PFPeng-Yu Feng

Peng-Yu Feng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Peng-Yu Feng has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • 3-D Printed Circularly Polarized Dielectric Flat Lens Antennas for Terahertz Applications

    by Peng-Yu Feng, Jin-Yang Xue, Ling-Li Hou, Zhipeng Lin

    This paper gives the design concept of a 3-D printed circularly polarized (CP) flat dielectric lens antenna at 340 GHz, which is with the cross-polarization filtering ability. The antenna element is composed of a triangular prism structure on the top to achieve the impedance matching, a part of cylindrical dielectric post in the middle as the phase compensator, as well as a square dielectric post on the bottom as the supportor. Under the illumination of a CP wave, a 2ψ transmission phase shift will be produced by rotating the element with an angle of ψ about the z-axis. Notably, the designed element is inherently with a polarization filtering ability, because it behaves distinctively to the incident CP waves with right or left chiralities. To prove the proposed design concept, a flat dielectric lens with 27×27 elements is arranged. After full-wave simulations, it can be found that the proposed THz dielectric flat lens antenna possesses good main beams as well as low axial ratio of CP waves.

  • A Large-Scale Lightweight Polyimide-Based Reflectarray Antenna for Multibeam Applications

    by Peng-Yu Feng, Jin-Yang Xue, Ling-Li Hou

    A polyimide-based reflectarray antenna with large physical aperture is proposed in this paper for multibeam applications in UHF band. Due to properties such as lightweight, flexibility and robustness, the polyimide film with a thickness of 0.05 mm is chosen to design the reflectarray antenna. By carefully tuning the geometrical parameters of array elements, a 25×50-element reflectarray with the overall aperture size of 5×10m2 can realize phase compensation along elevation dimension. Moreover, a 32-element linear feed array is employed to illuminate the reflectarray antenna along azimuth dimension. Simulated results show that 31 narrow beams with 3-dB beam crossover levels can across ±30o in 300-1000 MHz, which proves the effectiveness of the proposed design.


  • Phased Array Fed Reflector Antenna for OAM-Generating and Beam-Scanning Applications

    by Peng-Yu Feng, Ling-Li Hou, Jin-Yang Xue

    This paper shows the design concept of a reflector antenna with a small Vivaldi array feed antenna. The proposed design is employed for launching angular momentum (OAM) beams, as well as beam scanning applications. In the design procedure, the working mechanisms of the Vivaldi array fed-reflector are discussed firstly. Then, the design details of the Vivaldi array feed are analyzed, followed by the discussions of multi-mode OAM beams and scanning beam radiation patterns. Thanks to the inherent multi-beam abilities of the reflector, the 0-OAM-mode beam can be steered over a conical scanning range of ±10°. Moreover, the flexible excitations of the Vivaldi array feed provide more possibilities to superpose multiple OAM states simultaneously, which can enhance the spectrum efficiency and the channel capacity.


  • Integrative Transmitarray With Gain-Filtering and Low-Scattering Characteristics

    by Peng-Yu Feng, Shi-Wei Qu, Ka Fai Chan, Shiwen Yang, Chi Hou Chan

    This article presents a design concept of integrative transmitarray antenna (TAA) with gain-filtering and low-scattering characteristics. The integrative TAA element combines a bandpass frequency-selective surface (FSS) element and a square dielectric post with antireflection pyramidal structures (SDPP), achieving the simultaneous control of in-band transmitted waves and out-of-band reflected waves. The FSS element provides the phase-shifting and gain-filtering capabilities around the center operating frequency $f_{0}$ . Meanwhile, the SDPP elements with different heights are utilized to reduce the scattering cross section (SCS) based on the phase cancellation principle. To realize wideband and wide-angle SCS reductions, also to mitigate the in-band radiation degradation, the optimal SDPP arrangement is determined with subarray segmentation. In the experiment, a $42\times42$ -element integrative TAA is designed. Against only the FSS TAA, the simulated results show that loading the optimal SDPP array can realize the scattering reduction in a 10:1 bandwidth up to 60°, including $\sim 5/\sim 10$ dB SCS reductions in 0.5– $1.5~f_{0}$ /1.5– $5~f_{0}$ , respectively. Moreover, the integrative TAA achieves gain-filtering responses with out-of-band suppression levels higher than 20 dB. After fabricating the FSS TAA and the SDPP array by the technologies of standard PCB fabrication and 3-D printing, respectively, the proposed design is further demonstrated by experiments.


