Jia Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jia Li has a total of 214 co-authors. Here are the top co-authors by number of shared publications:
- Xue-Feng Yu
Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences
14 shared publications - Paul. K. Chu
City University of Hong Kong
13 shared publications H. C. Ong
Department of Physics, The Chinese University of Hong Kong, Shatin, Hong Kong, China
7 shared publicationsShuai Sun
College of Engineering Physics
7 shared publicationsZeren Li
College of Engineering Physics
6 shared publicationsHao Huang
Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, P. R. China.
5 shared publications
Latest Publications
- Open Access
- 1 January 2027
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 76 (2)
Highly Sensitive Near-Infrared Phototransistors Based on Self-Assembled Organic Layer Heterojunction for Blood Oxygen Detection
有机近红外光探测器在柔性可穿戴系统中展现出独特适配性,其中光电晶体管因内禀的光门控增益特性备受期待。然而,窄带隙给体中激子解离驱动力不足与有机半导体中激子扩散长度短的叠加效应,导致光生电荷产生与分离效率双低,光门控效应难以充分激活。因此,引入高效激子解离界面是突破近红外有机光电晶体管灵敏度瓶颈的必要途径。本文通过液面自组装转移法构筑了PDPPBTT/PC61BM层异质结,并基于底栅顶接触晶体管架构,系统探究了异质结界面在光生激子解离、电荷俘获及沟道电导调制中的关键作用。在该构型中,P型聚合物半导体PDPPBTT同时作为近红外光吸收层与空穴传输沟道,PC61BM作为电子受体层,二者之间形成的给受体异质结界面为光生激子的高效解离及电子-空穴的空间分离提供了强劲驱动力。材料表征与电学测试结果表明,光生电子可有效转移至PC61BM受体层及界面陷阱态中,形成长寿命空间分离电荷,进而诱导显著的光门控效应,持续调控PDPPBTT沟道内空穴浓度,实现光电流信号的高效放大。得益于上述界面协同增益机制,该器件在近红外光照下展现出优异的光探测性能:响应度最高达1.26×106 A·W-1,在暗电流散粒噪声限制下估算的比探测率达6.96×1015 Jones,响应上升和下降时间分别为0.26 s和0.21 s。进一步地,利用该器件成功实现了透射式光电容积脉搏波信号的采集,并基于双波长PPG信号对血氧饱和度进行了初步估算。上述结果充分表明,给受体层异质结界面调控是突破近红外有机光电晶体管探测性能瓶颈的有效策略,并为其在微弱生理信号检测中的实际应用提供了坚实的实验依据。
- 1 January 2027
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 76 (2)
Open AccessHighly Sensitive Near-Infrared Phototransistors Based on Self-Assembled Organic Layer Heterojunction for Blood Oxygen Detection
有机近红外光探测器在柔性可穿戴系统中展现出独特适配性,其中光电晶体管因内禀的光门控增益特性备受期待。然而,窄带隙给体中激子解离驱动力不足与有机半导体中激子扩散长度短的叠加效应,导致光生电荷产生与分离效率双低,光门控效应难以充分激活。因此,引入高效激子解离界面是突破近红外有机光电晶体管灵敏度瓶颈的必要途径。本文通过液面自组装转移法构筑了PDPPBTT/PC61BM层异质结,并基于底栅顶接触晶体管架构,系统探究了异质结界面在光生激子解离、电荷俘获及沟道电导调制中的关键作用。在该构型中,P型聚合物半导体PDPPBTT同时作为近红外光吸收层与空穴传输沟道,PC61BM作为电子受体层,二者之间形成的给受体异质结界面为光生激子的高效解离及电子-空穴的空间分离提供了强劲驱动力。材料表征与电学测试结果表明,光生电子可有效转移至PC61BM受体层及界面陷阱态中,形成长寿命空间分离电荷,进而诱导显著的光门控效应,持续调控PDPPBTT沟道内空穴浓度,实现光电流信号的高效放大。得益于上述界面协同增益机制,该器件在近红外光照下展现出优异的光探测性能:响应度最高达1.26×106 A·W-1,在暗电流散粒噪声限制下估算的比探测率达6.96×1015 Jones,响应上升和下降时间分别为0.26 s和0.21 s。进一步地,利用该器件成功实现了透射式光电容积脉搏波信号的采集,并基于双波长PPG信号对血氧饱和度进行了初步估算。上述结果充分表明,给受体层异质结界面调控是突破近红外有机光电晶体管探测性能瓶颈的有效策略,并为其在微弱生理信号检测中的实际应用提供了坚实的实验依据。
- 8 August 2026
- Published by Wiley in Laser & Photonics Reviews
- p. e71701
Twin‐Image Free Multichannel Vectorial Holography With Nonlinear Chiroptical Metasurfaces
Multichannel vectorial holography has essential applications in the fields of optical information processing and optical communications. With the development of metasurface devices, multiple vortex beams and holographic images with vectorial polarization distributions have been demonstrated in both linear and nonlinear optical regimes. However, most of the metasurface‐based vectorial holography experiences twin‐image problem, affecting the polarization contrast, image quality, and so on. Here, we demonstrate the twin‐image free multichannel vectorial holography with nonlinear chiroptical metasurfaces, which consist of pairs of enantiomeric meta‐atoms. Such meta‐atoms provide two independent channels that rely on the giant