Emerson Sanches
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Emerson Sanches has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Eduardo Salamuni
Universidade Federal do Paraná, Brasil
3 shared publications Clauzionor Lima da Silva
2 shared publicationsEduardo Salamuni
2 shared publications- Jéssica Miranda dos Santos
Universidade Federal do Paraná, Brazil
2 shared publications - Leonardo Evangelista Lagoeiro
Universidade Federal do Paraná, Brasil
2 shared publications - Michelangelo Tissi Baldin
Universidade Estadual de Ponta Grossa, Brasil
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Geology
- Vol. 56
Petrographic, structural, and deformational analysis in the Curitiba Shear Zone, Ribeira Belt: a case study at São Jorge quarry, Eastern Paraná State, Brazil
The Ribeira Belt in southern Brazil records the Neoproterozoic tectonic evolution associated with the amalgamation of Western Gondwana, and its shear zones provide critical constraints on transcurrent–transpressive deformation regimes. Within this framework, the Atuba Complex in the Curitiba Terrane hosts the São Jorge quarry, where metatexites preserve evidence of progressive deformation. This study investigates feldspar intracrystalline plasticity and quartz–feldspar microstructures to better understand deformation mechanisms and their significance for strain partitioning during the evolution of the Curitiba Shear Zone. Petrography, structural analysis, finite strain quantification (Fry, Polar, Rf/ϕ), and electron backscatter diffraction (EBSD) were combined to characterize deformation fabrics. This research analyzes feldspar crystals to investigate intracrystalline plasticity, while finite strain quantification was primarily based on quartz grains, which serve as reliable markers for bulk strain estimates. Three deformation stages were identified: (i) ductile shear producing mylonitic metatexites with steep NE–SW foliation and sinistral kinematics, (ii) overprinting brittle–ductile deformation, and (iii) late brittle fracturing. Quartz microstructures, including lobate boundaries and grain boundary migration, indicate deformation temperatures exceeding 500°C, while feldspar exhibits undulatory extinction, subgrain formation, and moderate dynamic recrystallization. EBSD data reveal a crystallographic preferred orientation of albite consistent with {100} slip, also suggesting deformation at ~500°C. Finite strain ratios are low (R ≈ 1.5-2.1), reflecting the last local increment of deformation rather than the total bulk strain, and indicating limited strain accumulation despite localized intense shearing. Brittle–ductile overprints are marked by fractures, fault zones, grain-size reduction, and comminution. Taken together, we interpret the deformation at the São Jorge quarry to be progressive, transitioning from ductile to brittle regimes within a transcurrent–transpressive setting. This interpretation provides new constraints on the structural evolution of the Atuba Complex and Curitiba Terrane and contributes to broader models of strain accommodation in the southern Ribeira Belt during the Brasiliano Orogeny.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Geology
- Vol. 56
Open AccessPetrographic, structural, and deformational analysis in the Curitiba Shear Zone, Ribeira Belt: a case study at São Jorge quarry, Eastern Paraná State, Brazil
The Ribeira Belt in southern Brazil records the Neoproterozoic tectonic evolution associated with the amalgamation of Western Gondwana, and its shear zones provide critical constraints on transcurrent–transpressive deformation regimes. Within this framework, the Atuba Complex in the Curitiba Terrane hosts the São Jorge quarry, where metatexites preserve evidence of progressive deformation. This study investigates feldspar intracrystalline plasticity and quartz–feldspar microstructures to better understand deformation mechanisms and their significance for strain partitioning during the evolution of the Curitiba Shear Zone. Petrography, structural analysis, finite strain quantification (Fry, Polar, Rf/ϕ), and electron backscatter diffraction (EBSD) were combined to characterize deformation fabrics. This research analyzes feldspar crystals to investigate intracrystalline plasticity, while finite strain quantification was primarily based on quartz grains, which serve as reliable markers for bulk strain estimates. Three deformation stages were identified: (i) ductile shear producing mylonitic metatexites with steep NE–SW foliation and sinistral kinematics, (ii) overprinting brittle–ductile deformation, and (iii) late brittle fracturing. Quartz microstructures, including lobate boundaries and grain boundary migration, indicate deformation temperatures exceeding 500°C, while feldspar exhibits undulatory extinction, subgrain formation, and moderate dynamic recrystallization. EBSD data reveal a crystallographic preferred orientation of albite consistent with {100} slip, also suggesting deformation at ~500°C. Finite strain ratios are low (R ≈ 1.5-2.1), reflecting the last local increment of deformation rather than the total bulk strain, and indicating limited strain accumulation despite localized intense shearing. Brittle–ductile overprints are marked by fractures, fault zones, grain-size reduction, and comminution. Taken together, we interpret the deformation at the São Jorge quarry to be progressive, transitioning from ductile to brittle regimes within a transcurrent–transpressive setting. This interpretation provides new constraints on the structural evolution of the Atuba Complex and Curitiba Terrane and contributes to broader models of strain accommodation in the southern Ribeira Belt during the Brasiliano Orogeny.