  • Dual-Polarized Filtering Transmitarray Antennas With Low-Scattering Characteristic

    by Peng-Yu Feng, Shi-Wei Qu, Shiwen Yang

    A filtering transmitarray antenna (TAA) with high-gain in-band radiations at the $X$ -band and an out-of-band low-scattering characteristic is presented in this communication. The proposed composite TAA element consists of a dual-polarized resistive sheet, a fixed bandstop frequency-selective surface (FSS) element, and an adjustable bandpass FSS element also serving as a phase shifter. The resistive element is constructed by inserting a parallel inductor–capacitor (PLC) resonant structure into the center of a lumped-resistor-loaded metallic dipole. A transparent frequency-domain window at the center operating frequency ( $f_{c}$ ) is created by the PLC resonance and is further shared by both FSS elements, hence allowing for high in-band transmission herein. At frequencies below or above $f_{c}$ , the whole composite TAA element acts as an absorber with the bandpass or bandstop FSS elements as the ground planes for the resistive sheet, respectively. The measured results show that the composite TAA can achieve gain-filtering responses with out-of-band suppression levels ≥25 dB, ~8 dB scattering cross section (SCS) reductions in 4–7 and 14–20 GHz, and the radiation gain of 25.3 dBi simultaneously. Because of these merits, the proposed design can relieve the stress on filtering circuit designs, also offering an attractive solution in stealth technology.


  • Open Access

    Low-Profile High-Gain and Wide-Angle Beam Scanning Phased Transmitarray Antennas

    by Peng-Yu Feng, Shi-Wei Qu, Xiao-Han Chen, Shiwen Yang

    Combining the inherent multiple beam capabilities of transmitarray antennas (TAAs) and the flexible fields launched by phased array antennas (PAAs), PAA-fed TAAs are proposed in this paper for high-gain and wide-angle beam scanning in millimeter-wave (MMW) band. After thoroughly analyzing the operating mechanisms of the PAA-fed TAAs, a divisionally multi-focal method is proposed to deploy the TAA elements, which can be better adapted to the PAA feed whereby the scanning performances are improved. Subsequently, two PAA-fed TAAs with feeding distance-to-diameter ratios (H/Ds) of mere 0.28 are numerically demonstrated at 39 GHz, wherein both TAAs are composed of the square subwavelength low-pass elements and the cavity-backed bowtie patch antenna is identified as the PAA feed element. Simulated results show that the first design example achieves a conical beam steering over ±30° with a 30.9 dBi peak gain and gain drop below 2.1 dB. The second design can scan across ±50°/±10° along the E/H planes, respectively, together with the gain losses of 3.3 and 1.6 dB from the peak value of 31.1 dBi. Finally, the first design case is fabricated and measured for experimental verification purpose, whose measured results agree reasonably well with the simulated ones.


  • OAM-Generating Transmitarray Antenna With Circular Phased Array Antenna Feed

    by Peng-Yu Feng, Shi-Wei Qu, Shiwen Yang

    A transmitarray antenna (TAA) with a small-scale circular phased array antenna (PAA) feed is proposed in this paper to generate angular momentum (OAM)-carrying radio beams. After analyzing the operating mechanisms of the OAM-generating PAA-fed TAA, its numerical model is further developed to determine the TAA element arrangement and the PAA feed excitation coefficients. Furthermore, a three-layer element with polarization-conversion property and the traditional patch antenna element are identified as the elements of the TAA and PAA feed, respectively. Benefiting from the intrinsic multi-beam capabilities of the TAA, the steering of the Zero-OAM-mode beam is firstly discussed, where a conical scanning across an angular range of ±25° is realized. Meanwhile, the creation of multiple pure or mixed OAM beams with helical phase fronts is also presented, where the superposition of multiple OAM states provides more possibilities to increase the channel capacity and spectrum efficiency. To facilitate the experiments, an 8×8 Butler matrix with a bandwidth over 30% is designed, which integrated with the array-fed TAA also provides an attractive solution to simultaneously generate multiple OAM modes without requiring any active modules. The experimental results agree reasonably well with the numerical ones, validating the feasibility of our idea to design a high-gain OAM-generating PAA-fed TAA.


