Lu Jie
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Lu Jie has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
- Nan Sun
Tsinghua University
13 shared publications - Yi Zhong
Tsinghua University
8 shared publications - Michael P. Flynn
University of Michigan
7 shared publications - Mingyang Gu
Department of Electronic Engineering, Tsinghua University, Beijing, China
7 shared publications Yi Zhong
Department of Electronic Engineering, Tsinghua University, Beijing, China
6 shared publications- Boyi Zheng
Department of Electrical and Computer Engineering, University of Michigan, Ann Arbor, MI, USA
5 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (11) , 6373-6385
A Continuous-Time Incremental Zoom ADC With Extended Quantization, Easy-to-Drive Capacitive Input and Deadband-Embedded Gm-C Loop Filter
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (11) , 6373-6385
A Continuous-Time Incremental Zoom ADC With Extended Quantization, Easy-to-Drive Capacitive Input and Deadband-Embedded Gm-C Loop Filter
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 73 (10) , 6587-6599
Hybrid Delay Alignment Techniques for Low-Area Wideband Continuous-Time Pipelined ADCs
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 73 (10) , 6587-6599
Hybrid Delay Alignment Techniques for Low-Area Wideband Continuous-Time Pipelined ADCs
- 28 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (6) , 2798-2808
A 0.0035-mm 2 86-dB-SNR 1.25-MHz-BW Noise-Shaping SAR ADC Enabling kT/C Noise Shaping
This work presents a compact second-order noise shaping successive approximation register (NS-SAR) analog-to-digital converter (ADC) featuring a novel kT/C noise shaping technique. The proposed kT/C noise shaping technique selectively suppresses kT/C noise within the signal bandwidth of an oversampled SAR ADC. It avoids using a wideband noise extraction amplifier as in the conventional kT/C noise-canceling method. Thus, it achieves a greatly reduced input sampling capacitance, high power efficiency, and low input noise penalty. A prototype ADC implemented in a 28-nm process achieves 85.8 dB signal-to-noise-and-distortion ratio (SNDR) across a 1.25 MHz bandwidth with sampling capacitors of only 150 fF and off-chip mismatch calibration. The power consumption at 40 MS/s is 0.9 mW, resulting in a Schreier figure of merit ( $\text {FoM}_{S}$ ) of 177.2 dB. The ADC occupies an area of 0.0035-mm2, which is the smallest among all published ADCs with over 70 dB SNDR with calibration.
- 28 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (6) , 2798-2808
A 0.0035-mm 2 86-dB-SNR 1.25-MHz-BW Noise-Shaping SAR ADC Enabling kT/C Noise Shaping
This work presents a compact second-order noise shaping successive approximation register (NS-SAR) analog-to-digital converter (ADC) featuring a novel kT/C noise shaping technique. The proposed kT/C noise shaping technique selectively suppresses kT/C noise within the signal bandwidth of an oversampled SAR ADC. It avoids using a wideband noise extraction amplifier as in the conventional kT/C noise-canceling method. Thus, it achieves a greatly reduced input sampling capacitance, high power efficiency, and low input noise penalty. A prototype ADC implemented in a 28-nm process achieves 85.8 dB signal-to-noise-and-distortion ratio (SNDR) across a 1.25 MHz bandwidth with sampling capacitors of only 150 fF and off-chip mismatch calibration. The power consumption at 40 MS/s is 0.9 mW, resulting in a Schreier figure of merit ( $\text {FoM}_{S}$ ) of 177.2 dB. The ADC occupies an area of 0.0035-mm2, which is the smallest among all published ADCs with over 70 dB SNDR with calibration.
- 2 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. PP (00189200) , 1-13
An 8-bit 4.8-GS/s Four-Channel Time-Interleaved SAR ADC With Ping-Pong Comparators Using Global-Dither-Based Timing-Skew Calibration and Bit-Distribution-Based Offset Calibration
This article presents a global-dither-based timing-skew calibration technique for time-interleaved (TI) analog-to-digital converters (ADCs). By injecting a dithered reference signal globally at the input buffer, the proposed method ensures negligible residual timing skews after calibration. A dither-injection scheme based on source-follower (SF) addition is proposed to suppress the dither kickback and enable a single-tap dither-removal mechanism. In addition, a bit-distribution-based offset calibration method is introduced to support high-speed successive-approximation-register (SAR) ADCs employing ping-pong comparators without an additional calibration phase. Fabricated in a 28-nm CMOS process, a prototype 8-bit 4.8-GS/s four-channel TI SAR ADC achieves 44.3-dB SNDR and 58.2-dB SFDR at Nyquist. The ADC consumes 10.4 mW and achieves a Walden figure of merit (FoM) of 16.2 fJ/conv-step, including the input buffer and the on-chip calibration engine, demonstrating the effectiveness of the proposed background calibration techniques for high-speed TI SAR ADCs.
