Ahmed Al-Tahmeesschi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ahmed Al-Tahmeesschi has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Hamed Ahmadi
University of York
5 shared publications - Berk Canberk
School of Computing, Engineering and Built Environment, Edinburgh Napier University, Edinburgh, U.K.
3 shared publications - Janne J. Lehtomaki
Faculty of Information Technology and Electrical Engineering, University of Oulu, Oulu, Finland
3 shared publications - Kenta Umebayashi
Institute of Engineering, Tokyo University of Agriculture and Technology, Tokyo, Japan
3 shared publications - Miguel López-Benítez
University of Liverpool
3 shared publications - Avishek Nag
School of Computer Science, University College Dublin, Dublin, Ireland
2 shared publications
Latest Publications
- 2 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Green Communications and Networking
- Vol. 10, 2710-2722
Scalable Machine Learning-Based Approaches for Energy Saving in Densely Deployed Open RAN
Densely deployed base stations are responsible for the majority of the energy consumed in Radio access network (RAN). While these deployments are crucial to deliver the required data rate in busy hours of the day, the network can save energy by switching some of them to sleep mode and maintain the coverage and quality of service with the other ones. Benefiting from the flexibility provided by the Open RAN in embedding machine learning (ML) in network operations, in this work we propose Deep Reinforcement Learning (DRL)-based energy saving solutions. Firstly we propose 3 different DRL-based methods in the form of xApps which control the Active/Sleep mode of up to 6 radio units (RUs) from Near Real time RAN Intelligent Controller (RIC). We also propose a further scalable federated DRL-based solution with an aggregator as an rApp in None Real time RIC and local agents as xApps. Our simulation results present the convergence of the proposed methods. We also compare the performance of our federated DRL across three layouts spanning 6–24 RUs and 500–1000m regions, including a composite multi-region scenario. The results show that our proposed federated TD3 algorithm achieves up to 43.75% faster convergence, more than 50% network energy saving and 37. 4% lower training energy versus centralized baselines, while maintaining the quality of service and improving the robustness of the policy.
- 2 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Green Communications and Networking
- Vol. 10, 2710-2722
Scalable Machine Learning-Based Approaches for Energy Saving in Densely Deployed Open RAN
Densely deployed base stations are responsible for the majority of the energy consumed in Radio access network (RAN). While these deployments are crucial to deliver the required data rate in busy hours of the day, the network can save energy by switching some of them to sleep mode and maintain the coverage and quality of service with the other ones. Benefiting from the flexibility provided by the Open RAN in embedding machine learning (ML) in network operations, in this work we propose Deep Reinforcement Learning (DRL)-based energy saving solutions. Firstly we propose 3 different DRL-based methods in the form of xApps which control the Active/Sleep mode of up to 6 radio units (RUs) from Near Real time RAN Intelligent Controller (RIC). We also propose a further scalable federated DRL-based solution with an aggregator as an rApp in None Real time RIC and local agents as xApps. Our simulation results present the convergence of the proposed methods. We also compare the performance of our federated DRL across three layouts spanning 6–24 RUs and 500–1000m regions, including a composite multi-region scenario. The results show that our proposed federated TD3 algorithm achieves up to 43.75% faster convergence, more than 50% network energy saving and 37. 4% lower training energy versus centralized baselines, while maintaining the quality of service and improving the robustness of the policy.
- Open Access
- 14 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 210117-210133
Analysis of Coverage Probability in 6G Millimeter-Wave Cellular Networks: Impact of Alignment Information Availability
Beam alignment remains a fundamental challenge in millimeter wave (mmWave) communication systems due to their high directionality and sensitivity to angular misalignment. Prior works commonly model alignment errors using a truncated Gaussian distribution with fixed angular boundaries and either an arbitrarily chosen standard deviation or one derived from the Cramér-Rao lower bound (CRLB). Although CRLB-based models provide valuable analysis of specific misalignment scenarios, their reliance on estimator-specific variance assumptions limits the representation of the full range of alignment uncertainty. To address this, we propose a unified probabilistic beam alignment error model based on a novel alignment information parameter, an abstract parameter quantifying directional knowledge availability in the system. This parameter governs both the variance and truncation boundaries of the alignment error distribution, enabling a continuous representation that transitions between a uniform distribution (no directional knowledge), truncated Gaussian (partial knowledge), and a distribution approaching a Dirac delta function (near-perfect knowledge). The model also incorporates a hardware inefficiency factor that, together with the information parameter, controls the error variance. We derive an analytical expression for downlink coverage probability using stochastic geometry and validate it via Monte Carlo simulations. Our alignment-aware model reveals trade-offs between beamwidth configurations and alignment information availability: wide beams are preferable under scarce information, medium beams perform best with moderate information, and narrow beams excel only when alignment information is near-perfect. These findings provide guidance for beamwidth selection in scenarios where acquiring alignment information is challenging or resource-intensive, supporting robust mmWave system design.
