TKTetsuya Kodaira

Tetsuya Kodaira

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tetsuya Kodaira has a total of 228 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Applications of UV/Vis Diffuse Reflectance Spectroscopy to Gas–Liquid Mixtures, Structurally Colored Pigments, and Metallic Powders

    by Tetsuya Kodaira, Yoshihiro Kamimura, Hajime Kawanami

    Diffuse reflectance (DR) spectroscopy is a fundamental method for the spectroscopic characterization of powder materials. With the emergence of advanced powder materials and the growing demand for measurements under specific conditions, the applicability of this classical method has recently expanded owing to advances in spectrophotometer technology. In this study, we demonstrate the versatility of DR spectroscopy by applying it to three challenging systems: a color‐changing pigment powder; carbonated water containing a pH indicator and CO 2 bubbles, for which conventional transmission measurements are difficult; and silver (Ag) metal powders. Through these measurements, new experimental protocols and a spectral analysis method for DR spectroscopy were developed and evaluated. Angle‐resolved measurements of the incident and detected light enabled analysis of the pigment powder, revealing structural coloration originating from the composite structure of its constituent particles. Dynamic pH changes in carbonated water were successfully monitored by measuring the DR spectrum of a pH indicator after dispersing α‐Al 2 O 3 powder into the solution. The reflectance spectrum of Ag powder was successfully derived from its DR spectrum using an R + T transformation method. These findings demonstrate that DR spectroscopy is a versatile analytical tool with expanding applicability beyond conventional powder characterization.

  • Evacuation-Induced Desorption of an OSDA from GaPO4-LTA as an Alternative to Calcination: Microporosity and Framework Stability

    by Tetsuya Kodaira, Yoshihiro Kamimura, Akira Endo, Takuji Ikeda

    Open-framework gallium phosphates (GaPO4) are generally considered unstable, often collapsing during calcination for the removal of organic structure-directing agents (OSDAs). We developed an effective and simple method to remove dipropylamine (DPA), an OSDA, from GaPO4-LTA (a gallium phosphate with the LTA-type framework) by heating it at 623 K in vacuo, thus avoiding combustion. Following this proposed methodology, the LTA-type framework persisted successfully under an inert atmosphere, although it exhibited signs of strain. Porosity after this treatment was characterized by Ar adsorption–desorption measurements. The isotherms showed Type I curves without hysteresis, characteristic of purely microporous materials. The material exhibited a Brunauer–Emmett–Teller specific area of 428 m2/g and a micropore volume of 0.150 cm3/g. These values suggest the presence of approximately 30 wt % nonporous phase within the sample. GaPO4-LTA exhibited weaker attractive interactions with Ar and N2 adsorbates compared to LTA-type aluminosilicates (Ca-form A and Na-form ZK-4). Thermogravimetry-mass spectrometry revealed that DPA desorbs intact, offering a new route for the recovery and reuse of OSDAs.

  • Open Access

    Incommensurate structure of AlPO 4 -5 and its stability

    by Kazuki Komatsu, Takuji Ikeda, Tetsuya Kodaira

    The incommensurate structure of AlPO 4 -5 and its stability have been investigated in detail. Under ambient conditions, single-crystal X-ray diffraction measurements reveal weak satellite reflections, which become significantly enhanced upon exposure to vacuum. Temperature-dependent X-ray diffraction and Raman scattering measurements of the O–H stretching region show that the appearance of satellite reflections is due to the desorption of water molecules under vacuum, and the satellite reflections disappear above 335 (5) K, whereas their intensity increases again upon cooling to room temperature. To elucidate the origin of the modulation, single-crystal X-ray diffraction experiments were performed on a dehydrated sample. Diffraction data including satellite reflections up to second order were successfully collected, with a modulation vector of q = 0.36710 (5) c *. Analysis of systematic absences up to second-order satellites indicate that the (3+1)D superspace group is P 6(00γ) h . On the basis of these data, the first-order positional modulation amplitudes were refined. The results indicate that the modulation originates from correlated rotational displacements of AlO 4 and PO 4 tetrahedra. This behaviour suggests that phonon-like motions, as proposed in previous studies, persist over a long modulation period and give rise to the observed satellite reflections. These findings highlight a fundamental connection between the intrinsically spatial description of atomic positional modulations in the incommensurate structure and the underlying temporal dynamics.