- 2 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. PP (00189200) , 1-13
An 8-bit 4.8-GS/s Four-Channel Time-Interleaved SAR ADC With Ping-Pong Comparators Using Global-Dither-Based Timing-Skew Calibration and Bit-Distribution-Based Offset Calibration
This article presents a global-dither-based timing-skew calibration technique for time-interleaved (TI) analog-to-digital converters (ADCs). By injecting a dithered reference signal globally at the input buffer, the proposed method ensures negligible residual timing skews after calibration. A dither-injection scheme based on source-follower (SF) addition is proposed to suppress the dither kickback and enable a single-tap dither-removal mechanism. In addition, a bit-distribution-based offset calibration method is introduced to support high-speed successive-approximation-register (SAR) ADCs employing ping-pong comparators without an additional calibration phase. Fabricated in a 28-nm CMOS process, a prototype 8-bit 4.8-GS/s four-channel TI SAR ADC achieves 44.3-dB SNDR and 58.2-dB SFDR at Nyquist. The ADC consumes 10.4 mW and achieves a Walden figure of merit (FoM) of 16.2 fJ/conv-step, including the input buffer and the on-chip calibration engine, demonstrating the effectiveness of the proposed background calibration techniques for high-speed TI SAR ADCs.
- 24 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. PP (00189200) , 1-12
A 200-MHz-BW Time-Interleaved Pipelined-SAR ADC With Shared Residue Integrator
This article presents a wideband, energy-efficient time-interleaved (TI) pipelined successive-approximation register (pipelined-SAR) analog-to-digital converter (ADC) incorporating a shared residue integrating amplifier. The proposed architecture achieves first-order noise shaping and gain error shaping (GES) within a high-speed TI framework through a 0-1-0 MASH structure. Two circuit-level techniques are introduced to further enhance performance: a flying-capacitor-biased ring amplifier enables continuous operation with reduced bias noise, and a two-step reference settling technique improves reference accuracy without additional power overhead. Fabricated in 28-nm CMOS, the prototype ADC operates at a 1.6-GHz sampling rate with $4\times $ OSR, achieving 71.2-dB SNDR over a 200-MHz bandwidth and a Schreier figure-of-merit (FoMS) of 172 dB. This work achieves the widest bandwidth among all published discrete-time (DT) noise-shaping ADCs.
- 24 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. PP (00189200) , 1-12
A 200-MHz-BW Time-Interleaved Pipelined-SAR ADC With Shared Residue Integrator
This article presents a wideband, energy-efficient time-interleaved (TI) pipelined successive-approximation register (pipelined-SAR) analog-to-digital converter (ADC) incorporating a shared residue integrating amplifier. The proposed architecture achieves first-order noise shaping and gain error shaping (GES) within a high-speed TI framework through a 0-1-0 MASH structure. Two circuit-level techniques are introduced to further enhance performance: a flying-capacitor-biased ring amplifier enables continuous operation with reduced bias noise, and a two-step reference settling technique improves reference accuracy without additional power overhead. Fabricated in 28-nm CMOS, the prototype ADC operates at a 1.6-GHz sampling rate with $4\times $ OSR, achieving 71.2-dB SNDR over a 200-MHz bandwidth and a Schreier figure-of-merit (FoMS) of 172 dB. This work achieves the widest bandwidth among all published discrete-time (DT) noise-shaping ADCs.
- Open Access
- 23 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Solid-State Circuits Society
- Vol. PP, 1
A 12-b 3-GS/s Pipelined ADC With Piecewise-Linear Gain Nonlinearity Calibration
This article presents a novel piecewise-linear gain nonlinearity calibration technique with low computational complexity and background coefficient extraction, enabling the use of open-loop amplifiers in pipelined ADCs for high energy efficiency. In addition to the gain nonlinearity calibration, circuit innovations such as a dual-path amplification scheme and a high-speed flash comparator are also introduced. Incorporating these techniques, a prototype 12-b 3-GS/s pipelined ADC is fabricated in a 28-nm CMOS process. Including the on-chip calibration engine, it consumes 50.5 mW and achieves an SNDR of 58.8 dB with a 1.5-GHz input, corresponding to a competitive FoMS of 164 dB.