- 14 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 210117-210133
Open AccessAnalysis of Coverage Probability in 6G Millimeter-Wave Cellular Networks: Impact of Alignment Information Availability
Beam alignment remains a fundamental challenge in millimeter wave (mmWave) communication systems due to their high directionality and sensitivity to angular misalignment. Prior works commonly model alignment errors using a truncated Gaussian distribution with fixed angular boundaries and either an arbitrarily chosen standard deviation or one derived from the Cramér-Rao lower bound (CRLB). Although CRLB-based models provide valuable analysis of specific misalignment scenarios, their reliance on estimator-specific variance assumptions limits the representation of the full range of alignment uncertainty. To address this, we propose a unified probabilistic beam alignment error model based on a novel alignment information parameter, an abstract parameter quantifying directional knowledge availability in the system. This parameter governs both the variance and truncation boundaries of the alignment error distribution, enabling a continuous representation that transitions between a uniform distribution (no directional knowledge), truncated Gaussian (partial knowledge), and a distribution approaching a Dirac delta function (near-perfect knowledge). The model also incorporates a hardware inefficiency factor that, together with the information parameter, controls the error variance. We derive an analytical expression for downlink coverage probability using stochastic geometry and validate it via Monte Carlo simulations. Our alignment-aware model reveals trade-offs between beamwidth configurations and alignment information availability: wide beams are preferable under scarce information, medium beams perform best with moderate information, and narrow beams excel only when alignment information is near-perfect. These findings provide guidance for beamwidth selection in scenarios where acquiring alignment information is challenging or resource-intensive, supporting robust mmWave system design.
- 24 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Magazine
- Vol. PP (25763180) , 1-8
Digital Twin-Enhanced Reinforcement Learning for Intelligent xApps Management in O-RAN Systems
Open Radio Access Network (O-RAN) introduces xApps to enable flexible, near real-time control of RAN functions. However, managing multiple xApps dynamically, under rapidly changing network conditions, becomes significantly more challenging in IoT-driven environments, where massive numbers of low-power devices may simultaneously access the network, triggering phenomena such as wake-up storms. In this work, we showcase and compare Digital Twin-enhanced Multi-Agent Reinforcement Learning (MARL) strategies for intelligent xApp management in IoT-enabled O-RAN systems. We explore how Digital Twins can simulate large-scale, event-driven IoT device behaviors, enabling proactive optimization of xApp scheduling while reducing communication and synchronization overhead. We further examine advanced MARL approaches, such as Hierarchical Agent Policy Optimization (HAPPO), to address scalability and coordination challenges under ultra-dense, low-latency, and energy-constrained LPWAN protocols like NB-IoT and LTE-M. We define two system-level KPIs to evaluate the performance of RL schemes: Conflict Avoidance Efficiency and Coordination QoS Improvement. The proposed MARL-based approach significantly outperforms conventional single-agent RL methods in both coordination effectiveness and overall QoS delivery, while maintaining a reasonable model complexity suitable for practical deployment.
