MMMitsunori Miyamoto

Mitsunori Miyamoto

*This is an algorithmically generated author record based on publicly available information.

Mitsunori Miyamoto has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    In-situ measurement for drain current of SiC-MOSFET using optical-probe current sensor with half-open loop magnetic yoke

    by Mitsunori Miyamoto, Makoto Sonehara, Toshiya Kubo, Tetsuya Aiba, Hayato Takada, Daichi Hirai, Ryu Nagahama

    In recent years, the switching frequency of power converters has increased significantly with the widespread adoption of wide-bandgap power semiconductors. Conventional sensors, such as current transformers and Rogowski coils, are limited by their size and frequency bandwidth, making accurate current measurement difficult. The optical probe current sensor developed by the authors is effective for high-frequency current measurements due to its compact sensor head and wide bandwidth (DC to 150 MHz). Although this sensor can measure magnetic fields in narrow spaces, measuring wideband current in wide conductors like busbars or copper traces remains challenging due to skin and proximity effects. In this study, we improved the frequency response of the sensor by integrating it with a half-open loop magnetic yoke that homogenizes the magnetic field around the conductor. Finally, we report the in-situ measurement results of the drain current flowing through a SiC-MOSFET during a double-pulse test using the proposed sensor.

  • Development of an Optical Probe Current Sensor for Local and Narrow Area Measurement Using Magnetic Domain Reversal in Bismuth-Substituted Rare-Earth Iron Garnet Crystal

    by Satoshi Sue, Mitsunori Miyamoto, Toshiya Kubo, Makoto Sonehara, Toshiro Sato

    The authors have developed an optical probe electric current sensor using a Faraday effect of granular magnetic film as a new current sensor to replace a current transformer and a Rogowski coil. However, the sensitivity for small current fields in the previously developed sensor was low, and the signal was buried in the floor noise, making accurate measurement impossible. In this study, we investigated a sensor using magnetic domain reversal of Bi:RIG crystal for Faraday element to solve the previous problem and succeeded in developing a sensor with excellent linearity and a high signal-to-noise ratio by optimizing the Bi:RIG crystal thickness and the light-beam diameter to be irradiated.


  • Enhancement of Faraday effect of transparent ferromagnetic Co‐MgF2 granular film by introducing Fabry–Pérot resonant structure

    by Mitsunori Miyamoto, Toshiya Kubo, Yuta Fujishiro, Kenta Shiota, Makoto Sonehara, Toshiro Sato

    To detect the magnetic field using polarization of a light, transparent magnetic material having a Faraday effect is required. The Co‐MgF2 granular film is promising as a candidate of the Faraday element for the magnetic field sensing. In this study, Fabry–Pérot resonant structure was introduced into the Co‐MgF2 granular film to enhance the Faraday effect. It was found that the Faraday effect per unit film thickness [deg/μm] was enhanced due to a light localized in the Co‐MgF2 granular layer sandwiched by Bragg mirror of the insulator multilayer. The maximum Faraday effect of the proposed structure was −1.24°/μm, which was about 3.4 times enhancement compared with a single Co‐MgF2 film, when the number of layer period x in Fabry–Pérot resonant multilayer was 5, where the structure was substrate/(Ta2O5/SiO2)x/Co‐MgF2/(SiO2/Ta2O5)2/Air. Furthermore, the multicavity structure, consisting of the Fabry–Pérot resonant multilayer film continuously placed, exhibited a 50% increase of figure of merit (FOM) defined as Faraday rotation angle per transmission loss [deg/dB].

  • Fabrication of Ferromagnetic Co–MgF2 Granular Film With High Transmittance and Large Faraday Effect for Optical Magnetic Field Sensor

    by Mitsunori Miyamoto, Toshiya Kubo, Yuta Fujishiro, Kenta Shiota, Makoto Sonehara, Toshiro Sato

    In the magneto-optical devices and sensors using the Faraday effect, maintaining the transmitted light intensity of a Faraday element is a key issue. A granular film with ferromagnetic fine metals dispersed in an insulator matrix has been expected to have both high transmittance and large Faraday effect. In this paper, we fabricated the Co–MgF 2 granular film prepared by co-evaporation and investigated the effect of substrate heating temperature during co-evaporation and post-annealing on the transmittance and the Faraday rotation of the granular film. The Co–MgF 2 granular film deposited at high substrate temperature was exhibited like a ferromagnetic behavior and high transmittance. Also, we found that the figure of merit [deg./dB], which was defined as a ratio of a Faraday rotation angle and decay of the transmitted light, was improved by post-annealing.