Felipe Lopes da Silva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Felipe Lopes da Silva has a total of 116 co-authors. Here are the top co-authors by number of shared publications:
- Laércio Junio da Silva
Universidade Federal de Viçosa
6 shared publications - Dalton de Oliveira Ferreira
Universidade Federal de Viçosa
5 shared publications - Marcos Deon Vilela de Resende
Empresa Brasileira de Pesquisa Agropecuária
4 shared publications - Martha Freire da Silva
Laboratory of Plant Tissue Culture, School of Engineering, São Paulo State University (UNESP), Ilha Solteira 15385-007, Brazil
4 shared publications - Moysés Nascimento
Federal University of Viçosa Department of Statistics Viçosa, Minas Gerais, Brazil
4 shared publications - Ana Carolina Campana Nascimento
Department of Statistics, Federal University of Viçosa, Viçosa 36570-900, MG, Brazil
3 shared publications
Latest Publications
- Open Access
Using Structural Equation Models to Interpret Genome-Wide Association Studies for Morphological and Productive Traits in Soybean [Glycine max (L.) Merr.]
Understanding trait relationships is fundamental in soybean breeding because the goal is to maximize simultaneous gains. Standard multi-trait genome-wide association studies (MT-GWAS) identify variants linked to multiple traits but fail to capture phenotypic structures or interrelations. Structural Equation Models (SEM) account for covariances and recursion, enabling the decomposition of single nucleotide polymorphism (SNP) effects into direct or indirect components and identifying pleiotropic regions. We applied SEM to analyze morphology (pod thickness, PT) and yield traits (number of pods, NP; number of grains, NG; hundred-grain weight, HGW). The dataset comprised 96 soybean individuals genotyped with 4070 SNP markers. The phenotypic network was constructed using the hill-climbing algorithm, a class of score-based methods commonly applied to learn the structure of Bayesian networks, and structural coefficients were estimated with SEM. According to coefficient signs, we identified negative interrelationships between NG and HGW, and positive ones between NP and NG, and HGW and PT. NG, HGW, and PT showed indirect SNP effects. We also found loci jointly controlling traits. In total, 46 candidate genes were identified: 7 associated exclusively with NP and 4 associated with NG. An additional 15 genes were common to NP and NG, 3 were common to NP and HGW, 6 were common to NG and HGW, and 11 were common to NP, NG, and HGW. In summary, SEM-GWAS revealed novel relationships among soybean traits, including PT, supporting breeding programs.
Open AccessUsing Structural Equation Models to Interpret Genome-Wide Association Studies for Morphological and Productive Traits in Soybean [Glycine max (L.) Merr.]
Understanding trait relationships is fundamental in soybean breeding because the goal is to maximize simultaneous gains. Standard multi-trait genome-wide association studies (MT-GWAS) identify variants linked to multiple traits but fail to capture phenotypic structures or interrelations. Structural Equation Models (SEM) account for covariances and recursion, enabling the decomposition of single nucleotide polymorphism (SNP) effects into direct or indirect components and identifying pleiotropic regions. We applied SEM to analyze morphology (pod thickness, PT) and yield traits (number of pods, NP; number of grains, NG; hundred-grain weight, HGW). The dataset comprised 96 soybean individuals genotyped with 4070 SNP markers. The phenotypic network was constructed using the hill-climbing algorithm, a class of score-based methods commonly applied to learn the structure of Bayesian networks, and structural coefficients were estimated with SEM. According to coefficient signs, we identified negative interrelationships between NG and HGW, and positive ones between NP and NG, and HGW and PT. NG, HGW, and PT showed indirect SNP effects. We also found loci jointly controlling traits. In total, 46 candidate genes were identified: 7 associated exclusively with NP and 4 associated with NG. An additional 15 genes were common to NP and NG, 3 were common to NP and HGW, 6 were common to NG and HGW, and 11 were common to NP, NG, and HGW. In summary, SEM-GWAS revealed novel relationships among soybean traits, including PT, supporting breeding programs.