- 24 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Magazine
- Vol. PP (25763180) , 1-8
Digital Twin-Enhanced Reinforcement Learning for Intelligent xApps Management in O-RAN Systems
Open Radio Access Network (O-RAN) introduces xApps to enable flexible, near real-time control of RAN functions. However, managing multiple xApps dynamically, under rapidly changing network conditions, becomes significantly more challenging in IoT-driven environments, where massive numbers of low-power devices may simultaneously access the network, triggering phenomena such as wake-up storms. In this work, we showcase and compare Digital Twin-enhanced Multi-Agent Reinforcement Learning (MARL) strategies for intelligent xApp management in IoT-enabled O-RAN systems. We explore how Digital Twins can simulate large-scale, event-driven IoT device behaviors, enabling proactive optimization of xApp scheduling while reducing communication and synchronization overhead. We further examine advanced MARL approaches, such as Hierarchical Agent Policy Optimization (HAPPO), to address scalability and coordination challenges under ultra-dense, low-latency, and energy-constrained LPWAN protocols like NB-IoT and LTE-M. We define two system-level KPIs to evaluate the performance of RL schemes: Conflict Avoidance Efficiency and Coordination QoS Improvement. The proposed MARL-based approach significantly outperforms conventional single-agent RL methods in both coordination effectiveness and overall QoS delivery, while maintaining a reasonable model complexity suitable for practical deployment.
- Top Cited PapersOpen Access
- 27 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 6, 1372-1412
Advancing 6G: Survey for Explainable AI on Communications and Network Slicing
The unprecedented advancement of Artificial Intelligence (AI) has positioned Explainable AI (XAI) as a critical enabler in addressing the complexities of next-generation wireless communications. With the evolution of the 6G networks, characterized by ultra-low latency, massive data rates, and intricate network structures, the need for transparency, interpretability, and fairness in AI-driven decision-making has become more urgent than ever. This survey provides a comprehensive review of the current state and future potential of XAI in communications, with a focus on network slicing, a fundamental technology for resource management in 6G. By systematically categorizing XAI methodologies–ranging from model-agnostic to model-specific approaches, and from pre-model to post-model strategies–this paper identifies their unique advantages, limitations, and applications in wireless communications. Moreover, the survey emphasizes the role of XAI in network slicing for vehicular network, highlighting its ability to enhance transparency and reliability in scenarios requiring real-time decision-making and high-stakes operational environments. Real-world use cases are examined to illustrate how XAI-driven systems can improve resource allocation, facilitate fault diagnosis, and meet regulatory requirements for ethical AI deployment. By addressing the inherent challenges of applying XAI in complex, dynamic networks, this survey offers critical insights into the convergence of XAI and 6G technologies. Future research directions, including scalability, real-time applicability, and interdisciplinary integration, are discussed, establishing a foundation for advancing transparent and trustworthy AI in 6G communications systems.
- 27 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 6, 1372-1412
Top Cited PapersOpen AccessAdvancing 6G: Survey for Explainable AI on Communications and Network Slicing
The unprecedented advancement of Artificial Intelligence (AI) has positioned Explainable AI (XAI) as a critical enabler in addressing the complexities of next-generation wireless communications. With the evolution of the 6G networks, characterized by ultra-low latency, massive data rates, and intricate network structures, the need for transparency, interpretability, and fairness in AI-driven decision-making has become more urgent than ever. This survey provides a comprehensive review of the current state and future potential of XAI in communications, with a focus on network slicing, a fundamental technology for resource management in 6G. By systematically categorizing XAI methodologies–ranging from model-agnostic to model-specific approaches, and from pre-model to post-model strategies–this paper identifies their unique advantages, limitations, and applications in wireless communications. Moreover, the survey emphasizes the role of XAI in network slicing for vehicular network, highlighting its ability to enhance transparency and reliability in scenarios requiring real-time decision-making and high-stakes operational environments. Real-world use cases are examined to illustrate how XAI-driven systems can improve resource allocation, facilitate fault diagnosis, and meet regulatory requirements for ethical AI deployment. By addressing the inherent challenges of applying XAI in complex, dynamic networks, this survey offers critical insights into the convergence of XAI and 6G technologies. Future research directions, including scalability, real-time applicability, and interdisciplinary integration, are discussed, establishing a foundation for advancing transparent and trustworthy AI in 6G communications systems.