circular dichroism effect in second harmonic generation processes for manipulating the amplitude and phase of the nonlinear optical waves. By combining the concept of nonlinear geometric phase and the Gerchberg–Saxton algorithm, the twin‐image free multichannel vectorial vortex beams and holographic images are realized. The proposed nonlinear chiroptical metasurface platform may open new routes to develop ultracompact and multifunctional devices for high‐capacity optical information processing and data storage.
- 8 August 2026
- Published by Wiley in Laser & Photonics Reviews
- p. e71701
Twin‐Image Free Multichannel Vectorial Holography With Nonlinear Chiroptical Metasurfaces
Multichannel vectorial holography has essential applications in the fields of optical information processing and optical communications. With the development of metasurface devices, multiple vortex beams and holographic images with vectorial polarization distributions have been demonstrated in both linear and nonlinear optical regimes. However, most of the metasurface‐based vectorial holography experiences twin‐image problem, affecting the polarization contrast, image quality, and so on. Here, we demonstrate the twin‐image free multichannel vectorial holography with nonlinear chiroptical metasurfaces, which consist of pairs of enantiomeric meta‐atoms. Such meta‐atoms provide two independent channels that rely on the giant circular dichroism effect in second harmonic generation processes for manipulating the amplitude and phase of the nonlinear optical waves. By combining the concept of nonlinear geometric phase and the Gerchberg–Saxton algorithm, the twin‐image free multichannel vectorial vortex beams and holographic images are realized. The proposed nonlinear chiroptical metasurface platform may open new routes to develop ultracompact and multifunctional devices for high‐capacity optical information processing and data storage.
- 29 April 2026
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 98 (18) , 13526-13535
Sensitive Colorimetric Biosensors Based on Perovskite Heterojunction Phototransistors
Colorimetry has held an important position in biomolecule detection due to its broad applicability, operational simplicity, and intuitively interpretable results. However, conventional colorimetric analysis relies heavily on bulky and complex facilities, which hinder miniaturization and limit its use for on-site rapid detection. Moreover, its sensitivity and dynamic range are constrained by the performance of traditional photodetectors. To address these limitations, this study introduces a novel colorimetric platform based on perovskite heterojunction phototransistors (PHP). Leveraging their inherent signal amplification as three-terminal devices, PHP can sensitively detect subtle absorbance variations induced by biomolecular reactions. The biosensing performance was evaluated through the detection of human immunoglobulin G (IgG) and glucose, achieving detection limits of 0.24 pM and 25.1 nM, respectively, and a dynamic range spanning 6 orders of magnitude─significantly surpassing conventional colorimetric systems. The proposed biosensor also exhibits high specificity and is low-cost and easy to operate, offering a promising avenue for the application of high-performance phototransistor-based biosensors in healthcare and early disease diagnosis.