- Open Access
- 28 October 2024
- Published by Elsevier in Smart Agricultural Technology
- Vol. 9
Leveraging leaf spectroscopy to identify drought-tolerant soybean cultivars
- 28 October 2024
- Published by Elsevier in Smart Agricultural Technology
- Vol. 9
Open AccessLeveraging leaf spectroscopy to identify drought-tolerant soybean cultivars
- 17 June 2024
- Published by Springer Nature in Journal of Agricultural, Biological and Environmental Statistics
- Vol. 30 (4) , 887-902
Impact of the Removal of Genotypes on the Formation of Mega-Environments Based on GGE Biplots Analysis
- 17 June 2024
- Published by Springer Nature in Journal of Agricultural, Biological and Environmental Statistics
- Vol. 30 (4) , 887-902
Impact of the Removal of Genotypes on the Formation of Mega-Environments Based on GGE Biplots Analysis
- Open Access
- 5 April 2024
- Published by MDPI AG in International Journal of Plant Biology
- Vol. 15 (2) , 242-252
Genomic Prediction of Root Traits via Aerial Traits in Soybean Using Canonical Variables
The phenotypic evaluation of root traits in soybeans presents challenges in breeding due to its high cost and the requirement for experimental plot destruction. Establishing relationships between aerial and root traits is crucial, given the relative ease of phenotypic evaluations for aerial traits. Therefore, this study aims to utilize the canonical correlation technique to estimate latent variables, subsequently employing GBLUP for the genomic prediction of the root traits (length, volume, surface area, and dry mass) using phenotypic information from aerial part traits (hypocotyl diameter and dry mass). Our results demonstrate the effectiveness of the technique in predicting the root part, even when not directly evaluated. The agreement observed between the top 10% of individuals selected based on the canonical variable and each root trait individually was considered moderate or substantial. This enables the simultaneous selection of genotypes based on both trait groups, providing a valuable approach for soybean breeding programs.
- 5 April 2024
- Published by MDPI AG in International Journal of Plant Biology
- Vol. 15 (2) , 242-252
Open AccessGenomic Prediction of Root Traits via Aerial Traits in Soybean Using Canonical Variables
The phenotypic evaluation of root traits in soybeans presents challenges in breeding due to its high cost and the requirement for experimental plot destruction. Establishing relationships between aerial and root traits is crucial, given the relative ease of phenotypic evaluations for aerial traits. Therefore, this study aims to utilize the canonical correlation technique to estimate latent variables, subsequently employing GBLUP for the genomic prediction of the root traits (length, volume, surface area, and dry mass) using phenotypic information from aerial part traits (hypocotyl diameter and dry mass). Our results demonstrate the effectiveness of the technique in predicting the root part, even when not directly evaluated. The agreement observed between the top 10% of individuals selected based on the canonical variable and each root trait individually was considered moderate or substantial. This enables the simultaneous selection of genotypes based on both trait groups, providing a valuable approach for soybean breeding programs.
- 25 March 2024
- Published by Wiley in Journal of Agronomy and Crop Science
- Vol. 210 (2) , e12699
Performance of seedlings and yield of soybean genotypes under soil compaction
The identification of soybean genotypes tolerant to soil compaction makes it possible to reduce productivity loss under stress conditions. Added to this, the prior selection of these genotypes will result in greater assertiveness in the positioning of cultivars in the field. Thus, the objective was to evaluate the susceptibility of soybean genotypes to compaction in greenhouse and field conditions; verify which characteristics of seedlings under high resistance to root penetration are correlated with crop production in compacted soil; and to validate the substrate mechanical impedance method for evaluating the susceptibility of plant genotypes to soil compaction. Seeds of 20 genotypes were sown in a substrate mechanical impedance system under controlled conditions. The characteristics evaluated were total root length, total root surface area, mean root diameter, total root volume, taproot length, shoot length, root dry matter and seedling shoot dry matter. In the field experiment, half of the planting area was compacted, constituting two treatments, soil with and without compaction. The percentage of seedling emergence, initial plant height, stem diameter, number of nodes, internode length, number of lateral branches, shoot dry matter, final plant height, absolute and relative growth rate, number of pods, weight of 100 seeds and grain yield. In addition, the number of days between soybean sowing until plant flowering and grain harvest was recorded according to genotype and soil compaction level. In a controlled environment, genotypes tolerant to soil compaction show greater plasticity of root characteristics and smaller alterations in the shoot of seedlings. In the field, these genotypes show smaller reductions in growth rate, height, number of pods and grain yield. The shoot dry matter and the root dry matter of soybean seedlings in a mechanical impedance system present a positive and negative correlation, respectively, with soybean yield in compacted soil, indicating that the genetically determined susceptibility to soil compaction stress was similar throughout ontogenesis. The substrate mechanical impedance system used to evaluate the performance of soybean seedlings under stress, facilitates the decision‐making in breeding programs focused on identifying genotypes expressing soil compaction tolerance.