- 25 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Network
- Vol. 39 (4) , 235-243
Optimized Resource Allocation for Cloud-Native 6G Networks: Zero-Touch ML Models in Microservices-Based VNF Deployments
6G, the next generation of mobile networks, is set to offer even higher data rates, ultra-reliability, and lower latency than 5G. New 6G services will increase the load and dynamism of the network. Network Function Virtualization (NFV) aids with this increased load and dynamism by eliminating hardware dependency. It aims to boost the flexibility and scalability of network deployment services by separating network functions from their specific proprietary forms so that they can run as virtual network functions (VNFs) on commodity hardware. It is essential to design an NFV orchestration and management framework to support these services. However, deploying bulky monolithic VNFs on the network is difficult, especially when underlying resources are scarce, resulting in ineffective resource management. To address this, microservices-based NFV approaches are proposed. In this approach, monolithic VNFs are decomposed into ‘micro’ VNFs, increasing the likelihood of their successful placement and resulting in more efficient resource management. This article discusses the proposed framework for resource allocation for microservices-based services to provide end-to-end Quality of Service (QoS) using the Double Deep Q Learning (DDQL) approach. Furthermore, to enhance this resource allocation approach, we discussed and addressed two crucial sub-problems: the need for a dynamic priority technique and the presence of the low-priority starvation problem. Using the Deep Deterministic Policy Gradient (DDPG) model, an Adaptive Scheduling model is developed that effectively mitigates the starvation problem. Additionally, the impact of incorporating traffic load considerations into deployment and scheduling is thoroughly investigated.
- 25 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Network
- Vol. 39 (4) , 235-243
Optimized Resource Allocation for Cloud-Native 6G Networks: Zero-Touch ML Models in Microservices-Based VNF Deployments
6G, the next generation of mobile networks, is set to offer even higher data rates, ultra-reliability, and lower latency than 5G. New 6G services will increase the load and dynamism of the network. Network Function Virtualization (NFV) aids with this increased load and dynamism by eliminating hardware dependency. It aims to boost the flexibility and scalability of network deployment services by separating network functions from their specific proprietary forms so that they can run as virtual network functions (VNFs) on commodity hardware. It is essential to design an NFV orchestration and management framework to support these services. However, deploying bulky monolithic VNFs on the network is difficult, especially when underlying resources are scarce, resulting in ineffective resource management. To address this, microservices-based NFV approaches are proposed. In this approach, monolithic VNFs are decomposed into ‘micro’ VNFs, increasing the likelihood of their successful placement and resulting in more efficient resource management. This article discusses the proposed framework for resource allocation for microservices-based services to provide end-to-end Quality of Service (QoS) using the Double Deep Q Learning (DDQL) approach. Furthermore, to enhance this resource allocation approach, we discussed and addressed two crucial sub-problems: the need for a dynamic priority technique and the presence of the low-priority starvation problem. Using the Deep Deterministic Policy Gradient (DDPG) model, an Adaptive Scheduling model is developed that effectively mitigates the starvation problem. Additionally, the impact of incorporating traffic load considerations into deployment and scheduling is thoroughly investigated.
- Open Access
- 2 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 149883-149893
High-Efficiency FCME-Based Noise Power Estimation for Long-Term and Wide-Band Spectrum Measurements
Statistics in terms of spectrum occupancy are useful for efficient and smart dynamic spectrum sharing, and the statistics can be obtained by long-term and wide-band spectrum measurements. In this paper, we investigate noise floor (NF) estimation for energy detection (ED)-based long-term and wideband spectrum measurements since the NF estimation heavily affects the ED performance and eventually the accuracy of the statistics in terms of spectrum occupancy. Specifically, we address the following NF estimation problems simultaneously for the first time in the spectrum measurement field: (1) slow timevarying property of the NF, (2) frequency dependency of the NF, (3) the NF estimation in the presence of the signal, and (4) the computational cost of the NF estimation. Firstly, we apply Forward consecutive mean excision (FCME) algorithm-based NF estimation to deal with the above three problems ((1), (2) and (3)) successfully. Second, we propose and apply an NF level change detection on top of the FCME algorithm-based NF estimation to deal with the fourth problem. The proposed NF level change detection exploits the slow time-varying property of the NF. Specifically, only if the significant NF level change is detected, the FCME algorithm-based NF estimation is performed to reduce the redundant NF estimations. In numerical evaluations, we show the efficiency and the validity of the NF level change detection for the NF estimation problems, and compare the NF estimation performance with the method without the NF level change detection.