  • Ultrawideband Low-Profile Transmitarray With Vivaldi Array Feed

    by Peng-Yu Feng, Shi-Wei Qu, Shiwen Yang

    A transmitarray antenna (TAA) with a small-scale phased array antenna (PAA) feed is proposed in this communication. After modeling the PAA-fed TAAs and constructing the cost functions, a three-step optimization process is introduced to determine the TAA element arrangement as well as the PAA feed excitation coefficients. Then, a novel ultra-wideband TAA element is proposed, which has a pair of connected sheep-horn metallic patterns in the middle layer sandwiched by two metallic orthogonal grid polarizers on the upper and bottom layers. Furthermore, traditional Vivaldi antenna element is identified as the element of a 4×8-element PAA feed array (central 4×4 active elements), which is employed to illuminate a 25×25-element circular TAA with a focus-to-diameter ratio (F/D) of mere 0.43. The simulated results show that stable radiation patterns with good main beam shapes and reasonable sidelobe levels are obtained in the interested frequency band. The measured results agree reasonably well with the simulated ones, validating the feasibility of our method to design an ultra-wideband low-profile PAA-fed TAA.


  • Octave Bandwidth Transmitarrays With a Flat Gain

    by Peng-Yu Feng, Shi-Wei Qu, Shiwen Yang

    A wideband linearly polarized transmitarray antenna operating in 7-16 GHz is presented in this paper. First, a wideband element with three metallic layers is proposed, which is composed of a split circular ring connected by a narrow strip in the middle layer, and two polarizers in the upper and bottom layers. This element features a low transmission loss and approximately linear phase curves in a wide frequency band over one octave. Then, an optimization method is introduced to design the transmitarray that follows the bandwidth definition of 1 dB gain drop. The first key point of this method is determining the transmitarray element distribution with the weighted reference phases. The second is realizing wideband performances by controlling the calculated directivities and radiation patterns of the modified wideband transmitarray model at all operating frequencies. In the experiment, a 25×25-element horn-fed transmitarray with a 240 × 240 mm 2 aperture area is designed and fabricated. The simulated results show that its bandwidths of 0.5, 1.5, and 3 dB gain drop are 41%, 56%, and 71%, respectively. Moreover, a peak aperture efficiency of 40.7% is achieved. Measured results agree reasonably well with the simulated ones. These results validate the proposed wideband element and the optimization method.


  • Ku-Band Transmitarrays With Improved Feed Mechanism

    by Peng-Yu Feng, Shi-Wei Qu, Shiwen Yang, Long Shen, Jianping Zhao

    Combining the advantages of lens antenna and array techniques, transmitarrays have been widespreadly concerned in recent years. In the first part of this paper, a wideband four-layer transmitarray operating at 13 GHz fed by a horn with a focus-to-diameter ratio (F/D) of unity is proposed. The employed elements composed of dual-resonance double hexagonal rings are closely arranged in the honeycomb lattice. The simulated results show that the transmitarray can achieve a 53.34% peak aperture efficiency and a 19.23% bandwidth for 1 dB gain drop, respectively. The factors with strong influences on the measured results are analyzed. In the second part, an improved feed mechanism, which is aimed at reducing the transmitarray profile, is discussed in detail. The conjugate field matching technology is utilized to realize an ideal compensation. The small-scale antenna array, which has a nearly identical aperture size to the feed horn applied in the first design, can effectively excite the transmitarray with a profile reduction of 64.5%. These prototypes confirm the feasibility of designing a wideband transmitarray and a low-profile array-fed transmitarray.