinearity affects the convergence and generalisation properties of a neural network. Then, by incorporating the convergence, generalisation and expressivity in one approach, we propose a zero-cost proxy that omits the requirement of labelled data for its computation. In particular, we leverage the Singular Value Decomposition (SVD) of the neural network layer features and the extrinsic curvature of the network output to design our proxy. %As a result, the proposed proxy is formulated as the simplified harmonic mean of the logarithms of two key components: the sum of the inverse of the feature condition number and the extrinsic curvature of the network output. Our approach enables accurate prediction of network performance on test data using only a single label-free data sample. Our extensive evaluation includes a total of six experiments, including the Convolutional Neural Network (CNN) search space, i.e. DARTS and the Transformer search space, i.e. AutoFormer. The proposed proxy demonstrates a superior performance on multiple correlation benchmarks, including NAS-Bench-101, NAS-Bench-201, and TransNAS-Bench-101-micro; as well as on the NAS task within the DARTS and the AutoFormer search space, all while being notably efficient. The code is available at https://github.com/rohanasthana/Dextr.
Open AccessDextr: Zero-Shot Neural Architecture Search with Singular Value Decomposition and Extrinsic Curvature
Zero-shot Neural Architecture Search (NAS) typically optimises the architecture search process by exploiting the network or gradient properties at initialisation through zero-cost proxies. The existing proxies often rely on labelled data, which is usually unavailable in real-world settings. Furthermore, the majority of the current methods focus either on optimising the convergence and generalisation attributes or solely on the expressivity of the network architectures. To address both limitations, we first demonstrate how channel collinearity affects the convergence and generalisation properties of a neural network. Then, by incorporating the convergence, generalisation and expressivity in one approach, we propose a zero-cost proxy that omits the requirement of labelled data for its computation. In particular, we leverage the Singular Value Decomposition (SVD) of the neural network layer features and the extrinsic curvature of the network output to design our proxy. %As a result, the proposed proxy is formulated as the simplified harmonic mean of the logarithms of two key components: the sum of the inverse of the feature condition number and the extrinsic curvature of the network output. Our approach enables accurate prediction of network performance on test data using only a single label-free data sample. Our extensive evaluation includes a total of six experiments, including the Convolutional Neural Network (CNN) search space, i.e. DARTS and the Transformer search space, i.e. AutoFormer. The proposed proxy demonstrates a superior performance on multiple correlation benchmarks, including NAS-Bench-101, NAS-Bench-201, and TransNAS-Bench-101-micro; as well as on the NAS task within the DARTS and the AutoFormer search space, all while being notably efficient. The code is available at https://github.com/rohanasthana/Dextr.
- 13 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 73 (4) , 2320-2331
Analysis and Design of a Pipelined MASH Continuous-Time Delta-Sigma Modulator With 15.4 MHz-BW and 82.6 dB-SNDR
This paper presents the design of a wideband pipelined multi-stage noise shaping (MASH) continuous time (CT) delta-sigma modulator (DSM). The quantization error of the overall $1^{\mathrm {st}}$ -stage DSM is extracted as the input of the $2^{\mathrm {nd}}$ stage, while the outputs of both stages are simply combined without using any digital filters. Overall, different shaping functions are generated for both QN without requiring any digital QN cancellation. Therefore, the pipelined MASH (PMASH) significantly mitigates QN leakage while retaining the decent loop stability of a traditional MASH. Additionally, several analyses have been made for the PMASH topology, e.g. the design guideline, the signal transfer function (STF), the robustness, etc. Clocked at 800MHz and enabling on-chip DAC calibration, the 65nm CMOS prototype with an exemplary 2-2 topology using multi-bit quantizers achieves 82.6 dB SNDR, 98.8 dB SFDR over 15.4 MHz BW at −0.5 dBFS 1.8 MHz input. The power consumption is 16.9 mW with 1.2V/1.5V supplies. It results in a competitive FoM ${}_{\mathrm {S\vert SNDR}}$ of 172.2 dB, while it avoids any off-chip calibrations.
