Steven Lawrence Bryant
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Steven Lawrence Bryant has a total of 152 co-authors. Here are the top co-authors by number of shared publications:
- Milana Trifkovic
Department of Chemical and Petroleum Engineering, University of Calgary, 2500 University Drive NW, Calgary, Alberta, T2N 1N4, Canada
14 shared publications - Apostolos Kantzas
Department of Chemical and Petroleum Engineering, University of Calgary, Calgary, AB T2N 1N4, Canada
5 shared publications - Paula Berton
Chemical and Petroleum Engineering Department University of Calgary Calgary Alberta Canada
5 shared publications - Rajas Sudhir Shah
Department of Chemical and Petroleum Engineering, Schulich School of Engineering, University of Calgary 1 , Calgary T2N 1N4, Canada
4 shared publications Stephen P. Voegtlin
Department of Chemical and Petroleum Engineering, University of Calgary, Calgary, Canada
4 shared publications- Ali Telmadarreie
University of Calgary
3 shared publications
Latest Publications
- 16 March 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (12) , 8301-8312
Magnetic Field Effects in Pickering Emulsions Stabilized by Magnetic Janus Particles
Magnetic Janus particles have two regions with different surface properties in combination with their magnetic responsiveness. Interfacially active magnetic Janus particles with regions of different surface wettabilities anchor strongly at an oil–water interface and generate stable emulsions. Magnetic Janus particles are ideal emulsifiers for achieving emulsification/demulsification on demand, controlled by an external magnetic field. In-house synthesized magnetic Janus particles were used to stabilize decane droplets in water, developing magnetic Pickering emulsions. Droplet structures, deformation, coalescence, and breakage were studied with and without the application of an external magnetic field by exploring emulsion magneto-rheological behavior. Interfacial shear rheology and optical microscopy were also investigated. The results were used to define the stability criterion of magnetic Janus-particle-based Pickering emulsions under a magnetic field.
- 16 March 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (12) , 8301-8312
Magnetic Field Effects in Pickering Emulsions Stabilized by Magnetic Janus Particles
Magnetic Janus particles have two regions with different surface properties in combination with their magnetic responsiveness. Interfacially active magnetic Janus particles with regions of different surface wettabilities anchor strongly at an oil–water interface and generate stable emulsions. Magnetic Janus particles are ideal emulsifiers for achieving emulsification/demulsification on demand, controlled by an external magnetic field. In-house synthesized magnetic Janus particles were used to stabilize decane droplets in water, developing magnetic Pickering emulsions. Droplet structures, deformation, coalescence, and breakage were studied with and without the application of an external magnetic field by exploring emulsion magneto-rheological behavior. Interfacial shear rheology and optical microscopy were also investigated. The results were used to define the stability criterion of magnetic Janus-particle-based Pickering emulsions under a magnetic field.
- 1 April 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (4)
Fe-doped asphaltenes carbon dots for tumor magnetic resonance imaging
Iron-based contrast agents have recently garnered attention as positive (T1) magnetic resonance imaging (MRI) contrast agents providing an alternative to gadolinium-based contrast agents mired with the nephrogenic systemic fibrosis downsides. Whereas the magnetic cores of iron enable T1 MRI contrast enhancement, the non-magnetic materials (e.g., polymers) usually deployed to stabilize the metal cores affect bulk water diffusion to the iron centers. We present an innovative approach in designing biocompatible complex of asphaltene-derived carbon dots (ACDs) with iron (ACD-Fe), where the ACDs enhanced hydrophilicity improves accessibility of Fe3+ centers to water molecules to achieve effective tumor MRI. The ACD-Fe design strategy involves synthesizing ACDs at a lower temperature (80 °C) with high mass yield, followed by iron doping via easy complexation with FeCl3 at room temperature. The ACD-Fe complex thus serves as tissue-tolerant T1 MRI contrast agent (r1 = 1.33 mM−1s−1) for tumor imaging. This report pioneers the use of asphaltene-derived materials in MRI and tumor imaging, presenting a low-cost, scalable synthesis protocol for the ACD-Fe complex as an effective T1 MRI contrast agent.
