Chunguo Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chunguo Liu has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
Tao Yue
Roll Forging Research Institute, Jilin University (Nanling Campus), Changchun, People’s Republic of China
6 shared publicationsHexuan Shi
4 shared publicationsJunwei Sun
4 shared publicationsMing Li
Roll Forging Research Institute, Jilin University (Nanling Campus), Changchun, PR China
4 shared publicationsRundong Ding
4 shared publicationsXianhe Cheng
4 shared publications
Latest Publications
- Open Access
Multi-Scale Modeling in Forming Limits Analysis of SUS430/Al1050/TA1 Laminates: Integrating Crystal Plasticity Finite Element with M–K Theory
Numerical simulations of the forming limit diagram (FLD) for SUS430/Al1050/TA1 laminated metal composites (LMCs) are conducted through the crystal plasticity finite element (CPFE) model integrated with the Marciniak–Kuczyński (M–K) theory. Representative volume elements (RVEs) that reconstruct the measured crystallographic texture, as characterized by electron backscatter diffraction (EBSD), are developed. The optimal grain number and mesh density for the RVE are calibrated through convergence analysis by curve-fitting simulated stress–strain responses to the uniaxial tensile data. The established multi-scale model successfully predicts the FLDs of the SUS430/Al1050/TA1 laminated sheet under two stacking sequences, namely, the SUS layer or the TA1 layer in contact with the die. The Nakazima test results validate the effectiveness of the proposed model as an efficient and accurate predictive tool. This study extends the CPFE–MK framework to multi-layer LMCs, overcoming the limitations of conventional single-layer models, which incorporate FCC, BCC, and HCP crystalline structures. Furthermore, the deformation-induced texture evolution under different loading paths is analyzed, establishing the relationship between micro-scale deformation mechanisms and the macro-scale forming behavior.
Open AccessMulti-Scale Modeling in Forming Limits Analysis of SUS430/Al1050/TA1 Laminates: Integrating Crystal Plasticity Finite Element with M–K Theory
Numerical simulations of the forming limit diagram (FLD) for SUS430/Al1050/TA1 laminated metal composites (LMCs) are conducted through the crystal plasticity finite element (CPFE) model integrated with the Marciniak–Kuczyński (M–K) theory. Representative volume elements (RVEs) that reconstruct the measured crystallographic texture, as characterized by electron backscatter diffraction (EBSD), are developed. The optimal grain number and mesh density for the RVE are calibrated through convergence analysis by curve-fitting simulated stress–strain responses to the uniaxial tensile data. The established multi-scale model successfully predicts the FLDs of the SUS430/Al1050/TA1 laminated sheet under two stacking sequences, namely, the SUS layer or the TA1 layer in contact with the die. The Nakazima test results validate the effectiveness of the proposed model as an efficient and accurate predictive tool. This study extends the CPFE–MK framework to multi-layer LMCs, overcoming the limitations of conventional single-layer models, which incorporate FCC, BCC, and HCP crystalline structures. Furthermore, the deformation-induced texture evolution under different loading paths is analyzed, establishing the relationship between micro-scale deformation mechanisms and the macro-scale forming behavior.
- 29 August 2025
- Published by Elsevier in Thin-Walled Structures
- Vol. 217
Rapidly predicting curing process-induced deformation of the thin-walled Omega-shaped composite parts using a deep learning method
- 29 August 2025
- Published by Elsevier in Thin-Walled Structures
- Vol. 217
Rapidly predicting curing process-induced deformation of the thin-walled Omega-shaped composite parts using a deep learning method
- 15 July 2024
- Published by Wiley in Advanced Engineering Materials
- Vol. 26 (16)
Forming Limits Prediction of Laminated SUS430/Al1050/SUS430 Composites and the Effect of Component Properties on Mechanical Performance
In this study, a constitutive model applied to predict the tensile properties and fracture behavior of well‐bonded multilayered metal composites is extended. The equivalent single‐layer model, as a convenient method, is introduced into finite‐element simulations by combining it with an improved Xue–Wierzbicki damage plasticity model that considers material anisotropy. The steel use stainless (SUS) 430/Al1050/SUS430 laminated sheet fabricated by cold rolling is selected as the research material. The quasistatic uniaxial tests and Nakazima tests are operated to verify the accuracy of the proposed method. The mean errors in tensile stress and fracture forming limit strains are 2% and 3%, respectively. A load‐sharing mixture rule is proposed to assess the effects of the volume fraction, strength coefficient, and hardening exponent of the constituent materials on the mechanical properties of the laminates. In the results, it is indicated that the laminate exhibits sufficient elongation and remains markedly enhanced in tensile strength, reaching 470 Mpa when the ductile Al layer is combined with the higher strength and hardenability steel layer. In this research, it is aimed to clarify the formability characteristics in laminated composites for optimal sheet configuration design and development.