- 16 February 2024
- Published by Elsevier in Journal of South American Earth Sciences
- Vol. 137
Cenozoic morphotectonic evolution of the eastern edge of Paraná Sedimentary Basin, southern Brazil
- 16 February 2024
- Published by Elsevier in Journal of South American Earth Sciences
- Vol. 137
Cenozoic morphotectonic evolution of the eastern edge of Paraná Sedimentary Basin, southern Brazil
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Geology
- Vol. 54 (1) , e20230016
Advancing geological and structural understanding of the Atuba Complex: a study in the Curitiba Terrane of the Southern Ribeira Belt, Southern Brazil
The Atuba Complex occurs in the eastern region of Paraná State, located in the Southern Ribeira Belt. It is comprised of the Curitiba Terrane, northward of the Luís Alves Terrane, and southward of the Apiaí Terrane. This research was carried out by means of detailed petrography, microtectonics, and brittle and ductile structural analysis. The Atuba Complex is composed of migmatites, felsic granulites, granitoids, quartzites, phyllonites, schists, amphibolites, and cataclasites. The lithotypes are cut by diabase or gabbro dikes, lamprophyre dikes, pseudotachylites, and quartz, epidote, carbonate, or chlorite veins. The migmatites are characterized by two migmatization phases, the first composed of tonalitic leucosomes and the second formed by granitic leucosomes. The stromatic and mylonitized migmatites suggest dislocation creep mechanisms and dynamic recrystallization processes, mainly in quartz and feldspars. During the initial phase, melting reactions took place through dehydration, while in the subsequent phase, melting was facilitated by the presence of water-fluxed. The Atuba Complex comprises two foliations, Sn-1 (Dn-1 phase) and Sn (Dn phase). The Sn-1 surface (compositional banding) presents a ductile and anastomosed aspect with an N45W/55NE attitude, whereas the Sn mylonitic foliation is defined by the presence of mineral flattening or stretching and by the orientation of amphibole and biotite shapes, with a maximum plane of N45E/85NW. The observed faults and fractures strike in the NE-SW and NW-SE main directions. The paleostress study provided the recognition of a NE-SW sigma 1 associated with a NW-SE-striking sigma 3 for the left-lateral strike-slip faults and an E-W compressive SHMAX and an N-S distensive SHMIN for the right-lateral strike-slip faults.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Geology
- Vol. 54 (1) , e20230016
Open AccessAdvancing geological and structural understanding of the Atuba Complex: a study in the Curitiba Terrane of the Southern Ribeira Belt, Southern Brazil
The Atuba Complex occurs in the eastern region of Paraná State, located in the Southern Ribeira Belt. It is comprised of the Curitiba Terrane, northward of the Luís Alves Terrane, and southward of the Apiaí Terrane. This research was carried out by means of detailed petrography, microtectonics, and brittle and ductile structural analysis. The Atuba Complex is composed of migmatites, felsic granulites, granitoids, quartzites, phyllonites, schists, amphibolites, and cataclasites. The lithotypes are cut by diabase or gabbro dikes, lamprophyre dikes, pseudotachylites, and quartz, epidote, carbonate, or chlorite veins. The migmatites are characterized by two migmatization phases, the first composed of tonalitic leucosomes and the second formed by granitic leucosomes. The stromatic and mylonitized migmatites suggest dislocation creep mechanisms and dynamic recrystallization processes, mainly in quartz and feldspars. During the initial phase, melting reactions took place through dehydration, while in the subsequent phase, melting was facilitated by the presence of water-fluxed. The Atuba Complex comprises two foliations, Sn-1 (Dn-1 phase) and Sn (Dn phase). The Sn-1 surface (compositional banding) presents a ductile and anastomosed aspect with an N45W/55NE attitude, whereas the Sn mylonitic foliation is defined by the presence of mineral flattening or stretching and by the orientation of amphibole and biotite shapes, with a maximum plane of N45E/85NW. The observed faults and fractures strike in the NE-SW and NW-SE main directions. The paleostress study provided the recognition of a NE-SW sigma 1 associated with a NW-SE-striking sigma 3 for the left-lateral strike-slip faults and an E-W compressive SHMAX and an N-S distensive SHMIN for the right-lateral strike-slip faults.