- 2 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 149883-149893
Open AccessHigh-Efficiency FCME-Based Noise Power Estimation for Long-Term and Wide-Band Spectrum Measurements
Statistics in terms of spectrum occupancy are useful for efficient and smart dynamic spectrum sharing, and the statistics can be obtained by long-term and wide-band spectrum measurements. In this paper, we investigate noise floor (NF) estimation for energy detection (ED)-based long-term and wideband spectrum measurements since the NF estimation heavily affects the ED performance and eventually the accuracy of the statistics in terms of spectrum occupancy. Specifically, we address the following NF estimation problems simultaneously for the first time in the spectrum measurement field: (1) slow timevarying property of the NF, (2) frequency dependency of the NF, (3) the NF estimation in the presence of the signal, and (4) the computational cost of the NF estimation. Firstly, we apply Forward consecutive mean excision (FCME) algorithm-based NF estimation to deal with the above three problems ((1), (2) and (3)) successfully. Second, we propose and apply an NF level change detection on top of the FCME algorithm-based NF estimation to deal with the fourth problem. The proposed NF level change detection exploits the slow time-varying property of the NF. Specifically, only if the significant NF level change is detected, the FCME algorithm-based NF estimation is performed to reduce the redundant NF estimations. In numerical evaluations, we show the efficiency and the validity of the NF level change detection for the NF estimation problems, and compare the NF estimation performance with the method without the NF level change detection.
- Open Access
- 11 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 85645-85660
Feature-Based Deep Neural Networks for Short-Term Prediction of WiFi Channel Occupancy Rate
Spectrum occupancy prediction is a key enabling technology to facilitate a proactive resource allocation for dynamic spectrum management systems. This work focuses on the prediction of duty cycle (DC) metric that reflects spectrum usage (in the time domain). The spectrum usage is typically measured on a shorter time scale than needed for prediction. Hence, data thinning is required and we apply block averaging. However, averaging operation results in flattening the DC data and losing essential features to assist deep neural network (DNN) to predict the spectrum usage. To improve DC prediction after block averaging, a feature-based deep learning framework is proposed. Namely, long short-term memory (LSTM) and gated recurrent unit (GRU) are selected and enhanced by using features of the data, such as the variance of DC data in addition to DC data themself. The proposed model is capable of proactively predicting the spectrum usage by capturing complex relationships among various input features for the measured spectrum, thus providing higher prediction accuracy with an average improvement of 5% in RMSE compared with traditional models. Moreover, to have a better understanding of the proposed model, we quantify the effect of input features on the predicted spectrum usage values. Based on the most significant input features, a simpler and more efficient model is proposed to estimate DC with similar accuracy to when using all features.
- 11 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 85645-85660
Open AccessFeature-Based Deep Neural Networks for Short-Term Prediction of WiFi Channel Occupancy Rate
Spectrum occupancy prediction is a key enabling technology to facilitate a proactive resource allocation for dynamic spectrum management systems. This work focuses on the prediction of duty cycle (DC) metric that reflects spectrum usage (in the time domain). The spectrum usage is typically measured on a shorter time scale than needed for prediction. Hence, data thinning is required and we apply block averaging. However, averaging operation results in flattening the DC data and losing essential features to assist deep neural network (DNN) to predict the spectrum usage. To improve DC prediction after block averaging, a feature-based deep learning framework is proposed. Namely, long short-term memory (LSTM) and gated recurrent unit (GRU) are selected and enhanced by using features of the data, such as the variance of DC data in addition to DC data themself. The proposed model is capable of proactively predicting the spectrum usage by capturing complex relationships among various input features for the measured spectrum, thus providing higher prediction accuracy with an average improvement of 5% in RMSE compared with traditional models. Moreover, to have a better understanding of the proposed model, we quantify the effect of input features on the predicted spectrum usage values. Based on the most significant input features, a simpler and more efficient model is proposed to estimate DC with similar accuracy to when using all features.
