Peixing Wei
Research Subjects
Peixing Wei has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
Brad Jianhe Wang
Ningbo Sino-Canada Low Carbon New Technology Institute
3 shared publications- Jinxiang Chen
Key Laboratory of Concrete and Prestressed Concrete Structures of the Ministry of Education, Southeast University, Nanjing, China
3 shared publications - Hao Li
Zhejiang A&F University
2 shared publications Libin Wang
2 shared publicationsSonglin Yi
State Key Laboratory of Efficient Production of Forest Resources, Beijing Key Laboratory of Wood Science and Engineering, College of Material Science and Technology, Beijing Forestry University, Beijing 100083, P R China
2 shared publicationsYeyingzi Guo
Jiangsu Vocational College of Agriculture and Forestry, Jurong 212400, P R China
2 shared publications
Latest Publications
- 2 May 2025
- Published by BioResources in BioResources
- Vol. 20 (3)
Multimodal evaluation of warmth perception in wood: An experimental study based on visual, tactile, and visual-tactile interactions
The inherent warmth of wood is widely valued in design applications, yet the mechanisms underlying its perception across different sensory modalities have not been fully explored. The aim of this work was to investigate the physical properties that influence warmth perception of wood across different species and surface treatments, and to clarify the respective contributions of visual and tactile warmth during multisensory integration. In this work, 10 material samples were technically characterized and their perceived warmth was evaluated by participants under three conditions: vision-only, touch-only, or combined visual-tactile interactions. Infrared thermography was used to quantify material temperature changes. Results showed that color dominated warmth perception under the visual assessment, while thermal properties and hand-material interface temperature differences significantly influenced tactile warmth perception. Wood species exhibited substantial effects on warmth perception, whereas surface treatments showed limited impact. Visual-tactile warmth perception was significantly positively correlated with both modalities, predominantly mediated by tactile inputs during direct contact, with visual characteristics providing critical complementary information. These findings advance the understanding of wood’s multisensory warmth perception and provide valuable insights for user-centered wood space and product design.
- 2 May 2025
- Published by BioResources in BioResources
- Vol. 20 (3)
Multimodal evaluation of warmth perception in wood: An experimental study based on visual, tactile, and visual-tactile interactions
The inherent warmth of wood is widely valued in design applications, yet the mechanisms underlying its perception across different sensory modalities have not been fully explored. The aim of this work was to investigate the physical properties that influence warmth perception of wood across different species and surface treatments, and to clarify the respective contributions of visual and tactile warmth during multisensory integration. In this work, 10 material samples were technically characterized and their perceived warmth was evaluated by participants under three conditions: vision-only, touch-only, or combined visual-tactile interactions. Infrared thermography was used to quantify material temperature changes. Results showed that color dominated warmth perception under the visual assessment, while thermal properties and hand-material interface temperature differences significantly influenced tactile warmth perception. Wood species exhibited substantial effects on warmth perception, whereas surface treatments showed limited impact. Visual-tactile warmth perception was significantly positively correlated with both modalities, predominantly mediated by tactile inputs during direct contact, with visual characteristics providing critical complementary information. These findings advance the understanding of wood’s multisensory warmth perception and provide valuable insights for user-centered wood space and product design.
- 1 May 2024
- Published by BioResources in BioResources
- Vol. 19 (3) , 4652-4669
Effect of changes in surface visual properties of heat-treated wood on the psychological preference
Heat treatment of wood is an attractive, environmentally friendly modification, which can change surface visual properties of wood including color and grain, but it is unclear how heat-treated wood is perceived and evaluated compared with untreated wood. In this paper, Chinese fir was heat-treated at 160, 180, 200, or 220 °C for 2 or 4 h. The changes of wood surface color and grain contrast were measured. A subjective questionnaire and eye-tracking technology were used for psychological evaluation. The results showed that changes in the visual properties of heat-treated wood had a significant effect on psychological preference—heat-treated wood was generally more preferred than the untreated, particularly at 200 °C for 4 h. Grain contrast and hue played an important role in the preference for heat-treated wood. The preference gave people the positive psychological impression of warmth, weight, cost, prevalence, and comfort. Eye-tracking analysis showed that Chinese fir heat-treated at about 200 °C with high hue value and clear grain contrast was easier to gain more visual attention. The results would have a high technical reference value for the heat-treated wood in product visual design.
