С. М. Звиглянич
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
С. М. Звиглянич has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Serhii Orlov
State Scientific Research Institute of Armament and Military Equipment Testing and Certification, Cherkasy, Ukraine
6 shared publications - М.п. Ізюмський
Харківський національний університет Повітряних Сил ім. І. Кожедуба, Харків, Україна
5 shared publications - М.ф. Линник
Військовий інститут танкових військ НТУ “ХПІ”, Харків, Україна
4 shared publications - Ю.м. Агафонов
Ivan Kozhedub Kharkiv National Air Force University, Kharkiv, Ukraine
4 shared publications - А. І. Авілов
Харківський національний університет Повітряних Сил ім. І. Кожедуба
3 shared publications S. Zviglyanich
2 shared publications
Latest Publications
- Open Access
- 27 June 2025
- Published by Ivan Kozhedub Kharkiv National Air Force University KNAFU in Збірник наукових праць Харківського національного університету Повітряних Сил
- No. 1(83),p. 27-32
ПІДХОДИ ДО ВИРІШЕННЯ ПИТАННЯ ЦІЛЕРОЗПОДІЛУ ПРИ РЕАЛІЗАЦІЇ КОНЦЕПЦІЇ СТРИМУВАННЯ
У статті розглядаються питання, пов’язані зі стратегією неядерного стримування. Основна увага приділяється проблемі автоматизації процесу цілерозподілу для обрання об’єктів державної інфраструктури як першочергових цілей ураження. Цей процес пов’язаний із визначенням уразливих точок економіки противника, що дозволяє виявити критичні галузі, вузькі місця в ланцюжках поставок та сектори, які сильно залежать від імпорту технологій, ресурсів або матеріалів. Пропонуються методи оптимізації, такі як динамічне програмування та лінійне програмування, для розподілу засобів ураження. Додатково розглядаються сучасні технології, такі як штучний інтелект та машинне навчання, для підвищення ефективності процесу цілерозподілу. Наведено практичні приклади та аналіз ризиків, пов’язаних із автоматизацією.
- 27 June 2025
- Published by Ivan Kozhedub Kharkiv National Air Force University KNAFU in Збірник наукових праць Харківського національного університету Повітряних Сил
- No. 1(83),p. 27-32
Open AccessПІДХОДИ ДО ВИРІШЕННЯ ПИТАННЯ ЦІЛЕРОЗПОДІЛУ ПРИ РЕАЛІЗАЦІЇ КОНЦЕПЦІЇ СТРИМУВАННЯ
У статті розглядаються питання, пов’язані зі стратегією неядерного стримування. Основна увага приділяється проблемі автоматизації процесу цілерозподілу для обрання об’єктів державної інфраструктури як першочергових цілей ураження. Цей процес пов’язаний із визначенням уразливих точок економіки противника, що дозволяє виявити критичні галузі, вузькі місця в ланцюжках поставок та сектори, які сильно залежать від імпорту технологій, ресурсів або матеріалів. Пропонуються методи оптимізації, такі як динамічне програмування та лінійне програмування, для розподілу засобів ураження. Додатково розглядаються сучасні технології, такі як штучний інтелект та машинне навчання, для підвищення ефективності процесу цілерозподілу. Наведено практичні приклади та аналіз ризиків, пов’язаних із автоматизацією.
