Chaitanya Kaluram Kanade
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chaitanya Kaluram Kanade has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Taesung Kim
SKKU Advanced Institute of Nanotechnology (SAINT) Sungkyunkwan University Suwon South Korea
4 shared publications - Vinit Kanade
SKKU Advanced Institute of Nanotechnology (SAINT), Sungkyunkwan University, 2066 Seobu-ro, Jangan-gu, Suwon-si, Gyeonggi-do 16419, Republic of Korea
3 shared publications - Hyeong-U Kim
Semiconductor Manufacturing Research Center, Korea Institute of Machinery and Materials (KIMM), Daejeon 34103, Republic of Korea
2 shared publications - Hyunho Seok
Research Laboratory of Electronics, Massachusetts Institute of Technology Cambridge Massachusetts USA
2 shared publications - Amol B. Tambe
Centre for Materials for Electronics Technology (C-MET), Off Pashan Road, Panchwati, Pune 411008, Maharashtra, India
1 shared publication - Amol G. Kadlag
Department of Chemistry and Research Centre, S. N. Arts, D. J. Malpani Commerce and B. N. Sarda Science College, Sangamner-422605, Maharashtra, India
1 shared publication
Latest Publications
- 20 November 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 197
Coherent design of NiO/g-C3N4 based nano heterojunction photocatalyst for hydrogen generation
- 20 November 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 197
Coherent design of NiO/g-C3N4 based nano heterojunction photocatalyst for hydrogen generation
- Open Access
- 7 October 2023
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 15 (43) , 17326-17334
Synthesis of multiphase MoS 2 heterostructures using temperature-controlled plasma-sulfurization for photodetector applications
A change in the stacking sequence of the vacancy-rich 2H and 1T phase greatly influences the photoperformance. The efficient charge transfer mechanism revealed the highest 1T/2H-MoS 2 heterostructure photocurrent.
- 7 October 2023
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 15 (43) , 17326-17334
Open AccessSynthesis of multiphase MoS 2 heterostructures using temperature-controlled plasma-sulfurization for photodetector applications
A change in the stacking sequence of the vacancy-rich 2H and 1T phase greatly influences the photoperformance. The efficient charge transfer mechanism revealed the highest 1T/2H-MoS 2 heterostructure photocurrent.
- 18 January 2023
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 35 (3) , 1016-1028
First-Principles Calculation Guided High-Purity Layer Control of 4 in. MoS2 by Plasma RIE
- 18 January 2023
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 35 (3) , 1016-1028
First-Principles Calculation Guided High-Purity Layer Control of 4 in. MoS2 by Plasma RIE
- 10 February 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (7) , 8710-8717
Low-Temperature and Large-Scale Production of a Transition Metal Sulfide Vertical Heterostructure and Its Application for Photodetectors
The conventional synthesis of two-dimensional (2D) transition metal dichalcogenide (TMDC) heterostructures is low yielding and lack the heterojunction interface quality. The chemical vapor deposition (CVD) techniques have achieved high-quality heterostructure interfaces but require a high synthesis temperature (>600 °C) and have a low yield of heterostructures. Therefore, the large scale and high interface quality of TMDC heterojunctions using low-temperature synthesis methods are in demand. Here, high-quality, wafer-scale MoS2 and WS2 heterostructures with 2D interfaces were prepared by a one-step sulfurization of the molybdenum (Mo) and tungsten (W) precursors via plasma-enhanced CVD at a relatively low temperature (150 °C). The 4 inch wafer-scale synthesis of the MoS2–WS2 heterostructures was validated using various spectroscopic and microscopic techniques. Further, the photocurrent generation and photoswitching phenomenon of the so-obtained MoS2–WS2 heterostructures were studied. The photodevice prepared by the MoS2–WS2 heterostructures at 150 °C showed a photoresponsivity of 83.75 mA/W. The excellent photoresponse and faster photoswitching highlight the advantage of MoS2–WS2 heterostructures toward advanced photodetectors.
