PDPraveen Dwivedi

Praveen Dwivedi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Praveen Dwivedi has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Exploring Switching Behavior of Dual-Gate RF GaN HEMTs: Characterization and Modeling

    by Mohammad Sajid Nazir, Praveen Dwivedi, Ahtisham Pampori, Yun-Yueh Hsieh, Min-Li Chou, Yogesh Singh Chauhan

    This letter presents a comprehensive performance analysis and both linear and nonlinear modeling of dual-gate gallium nitride (GaN)-on-silicon (Si) depletion mode high electron mobility transistor (HEMT) devices across various switch topologies. We evaluate large-signal behavior to assess power handling capabilities in three configurations: series, shunt, and single-pole single-throw (SPST) at 6.5 GHz. For the SPST switch at 500 MHz, measurements reveal an on-resistance ( $R_{\textsc{on}}$ ) of 2.7 $\Omega {\cdot }\text{mm}$ , off-capacitance ( $C_{\textsc{off}}$ ) of 53.3 fF, peak insertion loss (IL) of 0.6 dB, and isolation (ISO) of 53.3 dB. These metrics are also evaluated across six different peripheries, ranging from NF $\cdot $ W $=$ 400 to 6400 $\mu $ m. In addition, we introduce and validate a surface potential-based modeling framework for dual-gate RF GaN HEMTs using on-wafer dc measurements, common-gate S-parameters, and large-signal measurements. Furthermore, we explore the potential single-pole–double-throw (SPDT) design by utilizing SPST switch S2P files in conjunction with model results.


  • Device optimization and sensitivity analysis of a double-cavity graded MgZnO/ZnO MOSHEMT for biomolecule detection

    by Kiran G, Sushil Kumar Pandey, Praveen Dwivedi, Rohit Singh

    The detailed analytical model of biosensing parameters was proposed for a double-cavity graded MgZnO/ZnO metal oxide semiconductor high electron mobility transistor (MOSHEMT) with cap layer-based biosensor including transfer characteristic, output characteristic, change in cut-off voltage ( Δ V off ), transconductance ( g m ), sensitivity, and selectivity. A thorough investigation of dielectric modulation in a double nanogap cavity under the gate was conducted with a focus on improving the sensing characteristics of a MOSHEMT to indicate the presence of biomolecules like Uricase, Streptavidin, Protein, and ChOx. The dielectric modulation and the Poisson equation were used to determine the effective capacitance and cut-off voltage in the cavity region. Consequently, the changes in the cut-off voltage and the drain current of the device were used as the sensing metrics for the detection of biomolecules in the cavity regions. It was found that the proposed graded MgZnO/ZnO MOSHEMT-based biosensor demonstrates a higher change in cut-off voltage and drain current in comparison to the previous works, suggesting higher sensitivity for biomolecules.


  • Performance assessment of pocket tunnel FET and accumulation mode FET for detection of streptavidin protein

    by Akash Jadhav, Shivendra Yadav, Sushil K Pandey, Vivek Garg, Praveen Dwivedi

    In this paper, Dielectrically Modulated (DM) pocket Tunnel Field Effect Transistor (TFET) and Accumulation Mode Field Effect Transistor (AMFET) biosensors are examined for the Sensitivity estimation of different thicknesses of biotarget (Streptavidin)/bioreceptor (Biotin)/silica binding protein (SBP or APTES) biomolecules with a fully filled and partially filled cavity. The sensitivity parameter is based on realistic process detection and is calculated as the ratio of biotarget to bioreceptor drain current for neutral and charged biomolecules. The effect on the sensitivity for a filled cavity is observed for: a) varying the thickness of streptavidin and Biotin for fixed SBP (APTES) thickness, b) varying the thickness of streptavidin and APTES for fixed biotin thickness, for both Pocket TFET and AMFET. The maximum sensitivity is observed in 4 nm thick streptavidin for the front gate voltage V fg: −3.8 V and V fg: −1.6 V for pocket TFET and AMFET, respectively.


  • Unveiling the Potential of Bismuth Oxy-Iodide (BiOI)-Based Photovoltaic Device for Indoor Light Harvesting

    by Sarita Manjhi, Gaurav Siddharth, Sushil K. Pandey, Brajendra S. Sengar, Praveen Dwivedi, Vivek Garg

    Indoor photovoltaics (IPVs) have piqued the interest of many because of their potential to power small and portable electronics and photonic devices. This work investigates one of the exemplary perovskite inspired materials (PIMs), bismuth oxy-iodide (BiOI). In order to explore the potential of BiOI in the indoor environment, the baseline model of BiOI device indium tin oxide (ITO)/NiO $_{\textit{x}}$ /BiOI/ZnO/Contact is developed using the experimental results of a recent study with a power conversion efficiency (PCE) of 4%. The performance of the proposed device is fine-tuned by investigating the effect of: 1) absorber thickness and defect density and 2) valence band offset (VBO) between the hole transport layer (HTL) and absorber interface (NiO $_{\textit{x}}$ /BiOI) along with the interface defect density. Furthermore, the series and shunt resistance of the device is optimized. Additionally, the performance of the optimized device is investigated under different WLED light intensities. Finally, after optimizing the device under WLED illumination, the best performance parameters achieved are J $_{\text{sc}}$ : 1.83 mA/cm $^{\text{2}}$ , V $_{\text{oc}}$ : 1.33 V, FF: 85.91%, and PCE: 40%. Moreover, the optimized device performance under different indoor light sources: WLED, halogen, and compact fluorescent lamps (CFLs), has been performed to estimate the performance under widely utilized lighting sources.