- Open Access
- 23 March 2025
- Published by Ivan Kozhedub Kharkiv National Air Force University KNAFU in Збірник наукових праць Харківського національного університету Повітряних Сил
- No. 4(82),p. 33-39
ІМІТАЦІЙНА МОДЕЛЬ ПЛАНУВАННЯ УДАРІВ ПО СТАЦІОНАРНИХ ТИПОВИХ УКРИТТЯХ АВІАЦІЙНОЇ ТЕХНІКИ
У статті розглядається автоматизація процесів прийняття рішень у плануванні бойових операцій, акцентуючи на значимості боротьби з авіацією. Зі зростанням ролі бойової авіації стає важливішим знищувати цю техніку на стаціонарних аеродромах, де літаки перебувають у захисних укриттях з арками із залізобетону. Розрахунки свідчать, що для надійного ураження цих споруд фугасним бойовим елементом (ФБЕ) з масою вибухової речовини 2 кг у тротиловому еквіваленті потрібно точне влучання. На відстані 5 метрів від вибуху надлишковий тиск у ударній хвилі не руйнує укриття. Тому для ураження рекомендується діяти за аналогією з осколковими елементами, що застосовуються для ураження бронетехніки шляхом “засівання” касетними боєприпасами. Через складності аналітичних розрахунків, що описують використання ФБЕ проти аеродромних цілей, пропонується імітаційний метод. Це дозволяє використовувати доступні та обчислювані початкові дані з ясним фізичним сенсом. Застосування моделі дозволяє планувати тактику ударних засобів, визначаючи потрібну кількість боєприпасів. Можливе використання алгоритму у програмному забезпеченні для системи підтримки рішень командира або штабу на тактичному рівні.
- 23 March 2025
- Published by Ivan Kozhedub Kharkiv National Air Force University KNAFU in Збірник наукових праць Харківського національного університету Повітряних Сил
- No. 4(82),p. 33-39
Open AccessІМІТАЦІЙНА МОДЕЛЬ ПЛАНУВАННЯ УДАРІВ ПО СТАЦІОНАРНИХ ТИПОВИХ УКРИТТЯХ АВІАЦІЙНОЇ ТЕХНІКИ
У статті розглядається автоматизація процесів прийняття рішень у плануванні бойових операцій, акцентуючи на значимості боротьби з авіацією. Зі зростанням ролі бойової авіації стає важливішим знищувати цю техніку на стаціонарних аеродромах, де літаки перебувають у захисних укриттях з арками із залізобетону. Розрахунки свідчать, що для надійного ураження цих споруд фугасним бойовим елементом (ФБЕ) з масою вибухової речовини 2 кг у тротиловому еквіваленті потрібно точне влучання. На відстані 5 метрів від вибуху надлишковий тиск у ударній хвилі не руйнує укриття. Тому для ураження рекомендується діяти за аналогією з осколковими елементами, що застосовуються для ураження бронетехніки шляхом “засівання” касетними боєприпасами. Через складності аналітичних розрахунків, що описують використання ФБЕ проти аеродромних цілей, пропонується імітаційний метод. Це дозволяє використовувати доступні та обчислювані початкові дані з ясним фізичним сенсом. Застосування моделі дозволяє планувати тактику ударних засобів, визначаючи потрібну кількість боєприпасів. Можливе використання алгоритму у програмному забезпеченні для системи підтримки рішень командира або штабу на тактичному рівні.
- Open Access
- 20 January 2025
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 4(6),p. 7-12
ANALYSIS METHODS LABORATORY VIBRATION TESTING OF FLIGHT APPARATUS UNMANNED AVIATION COMPLEXES
The work examines the most well-known methods of vibration testing of unmanned aircraft systems. The simplest to implement vibration tests are the methods based on the sinusoidal vibration test method. The method of testing for the influence of broadband random vibration, during which several forms of natural oscillations of the structure are excited at the same time, is considered, which makes it possible to conduct vibration tests closer to the conditions of real operation. In addition, modeling of the statistical nature of vibration provides an opportunity to detect all effects of mechanical interaction of various structural elements and ensures the shortest duration of tests. Disadvantages of broadband random vibration tests include the high cost and complexity of the necessary equipment, as well as the high labor intensity of testing. The variable mode of narrow-band random vibration is considered, which is intermediate between the mode of wide-band random vibration and the mode with a variable sinusoidal signal. Systems that reproduce random narrowband vibration are less expensive and allow to simulate broadband vibration. The main disadvantage of the test when excited by a narrow-band spectrum is a slow change in the average frequency of the spectrum, which leads to the excitation of successive resonances of the tested product, while in the case of excitation by a wide-band spectrum, these resonances occur simultaneously. In addition, the duration of tests increases. The conducted comparative analysis made it possible to find out the conditions for the appropriate use of each considered method. The choice of the optimal method of vibration testing depends on the type of unmanned aircraft systems submitted for testing, the amount of information about it, the conditions of testing and further operation, as well as the possibility of implementing the loads defined in the method on the vibration testing equipment.