- 13 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 73 (4) , 2320-2331
Analysis and Design of a Pipelined MASH Continuous-Time Delta-Sigma Modulator With 15.4 MHz-BW and 82.6 dB-SNDR
This paper presents the design of a wideband pipelined multi-stage noise shaping (MASH) continuous time (CT) delta-sigma modulator (DSM). The quantization error of the overall $1^{\mathrm {st}}$ -stage DSM is extracted as the input of the $2^{\mathrm {nd}}$ stage, while the outputs of both stages are simply combined without using any digital filters. Overall, different shaping functions are generated for both QN without requiring any digital QN cancellation. Therefore, the pipelined MASH (PMASH) significantly mitigates QN leakage while retaining the decent loop stability of a traditional MASH. Additionally, several analyses have been made for the PMASH topology, e.g. the design guideline, the signal transfer function (STF), the robustness, etc. Clocked at 800MHz and enabling on-chip DAC calibration, the 65nm CMOS prototype with an exemplary 2-2 topology using multi-bit quantizers achieves 82.6 dB SNDR, 98.8 dB SFDR over 15.4 MHz BW at −0.5 dBFS 1.8 MHz input. The power consumption is 16.9 mW with 1.2V/1.5V supplies. It results in a competitive FoM ${}_{\mathrm {S\vert SNDR}}$ of 172.2 dB, while it avoids any off-chip calibrations.
- Open Access
- 1 July 2025
- Published by MDPI AG in Cryptography
- Vol. 9 (3) , 47
The Eye-Opening Arbiter-PUF FPGA Implementation with Auto Error Detection
We present the first implementation of an FPGA-based PUF that leverages the usually contradictory requirements of stability and response time. Many state-of-the-art implementations of PUFs are either slow with a low error rate, like the ring oscillator-PUF, or fast with a higher error rate, like the arbiter-PUF. The presented implementation of an eye-opening PUF uses the phase-integrating effect of a ring oscillator to realize the shortest possible response for the required stability of the readout. This principle also allows for new automatic detection of unstable bits based on counting the number of oscillations required until an arbitration is conducted. This first implementation of an eye-opening PUF reduces the bit error rate to a number under our measurement limits, while the readout time is simultaneously kept as low as ≤1.54 μs, with an average of 0.85 μs. In addition, environmental temperature changes are evaluated, and methods for limiting these effects are discussed.
- 1 July 2025
- Published by MDPI AG in Cryptography
- Vol. 9 (3) , 47
Open AccessThe Eye-Opening Arbiter-PUF FPGA Implementation with Auto Error Detection
We present the first implementation of an FPGA-based PUF that leverages the usually contradictory requirements of stability and response time. Many state-of-the-art implementations of PUFs are either slow with a low error rate, like the ring oscillator-PUF, or fast with a higher error rate, like the arbiter-PUF. The presented implementation of an eye-opening PUF uses the phase-integrating effect of a ring oscillator to realize the shortest possible response for the required stability of the readout. This principle also allows for new automatic detection of unstable bits based on counting the number of oscillations required until an arbitration is conducted. This first implementation of an eye-opening PUF reduces the bit error rate to a number under our measurement limits, while the readout time is simultaneously kept as low as ≤1.54 μs, with an average of 0.85 μs. In addition, environmental temperature changes are evaluated, and methods for limiting these effects are discussed.
- 4 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (11) , 4059-4072
A 470- μ W, 102.6-dB DR, 20-kHz BW Calibration-Free ΔΣ Modulator With SFDR in Excess of 110 dBc Using an Intrinsically Linear 13-Level DAC
This article presents the first true multi-bit () to achieve a () in excess of 110 dBc without the need for () or calibration. This high linearity is obtained by employing a 13-level intrinsically linear () where capacitor and reference voltage mismatches are only second-order sources of non-linearity. The linearity performance is validated across multiple samples and over supply voltage and temperature variation. The prototype achieves a () of 102.6 dB and a () of 100.7 dB in a 20-kHz (), consuming 470 μW from a 1.8 V supply including on-chip reference generation and buffers, and resulting in a Schreier () of 178.9 dB.
- 4 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (11) , 4059-4072
A 470- μ W, 102.6-dB DR, 20-kHz BW Calibration-Free ΔΣ Modulator With SFDR in Excess of 110 dBc Using an Intrinsically Linear 13-Level DAC
This article presents the first true multi-bit () to achieve a () in excess of 110 dBc without the need for () or calibration. This high linearity is obtained by employing a 13-level intrinsically linear () where capacitor and reference voltage mismatches are only second-order sources of non-linearity. The linearity performance is validated across multiple samples and over supply voltage and temperature variation. The prototype achieves a () of 102.6 dB and a () of 100.7 dB in a 20-kHz (), consuming 470 μW from a 1.8 V supply including on-chip reference generation and buffers, and resulting in a Schreier () of 178.9 dB.