- 29 April 2026
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 98 (18) , 13526-13535
Sensitive Colorimetric Biosensors Based on Perovskite Heterojunction Phototransistors
Colorimetry has held an important position in biomolecule detection due to its broad applicability, operational simplicity, and intuitively interpretable results. However, conventional colorimetric analysis relies heavily on bulky and complex facilities, which hinder miniaturization and limit its use for on-site rapid detection. Moreover, its sensitivity and dynamic range are constrained by the performance of traditional photodetectors. To address these limitations, this study introduces a novel colorimetric platform based on perovskite heterojunction phototransistors (PHP). Leveraging their inherent signal amplification as three-terminal devices, PHP can sensitively detect subtle absorbance variations induced by biomolecular reactions. The biosensing performance was evaluated through the detection of human immunoglobulin G (IgG) and glucose, achieving detection limits of 0.24 pM and 25.1 nM, respectively, and a dynamic range spanning 6 orders of magnitude─significantly surpassing conventional colorimetric systems. The proposed biosensor also exhibits high specificity and is low-cost and easy to operate, offering a promising avenue for the application of high-performance phototransistor-based biosensors in healthcare and early disease diagnosis.
- 20 June 2025
- Published by Wiley in Physica Status Solidi (RRL) – Rapid Research Letters
- Vol. 19 (9)
Near‐Infrared Organic Phototransistors Based on Thermally Evaporated Planar Heterojunctions
Heterostructures are widely used in organic phototransistors (OPTs) to balance carrier dynamics, including exciton dissociation, transport, and recombination inhibition. Planar heterojunctions (PHJs) offer direct pathways and fewer recombination sites for photo‐induced carriers. However, PHJ‐based OPTs' performance remains unsatisfactory due to challenges in achieving high‐quality organic planar interfaces with uniformity, large area, low roughness, and low defect density. Herein, a PHJ structure is designed for near‐infrared (NIR) photodetection. The PHJ consists of a polymer semiconductor, PDPPBTT, and a fullerene derivative, PC 61 BM. The PDPPBTT acts as the NIR photoactive layer, electron donor, and channel, while PC 61 BM is the acceptor. A simple evaporation technique is developed to deposit the PC 61 BM film on PDPPBTT to form a stable and uniform planar interface. Owing to the balanced dynamic characteristics, highly sensitive NIR photodetection is achieved as demonstrated by peak photosensitivity of 2.59 × 10 4 , photoresponsivity of 1.42 × 10 5 A W −1 , detectivity of 1.83 × 10 16 Jones upon weak irradiation of 0.072 μW cm −2 . To confirm the practicality of NIR imaging, a 7 × 7 array device is demonstrated. The results reveal a simple and effective strategy to prepare high‐performance PHJ‐based OPTs and provide insights into the development of advanced photodetection and imaging systems.
- 20 June 2025
- Published by Wiley in Physica Status Solidi (RRL) – Rapid Research Letters
- Vol. 19 (9)
Near‐Infrared Organic Phototransistors Based on Thermally Evaporated Planar Heterojunctions
Heterostructures are widely used in organic phototransistors (OPTs) to balance carrier dynamics, including exciton dissociation, transport, and recombination inhibition. Planar heterojunctions (PHJs) offer direct pathways and fewer recombination sites for photo‐induced carriers. However, PHJ‐based OPTs' performance remains unsatisfactory due to challenges in achieving high‐quality organic planar interfaces with uniformity, large area, low roughness, and low defect density. Herein, a PHJ structure is designed for near‐infrared (NIR) photodetection. The PHJ consists of a polymer semiconductor, PDPPBTT, and a fullerene derivative, PC 61 BM. The PDPPBTT acts as the NIR photoactive layer, electron donor, and channel, while PC 61 BM is the acceptor. A simple evaporation technique is developed to deposit the PC 61 BM film on PDPPBTT to form a stable and uniform planar interface. Owing to the balanced dynamic characteristics, highly sensitive NIR photodetection is achieved as demonstrated by peak photosensitivity of 2.59 × 10 4 , photoresponsivity of 1.42 × 10 5 A W −1 , detectivity of 1.83 × 10 16 Jones upon weak irradiation of 0.072 μW cm −2 . To confirm the practicality of NIR imaging, a 7 × 7 array device is demonstrated. The results reveal a simple and effective strategy to prepare high‐performance PHJ‐based OPTs and provide insights into the development of advanced photodetection and imaging systems.