- 20 January 2025
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 4(6),p. 7-12
Open AccessANALYSIS METHODS LABORATORY VIBRATION TESTING OF FLIGHT APPARATUS UNMANNED AVIATION COMPLEXES
The work examines the most well-known methods of vibration testing of unmanned aircraft systems. The simplest to implement vibration tests are the methods based on the sinusoidal vibration test method. The method of testing for the influence of broadband random vibration, during which several forms of natural oscillations of the structure are excited at the same time, is considered, which makes it possible to conduct vibration tests closer to the conditions of real operation. In addition, modeling of the statistical nature of vibration provides an opportunity to detect all effects of mechanical interaction of various structural elements and ensures the shortest duration of tests. Disadvantages of broadband random vibration tests include the high cost and complexity of the necessary equipment, as well as the high labor intensity of testing. The variable mode of narrow-band random vibration is considered, which is intermediate between the mode of wide-band random vibration and the mode with a variable sinusoidal signal. Systems that reproduce random narrowband vibration are less expensive and allow to simulate broadband vibration. The main disadvantage of the test when excited by a narrow-band spectrum is a slow change in the average frequency of the spectrum, which leads to the excitation of successive resonances of the tested product, while in the case of excitation by a wide-band spectrum, these resonances occur simultaneously. In addition, the duration of tests increases. The conducted comparative analysis made it possible to find out the conditions for the appropriate use of each considered method. The choice of the optimal method of vibration testing depends on the type of unmanned aircraft systems submitted for testing, the amount of information about it, the conditions of testing and further operation, as well as the possibility of implementing the loads defined in the method on the vibration testing equipment.
- Open Access
- 7 November 2024
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 2(4),p. 86-91
JUSTIFICATION OF APPROACHES TO DEVELOPING METHODS FOR ASSESSING FIGHTER DRONE ACTIONS AGAINST UNMANNED AERIAL VEHICLES BASED ON A SIMULATION MODEL
The relevance of issues related to the possibility of using fighter drones against the enemy's unmanned aerial vehicles (UAVs) necessitates the development of methods for evaluating such actions. The presented article proposes a methodology for developing a simulation model for evaluating approaches to the construction of a cover system against the action of enemy UAVs of various purposes: strike, reconnaissance, and others. The given model establishes the relationship between the size of the city cover zone and the location of military formations, the intensity of detection of air targets, the number of fighter drones, their weapons and speed of movement. By changing these parameters, it is possible to establish the necessary dependencies between them. The process of controlling a given zone unfolds in time, which varies discretely with a given step. In order to simulate the operation of the enemy's UAV detection means, a preliminary procedure for determining the fact of their detection is provided by conducting a simulation of a predetermined process in advance. The model assumes that the time intervals of detection of enemy UAVs by means of airspace control are random and have an indicative distribution. In each implementation, during the operation of the model, the calculation of detected air targets is carried out. After an air target is detected, its coordinates are randomly determined. Similarly, coordinates are determined for each fighter drone, and its distance from the air target is calculated. For the fighter drone, which is closest to the target, the fact of the start of aiming is established and the time of approach to the target is calculated. The possibility of hitting an enemy UAV is expressed through the probability of hitting, which refers to the initial data. Also, the initial data includes the probability of target detection by the fighter drone operator when scanning the space where, according to intelligence data, the detected aerial target is located. When a fighter drone approaches a target, the fact of target detection and its destruction is determined by the method of a single draw. The result of the model is an estimate of the mathematical expectation of the number of detected enemy UAVs and an estimate of the mathematical expectation of the number of destroyed enemy UAVs given the initial data. The proposed model can serve as the basis for the development of rational ways of building a system of covering military formations against the action of attack UAVs under the given conditions and can be used in the decision-making support system for combat planning.
