CBCraig D. Beidler

Craig D. Beidler

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Craig D. Beidler has a total of 371 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Implementation of Pfirsch-Schlüter Parallel Flow in X-ray Imaging Crystal Spectrometer Inversion Analysis

    by Courtney Lynn Johnson, Novimir Antoniuk Pablant, Andreas Langenberg, Jaime de la Riva Villén, Arturo Alonso, Tomas Gonda, Oliver Patrick Ford, Andreas Dinklage, Craig D Beidler

    The x-ray imaging crystal spectrometer (XICS) tomographic inversion code for Wendelstein 7-X has been modified to consider the effects of parallel flows and has been applied to analyze measurements taken during recent experimental campaigns. Previous analysis neglected the effects of parallel flows due to the primarily perpendicular geometry of the sightlines and the small magnitude predicted by neoclassical theory. To reconsider these effects, the incompressibility condition for plasma flows is used to calculate the parallel Pfirsch-Schlüter flow component for the equilibrium configuration. By incorporating this condition along with the geometry of the sightlines - i.e., the fractional contributions of perpendicular and parallel flows -, an updated expression for the measured flow is used for the profile inversion. Application of this modified inversion code to data from W7-X shows that the magnitude of the radial electric field and the flux surface averaged perpendicular flow are reduced by approximately a factor of 2 and brought into better agreement with neoclassical predictions and charge exchange recombination spectroscopy measurements.

  • Open Access

    Enhanced performance in quasi-isodynamic max- J stellarators with a turbulent particle pinch

    by G. G. Plunk, A. G. Goodman, P. Xanthopoulos, P. Costello, H. M. Smith, K. Aleynikova, C. D. Beidler, M. Drevlak, S. Stroteich, P. Helander

    Recent stellarator reactor designs demonstrate mostly outward turbulent particle transport, which, without advanced fueling technology, inhibits the formation of density gradients needed for confinement. We introduce “SQuID- τ ,” a self-fueling quasi-isodynamic stellarator capable of sustaining density peaking through inward particle transport caused by turbulence. Temperature and density profile predictions based on high-fidelity gyrokinetic simulations demonstrate enhanced performance, significantly relaxing constraints on the size and magnetic field strength for reactor designs.


  • Open Access

    A quasi-isodynamic stellarator configuration towards a fusion power plant

    by Alan G. Goodman, Gabriel G. Plunk, Pavlos Xanthopoulos, Michael Drevlak, Joachim Geiger, Robert Davies, Håkan M. Smith, Carolin Nührenberg, Craig D. Beidler, Sophia A. Henneberg, et al.

    This work demonstrates that magnetohydrodynamic (MHD) stable, quasi-isodynamic (QI) stellarator equilibria with reduced turbulence can be generated with an optimised coilset. We present one such equilibrium which, when being generated by coils, maintains the benefits of its excellent QI quality (low neoclassical transport at small particle collisionality net toroidal current and good fast-particle confinement) while demonstrating ideal-MHD stability and lower ion-temperature-gradient-driven turbulent heat flux than W7-X. As a consequence of its optimised rotational transform profile, this plasma equilibrium has nested flux surfaces and a chain of large islands at the plasma’s edge, for which we present an island divertor design. It additionally features an electron root – a large region in the plasma core in which the radial electric field points outwards, towards the plasma boundary – which provides a potential solution for preventing impurity accumulation in a fusion device.


  • Open Access

    On the convergence of bootstrap current to the Shaing–Callen limit in stellarators

    by Christopher G. Albert, Craig D. Beidler, Gernot Kapper, Sergei V. Kasilov, Winfried Kernbichler

    The bootstrap current in stellarators can be presented as a sum of a collisionless value given by the Shaing–Callen asymptotic formula and an off-set current, which non-trivially depends on plasma collisionality and radial electric field. Using NEO-2 modeling, analytical estimates and semi-analytical studies with the help of a propagator method, it is shown that the off-set current in the $1/\nu$ regime does not converge with decreasing collisionality $\nu _\ast$ but rather shows oscillations over $\log \nu _\ast$ with an amplitude of the order of the bootstrap current in an equivalent tokamak. The convergence to the Shaing–Callen limit appears in regimes with significant orbit precession, in particular, due to a finite radial electric field, where the off-set current decreases as $\nu _\ast ^{3/5}$ . The off-set current strongly increases in case of nearly aligned magnetic field maxima on the field line where it diverges as $\nu _\ast ^{-1/2}$ in the $1/\nu$ regime and saturates due to the precession at a level exceeding the equivalent tokamak value by ${v_E^\ast }^{-1/2}$ , where $v_E^\ast$ is the perpendicular Mach number. The latter off-set, however, can be minimized by further aligning the local magnetic field maxima and by fulfilling an extra integral condition of “equivalent ripples” for the magnetic field. A criterion for the accuracy of this alignment and of ripple equivalence is derived. In addition, the possibility of the bootstrap effect at the magnetic axis caused by the above off-set is also discussed.