- 1 May 2024
- Published by BioResources in BioResources
- Vol. 19 (3) , 4652-4669
Effect of changes in surface visual properties of heat-treated wood on the psychological preference
Heat treatment of wood is an attractive, environmentally friendly modification, which can change surface visual properties of wood including color and grain, but it is unclear how heat-treated wood is perceived and evaluated compared with untreated wood. In this paper, Chinese fir was heat-treated at 160, 180, 200, or 220 °C for 2 or 4 h. The changes of wood surface color and grain contrast were measured. A subjective questionnaire and eye-tracking technology were used for psychological evaluation. The results showed that changes in the visual properties of heat-treated wood had a significant effect on psychological preference—heat-treated wood was generally more preferred than the untreated, particularly at 200 °C for 4 h. Grain contrast and hue played an important role in the preference for heat-treated wood. The preference gave people the positive psychological impression of warmth, weight, cost, prevalence, and comfort. Eye-tracking analysis showed that Chinese fir heat-treated at about 200 °C with high hue value and clear grain contrast was easier to gain more visual attention. The results would have a high technical reference value for the heat-treated wood in product visual design.
- Open Access
- 1 June 2021
- Published by BioResources in BioResources
- Vol. 16 (3) , 5187-5202
Performance evaluation of a novel cross-laminated timber made from flattened bamboo and wood lumber
A novel flattened bamboo-wood composite cross-laminated timber (CCLT) made from flattened bamboo and hemlock lumber was developed, and its mechanical performance was investigated and quantified in this work. The results demonstrated that the CCLT columns and control hemlock CLT counterparts had nearly equal axial compression strength, but the CCLT yielded a higher compression modulus of elasticity (MOE). Additionally, the CCLT compression behaviors were not significantly affected by the height. Compared with hemlock CLT, the CCLT exhibited a slightly higher flatwise bending MOE and strength in the major strength direction. Furthermore, the MOE and strength of the CCLT under edgewise bending were 17.3% less and 16.2% greater than those under flatwise bending, respectively. The load-carrying capacity of the CCLT was mainly governed by the interfacial failure between the bamboo and wood, in which no rolling shear failure was observed. Those features are unique for the new CCLT for engineered applications.
- 1 June 2021
- Published by BioResources in BioResources
- Vol. 16 (3) , 5187-5202
Open AccessPerformance evaluation of a novel cross-laminated timber made from flattened bamboo and wood lumber
A novel flattened bamboo-wood composite cross-laminated timber (CCLT) made from flattened bamboo and hemlock lumber was developed, and its mechanical performance was investigated and quantified in this work. The results demonstrated that the CCLT columns and control hemlock CLT counterparts had nearly equal axial compression strength, but the CCLT yielded a higher compression modulus of elasticity (MOE). Additionally, the CCLT compression behaviors were not significantly affected by the height. Compared with hemlock CLT, the CCLT exhibited a slightly higher flatwise bending MOE and strength in the major strength direction. Furthermore, the MOE and strength of the CCLT under edgewise bending were 17.3% less and 16.2% greater than those under flatwise bending, respectively. The load-carrying capacity of the CCLT was mainly governed by the interfacial failure between the bamboo and wood, in which no rolling shear failure was observed. Those features are unique for the new CCLT for engineered applications.