- 1 April 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (4)
Fe-doped asphaltenes carbon dots for tumor magnetic resonance imaging
Iron-based contrast agents have recently garnered attention as positive (T1) magnetic resonance imaging (MRI) contrast agents providing an alternative to gadolinium-based contrast agents mired with the nephrogenic systemic fibrosis downsides. Whereas the magnetic cores of iron enable T1 MRI contrast enhancement, the non-magnetic materials (e.g., polymers) usually deployed to stabilize the metal cores affect bulk water diffusion to the iron centers. We present an innovative approach in designing biocompatible complex of asphaltene-derived carbon dots (ACDs) with iron (ACD-Fe), where the ACDs enhanced hydrophilicity improves accessibility of Fe3+ centers to water molecules to achieve effective tumor MRI. The ACD-Fe design strategy involves synthesizing ACDs at a lower temperature (80 °C) with high mass yield, followed by iron doping via easy complexation with FeCl3 at room temperature. The ACD-Fe complex thus serves as tissue-tolerant T1 MRI contrast agent (r1 = 1.33 mM−1s−1) for tumor imaging. This report pioneers the use of asphaltene-derived materials in MRI and tumor imaging, presenting a low-cost, scalable synthesis protocol for the ACD-Fe complex as an effective T1 MRI contrast agent.
- 31 January 2025
- Published by Society of Rheology in Journal of Rheology
- Vol. 69 (2) , 95-109
Magnetorheological response of homogeneous and Janus iron-oxide coated silica particles
The flow behavior of magnetic suspensions made of nonmagnetic spherical particles surface-decorated by a magnetic shell is investigated in this study. Suspensions of SiO2@Fe3O4 homogeneous particles (HPs) (the so-called core/shell particles) and SiO2@Fe3O4 Janus particles (JPs) were compared in terms of their rheological properties. Particle surface characteristics and the contribution of anisotropic magnetization of JPs to interparticle interactions were investigated for the first time. Higher shear viscosity, shear stress, and viscoelastic modulus were obtained in magnetic HP suspensions. However, upon elimination of the saturation magnetization effect of particles, higher shear viscosity was achieved in magnetic JP suspensions due to the more significant contribution of the contact force in the JP systems. The dependence of the magnetorheological (MR) properties on the magnetic particle concentration and magnetic field strength was also evaluated for HP and JP suspensions. These two magnetic systems deviate from conventional MR fluids because the magnetization is generated by the magnetic shell instead of the core of the particles. These observations provide new insights and opportunities for designing MR fluids.
- 31 January 2025
- Published by Society of Rheology in Journal of Rheology
- Vol. 69 (2) , 95-109
Magnetorheological response of homogeneous and Janus iron-oxide coated silica particles
The flow behavior of magnetic suspensions made of nonmagnetic spherical particles surface-decorated by a magnetic shell is investigated in this study. Suspensions of SiO2@Fe3O4 homogeneous particles (HPs) (the so-called core/shell particles) and SiO2@Fe3O4 Janus particles (JPs) were compared in terms of their rheological properties. Particle surface characteristics and the contribution of anisotropic magnetization of JPs to interparticle interactions were investigated for the first time. Higher shear viscosity, shear stress, and viscoelastic modulus were obtained in magnetic HP suspensions. However, upon elimination of the saturation magnetization effect of particles, higher shear viscosity was achieved in magnetic JP suspensions due to the more significant contribution of the contact force in the JP systems. The dependence of the magnetorheological (MR) properties on the magnetic particle concentration and magnetic field strength was also evaluated for HP and JP suspensions. These two magnetic systems deviate from conventional MR fluids because the magnetization is generated by the magnetic shell instead of the core of the particles. These observations provide new insights and opportunities for designing MR fluids.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Spatio-Temporal Imaging of Instability and Transport of Pickering Nanodroplets in Porous Media
Featuring a large specific surface area with associated high reactivity, nanomaterials in various morphologies are ideal candidates for improved oil recovery (IOR), enhanced geothermal systems (EGS) and carbon capture utilization and storage (CCUS). Encapsulation of solid nanomaterials within an oil-in-water (O/W) emulsion (i.e., Pickering emulsion) has been employed to prevent the aggregation and deposition of the nanomaterials in subsurface reservoirs in recent decades. Here, the dispersed phase droplets were decreased to nanoscale through a utilizable procedure. These nanodroplets were stabilized solely by polymer-coated magnetic iron oxide nanoparticles. Low-field NMR and X-ray CT were employed to constantly monitor the stability of Pickering nanoemulsions until phase separation. The polydisperse nanoemulsions are more easily separated due to the severely inhomogeneous chemical potentials of the emulsion droplets. Experimental and theoretical modeling results reveal that the Ostwald ripening is the main instability mechanism for nanoemulsions due to the very