- 1 March 2019
- Published by Elsevier in Geomorphology
- Vol. 328, 138-156
Morphotectonics in the Central-East Region of South Brazil: Implications for Catchments of the Lava-Tudo and Pelotas Rivers, State of Santa Catarina
- 1 March 2019
- Published by Elsevier in Geomorphology
- Vol. 328, 138-156
Morphotectonics in the Central-East Region of South Brazil: Implications for Catchments of the Lava-Tudo and Pelotas Rivers, State of Santa Catarina
- Open Access
- 1 July 2018
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Geology
- Vol. 48 (3) , 553-573
Reativation of Taxaquara Fault and its morphotectonic influence on the evolution of Jordão River catchment, Paraná, Brasil
The Paraná basin is one of the major morphotectures of the South American continent. Although its tectono-sedimentary evolution has been widely studied and fairly well understood, this paper aims to fill a gap in knowledge comprising the tectonic evolution after the end of its last sedimentary cycle, in the Upper Cretaceous. In this context, the Jordan River watershed, situated in the surroundings of Guarapuava municipality, south central region of Paraná State, was selected for structural and morphometric analysis where the Cretaceous volcanic rocks of Serra Geral Formation are exposed. The Jordan River watershed was studied for the influence exerted by Taxaquara Fault Zone on its morphologic evolution, since Taxaquara Fault Zone is associated to the Brazilian cycle and extends eastwards to the Ribeira belt in the state of São Paulo. The morphometric analysis consisted in the interpretation of the Jordan River watershed drainage network and relief elements, considering the distribution of existing knickpoints in the water courses. Structural analysis was based on the calculation of the stress fields responsible for the activation of local fault zones, which were determined by their spatial arrangement and the statistical and mechanical treatments of structural data. During the Oligocene and Miocene, erosional processes developed a planing surface which marks the relief in the central region of the Jordan River watershed and serves as a stratigraphic marker for the associated deformational events. Three events that contributed to the morphological framework of the Jordan River watershed were defined: an oldest one, probably active before the development of the Jordan pediplane in the Paleogene, by a NE-SW maximum horizontal stress (SHmax); and two more recent ones, being one of Plio-Pleistocene age, with a N05W SHmax, and a still active event of transtensive nature showing a N75W SHmax. The paleostress analysis points to a similarity between the Cenozoic evolution of Paraná Basin and the tafrogenic basins of southeast Brazil, revealing the amplitude of the deformation events associated to the studied period and ensuring the importance of further studies on the morphotectonic evolutions of intracratonic regions of the South American plate and their correlation to the Andean tectonic cycle.
- 1 July 2018
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Geology
- Vol. 48 (3) , 553-573
Open AccessReativation of Taxaquara Fault and its morphotectonic influence on the evolution of Jordão River catchment, Paraná, Brasil
The Paraná basin is one of the major morphotectures of the South American continent. Although its tectono-sedimentary evolution has been widely studied and fairly well understood, this paper aims to fill a gap in knowledge comprising the tectonic evolution after the end of its last sedimentary cycle, in the Upper Cretaceous. In this context, the Jordan River watershed, situated in the surroundings of Guarapuava municipality, south central region of Paraná State, was selected for structural and morphometric analysis where the Cretaceous volcanic rocks of Serra Geral Formation are exposed. The Jordan River watershed was studied for the influence exerted by Taxaquara Fault Zone on its morphologic evolution, since Taxaquara Fault Zone is associated to the Brazilian cycle and extends eastwards to the Ribeira belt in the state of São Paulo. The morphometric analysis consisted in the interpretation of the Jordan River watershed drainage network and relief elements, considering the distribution of existing knickpoints in the water courses. Structural analysis was based on the calculation of the stress fields responsible for the activation of local fault zones, which were determined by their spatial arrangement and the statistical and mechanical treatments of structural data. During the Oligocene and Miocene, erosional processes developed a planing surface which marks the relief in the central region of the Jordan River watershed and serves as a stratigraphic marker for the associated deformational events. Three events that contributed to the morphological framework of the Jordan River watershed were defined: an oldest one, probably active before the development of the Jordan pediplane in the Paleogene, by a NE-SW maximum horizontal stress (SHmax); and two more recent ones, being one of Plio-Pleistocene age, with a N05W SHmax, and a still active event of transtensive nature showing a N75W SHmax. The paleostress analysis points to a similarity between the Cenozoic evolution of Paraná Basin and the tafrogenic basins of southeast Brazil, revealing the amplitude of the deformation events associated to the studied period and ensuring the importance of further studies on the morphotectonic evolutions of intracratonic regions of the South American plate and their correlation to the Andean tectonic cycle.