- 12 June 2025
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 12 (18) , 7221-7243
Recent progress in perovskite photodetectors: from carrier dynamics to device structures and applications
Types and applications of perovskite photodetectors.
- 12 June 2025
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 12 (18) , 7221-7243
Recent progress in perovskite photodetectors: from carrier dynamics to device structures and applications
Types and applications of perovskite photodetectors.
- 29 April 2025
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 12 (5) , 2727-2735
Polarization-Sensitive Photodetectors Enabled by Plasmonic Metasurface Integrated Organic Photodiodes
- 29 April 2025
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 12 (5) , 2727-2735
Polarization-Sensitive Photodetectors Enabled by Plasmonic Metasurface Integrated Organic Photodiodes
- Open Access
- 10 April 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (14)
Nonvolatile memory based on two-dimensional perovskite/organic polymer layered-heterojunction transistors
A nonvolatile memory device based on a layered-heterojunction transistor composed of two-dimensional Ruddlesden–Popper-phase perovskite and polymeric semiconducting films is fabricated. The intrinsic quantum wells in the two-dimensional perovskite act as charge-trapping layers to capture and store carriers when the device is biased, while the thin polymeric semiconducting film is the channel layer. The carrier transport and storage properties during gating are optimized, and the memory properties can be readily modulated. The memory device exhibits hysteresis transfer curves with a maximum storage window of 117 V and a current switching ratio of 102. The results reveal a simple and effective device structure and provide insights into the development of nonvolatile memory devices.
- 10 April 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (14)
Open AccessNonvolatile memory based on two-dimensional perovskite/organic polymer layered-heterojunction transistors
A nonvolatile memory device based on a layered-heterojunction transistor composed of two-dimensional Ruddlesden–Popper-phase perovskite and polymeric semiconducting films is fabricated. The intrinsic quantum wells in the two-dimensional perovskite act as charge-trapping layers to capture and store carriers when the device is biased, while the thin polymeric semiconducting film is the channel layer. The carrier transport and storage properties during gating are optimized, and the memory properties can be readily modulated. The memory device exhibits hysteresis transfer curves with a maximum storage window of 117 V and a current switching ratio of 102. The results reveal a simple and effective device structure and provide insights into the development of nonvolatile memory devices.
- 13 August 2024
- Published by Optica Publishing Group in Biomedical Optics Express
- Vol. 15 (9) , 5215-5226
Rapid, sensitive and multiplexed detection of SARS-CoV-2 viral nucleic acids enabled by phase-based surface plasmon resonance of metallic gratings
A rapid, sensitive and easy-to-implement approach is proposed for the detection of pathogenic nucleic acids based on phase-based plasmonic spectroscopy of metallic gratings. The plasmonic sensors were fabricated using interference lithography and functionalized with single-stranded DNA probes to specific target SARS-CoV-2. The biosensor achieved the detection of 40 fM viral nucleic acids within 5 min; furthermore, a detection capability of 1 aM (0.6 copies/µL) was acquired when combining with the recombinase polymerase amplification. Additionally, the multiplexed sensing system was demonstrated to simultaneously detect three genomic sequences on a single sensor chip, thereby enhancing diagnostic accuracy and enabling high-throughput detection.