  • Open Access

    Electron root optimisation for stellarator reactor designs

    by E. Lascas Neto, R. Jorge, C.D. Beidler, J. Lion

    In this work, we propose a method for optimising stellarator devices to favour the presence of an electron root solution of the radial electric field. Such a solution can help avoid heavy impurity accumulation, improve neoclassical thermal ion confinement and helium ash exhaust, and possibly reduce turbulence. This study shows that an optimisation for such a root is possible in quasi-isodynamic stellarators. Examples are shown for both vacuum and finite plasma pressure configurations.


  • Open Access

    Optimised stellarators with a positive radial electric field

    by P. Helander, A.G. Goodman, C.D. Beidler, M Kuczynski, H.M. Smith

    We draw attention to an interesting possibility in the design and operation of stellarator fusion reactors, which has hitherto been considered unrealistic under burning-plasma conditions. Thanks to recent advances in stellarator optimisation theory, it appears possible to create a positive (outward-pointing) radial electric field in the plasma core by carefully tailoring the geometry of the magnetic field. This electric field is likely to expel highly charged impurities from the centre of the plasma through neoclassical transport and thus eliminate, or at least mitigate, a long-standing problem in stellarator physics. Further out, the electric field is expected to suddenly change sign from positive to negative, thus creating a region of strongly sheared flow, which could locally suppress turbulent transport and enhance overall energy confinement.


  • Open Access

    Reduction of neoclassical bulk-ion transport to avoid helium-ash retention in stellarator reactors

    by C.D. Beidler, M. Drevlak, J. Geiger, P. Helander, H.M. Smith, Y. Turkin

    The reduction of neoclassical energy transport in stellarators has traditionally focussed on optimizing magnetic fields for small values of ‘effective helical ripple’ — ϵ eff , the geometric factor associated with electron 1 / ν transport—and relying on the radial electric field, E r , needed to maintain ambipolarity in the plasma, to simultaneously diminish ion energy losses to a tolerable level. As one must generally expect E r < 0 , such a strategy has a drawback for reactor operation, however, as negative values of E r tend to hinder the exhaust of helium ash, and this will become intolerable if it results in excessive fuel dilution. Theoretically, one can show that the neoclassical transport of low-Z impurities depends critically on the ratio L 11 e / L 11 i , where the L 11 σ are the neoclassical particle diffusion coefficients of the bulk-plasma electrons ( σ = e ) and ions ( σ = i ). Increasing the value of this ratio is shown here to counteract impurity retention, but maintaining good confinement of the bulk species requires this to be achieved by decreasing L 11 i rather than increasing L 11 e , implying the need for more than just minimization of ϵ eff in reactor design. To assess the prospects of such an endeavor, a predictive 1-D transport code is used here to determine the range of L 11 e / L 11 i values which arises in simulations of conventionally optimized reactor candidates. This range is found to be considerable, and includes examples with L 11 e / L 11 i values large enough to provide neoclassical temperature screening of the helium ash and even to flip the sign of the neoclassical convective velocity from inward- to outward-directed. More intriguingly, the strong reduction of L 11 i in such cases can also lead to the appearance of E r > 0 (a so-called ‘electron root’) within the core of plasmas having central densities as large as 2 × 10 20 m−3. Having E r > 0 in the plasma core produces the ideal situation in which all thermodynamic forces aid in the exhaust of helium ash, although this benefit is tempered by the small values of L 11 z which accompany an electron root (where σ = z denotes helium ash). Means are discussed for improving the results presented here, so that avoiding helium-ash retention can be explicitly targeted in future reactor optimizations.