- 1 October 2019
- Published by Elsevier in Construction and Building Materials
- Vol. 222, 86-95
A comparative study of compression behaviors of cross-laminated timber and glued-laminated timber columns
- 1 October 2019
- Published by Elsevier in Construction and Building Materials
- Vol. 222, 86-95
A comparative study of compression behaviors of cross-laminated timber and glued-laminated timber columns
- 30 January 2019
- Published by BioResources in BioResources
- Vol. 14 (1) , 2160-2170
An exploratory study of composite cross-laminated timber (CCLT) made from bamboo and hemlock-fir mix
This work investigated the feasibility of manufacturing composite cross-laminated timber (CCLT) from bamboo and a western hemlock and amabilis fir mix (hem-fir). Bamboo parallel strand lumber (bamboo PSL) was first fabricated as the surface laminae of CCLT. No. 2 and Btr 2×6 western hem-fir dimension lumber was imported from British Columbia (BC), Canada. The lumber was then sorted and further dried to form the inner laminae of CCLT. Multiple 800 × 800-mm CLT billets were fabricated using a commercial single-component polyurethane (PUR) adhesive. Block shear and delamination tests were conducted to examine the bond quality and durability of bamboo-wood CCLT. The results demonstrated that it is technically feasible to manufacture bamboo-wood CCLT with acceptable bond quality (shear strength, wood failure percentage, etc.) and delamination. Further studies should focus on the optimization of process parameters for manufacturing and surface treatment to improve the bond quality and durability and quantify the mechanical performance of bamboo-wood CCLT with a full-size production trial.
- 30 January 2019
- Published by BioResources in BioResources
- Vol. 14 (1) , 2160-2170
An exploratory study of composite cross-laminated timber (CCLT) made from bamboo and hemlock-fir mix
This work investigated the feasibility of manufacturing composite cross-laminated timber (CCLT) from bamboo and a western hemlock and amabilis fir mix (hem-fir). Bamboo parallel strand lumber (bamboo PSL) was first fabricated as the surface laminae of CCLT. No. 2 and Btr 2×6 western hem-fir dimension lumber was imported from British Columbia (BC), Canada. The lumber was then sorted and further dried to form the inner laminae of CCLT. Multiple 800 × 800-mm CLT billets were fabricated using a commercial single-component polyurethane (PUR) adhesive. Block shear and delamination tests were conducted to examine the bond quality and durability of bamboo-wood CCLT. The results demonstrated that it is technically feasible to manufacture bamboo-wood CCLT with acceptable bond quality (shear strength, wood failure percentage, etc.) and delamination. Further studies should focus on the optimization of process parameters for manufacturing and surface treatment to improve the bond quality and durability and quantify the mechanical performance of bamboo-wood CCLT with a full-size production trial.
- 1 January 2019
- Published by Elsevier in Construction and Building Materials
- Vol. 196, 437-442
Modeling and prediction of modulus of elasticity of laminated veneer lumber based on laminated plate theory
- 1 January 2019
- Published by Elsevier in Construction and Building Materials
- Vol. 196, 437-442
Modeling and prediction of modulus of elasticity of laminated veneer lumber based on laminated plate theory
- 27 September 2018
- Published by Springer Nature in Journal of Materials Science
- Vol. 54 (3) , 2193-2204
Experimental and numerical study on the energy absorption abilities of trabecular–honeycomb biomimetic structures inspired by beetle elytra
- 27 September 2018
- Published by Springer Nature in Journal of Materials Science
- Vol. 54 (3) , 2193-2204
Experimental and numerical study on the energy absorption abilities of trabecular–honeycomb biomimetic structures inspired by beetle elytra
- 16 January 2018
- Published by Springer Nature in European Journal of Wood and Wood Products
- Vol. 76 (3) , 833-841
The evaluation of panel bond quality and durability of hem-fir cross-laminated timber (CLT)
- 16 January 2018
- Published by Springer Nature in European Journal of Wood and Wood Products
- Vol. 76 (3) , 833-841
The evaluation of panel bond quality and durability of hem-fir cross-laminated timber (CLT)
- 10 July 2017
- Published by SAGE Publications in Journal of Sandwich Structures & Materials
- Vol. 21 (4) , 1520-1534
Characteristics of the shear mechanical properties and the influence mechanism of short basalt fiber reinforced polymer composite materials
To increase the engineering applications of basalt fiber, the characteristics of the shear mechanical properties and the influence mechanisms of the fiber length ( Lf) and volume fraction ( Vf) for short basalt fiber reinforced epoxy resin polymer composites were investigated. The following results were obtained: (1) The first critical loads on all the shear load–displacement curves are close to the same value due to having the same interface bonding of the fiber–matrix; (2) the shear strength, deformation, and energy dissipation capacity all increase with increasing Vf; however, when Lf is 6 or 9 mm, these increases are slower, whereas when Lf is 3 mm, these values increase at an approximately constant rate; and (3) the shear elastic modulus of the samples reaches its maximum value when Lf is 3 mm and Vf is 25%; however, it increases more quickly when Lf is 6 or 9 mm. The failure mode of the samples with the larger Lf values is mainly debonding between the fiber and matrix; when Vf is high, the fibers can easily bundle, which reduces the adhesion between the fibers and matrix. In addition, the main failure mode of the 3-mm-long fiber samples is fiber pull-out; when Vf is high, the short fibers that are not pulled out significantly increase the deformation ability.