- 10 February 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (7) , 8710-8717
Low-Temperature and Large-Scale Production of a Transition Metal Sulfide Vertical Heterostructure and Its Application for Photodetectors
The conventional synthesis of two-dimensional (2D) transition metal dichalcogenide (TMDC) heterostructures is low yielding and lack the heterojunction interface quality. The chemical vapor deposition (CVD) techniques have achieved high-quality heterostructure interfaces but require a high synthesis temperature (>600 °C) and have a low yield of heterostructures. Therefore, the large scale and high interface quality of TMDC heterojunctions using low-temperature synthesis methods are in demand. Here, high-quality, wafer-scale MoS2 and WS2 heterostructures with 2D interfaces were prepared by a one-step sulfurization of the molybdenum (Mo) and tungsten (W) precursors via plasma-enhanced CVD at a relatively low temperature (150 °C). The 4 inch wafer-scale synthesis of the MoS2–WS2 heterostructures was validated using various spectroscopic and microscopic techniques. Further, the photocurrent generation and photoswitching phenomenon of the so-obtained MoS2–WS2 heterostructures were studied. The photodevice prepared by the MoS2–WS2 heterostructures at 150 °C showed a photoresponsivity of 83.75 mA/W. The excellent photoresponse and faster photoswitching highlight the advantage of MoS2–WS2 heterostructures toward advanced photodetectors.
- 1 May 2019
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2019-01 (29) , 1381
Low Temperature Synthesis of WS2 Using PECVD for Hydrogen Evolution Catalysis
Hydrogen holds tremendous promise as one of many alternatives for clean energy generation with high energy density and zeroes environmental impact. Hydrogen can be easily produced by using Platinum-based catalyst to efficiently lowers the large potential of electrolysis, but confined due to scarce and expensiveness. Transition metal dichalcogenides (TMDCs) such as MX2 (M stands for Mo or W, Nb, Ta etc. and X= S, Se etc.) is essential materials which show promising catalytic activity. The bond between the metal and the chalcogen is a covalent bond, and the three layers themselves are held together by a weak van der Waals force. Tungsten Disulfide (WS2) is a representative transition metal dichalcogenide (TMDC), has been freshly pursued as one of the promising alternatives for hydrogen evolution reaction (HER). Tungsten Disulfide is one of the promising TMDC materials due to its various application in electronics, catalysis, optical and other fields. The WS2 elements were previously synthesized by different processes such as mechanical exfoliation, chemical exfoliation, chemical vapor deposition etc. In this work, we report a strategy for synthesis few layers of WS2 at relatively low temperature (300 °C) using plasma enhanced chemical vapor deposition (PECVD) technique. The PECVD technology utilized to grow WS2 thin film directly on the 4-inch Si-SiO2 wafer. The quality of a synthesized WS2 was characterized by Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), High-resolution transmission electron microscopy (HR-TEM), and energy dispersive spectrometry (EDS) mapping. The thickness of the synthesized WS2 film was found to be around a few nanometers and showed multilayered structure (~5-6 layers). The PECVD shows the advantage for the large area synthesis of WS2 thin film with high uniformity, purity, and reproducibility for the mass production. The PECVD technology utilized to directly grown on glassy carbon electrode (GCE) for analysis of HER performance without any transfer process. The catalysis shows overpotential (η) of 0.50 V and Tafel slope 122.0 mV/decade. The HER performance of synthesized films was similar or higher when compared with drop casting technique. Figure 1
- 1 May 2019
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2019-01 (29) , 1381
Low Temperature Synthesis of WS2 Using PECVD for Hydrogen Evolution Catalysis
