Xiaojia Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiaojia Wang has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
- Baosheng Jin
Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment
10 shared publications Didi Gai
5 shared publicationsFengxia An
Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment
5 shared publicationsDelu Chen
Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education School of Energy and Environment Southeast University Nanjing 210096 China
4 shared publications- Xudong Wang
Jiangsu Key Laboratory of Process Enhancement and Energy Equipment Technology, School of Mechanical and Power Engineering, Nanjing Tech University, Nanjing 211816, China
4 shared publications Danyang Shao
Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing 210096, China
3 shared publications
Latest Publications
- 21 September 2026
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 16 (18) , 341
Synergistic effects of chemical looping gasification of domestic sludge with corn straw using red mud oxygen carrier for hydrogen-rich syngas production
- 21 September 2026
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 16 (18) , 341
Synergistic effects of chemical looping gasification of domestic sludge with corn straw using red mud oxygen carrier for hydrogen-rich syngas production
- 6 September 2026
- Published by Elsevier in Biomass and Bioenergy
- Vol. 217
Steam-regulated chemical looping gasification–reforming of corn straw for co-production of hydrogen-rich syngas and carbon nanotubes
- 6 September 2026
- Published by Elsevier in Biomass and Bioenergy
- Vol. 217
Steam-regulated chemical looping gasification–reforming of corn straw for co-production of hydrogen-rich syngas and carbon nanotubes
- Open Access
Boosting Agroforestry Waste Valorization: Red Mud Oxygen Carriers with Tailored Oxygen Release for Enhanced Chemical Looping Gasification
In this study, red mud oxygen carriers were obtained by varying the preparation temperature and characterized using XRD, SEM, BET, and H2-TPR. The results showed that the oxygen carrier prepared at 1000 °C exhibited high reactivity due to clear grain boundaries, uniform size, high porosity, and smooth grain morphology. Additionally, the release of oxygen was accelerated, as indicated by the H2-TPR results. The water hyacinth, an aquatic plant of agroforestry waste, was selected as the research object, and the chemical looping gasification (CLG) reaction performance with prepared red mud carriers was investigated. The experiment results showed that the total gas yield (Yg) of the carriers prepared at 1000 °C reached a maximum of 1.02 Nm3/kg, had a high low-level heating value (LHV) of 12.06 MJ/Nm3, cold gas efficiency (CGE) of 91.49%, and carbon conversion rate (ηc) of 82.65%. This indicated that the red mud carriers synthesized at 1000 °C have a faster oxygen release rate, more concentrated oxygen release, and stronger reaction activity.
Open AccessBoosting Agroforestry Waste Valorization: Red Mud Oxygen Carriers with Tailored Oxygen Release for Enhanced Chemical Looping Gasification
In this study, red mud oxygen carriers were obtained by varying the preparation temperature and characterized using XRD, SEM, BET, and H2-TPR. The results showed that the oxygen carrier prepared at 1000 °C exhibited high reactivity due to clear grain boundaries, uniform size, high porosity, and smooth grain morphology. Additionally, the release of oxygen was accelerated, as indicated by the H2-TPR results. The water hyacinth, an aquatic plant of agroforestry waste, was selected as the research object, and the chemical looping gasification (CLG) reaction performance with prepared red mud carriers was investigated. The experiment results showed that the total gas yield (Yg) of the carriers prepared at 1000 °C reached a maximum of 1.02 Nm3/kg, had a high low-level heating value (LHV) of 12.06 MJ/Nm3, cold gas efficiency (CGE) of 91.49%, and carbon conversion rate (ηc) of 82.65%. This indicated that the red mud carriers synthesized at 1000 °C have a faster oxygen release rate, more concentrated oxygen release, and stronger reaction activity.
- Open Access
Microwave Chemical Looping Synergistic Gasification of Polypropylene Plastic and Water Hyacinth
The microwave chemical looping synergistic gasification characteristics of municipal solid waste polypropylene plastic and the organic solid waste water hyacinth are experimentally investigated in this study. In addition, the characterizations of oxygen carriers before and after the reaction are combined to analyze the evolution of the microscopic morphology of oxygen carriers and the changes in the relative contents of each valence state of Fe and O elements. The results show that an increase in the water hyacinth mixing ratio presents positive effects on tar cracking and a slight negative effect on syngas yield. At the water hyacinth mixing ratio of 75%, the cold gas efficiency and carbon conversion can reach maximum values of 77.64% and 69.9%, respectively. The H2 yield and H2/CO ratio in syngas can be also improved to 0.34 Nm3/kg and 1.62, respectively. In addition, a minimum tar yield of 0.133 g/g (fuel) can be obtained at this mixing ratio. Moreover, the addition of water hyacinth has a continuous increase effect on monocyclic aromatic hydrocarbon (MAH) products of tar, and a continuous decrease effect on naphthalene and bicyclic aromatic hydrocarbons (NAH) products. This work explores the synergistic properties of organic waste plastics and agroforestry wastes during microwave chemical looping gasification, which is a useful exploration for solving the environmental problems caused by waste materials and agroforestry wastes as well as realizing the resourceful utilization of solid wastes.