small droplets associated with a high surface area. The insolubility of long-chain hydrocarbons in water acts as a kinetic barrier to Ostwald ripening, making those nanoemulsions, both the Pickering and Classical (which is formed only by polymer) ones, inherently stable to Ostwald ripening. The transport and retention of the Pickering nanodroplets in porous media is examined by X-ray CT imaging. Accordingly, in-situ transport of the nanoemulsions in a water-saturated sandpack was quantified spatiotemporally through X-ray CT. Effluents were collected and analyzed to further comprehend the nanoemulsion displacement and retention in porous media. Experimental results demonstrate that accumulation and retention of the nanodroplets in porous media are stimulated by ionic strength, nanodroplet size distribution, and nanoparticle wettability. Three transport modes in porous media (flow through with minimal retention, migration of accumulated nanodroplets, and retention of accumulated nanodroplets) can be achieved through carefully designing the nanoemulsion system.These findings shed light on the fundamental understanding of the (nano-)colloidal dispersions transport in porous media and provide implications for IOR, EGS, and CCUS.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessSpatio-Temporal Imaging of Instability and Transport of Pickering Nanodroplets in Porous Media
Featuring a large specific surface area with associated high reactivity, nanomaterials in various morphologies are ideal candidates for improved oil recovery (IOR), enhanced geothermal systems (EGS) and carbon capture utilization and storage (CCUS). Encapsulation of solid nanomaterials within an oil-in-water (O/W) emulsion (i.e., Pickering emulsion) has been employed to prevent the aggregation and deposition of the nanomaterials in subsurface reservoirs in recent decades. Here, the dispersed phase droplets were decreased to nanoscale through a utilizable procedure. These nanodroplets were stabilized solely by polymer-coated magnetic iron oxide nanoparticles. Low-field NMR and X-ray CT were employed to constantly monitor the stability of Pickering nanoemulsions until phase separation. The polydisperse nanoemulsions are more easily separated due to the severely inhomogeneous chemical potentials of the emulsion droplets. Experimental and theoretical modeling results reveal that the Ostwald ripening is the main instability mechanism for nanoemulsions due to the very small droplets associated with a high surface area. The insolubility of long-chain hydrocarbons in water acts as a kinetic barrier to Ostwald ripening, making those nanoemulsions, both the Pickering and Classical (which is formed only by polymer) ones, inherently stable to Ostwald ripening. The transport and retention of the Pickering nanodroplets in porous media is examined by X-ray CT imaging. Accordingly, in-situ transport of the nanoemulsions in a water-saturated sandpack was quantified spatiotemporally through X-ray CT. Effluents were collected and analyzed to further comprehend the nanoemulsion displacement and retention in porous media. Experimental results demonstrate that accumulation and retention of the nanodroplets in porous media are stimulated by ionic strength, nanodroplet size distribution, and nanoparticle wettability. Three transport modes in porous media (flow through with minimal retention, migration of accumulated nanodroplets, and retention of accumulated nanodroplets) can be achieved through carefully designing the nanoemulsion system.These findings shed light on the fundamental understanding of the (nano-)colloidal dispersions transport in porous media and provide implications for IOR, EGS, and CCUS.
- 3 September 2024
- Published by Elsevier in Geoenergy Science and Engineering
- Vol. 243
Synergy between solvents and acoustic energy destabilizes SAGD emulsions
- 3 September 2024
- Published by Elsevier in Geoenergy Science and Engineering
- Vol. 243
Synergy between solvents and acoustic energy destabilizes SAGD emulsions
- 21 March 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (13) , 16699-16711
Unraveling Water-Based Lubrication with Carbon Dots of Asphaltene Origin
Despite the lower toxicity of water-based lubricants over nonrenewable petroleum-based analogues, they face challenges in achieving widespread adoption due to low stability and inadequate friction-reduction performance. To address this, a cost-effective nanoadditive is synthesized by expansive oxidation of asphaltenes to create biocompatible asphaltene-derived carbon dots [(ACDs); 5 nm]. These ACDs exhibit excellent water redispersibility, promoting long-term friction reduction and marking the first use of an asphaltene-based system for friction reduction in water or oil. Even at low loadings (0.2-4.0 wt %), ACDs significantly reduce friction on steel surfaces (>54%) with tribofilm stability surpassing pristine carbon dots, typical carbon-based graphene quantum dots, and inorganic nanomaterials (commercial 5 and 20 nm silica). The ACDs' attributes include high negative zeta potential, considerable water uptake, varied functional groups, biocompatibility, and a nanodisc shape conducive to stable tribofilm formation through effective particle stacking. The scalable synthesis, high yield, and impressive water redispersibility of ACDs position them favorably for commercial water-based lubrication.