- 25 March 2024
- Published by Wiley in Journal of Agronomy and Crop Science
- Vol. 210 (2) , e12699
Performance of seedlings and yield of soybean genotypes under soil compaction
The identification of soybean genotypes tolerant to soil compaction makes it possible to reduce productivity loss under stress conditions. Added to this, the prior selection of these genotypes will result in greater assertiveness in the positioning of cultivars in the field. Thus, the objective was to evaluate the susceptibility of soybean genotypes to compaction in greenhouse and field conditions; verify which characteristics of seedlings under high resistance to root penetration are correlated with crop production in compacted soil; and to validate the substrate mechanical impedance method for evaluating the susceptibility of plant genotypes to soil compaction. Seeds of 20 genotypes were sown in a substrate mechanical impedance system under controlled conditions. The characteristics evaluated were total root length, total root surface area, mean root diameter, total root volume, taproot length, shoot length, root dry matter and seedling shoot dry matter. In the field experiment, half of the planting area was compacted, constituting two treatments, soil with and without compaction. The percentage of seedling emergence, initial plant height, stem diameter, number of nodes, internode length, number of lateral branches, shoot dry matter, final plant height, absolute and relative growth rate, number of pods, weight of 100 seeds and grain yield. In addition, the number of days between soybean sowing until plant flowering and grain harvest was recorded according to genotype and soil compaction level. In a controlled environment, genotypes tolerant to soil compaction show greater plasticity of root characteristics and smaller alterations in the shoot of seedlings. In the field, these genotypes show smaller reductions in growth rate, height, number of pods and grain yield. The shoot dry matter and the root dry matter of soybean seedlings in a mechanical impedance system present a positive and negative correlation, respectively, with soybean yield in compacted soil, indicating that the genetically determined susceptibility to soil compaction stress was similar throughout ontogenesis. The substrate mechanical impedance system used to evaluate the performance of soybean seedlings under stress, facilitates the decision‐making in breeding programs focused on identifying genotypes expressing soil compaction tolerance.
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Pesquisa Agropecuária Brasileira
- Vol. 59, e03557
Incorporating prior knowledge into Bayesian models for genetic evaluation in soybean breeding
The objective of this work was to compare the use of noninformative and informative priors in Bayesian models, as well as to evaluate the viability of including informative priors in the estimation of variance components and genetic values in soybean breeding programs. The used phenotypic data refer to the evaluation of 80 soybean genotypes in ten environments over three years. For each evaluated crop year, informative and noninformative priors were used, and the parameters were estimated using the Gibbs sampler algorithm. Parameter estimates from the previous crop year were used as prior information for the next evaluated crop year. The goodness-of-fit was calculated using the deviance information criterion (DIC). Selective accuracy showed the highest values for the models chosen through DIC for both crop years. However, the intervals of the highest posterior density are narrower for all models that adopted informative priors. Adding information into Bayesian inference does not always result in a better model fitting.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Pesquisa Agropecuária Brasileira
- Vol. 59, e03557
Open AccessIncorporating prior knowledge into Bayesian models for genetic evaluation in soybean breeding
The objective of this work was to compare the use of noninformative and informative priors in Bayesian models, as well as to evaluate the viability of including informative priors in the estimation of variance components and genetic values in soybean breeding programs. The used phenotypic data refer to the evaluation of 80 soybean genotypes in ten environments over three years. For each evaluated crop year, informative and noninformative priors were used, and the parameters were estimated using the Gibbs sampler algorithm. Parameter estimates from the previous crop year were used as prior information for the next evaluated crop year. The goodness-of-fit was calculated using the deviance information criterion (DIC). Selective accuracy showed the highest values for the models chosen through DIC for both crop years. However, the intervals of the highest posterior density are narrower for all models that adopted informative priors. Adding information into Bayesian inference does not always result in a better model fitting.