- 23 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Solid-State Circuits Society
- Vol. PP, 1
Open AccessA 12-b 3-GS/s Pipelined ADC With Piecewise-Linear Gain Nonlinearity Calibration
This article presents a novel piecewise-linear gain nonlinearity calibration technique with low computational complexity and background coefficient extraction, enabling the use of open-loop amplifiers in pipelined ADCs for high energy efficiency. In addition to the gain nonlinearity calibration, circuit innovations such as a dual-path amplification scheme and a high-speed flash comparator are also introduced. Incorporating these techniques, a prototype 12-b 3-GS/s pipelined ADC is fabricated in a 28-nm CMOS process. Including the on-chip calibration engine, it consumes 50.5 mW and achieves an SNDR of 58.8 dB with a 1.5-GHz input, corresponding to a competitive FoMS of 164 dB.
- 18 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (12) , 4503-4514
A Filter-Embedded Pipe-SAR ADC With Progressive Conversion and Floating Charge Transfer Amplifier
This article presents a filter-embedded pipelined successive-approximation (SAR) (pipe-SAR) analog-to-digital converter (ADC) architecture that achieves high efficiency and wide bandwidth for next-generation wireless applications. A progressive conversion technique is proposed to improve the conversion speed of filter-embedded SAR ADCs by parallelizing the filtering and SAR quantization phases, which also provides a more process–voltage–temperature (PVT)-robust and clock-scalable transfer function compared to active RC filters. Additionally, this article introduces floating charge transferrer (FCT), a novel dynamic high-speed open-loop residue amplifier that offers low design complexity, high power efficiency, and inherent PVT robustness. Fabricated in a 28-nm CMOS process, the prototype filter-embedded ADC achieves 70.1-dB SNDR over an 80-MHz filter bandwidth while consuming only 4.9 mW of power, resulting in a Schreier figure of merit (FoM) of 172.2 dB. It provides over 30-dB out-of-band suppression for full-scale blockers and more than $5\times $ scalability in sampling rate and bandwidth, demonstrating its potential to substitute continuous-time delta-sigma modulators (CT-DSMs) in advanced wireless receivers.
- 18 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (12) , 4503-4514
A Filter-Embedded Pipe-SAR ADC With Progressive Conversion and Floating Charge Transfer Amplifier
This article presents a filter-embedded pipelined successive-approximation (SAR) (pipe-SAR) analog-to-digital converter (ADC) architecture that achieves high efficiency and wide bandwidth for next-generation wireless applications. A progressive conversion technique is proposed to improve the conversion speed of filter-embedded SAR ADCs by parallelizing the filtering and SAR quantization phases, which also provides a more process–voltage–temperature (PVT)-robust and clock-scalable transfer function compared to active RC filters. Additionally, this article introduces floating charge transferrer (FCT), a novel dynamic high-speed open-loop residue amplifier that offers low design complexity, high power efficiency, and inherent PVT robustness. Fabricated in a 28-nm CMOS process, the prototype filter-embedded ADC achieves 70.1-dB SNDR over an 80-MHz filter bandwidth while consuming only 4.9 mW of power, resulting in a Schreier figure of merit (FoM) of 172.2 dB. It provides over 30-dB out-of-band suppression for full-scale blockers and more than $5\times $ scalability in sampling rate and bandwidth, demonstrating its potential to substitute continuous-time delta-sigma modulators (CT-DSMs) in advanced wireless receivers.
- 16 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Letters
- Vol. 8, 205-208
A RRAM-Based CIM Design With in-Situ Transposable Computing and Hybrid-Precision Scheme for Edge Learning
Edge computing devices demand efficient transposable computing architectures to enable on-chip learning, necessitating novel hardware designs that balance performance and flexibility. We present an RRAM-based compute-in-memory macro capable of supporting both in-situ forward and backward propagation operations. The design incorporates an orthogonal-WL array structure with weight-level parallelism adjustment and a precision-driven input mechanism to enable flexible transposable computing. Additionally, optimized ADCs provide high throughput while maintaining area efficiency. The work exhibits a SOTA normalized area efficiency of 126.7 TOPS/mm2/bit, an energy efficiency of 2348.96 TOPS/W/bit, and a storage density of 4.84 Mb/mm2.
- 16 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Letters
- Vol. 8, 205-208
A RRAM-Based CIM Design With in-Situ Transposable Computing and Hybrid-Precision Scheme for Edge Learning
Edge computing devices demand efficient transposable computing architectures to enable on-chip learning, necessitating novel hardware designs that balance performance and flexibility. We present an RRAM-based compute-in-memory macro capable of supporting both in-situ forward and backward propagation operations. The design incorporates an orthogonal-WL array structure with weight-level parallelism adjustment and a precision-driven input mechanism to enable flexible transposable computing. Additionally, optimized ADCs provide high throughput while maintaining area efficiency. The work exhibits a SOTA normalized area efficiency of 126.7 TOPS/mm2/bit, an energy efficiency of 2348.96 TOPS/W/bit, and a storage density of 4.84 Mb/mm2.