- 21 March 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (13) , 16699-16711
Unraveling Water-Based Lubrication with Carbon Dots of Asphaltene Origin
Despite the lower toxicity of water-based lubricants over nonrenewable petroleum-based analogues, they face challenges in achieving widespread adoption due to low stability and inadequate friction-reduction performance. To address this, a cost-effective nanoadditive is synthesized by expansive oxidation of asphaltenes to create biocompatible asphaltene-derived carbon dots [(ACDs); 5 nm]. These ACDs exhibit excellent water redispersibility, promoting long-term friction reduction and marking the first use of an asphaltene-based system for friction reduction in water or oil. Even at low loadings (0.2-4.0 wt %), ACDs significantly reduce friction on steel surfaces (>54%) with tribofilm stability surpassing pristine carbon dots, typical carbon-based graphene quantum dots, and inorganic nanomaterials (commercial 5 and 20 nm silica). The ACDs' attributes include high negative zeta potential, considerable water uptake, varied functional groups, biocompatibility, and a nanodisc shape conducive to stable tribofilm formation through effective particle stacking. The scalable synthesis, high yield, and impressive water redispersibility of ACDs position them favorably for commercial water-based lubrication.
- 22 January 2024
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 12 (6) , 2334-2344
Enzymatic Polysaccharide-Based Aerogel Absorbents for Sustainable Personal Hygiene Applications
- 22 January 2024
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 12 (6) , 2334-2344
Enzymatic Polysaccharide-Based Aerogel Absorbents for Sustainable Personal Hygiene Applications
- Open Access
Scale‐Dependent Rheology of Synovial Fluid Lubricating Macromolecules
Synovial fluid (SF) is the complex biofluid that facilitates the exceptional lubrication of articular cartilage in joints. Its primary lubricating macromolecules, the linear polysaccharide hyaluronic acid (HA) and the mucin‐like glycoprotein proteoglycan 4 (PRG4 or lubricin), interact synergistically to reduce boundary friction. However, the precise manner in which these molecules influence the rheological properties of SF remains unclear. This study aimed to elucidate this by employing confocal microscopy and multiscale rheometry to examine the microstructure and rheology of solutions containing recombinant human PRG4 (rhPRG4) and HA. Contrary to previous assumptions of an extensive HA‐rhPRG4 network, it is discovered that rhPRG4 primarily forms stiff, gel‐like aggregates. The properties of these aggregates, including their size and stiffness, are found to be influenced by the viscoelastic characteristics of the surrounding HA matrix. Consequently, the rheology of this system is not governed by a single length scale, but instead responds as a disordered, hierarchical network with solid‐like rhPRG4 aggregates distributed throughout the continuous HA phase. These findings provide new insights into the biomechanical function of PRG4 in cartilage lubrication and may have implications in the development of HA‐based therapies for joint diseases like osteoarthritis.
Open AccessScale‐Dependent Rheology of Synovial Fluid Lubricating Macromolecules
Synovial fluid (SF) is the complex biofluid that facilitates the exceptional lubrication of articular cartilage in joints. Its primary lubricating macromolecules, the linear polysaccharide hyaluronic acid (HA) and the mucin‐like glycoprotein proteoglycan 4 (PRG4 or lubricin), interact synergistically to reduce boundary friction. However, the precise manner in which these molecules influence the rheological properties of SF remains unclear. This study aimed to elucidate this by employing confocal microscopy and multiscale rheometry to examine the microstructure and rheology of solutions containing recombinant human PRG4 (rhPRG4) and HA. Contrary to previous assumptions of an extensive HA‐rhPRG4 network, it is discovered that rhPRG4 primarily forms stiff, gel‐like aggregates. The properties of these aggregates, including their size and stiffness, are found to be influenced by the viscoelastic characteristics of the surrounding HA matrix. Consequently, the rheology of this system is not governed by a single length scale, but instead responds as a disordered, hierarchical network with solid‐like rhPRG4 aggregates distributed throughout the continuous HA phase. These findings provide new insights into the biomechanical function of PRG4 in cartilage lubrication and may have implications in the development of HA‐based therapies for joint diseases like osteoarthritis.
- 12 June 2023
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 457, 131824
Multifunctional fully biobased aerogels for water remediation: Applications for dye and heavy metal adsorption and oil/water separation
- 12 June 2023
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 457, 131824
Multifunctional fully biobased aerogels for water remediation: Applications for dye and heavy metal adsorption and oil/water separation