NMNiccolò Michieli

Niccolò Michieli

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Niccolò Michieli has a total of 44 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optimal geometry for plasmonic sensing with non-interacting Au nanodisk arrays

    by Niccolò Michieli, Ionut Gabriel Balasa, Boris Kalinic, Tiziana Cesca, Giovanni Mattei

    Combining finite elements method electrodynamic simulations and cost-effective and scalable nanofabrication techniques, we carried out a systematic investigation and optimization of the sensing properties of non-interacting gold nanodisk arrays. Such plasmonic nanoarchitectures offer a very effective platform for fast and simple, label-free, optical bio- and chemical-sensing. We varied their main geometrical parameters (diameter and height) to monitor the plasmonic resonance position and to find the configurations that maximize the sensitivity to small layers of an analyte (local sensitivity) or to the variation of the refractive index of an embedding medium (bulk sensitivity). The spectral position of the plasmonic resonance can be tuned over a wide range from the visible to the near-IR region (500–1300 nm) and state-of-the-art performances can be obtained using the optimized nanodisks; we obtained local and bulk sensitivities of S0 = 11.9 RIU−1 and Sbulk = 662 nm RIU−1, respectively. Moreover, the results of the simulations are compared with the performances of experimentally synthesized non-interacting Au nanodisk arrays fabricated by combining sparse colloidal lithography and hollow mask lithography, with the parameters obtained by the sensitivity numerical optimization. An excellent agreement between the experimental and the simulated results is demonstrated, confirming that the optimization performed with the simulations is directly applicable to nanosensors realized with cost-effective methods, due to the quite large stability basin around the maximum sensitivities.


  • Ordered arrays of metallic nanoprisms for photonic applications

    by Raúl Rangel-Rojo, Tiziana Cesca, Héctor Sánchez-Esquivel, Karen Yahaira Raygoza-Sánchez, Niccolò Michieli, Ionut Balasa, Boris Kalinic, Giovanni Mattei


  • Photo-acoustic detection of chirality in metal-polystyrene metasurfaces

    by E. Petronijević, G. Leahu, R. Li Voti, A. Belardini, C. Scian, N. Michieli, T. Cesca, G. Mattei, C. Sibilia

    Nowadays, nanophotonics aims towards low-cost chip-scale devices that can tailor electromagnetic properties, one of which is the control of circular polarization at the nanoscale. Here, we demonstrate the chiral properties of metasurfaces produced by means of nanosphere lithography combined with tilted metal deposition. We apply the photo-acoustic technique to characterize the circular dichroism (CD) at 633 nm of polystyrene nanospheres covered by three different metals: Au- and Cr-covered samples show extrinsic chiral behavior, while the Ag-covered sample shows CD at normal incidence, characteristic of intrinsic chirality. As the experimental data are in good agreement with numerical predictions, we believe that such design can be optimized to get efficient circularly polarized detection at the nanoscale.


  • Open Access

    Co3O4 Nanopetals on Si as Photoanodes for the Oxidation of Organics

    by Leonardo Girardi, Luca Bardini, Niccolò Michieli, Boris Kalinic, Chiara Maurizio, Gian Andrea Rizzi, Giovanni Mattei

    Cobalt oxide nanopetals were grown on silicon electrodes by heat-treating metallic cobalt films deposited by DC magnetron sputtering. We show that cobalt oxide, with this peculiar nanostructure, is active towards the photo-electrochemical oxidation of water as well as of organic molecules, and that its electrochemical properties are directly linked to the structure of its surface. The formation of Co3O4 nanopetals, induced by oxidizing annealing at 300 °C, considerably improves the performance of the material with respect to simple cobalt oxide films. Photocurrent measurements and electrochemical impedance are used to explain the behavior of the different structures and to highlight their potential application in water remediation technologies.


  • Understanding lead iodide perovskite hysteresis and degradation causes by extensive electrical characterization

    by Antonio Rizzo, Francesco Lamberti, Marco Buonomo, Nicola Wrachien, Lorenzo Torto, Nicolò Lago, Simone Sansoni, Roberto Pilot, Mirko Prato, Nicolò Michieli, et al.