- 13 August 2024
- Published by Optica Publishing Group in Biomedical Optics Express
- Vol. 15 (9) , 5215-5226
Rapid, sensitive and multiplexed detection of SARS-CoV-2 viral nucleic acids enabled by phase-based surface plasmon resonance of metallic gratings
A rapid, sensitive and easy-to-implement approach is proposed for the detection of pathogenic nucleic acids based on phase-based plasmonic spectroscopy of metallic gratings. The plasmonic sensors were fabricated using interference lithography and functionalized with single-stranded DNA probes to specific target SARS-CoV-2. The biosensor achieved the detection of 40 fM viral nucleic acids within 5 min; furthermore, a detection capability of 1 aM (0.6 copies/µL) was acquired when combining with the recombinase polymerase amplification. Additionally, the multiplexed sensing system was demonstrated to simultaneously detect three genomic sequences on a single sensor chip, thereby enhancing diagnostic accuracy and enabling high-throughput detection.
- Open Access
- 24 June 2024
- Published by Wiley in Advanced Electronic Materials
- Vol. 10 (10)
Organic Visible‐Blind Ultraviolet Photodiodes and Pixel‐Array Imagers Based on [1]Benzothieno[3,2‐b]Benzothiophene (BTBT) Derivatives
Visible‐blind ultraviolet (VBUV) photodetectors are designed for UV detection without responding to visible light, thus having many applications in communications, flame detection, environment monitoring, and astronomy. Herein, an organic device concept based on the bulk heterojunction (BHJ) photodiode is presented for high‐performance VBUV photodetection and imaging. The BHJ, comprised of an organic electron donor, 2,7‐dioctyl[1]benzothieno[3,2‐b][1]benzothiophene (C8‐BTBT), and an electron acceptor, indene‐C60 bisadduct (ICBA), shows efficient generation and transport of free charges upon UV irradiation. The organic photodiode (OPD) delivers exceptional VBUV photodetection performance. At a low voltage of −0.5 V, the device exhibits a wide linear dynamic range of 98.15 dB. Furthermore, the OPD can detect ultra‐low light intensities down to 0.58 µW cm−2 with a high photoresponsivity of 0.12 A W−1 and specific detectivity of 2.75 × 1012 Jones. More importantly, by integrating the OPD with a readout integrated circuit, the pixel‐array organic VBUV imager is demonstrated to have high‐quality imaging capability. The results reveal a novel strategy to design VBUV photodetectors and imagers with balanced performance, cost, area, flexibility, and power consumption.
- 24 June 2024
- Published by Wiley in Advanced Electronic Materials
- Vol. 10 (10)
Open AccessOrganic Visible‐Blind Ultraviolet Photodiodes and Pixel‐Array Imagers Based on [1]Benzothieno[3,2‐b]Benzothiophene (BTBT) Derivatives
Visible‐blind ultraviolet (VBUV) photodetectors are designed for UV detection without responding to visible light, thus having many applications in communications, flame detection, environment monitoring, and astronomy. Herein, an organic device concept based on the bulk heterojunction (BHJ) photodiode is presented for high‐performance VBUV photodetection and imaging. The BHJ, comprised of an organic electron donor, 2,7‐dioctyl[1]benzothieno[3,2‐b][1]benzothiophene (C8‐BTBT), and an electron acceptor, indene‐C60 bisadduct (ICBA), shows efficient generation and transport of free charges upon UV irradiation. The organic photodiode (OPD) delivers exceptional VBUV photodetection performance. At a low voltage of −0.5 V, the device exhibits a wide linear dynamic range of 98.15 dB. Furthermore, the OPD can detect ultra‐low light intensities down to 0.58 µW cm−2 with a high photoresponsivity of 0.12 A W−1 and specific detectivity of 2.75 × 1012 Jones. More importantly, by integrating the OPD with a readout integrated circuit, the pixel‐array organic VBUV imager is demonstrated to have high‐quality imaging capability. The results reveal a novel strategy to design VBUV photodetectors and imagers with balanced performance, cost, area, flexibility, and power consumption.