- 1 January 2024
- Published by GN1 Sistemas e Publicacoes Ltd. in Revista Ciência Agronômica
- Vol. 55, 1-13
Near infrared spectroscopy for the classification of vigor level of soybean seed
This work aimed at investigating the viability of near infrared spectrometry (NIR), associated with chemometric methods, in order to identify differences at the levels of vigor of naturally and artificially aged soybean seeds. Seeds of six soybean genotypes were analyzed when freshly harvested, after natural aging in storage for eight months, and after artificial aging at the temperature of 41 °C for 96 hours. The seed moisture content, germination potential and vigor were evaluated. Also, there were measured the content of protein, oil and of the fatty acids: palmitic, stearic, oleic, linoleic and linolenic. The NIR spectra were obtained from the freeze-dried and grinded seeds. The natural and artificial aging of the seeds promote deterioration at distinct levels, reflecting in differences in seed vigor. The regions of the electromagnetic spectrum between wavelengths of 1000-1200 nm, 1350-1450 nm, 1800-1900 nm and 2300-2400 nm are important to distinguish the levels of quality of the soybean seeds. The contents of oil and protein have a relationship with the physiological quality of the seeds. Also, the most relevant wavelengths for the classification of seed vigor present a relationship with these compounds. NIR spectroscopy, in combination with chemometric methods, presents potential to be used in the classification of soybean seeds regarding their physiological quality.
- 1 January 2024
- Published by GN1 Sistemas e Publicacoes Ltd. in Revista Ciência Agronômica
- Vol. 55, 1-13
Near infrared spectroscopy for the classification of vigor level of soybean seed
This work aimed at investigating the viability of near infrared spectrometry (NIR), associated with chemometric methods, in order to identify differences at the levels of vigor of naturally and artificially aged soybean seeds. Seeds of six soybean genotypes were analyzed when freshly harvested, after natural aging in storage for eight months, and after artificial aging at the temperature of 41 °C for 96 hours. The seed moisture content, germination potential and vigor were evaluated. Also, there were measured the content of protein, oil and of the fatty acids: palmitic, stearic, oleic, linoleic and linolenic. The NIR spectra were obtained from the freeze-dried and grinded seeds. The natural and artificial aging of the seeds promote deterioration at distinct levels, reflecting in differences in seed vigor. The regions of the electromagnetic spectrum between wavelengths of 1000-1200 nm, 1350-1450 nm, 1800-1900 nm and 2300-2400 nm are important to distinguish the levels of quality of the soybean seeds. The contents of oil and protein have a relationship with the physiological quality of the seeds. Also, the most relevant wavelengths for the classification of seed vigor present a relationship with these compounds. NIR spectroscopy, in combination with chemometric methods, presents potential to be used in the classification of soybean seeds regarding their physiological quality.
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Journal of Seed Science
- Vol. 46, e202446001
Artificial aging for predicting the storability of soybean seeds via GGE biplot
Creation, adjustments and adoption of tests and tools that help in the prediction of seed storability have been highly demanded. Therefore, this work aimed to analyze the efficiency of different artificial aging times in predicting the performance of soybean seeds after storage, using the GGE biplot method. Seeds of six genotypes were subjected to storage, under refrigerated and non-refrigerated conditions, and artificial aging, being artificially aged for periods of 0, 48, 96 and 144 hours. Seeds freshly harvested and after natural and artificial aging were subjected to germination and vigor tests. The experiments were analyzed separately, using means test, regression analysis and model identity test, and together, using the GGE biplot method. Artificial aging at a temperature of 41 °C for 96 hours has the potential to be used to predict the performance of soybean seeds after eight months of storage. The GGE biplot is a method that can be used as a tool to analyze the relationships between aging environments and visualize the ranking of genotypes regarding the performance of seeds subjected to natural and artificial aging.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Journal of Seed Science
- Vol. 46, e202446001
Open AccessArtificial aging for predicting the storability of soybean seeds via GGE biplot
Creation, adjustments and adoption of tests and tools that help in the prediction of seed storability have been highly demanded. Therefore, this work aimed to analyze the efficiency of different artificial aging times in predicting the performance of soybean seeds after storage, using the GGE biplot method. Seeds of six genotypes were subjected to storage, under refrigerated and non-refrigerated conditions, and artificial aging, being artificially aged for periods of 0, 48, 96 and 144 hours. Seeds freshly harvested and after natural and artificial aging were subjected to germination and vigor tests. The experiments were analyzed separately, using means test, regression analysis and model identity test, and together, using the GGE biplot method. Artificial aging at a temperature of 41 °C for 96 hours has the potential to be used to predict the performance of soybean seeds after eight months of storage. The GGE biplot is a method that can be used as a tool to analyze the relationships between aging environments and visualize the ranking of genotypes regarding the performance of seeds subjected to natural and artificial aging.