  • Open Access

    Nanoroughness, Surface Chemistry, and Drug Delivery Control by Atmospheric Plasma Jet on Implantable Devices

    by Alessandro Patelli, Federico Mussano, Paola Brun, Tullio Genova, Emmanuele Ambrosi, Niccoló Michieli, Giovanni Mattei, Paolo Scopece, Lorenzo Moroni

    Implantable devices need specific tailored surface morphologies and chemistries to interact with the living systems or to actively induce a biological response also by the release of drugs or proteins. These customised requirements foster technologies that can be implemented in additive manufacturing systems. Here we present a novel approach based on spraying processes that allows to control separately topographic features in the submicron range (∽ 60 nm - 2 µm), ammine or carboxylic chemistry and fluorophore release even on temperature sensitive biodegradable polymers such as polycaprolactone (PCL). We developed a two-steps process with a first deposition of 220 nm silica and poly(lactic-co-glycolide) (PLGA) fluorescent nanoparticles by aerosol followed by the deposition of a fixing layer by atmospheric pressure plasma jet (APPJ). The nanoparticles can be used to create the nano-roughness and to include active molecule release, while the capping layer ensures stability and the chemical functionalities. The process is enabled by a novel APPJ which allows deposition rates of 10 - 20 nm·s-1 at temperatures lower than 50 °C using argon as process gas. This approach was assessed on titanium alloys for dental implants and on PCL films. The surfaces were characterized by FT-IR, AFM and SEM. Titanium alloys were tested with pre-osteoblasts murine cells line, while PCL film with fibroblasts. Cell behaviour was evaluated by viability and adhesion assays, protein adsorption, cell proliferation, focal adhesion formation and SEM. The release of a fluorophore molecule was assessed in the cell growing media, simulating a drug release. Osteoblast adhesion on the plasma treated materials increased by 20% with respect to commercial titanium alloys implants. Fibroblast adhesion increased by a 100% compared to smooth PCL substrate. The release of the fluorophore by the dissolution of the PLGA nanoparticles was verified and the integrity of the encapsulated drug model confirmed.


  • Open Access

    Rare-earth fluorescence thermometry of laser-induced plasmon heating in silver nanoparticles arrays

    by Tiziana Cesca, Giovanni Perotto, Giovanni Pellegrini, Niccolò Michieli, Boris Kalinic, Giovanni Mattei

    The laser-induced plasmon heating of an ordered array of silver nanoparticles, under continuous illumination with an Ar laser, was probed by rare-earth fluorescence thermometry. The rise in temperature in the samples was monitored by measuring the temperature-sensitive photoluminescent emission of a europium complex (EuTTA) embedded in PMMA thin-films, deposited onto the nanoparticles array. A maximum temperature increase of 19 °C was determined upon resonant illumination with the surface plasmon resonance of the nanoarray at the highest pump Ar laser power (173 mW). The experimental results were supported by finite elements method electrodynamic simulations, which provided also information on the temporal dynamics of the heating process. This method proved to be a facile and accurate approach to probe the actual temperature increase due to photo-induced plasmon heating in plasmonic nanosystems.


  • Core–shell-like Au sub-nanometer clusters in Er-implanted silica

    by Chiara Maurizio, Tiziana Cesca, Giovanni Perotto, Boris Kalinic, Niccolò Michieli, Carlo Scian, Yves Joly, Giancarlo Battaglin, Paolo Mazzoldi, Giovanni Mattei

    The very early steps of Au metal cluster formation in Er-doped silica have been investigated by high-energy resolution fluorescence-detected X-ray absorption spectroscopy (HERFD-XAS). A combined analysis of the near-edge and extended part of the experimental spectra shows that Au cluster nucleation starts from a few Au and O atoms covalently interconnected, likely in the presence of embryonic Au–Au correlation. The first Au clusters, characterized by a well defined Au–Au coordination distance, form upon 400 °C inert annealing. The estimated upper limit of the Gibbs free energy for the associated heterogeneous nucleation is 0.06 eV per atom, suggesting that the Au nucleation is assisted by matrix defects, most likely non-bridging oxygen atoms. The experimental results indicate that the formed subnanometer Au clusters can be applied as effective core–shell systems in which the Au atoms of the ‘core’ develop a metallic character, whereas the Au atoms in the ‘shell’ can retain a partially covalent bond with O atoms of the silica matrix. High structural disorder at the Au site is found upon neutral annealing at a moderate temperature (600 °C), likely driven by the configurational disorder of the defective silica matrix. A suitable choice of the Au concentration and annealing temperature allows tailoring of the Au cluster size in the sub-nanometer range. The interaction of the Au cluster surface with the surrounding silica matrix is likely responsible for the infrared luminescence previously reported on the same systems.