- Open Access
- 15 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 6, 61651-61664
Cooperative Estimation of Primary Traffic Under Imperfect Spectrum Sensing and Byzantine Attacks
Cognitive Radio (CR) systems exploit the accurate knowledge of primary traffic statistics to improve CR performance and reduce harmful interference on primary network. It is essential for cooperative CRs to operate in an efficient secured manner while estimating the primary statistics. In this context, a new reporting mechanism for cooperative estimation of primary traffic is proposed to increase the spectrum and energy efficiency. This is achieved by the reduction of the reporting channel overhead from cooperative users to the fusion centre. Simulation results show that the proposed scheme reduces significantly the signalling overhead, thus making the system more spectrum and energy efficient. Moreover, the openness of cooperative CR makes it susceptible to data falsification attacks, also known as Byzantine attacks. This attack poses a series of damages on the reliability of the estimation of primary traffic. In this work, we define the types of malicious coordinated attacks on CRs and analyse the possibility of estimating the primary traffic statistics under these attacks. Moreover, we provide a simple yet effective counter-measure based on the proposed reporting for cooperative estimation. Simulation evaluation shows that the proposed algorithm provides an excellent counter-measure for spectrum sensing data falsification attacks.
- 15 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 6, 61651-61664
Open AccessCooperative Estimation of Primary Traffic Under Imperfect Spectrum Sensing and Byzantine Attacks
Cognitive Radio (CR) systems exploit the accurate knowledge of primary traffic statistics to improve CR performance and reduce harmful interference on primary network. It is essential for cooperative CRs to operate in an efficient secured manner while estimating the primary statistics. In this context, a new reporting mechanism for cooperative estimation of primary traffic is proposed to increase the spectrum and energy efficiency. This is achieved by the reduction of the reporting channel overhead from cooperative users to the fusion centre. Simulation results show that the proposed scheme reduces significantly the signalling overhead, thus making the system more spectrum and energy efficient. Moreover, the openness of cooperative CR makes it susceptible to data falsification attacks, also known as Byzantine attacks. This attack poses a series of damages on the reliability of the estimation of primary traffic. In this work, we define the types of malicious coordinated attacks on CRs and analyse the possibility of estimating the primary traffic statistics under these attacks. Moreover, we provide a simple yet effective counter-measure based on the proposed reporting for cooperative estimation. Simulation evaluation shows that the proposed algorithm provides an excellent counter-measure for spectrum sensing data falsification attacks.
- 8 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cognitive Communications and Networking
- Vol. 5 (1) , 59-72
On the Sample Size for the Estimation of Primary Activity Statistics Based on Spectrum Sensing
Dynamic Spectrum Access (DSA)/Cognitive Radio (CR) systems can benefit from the knowledge of the activity statistics of primary channels, which can use this information to intelligently adapt their spectrum use to the operating environment. Particularly relevant statistics are the minimum, mean and variance of the on/off period durations, the channel duty cycle and the governing distribution. However, most DSA/CR systems have limited resources (power consumption, memory capacity, computational capability) and an important question arises of how many on/off period observations are required (i.e., the number of observed on/off periods, referred to as observation sample size in this work) to estimate the statistics of the primary channel to a certain desired level of accuracy. In this work, closed-form expressions to link such sample size with the accuracy of the observed primary activity statistics are proposed. A comprehensive theoretical analysis is performed on the required number of observed on/off periods to obtain a specific estimation accuracy. The accuracy of the obtained analytical results is validated and corroborated with both simulation and experimental results, showing a perfect agreement. The analytical results derived in this work can be used in the design and dimensioning of DSA/CR systems in which the spectrum awareness function relies on spectrum sensing.
- 8 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cognitive Communications and Networking
- Vol. 5 (1) , 59-72
On the Sample Size for the Estimation of Primary Activity Statistics Based on Spectrum Sensing
Dynamic Spectrum Access (DSA)/Cognitive Radio (CR) systems can benefit from the knowledge of the activity statistics of primary channels, which can use this information to intelligently adapt their spectrum use to the operating environment. Particularly relevant statistics are the minimum, mean and variance of the on/off period durations, the channel duty cycle and the governing distribution. However, most DSA/CR systems have limited resources (power consumption, memory capacity, computational capability) and an important question arises of how many on/off period observations are required (i.e., the number of observed on/off periods, referred to as observation sample size in this work) to estimate the statistics of the primary channel to a certain desired level of accuracy. In this work, closed-form expressions to link such sample size with the accuracy of the observed primary activity statistics are proposed. A comprehensive theoretical analysis is performed on the required number of observed on/off periods to obtain a specific estimation accuracy. The accuracy of the obtained analytical results is validated and corroborated with both simulation and experimental results, showing a perfect agreement. The analytical results derived in this work can be used in the design and dimensioning of DSA/CR systems in which the spectrum awareness function relies on spectrum sensing.