  • Open Access

    A Comprehensive RF Characterization and Modeling Methodology for the 5nm Technology Node FinFETs

    by Shivendra Singh Parihar, Ahtisham Pampori, Praveen Dwivedi, Jun Huang, Weike Wang, Kimihiko Imura, Chenming Hu, Yogesh Singh Chauhan

    This paper aims to provide insights into the thermal, analog, and RF attributes, as well as a novel modeling methodology, for the FinFET at the industry standard 5nm CMOS technology node. Thermal characterization shows that for a 165K change in temperature, the Sub-threshold Slope (SS) and threshold voltage vary by 69 % and 70 mV, respectively. At room temperature, a single gate contacted n-FinFET RF device exhibits a cutoff and maximum oscillation frequency of 100 GHz and 170 GHz, respectively. Analog and RF Figures of Merit (FoMs) for 5 nm technology at a device level and their temperature sensitivity are also reported. The industry standard BSIM-CMG model is modified to capture the impact of self-heating (SH) and parasitics. The SH model is based on measured data, and the modeling approach renders it independent of other model parameters. To the authors’ knowledge, an iteration free approach to develop a model-card for RF applications is explained for the very first time. Excellent agreement between the measured data and the model indicates that our methodology is accurate and can be used for faster PDK development.


  • Numerical Simulation: Design of High-Efficiency Planar p-n Homojunction Perovskite Solar Cells

    by Brajendra S. Sengar, Vivek Garg, Amitesh Kumar, Praveen Dwivedi

    Perovskite-based solar cells with planar configuration have been perceived as an alternative and attractive option for photovoltaic technology due to high power conversion efficiency (PCE). The performance of heterojunction-based devices is hindered by the recombination in the perovskite layers. The homojunction is suitable for further improvement in PCE due to the built-in electric field, which will enhance the transport of photogenerated charge carriers, therefore, reducing recombination losses. A detailed analysis of the homojunction-based device is needed for further improvement in PCE. In this study, the planar homojunction perovskite photovoltaic device has been simulated by solar cell capacitance simulator (SCAPS). Simulation analysis shows the dependence of PCE on the thickness and defects of the perovskite layer. Recombination analysis at the different junctions has been simulated using hypothetical interface layers at the respective junctions. It has been revealed that the interface defects influence the device performance. The proposed MAPbI₃ homojunction-based devices have achieved more than 23% PCE, which is significantly higher than the existing planar heterojunction-based devices.


  • A New Simulation Approach of Transient Response to Enhance the Selectivity and Sensitivity in Tunneling Field Effect Transistor-Based Biosensor

    by Praveen Dwivedi, Rohit Singh, Brajendra Singh Sengar, Amitesh Kumar, Vivek Garg

    In this work, a new simulation approach of transient analysis on single cavity dielectric-modulated (DM) p-type of tunnel field-effect transistor (TFET) is examined for biosensing applications. The device operation and performance are investigated using the 2D device simulator and results are well-calibrated with experimental data. In this work, we have examined DC transfer characteristics, the transient response of drain current, drain current sensitivity (S), and selectivity (ΔS). Focussing more on the transient results, we have obtained maximum sensitivity of orders greater than 108 for APTES biomolecule with respect to air and a significant selectivity value in orders of 103 for APTES with respect to Biotin biomolecule. The performance of the device in terms of selectivity can be further improved (~104) by optimizing the back-gate bias, and therefore, the impact of back-gate bias has been analysed. The results for charged biomolecules and partially filled cavity are further investigated & highlighted. The DM p-TFET biosensor shows a significant improvement in the results with the transient response for biosensing applications with the feasibility of operating at low voltages (gate voltage of -2.0 V, drain voltage of -0.5 V and back gate voltage 0 to 0.5 V).


  • Crossing the Nernst Limit (59 mV/pH) of Sensitivity Through Tunneling Transistor-Based Biosensor

    by Praveen Dwivedi, Rohit Singh, Yogesh Singh Chauhan

    In this work, an underlap structure of tunneling field-effect transistor (TFET) containing electrolyte/watery solution is examined to enhance the Nernst limit (59 mV/pH) of sensitivity. After incorporating the electrolyte medium in TFET, effect of pH variation on device characteristics such as drain current vs front gate voltage, voltage sensitivity, and current sensitivity are investigated. The interface charge density at the oxide-silicon interface of TFET is obtained as a function of electrolyte pH from physics-based modelling. Voltage sensitivity value ~180 mV/pH that is greater than three times of Nernst limit of 59 mV/pH and current sensitivity value that is more than one decade per pH are observed for TFET based sensor. In order to validate the results, models used in TFET are well-calibrated with experimental data and the result of TFET are compared with inversion mode (IM) device. Results show that TFET gives superior performance than IM device; hence an underlap TFET can be a promising alternative for the next generation biosensor.


  • Overcoming Biomolecule Location-Dependent Sensitivity Degradation Through Point and Line Tunneling in Dielectric Modulated Biosensors

    by Praveen Dwivedi, Abhinav Kranti

    In this work, we report on utility of pocket Tunnel Field Effect Transistors (TFETs) for use as Dielectric Modulated (DM) biosensor. It is shown that incorporation of a pocket doping in the source facilitates lateral as well as vertical tunneling which allows biomolecules located at various positions within the cavity to cause a detectable shift in current-voltage characteristics. Considering realistic cases pertaining to varied locations of biomolecules within the cavity and low fill-in (50%) factor, pocket TFET shows enhanced sensitivity over conventional TFET, which can be further improved by lowering the pocket doping. Sensitivity of a pocket TFET maintains detectable values over a wide range of biomolecule locations within the cavity, thereby showing potential for next generation transistor based biosensor.