- 15 July 2024
- Published by Wiley in Advanced Engineering Materials
- Vol. 26 (16)
Forming Limits Prediction of Laminated SUS430/Al1050/SUS430 Composites and the Effect of Component Properties on Mechanical Performance
In this study, a constitutive model applied to predict the tensile properties and fracture behavior of well‐bonded multilayered metal composites is extended. The equivalent single‐layer model, as a convenient method, is introduced into finite‐element simulations by combining it with an improved Xue–Wierzbicki damage plasticity model that considers material anisotropy. The steel use stainless (SUS) 430/Al1050/SUS430 laminated sheet fabricated by cold rolling is selected as the research material. The quasistatic uniaxial tests and Nakazima tests are operated to verify the accuracy of the proposed method. The mean errors in tensile stress and fracture forming limit strains are 2% and 3%, respectively. A load‐sharing mixture rule is proposed to assess the effects of the volume fraction, strength coefficient, and hardening exponent of the constituent materials on the mechanical properties of the laminates. In the results, it is indicated that the laminate exhibits sufficient elongation and remains markedly enhanced in tensile strength, reaching 470 Mpa when the ductile Al layer is combined with the higher strength and hardenability steel layer. In this research, it is aimed to clarify the formability characteristics in laminated composites for optimal sheet configuration design and development.
- Open Access
Estimation of Mechanical Properties of Aluminum Alloy Based on Indentation Curve and Projection Area of Contact Zone
This study proposes a method for determining aluminum alloys’ yield stress and hardening index based on indentation experiments and finite element simulations. Firstly, the dimensionless analysis of indentation variables was performed on three different aluminum alloys using the same maximum indentation depth to obtain load-displacement curves. Then, laser confocal microscopy was used to observe the residual indentation morphology. And four dimensionless parameters were derived from the load-displacement curves while another dimensionless parameter was obtained from the projection area of the contact zone. Subsequently, a genetic algorithm was employed to solve these five dimensionless parameters and estimate the yield stress and hardening index. Finally, the predicted results are compared with uniaxial tensile experiments and the results obtained are essentially the same. The yield stress and hardening index can be predicted using this method. And an example is used to verify that this method enables predictions for unidentified “mysterious material” and the expected results agree with the experiments.
Open AccessEstimation of Mechanical Properties of Aluminum Alloy Based on Indentation Curve and Projection Area of Contact Zone
This study proposes a method for determining aluminum alloys’ yield stress and hardening index based on indentation experiments and finite element simulations. Firstly, the dimensionless analysis of indentation variables was performed on three different aluminum alloys using the same maximum indentation depth to obtain load-displacement curves. Then, laser confocal microscopy was used to observe the residual indentation morphology. And four dimensionless parameters were derived from the load-displacement curves while another dimensionless parameter was obtained from the projection area of the contact zone. Subsequently, a genetic algorithm was employed to solve these five dimensionless parameters and estimate the yield stress and hardening index. Finally, the predicted results are compared with uniaxial tensile experiments and the results obtained are essentially the same. The yield stress and hardening index can be predicted using this method. And an example is used to verify that this method enables predictions for unidentified “mysterious material” and the expected results agree with the experiments.