Open AccessMicrowave Chemical Looping Synergistic Gasification of Polypropylene Plastic and Water Hyacinth
The microwave chemical looping synergistic gasification characteristics of municipal solid waste polypropylene plastic and the organic solid waste water hyacinth are experimentally investigated in this study. In addition, the characterizations of oxygen carriers before and after the reaction are combined to analyze the evolution of the microscopic morphology of oxygen carriers and the changes in the relative contents of each valence state of Fe and O elements. The results show that an increase in the water hyacinth mixing ratio presents positive effects on tar cracking and a slight negative effect on syngas yield. At the water hyacinth mixing ratio of 75%, the cold gas efficiency and carbon conversion can reach maximum values of 77.64% and 69.9%, respectively. The H2 yield and H2/CO ratio in syngas can be also improved to 0.34 Nm3/kg and 1.62, respectively. In addition, a minimum tar yield of 0.133 g/g (fuel) can be obtained at this mixing ratio. Moreover, the addition of water hyacinth has a continuous increase effect on monocyclic aromatic hydrocarbon (MAH) products of tar, and a continuous decrease effect on naphthalene and bicyclic aromatic hydrocarbons (NAH) products. This work explores the synergistic properties of organic waste plastics and agroforestry wastes during microwave chemical looping gasification, which is a useful exploration for solving the environmental problems caused by waste materials and agroforestry wastes as well as realizing the resourceful utilization of solid wastes.
- 20 January 2025
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 487, 137237
Targeted migration mechanisms of nitrogen-containing pollutants during chemical looping co-gasification of coal and microalgae
- 20 January 2025
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 487, 137237
Targeted migration mechanisms of nitrogen-containing pollutants during chemical looping co-gasification of coal and microalgae
- 21 September 2024
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 38 (19) , 18976-18987
Experimental and Numerical Simulation Studies Based on the Active Regulation Mechanism of Carbon Stripper
- 21 September 2024
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 38 (19) , 18976-18987
Experimental and Numerical Simulation Studies Based on the Active Regulation Mechanism of Carbon Stripper
- Open Access
- 22 January 2024
- Published by Oxford University Press (OUP) in Clean Energy
- Vol. 8 (1) , 261-279
Numerical modelling and simulation analysis of wind blades: a critical review
Wind energy has emerged as a promising renewable energy source and wind turbine technology has developed rapidly in recent years. Improved wind turbine performance depends heavily on the design and optimization of wind blades. This work offers a critical evaluation of the state of the art in the field of numerical modelling and simulation analysis, which have become crucial for the design and optimization of wind blades. The evaluation of the literature includes considerable research on the application of numerical methods for the structural and aerodynamic performance of wind blades under various operating situations, as well as for analysis and optimization of wind blades. The article illustrates how numerical techniques can be used to analyse wind blade performance and maximize design efficiency. The study of blade performance under various wind conditions has also been made possible through the use of simulation analysis, thus enhancing the efficiency and dependability of wind turbines. Improvements in wind turbine efficiency and dependability, and ultimately the move towards a more sustainable energy future, will be greatly helpful for the development of numerical modelling and simulation techniques.
- 22 January 2024
- Published by Oxford University Press (OUP) in Clean Energy
- Vol. 8 (1) , 261-279
Open AccessNumerical modelling and simulation analysis of wind blades: a critical review
Wind energy has emerged as a promising renewable energy source and wind turbine technology has developed rapidly in recent years. Improved wind turbine performance depends heavily on the design and optimization of wind blades. This work offers a critical evaluation of the state of the art in the field of numerical modelling and simulation analysis, which have become crucial for the design and optimization of wind blades. The evaluation of the literature includes considerable research on the application of numerical methods for the structural and aerodynamic performance of wind blades under various operating situations, as well as for analysis and optimization of wind blades. The article illustrates how numerical techniques can be used to analyse wind blade performance and maximize design efficiency. The study of blade performance under various wind conditions has also been made possible through the use of simulation analysis, thus enhancing the efficiency and dependability of wind turbines. Improvements in wind turbine efficiency and dependability, and ultimately the move towards a more sustainable energy future, will be greatly helpful for the development of numerical modelling and simulation techniques.