  • Open Access

    Direct optimization of neoclassical ion transport in stellarator reactors

    by B.F. Lee, S.A. Lazerson, H.M. Smith, C.D. Beidler, N.A. Pablant

    We directly optimize stellarator neoclassical ion transport while holding neoclassical electron transport at a moderate level, creating a scenario favorable for impurity expulsion and retaining good ion confinement. Traditional neoclassical stellarator optimization has focused on minimizing ϵeff, the geometric factor that characterizes the amount of radial transport due to particles in the 1/νregime. Under expected reactor-relevant conditions, core electrons will be in the 1/νregime and core fuel ions will be in the νregime. Traditional optimizations thus minimize electron transport and rely on the radial electric field (Er) that develops to confine the ions. This often results in an inward-pointingErthat drives high-Zimpurities into the core, which may be troublesome in future reactors. In this work, we increase the ratio of the thermal transport coefficients L11e/L11i, which previous research has shown can create an outward-pointingEr. This effect is very beneficial for impurity expulsion. We obtain self-consistent density, temperature, andErprofiles at reactor-relevant conditions for an optimized equilibrium. This equilibrium is expected to enjoy significantly improved impurity transport properties.


  • Open Access

    Conditions and benefits of X-point radiation for the island divertor

    by Y. Feng, V. Winters, D. Zhang, J. Geiger, Y. Gao, D. Reiter, P. Helander, C.D. Beidler, M. Endler, D. Gradic, et al.

    We present a method to geometrically quantify the three magnetic island chains with the poloidal mode numbersm= 4, 5, and 6 (referred to in this paper as high-iota, standard, and low-iota islands, respectively), on which the W7-X divertor relies. The focus is on a comparative study of their detachment performance using a series of models of different physical and geometrical complexity, ranging from one- to three-dimensional (1D to 3D). In particular, it aims to identify the key physical elements behind the correlation between impurity radiation and island geometry and the associated detachment stability. Assuming intrinsic carbon as a radiator, we scan the three island chains with the EMC3-Eirene code based on otherwise identical code inputs. We find that the three islands behave differently in the radiation distribution, in the development of the radiation zones during detachment, and in the ‘radiation costs’, defined as the product of impurity and electron density near the last closed flux surface. While the radiation costs for the iota = 5/4 and 5/5 island chains linearly increase with the total radiation, the low-iota island with iota = 5/6 shows a bifurcation behavior in the sense that the radiation costs initially increase and then decrease when the total radiation exceeds a critical level. Consistent with the numerical trends, stable detachment, which is experimentally easy and robust to achieve with the standard iota = 5/5 island chain, remains an experimental challenge with the low-iota configuration. Dedicated numerical experiments show that the recycling neutrals and the ratio of parallel to perpendicular heat transport, which depends closely on the field line pitch, play a significant role in the formation and evolution of the radiation layer. A deeper understanding of the underlying physics relies on simpler models that explain why and how flux expansion can reduce the radiation costs. From these insights, we derive the conditions in which detached plasmas can benefit from the expansion of flux surfaces around the X-point. We show and explain why the current divertor design limits the actual capability of the high-iota configuration and propose solutions. The work is presented within a theoretical/numerical framework but cites relevant experimental evidence to emphasize its practical significance.


  • Open Access

    Observation of impurity accumulation and its compatibility with high plasma performance in W7-X

    by D Zhang, B Buttenschön, S Jablonski, M Kubkowska, O Ford, J A Alcusón, C D Beidler, R Burhenn, M N A Beurskens, A Langenberg, et al.

    At the W7-X stellarator, the bolometer system has measured an intensive radiation zone in the inner plasma region (at a normalized radius ρ ∼ 0.3–0.4) in the hydrogen plasma generated by electron cyclotron resonance heating; it differs from the normal plasma radiation distribution with an edge-localized emission zone. Spectroscopic diagnostics have recorded high-Z elements such as iron. This phenomenon happens in the plasma phases after gas supply turn-off, which results in all impurity relevant diagnostic signals increasing for several seconds. Despite the enhancement of the core radiation, the plasma energy confinement is improved. A transport analysis shows that this impurity radiation behavior is associated with a low diffusion coefficient (D∼ 0.02 m2 s−1) and a reversal of the convection around the radial position of the emission peak, which, under normal conditions, separates the zones of outward convection in the central (|V| ∼ 0.1 m s−1) and inward convection in the outer region (|V| ∼ 0.3 m s−1). An impurity accumulation around this radial position has been identified. The transport coefficients obtained are comparable with the theoretical predictions of collisional impurity transport. In the plasma phases studied, both impurity and energy confinement are enhanced. The mechanism responsible for the improvement is believed to be a reduction of micro-instabilities associated with the observed steepening of the density profile, initiated by a low edge plasma density (19 m−3) after switching off the gas fueling. The normalized temperature and density gradients fulfil the condition for the suppression of ITG turbulence.