Hydrogen holds tremendous promise as one of many alternatives for clean energy generation with high energy density and zeroes environmental impact. Hydrogen can be easily produced by using Platinum-based catalyst to efficiently lowers the large potential of electrolysis, but confined due to scarce and expensiveness. Transition metal dichalcogenides (TMDCs) such as MX2 (M stands for Mo or W, Nb, Ta etc. and X= S, Se etc.) is essential materials which show promising catalytic activity. The bond between the metal and the chalcogen is a covalent bond, and the three layers themselves are held together by a weak van der Waals force. Tungsten Disulfide (WS2) is a representative transition metal dichalcogenide (TMDC), has been freshly pursued as one of the promising alternatives for hydrogen evolution reaction (HER). Tungsten Disulfide is one of the promising TMDC materials due to its various application in electronics, catalysis, optical and other fields. The WS2 elements were previously synthesized by different processes such as mechanical exfoliation, chemical exfoliation, chemical vapor deposition etc. In this work, we report a strategy for synthesis few layers of WS2 at relatively low temperature (300 °C) using plasma enhanced chemical vapor deposition (PECVD) technique. The PECVD technology utilized to grow WS2 thin film directly on the 4-inch Si-SiO2 wafer. The quality of a synthesized WS2 was characterized by Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), High-resolution transmission electron microscopy (HR-TEM), and energy dispersive spectrometry (EDS) mapping. The thickness of the synthesized WS2 film was found to be around a few nanometers and showed multilayered structure (~5-6 layers). The PECVD shows the advantage for the large area synthesis of WS2 thin film with high uniformity, purity, and reproducibility for the mass production. The PECVD technology utilized to directly grown on glassy carbon electrode (GCE) for analysis of HER performance without any transfer process. The catalysis shows overpotential (η) of 0.50 V and Tafel slope 122.0 mV/decade. The HER performance of synthesized films was similar or higher when compared with drop casting technique. Figure 1
- Open Access
- 27 November 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (69) , 39749-39755
Hierarchical nanostructures of nitrogen-doped molybdenum sulphide for supercapacitors
Flower-like nanostructures of molybdenum disulphide (MoS2) have been effectively synthesised by the hydrothermal method and further doped with nitrogen using varying concentrations of urea. The formed hierarchical nanostructures are characterised by spectroscopy as well as electrochemical techniques. The structural analysis confirms the formation of a hexagonal MoS2 crystal structure. The existence of MoO2/MoO3/MoS2 composites is also observed after heating MoS2 with a lower urea concentration. Surface morphological analysis of all the prepared compositions shows the appearance of flower-like nanostructures formed by the stacking of 20–80 nanosheets to create individual flower petals. Nitrogen doping shows enhancement in the specific capacitance of MoS2 due to an increase in the electronic conductivity. Furthermore, the specific capacitance is enhanced due to the formation of an MoO2/MoO3/MoS2 composite. The highest specific capacitance calculated from the charge–discharge curve for nitrogen-doped MoS2 prepared using 1 : 1 (MoS2 : urea) weight ratio is observed at around 129 (F g−1) at 2 (A g−1) specific current. The nitrogen-doped MoS2 demonstrates almost four-fold enhancement in specific capacitance than pristine nano-shaped MoS2.
- 27 November 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (69) , 39749-39755
Open AccessHierarchical nanostructures of nitrogen-doped molybdenum sulphide for supercapacitors
Flower-like nanostructures of molybdenum disulphide (MoS2) have been effectively synthesised by the hydrothermal method and further doped with nitrogen using varying concentrations of urea. The formed hierarchical nanostructures are characterised by spectroscopy as well as electrochemical techniques. The structural analysis confirms the formation of a hexagonal MoS2 crystal structure. The existence of MoO2/MoO3/MoS2 composites is also observed after heating MoS2 with a lower urea concentration. Surface morphological analysis of all the prepared compositions shows the appearance of flower-like nanostructures formed by the stacking of 20–80 nanosheets to create individual flower petals. Nitrogen doping shows enhancement in the specific capacitance of MoS2 due to an increase in the electronic conductivity. Furthermore, the specific capacitance is enhanced due to the formation of an MoO2/MoO3/MoS2 composite. The highest specific capacitance calculated from the charge–discharge curve for nitrogen-doped MoS2 prepared using 1 : 1 (MoS2 : urea) weight ratio is observed at around 129 (F g−1) at 2 (A g−1) specific current. The nitrogen-doped MoS2 demonstrates almost four-fold enhancement in specific capacitance than pristine nano-shaped MoS2.