- 10 July 2017
- Published by SAGE Publications in Journal of Sandwich Structures & Materials
- Vol. 21 (4) , 1520-1534
Characteristics of the shear mechanical properties and the influence mechanism of short basalt fiber reinforced polymer composite materials
To increase the engineering applications of basalt fiber, the characteristics of the shear mechanical properties and the influence mechanisms of the fiber length ( Lf) and volume fraction ( Vf) for short basalt fiber reinforced epoxy resin polymer composites were investigated. The following results were obtained: (1) The first critical loads on all the shear load–displacement curves are close to the same value due to having the same interface bonding of the fiber–matrix; (2) the shear strength, deformation, and energy dissipation capacity all increase with increasing Vf; however, when Lf is 6 or 9 mm, these increases are slower, whereas when Lf is 3 mm, these values increase at an approximately constant rate; and (3) the shear elastic modulus of the samples reaches its maximum value when Lf is 3 mm and Vf is 25%; however, it increases more quickly when Lf is 6 or 9 mm. The failure mode of the samples with the larger Lf values is mainly debonding between the fiber and matrix; when Vf is high, the fibers can easily bundle, which reduces the adhesion between the fibers and matrix. In addition, the main failure mode of the 3-mm-long fiber samples is fiber pull-out; when Vf is high, the short fibers that are not pulled out significantly increase the deformation ability.
- 27 October 2015
- Published by Taylor & Francis in Journal of Wood Chemistry and Technology
- Vol. 36 (2) , 129-139
Suitability of Printing Materials for Heat-Induced Inkless Eco-Printing
Pyrolysis volatiles and the environmental impact of printing paper, newspaper, and silk were investigated to identify suitable materials for heat-induced eco-printing (HIEP) using pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). Furthermore, the printing effects of simulated HIEP and the material microstructures were studied using scanning electron microscopy (SEM). The results indicated that the toxicity of pyrolysis volatiles is highest for newspaper, followed by silk and then printing paper, whereas environmental friendliness follows the opposite trend. A high concentration of lignin, the basic structural element of which is phenyl propane, and the presence of halogens in the newspaper led to the generation of more toxic substances during the pyrolysis process. The benzene compounds and heterocyclic compounds in silk also produced high levels of toxic substances. Based on these findings and the higher color permeability of newspaper, printing paper was the most suitable material for HIEP and newspaper was the least suitable. Additionally, silk may still be used in HIEP in small amounts for the production of art, name cards, and clothing tags.
- 27 October 2015
- Published by Taylor & Francis in Journal of Wood Chemistry and Technology
- Vol. 36 (2) , 129-139
Suitability of Printing Materials for Heat-Induced Inkless Eco-Printing
Pyrolysis volatiles and the environmental impact of printing paper, newspaper, and silk were investigated to identify suitable materials for heat-induced eco-printing (HIEP) using pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). Furthermore, the printing effects of simulated HIEP and the material microstructures were studied using scanning electron microscopy (SEM). The results indicated that the toxicity of pyrolysis volatiles is highest for newspaper, followed by silk and then printing paper, whereas environmental friendliness follows the opposite trend. A high concentration of lignin, the basic structural element of which is phenyl propane, and the presence of halogens in the newspaper led to the generation of more toxic substances during the pyrolysis process. The benzene compounds and heterocyclic compounds in silk also produced high levels of toxic substances. Based on these findings and the higher color permeability of newspaper, printing paper was the most suitable material for HIEP and newspaper was the least suitable. Additionally, silk may still be used in HIEP in small amounts for the production of art, name cards, and clothing tags.