- 15 December 2023
- Published by Springer Nature in Euphytica
- Vol. 220 (1) , 1-12
Envirotype approach for soybean genotype selection through the integration of georeferenced climate and genetic data using artificial neural networks
- 15 December 2023
- Published by Springer Nature in Euphytica
- Vol. 220 (1) , 1-12
Envirotype approach for soybean genotype selection through the integration of georeferenced climate and genetic data using artificial neural networks
- Open Access
- 17 October 2023
- Published by Universidade Estadual de Maringa in Acta Scientiarum. Agronomy
- Vol. 46 (1) , e67040
Soybean crop yield estimation using artificial intelligence techniques
It is common to observe conventional methods for estimating soybean crop yields, making the process slow and susceptible to human error. Therefore, the objective was to develop a model based on deep learning to estimate soybean yield using digital images obtained through a smartphone. To do this, the ability of the proposed model to correctly classify pods that have different numbers of grains, count the number of pods and grains, and then estimate the soybean crop yield was analyzed. As part of the study, two types of image acquisition were performed for the same plant. Image acquisition 1 (IA1) included capturing the images of the entire plant, pods, leaves, and branches. Image acquisition 2 (IA2) included capturing the images of the pods removed from the plant and deposited in a white container. In both acquisition methods, two soybean cultivars, TMG 7063 Ipro and TMG 7363 RR, were used. In total, combining samples from both cultivars, 495 images were captured, with each image corresponding to a sample (plant) obtained through methods AI1 and AI2. With these images, the total number of pods in the entire dataset was 46,385 pods. For the training and validation of the model, the data was divided into subsets of training, validation, and testing, representing, respectively, 80, 10, and 10% of the total dataset. In general, when using the data from IA2, the model presented errors of 7.50 and 5.32% for pods and grains, respectively. These values are considerably lower than when the model used the IA1 data, where it presented errors of 34.69 and 35.25% for pod and grain counts, respectively. Therefore, the data used from IA2 provide better results to the model.
- 17 October 2023
- Published by Universidade Estadual de Maringa in Acta Scientiarum. Agronomy
- Vol. 46 (1) , e67040
Open AccessSoybean crop yield estimation using artificial intelligence techniques
It is common to observe conventional methods for estimating soybean crop yields, making the process slow and susceptible to human error. Therefore, the objective was to develop a model based on deep learning to estimate soybean yield using digital images obtained through a smartphone. To do this, the ability of the proposed model to correctly classify pods that have different numbers of grains, count the number of pods and grains, and then estimate the soybean crop yield was analyzed. As part of the study, two types of image acquisition were performed for the same plant. Image acquisition 1 (IA1) included capturing the images of the entire plant, pods, leaves, and branches. Image acquisition 2 (IA2) included capturing the images of the pods removed from the plant and deposited in a white container. In both acquisition methods, two soybean cultivars, TMG 7063 Ipro and TMG 7363 RR, were used. In total, combining samples from both cultivars, 495 images were captured, with each image corresponding to a sample (plant) obtained through methods AI1 and AI2. With these images, the total number of pods in the entire dataset was 46,385 pods. For the training and validation of the model, the data was divided into subsets of training, validation, and testing, representing, respectively, 80, 10, and 10% of the total dataset. In general, when using the data from IA2, the model presented errors of 7.50 and 5.32% for pods and grains, respectively. These values are considerably lower than when the model used the IA1 data, where it presented errors of 34.69 and 35.25% for pod and grain counts, respectively. Therefore, the data used from IA2 provide better results to the model.