  • Photochromism in the periodic nanospace of zeolite LTA by the transfer of photoexcited electrons of adsorbed Na atoms

    by Tetsuya Kodaira, Takuji Ikeda

    Cationic Na clusters and related species incorporated into the β-cages of Na-form LTA zeolite exhibit photochromism. Metastable Na clusters with C3v symmetry are formed in α-cages by electron transfer from the initial species in the β-cages.


  • Iridium Catalyst Immobilized on Crosslinked Polyethyleneimine for Continuous Hydrogen Production Using Formic Acid

    by Keito Sawahara, Shinji Tanaka, Tetsuya Kodaira, Ryoichi Kanega, Hajime Kawanami

    Invited for this month's cover is provided by researchers from National Institute of Advanced Industrial Science and Technology (AIST) in Japan. The image shows the flow type continuous hydrogen production from formic acid and power generation by fuel cell achieved by the iridium catalyst immobilized on crosslinked polyethylene imine. The Research Article itself is available at 10.1002/cssc.202301282.


  • Graphene-based crown-cork-like macrostructures

    by Kenta Hiratochi, Daisuke Terada, Hiroshi Suga, Mitsuhiro Okada, Kyoko Bando, Tetsuya Kodaira, Takatoshi Yamada, Tetsuo Shimizu, Koichiro Saiki, Toshitaka Kubo

    In recent years, many attempts have been made to fabricate large and complex three-dimensional carbon structures. The present research demonstrates the formation of novel graphene-based macrostructures having lateral sizes of several tens of micrometers, i.e., crown cork structures consisting of stacks of curved multilayer graphene via a chemical vapor deposition method. Based on the elemental, structural and morphological analyses using Raman spectroscopy, energy dispersive X-ray spectroscopy, scanning electron microscopy, transmission electron microscopy and X-ray diffraction, their origin and formation mechanism are fully discussed. The carburizing Fe at high temperatures in the presence of CH4 initially results in the growth of C precipitates on the Fe substrate surface. At this stage, the Fe substrate exhibits a pearlite structure with thin alternating layers of Fe3C and α-Fe. In contrast, the C precipitates are multilayer graphene with a crystal structure of well crystalline graphite. Providing additional C leads to the continuous growth of graphene flakes extending downward from the periphery of multilayer graphene grains into the bulk direction. This results in a stacked structure comprising curved microcrystals on the Fe surface. Employing a solid-state reaction using Fe as both a catalyst and a substrate, we have found a new growth form in the precipitation process of C in Fe, established a synthesis method, and obtained new hybrid structures that can be used for electromagnetic response substances and long-term anti-corrosion coatings. The fabrication of macrostructures having complex shapes via this technique could allow the design of carbon materials having unique structures with extremely few defects.


  • Open Access

    Iridium Catalyst Immobilized on Crosslinked Polyethyleneimine for Continuous Hydrogen Production Using Formic Acid

    by Keito Sawahara, Shinji Tanaka, Tetsuya Kodaira, Ryoichi Kanega, Hajime Kawanami

    Hydrogen is an alternative fuel that can play a critical role in achieving net zero emissions, leading to global environment sustainability. An iridium‐immobilized catalyst based on polyethyleneimine (PEI) was synthesized and utilized for hydrogen production via formic acid dehydrogenation (FADH). Iridium complex is cross‐linked with its ligand and PEI to form the immobilized catalyst, where the iridium content could be easily varied in the range of 1–10 %. The structure of the iridium‐immobilized catalyst was confirmed using solid‐state NMR, DNP NMR, and FTIR spectroscopies. The iridium‐immobilized catalyst with PEI showed excellent catalytic activity for FADH, exhibiting the catalyst's highest turnover frequency (TOF) value of 73 200 h−1 and a large turnover number (TON) value of over 1 130 000. The catalyst could be used for continuous hydrogen production via FADH, exhibiting high durability for over 2 000 h with TON value of 332 889 without any degradation in catalytic activity. The obtained hydrogen gas was evaluated for power generation using a standard fuel cell, as well as achieved 5 h of stable power generation.