- 7 November 2024
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 2(4),p. 86-91
Open AccessJUSTIFICATION OF APPROACHES TO DEVELOPING METHODS FOR ASSESSING FIGHTER DRONE ACTIONS AGAINST UNMANNED AERIAL VEHICLES BASED ON A SIMULATION MODEL
The relevance of issues related to the possibility of using fighter drones against the enemy's unmanned aerial vehicles (UAVs) necessitates the development of methods for evaluating such actions. The presented article proposes a methodology for developing a simulation model for evaluating approaches to the construction of a cover system against the action of enemy UAVs of various purposes: strike, reconnaissance, and others. The given model establishes the relationship between the size of the city cover zone and the location of military formations, the intensity of detection of air targets, the number of fighter drones, their weapons and speed of movement. By changing these parameters, it is possible to establish the necessary dependencies between them. The process of controlling a given zone unfolds in time, which varies discretely with a given step. In order to simulate the operation of the enemy's UAV detection means, a preliminary procedure for determining the fact of their detection is provided by conducting a simulation of a predetermined process in advance. The model assumes that the time intervals of detection of enemy UAVs by means of airspace control are random and have an indicative distribution. In each implementation, during the operation of the model, the calculation of detected air targets is carried out. After an air target is detected, its coordinates are randomly determined. Similarly, coordinates are determined for each fighter drone, and its distance from the air target is calculated. For the fighter drone, which is closest to the target, the fact of the start of aiming is established and the time of approach to the target is calculated. The possibility of hitting an enemy UAV is expressed through the probability of hitting, which refers to the initial data. Also, the initial data includes the probability of target detection by the fighter drone operator when scanning the space where, according to intelligence data, the detected aerial target is located. When a fighter drone approaches a target, the fact of target detection and its destruction is determined by the method of a single draw. The result of the model is an estimate of the mathematical expectation of the number of detected enemy UAVs and an estimate of the mathematical expectation of the number of destroyed enemy UAVs given the initial data. The proposed model can serve as the basis for the development of rational ways of building a system of covering military formations against the action of attack UAVs under the given conditions and can be used in the decision-making support system for combat planning.
- Open Access
- 8 July 2024
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 1(3),p. 78-84
SIMULATION MODEL FOR UNMANNED AERIAL COMPLEXES AT LAUNCHING POSITIONS SURVIVABILITY ASSESSEMENT
The relevance of issues related to the justification of the rational approaches to the combat operations planning using unmanned aircraft systems, which are now assigned the main role in attacking the enemy by fire, necessitates the development of methods for evaluating such actions. The issue of increasing the survivability of unmanned aircraft systems under combat conditions is of important applied importance. The subject of the study is the unmanned aircraft systems application under the conditions of enemy action planning process. The article uses operations research methods. The purpose of the work is to develop a simulation model in the form of an algorithm, that allows conducting process research based on quantitative estimates and substantiating decisions aimed at increasing the survivability of unmanned aircraft systems under conditions of enemy action. By varying the parameters of the simulation model, it becomes possible to develop the most rational solutions for the unmanned aircraft systems use, ensuring the maximum level of their survivability under the specific conditions of combat operations. A simulation model is proposed, with the help of which it is possible to quantitatively evaluate decisions regarding the tactics of using UAV and finding ways to increase the level of their survivability under the conditions of enemy fire. During the implementation of the proposed model, statistics of the results of the simulated fire impact are accumulated, that allows to calculate estimates of the probability of UAV, deployed at the launching positions, to get various degrees of damage. By varying the specified parameters, it becomes possible to develop the most rational solutions aimed at increasing the survivability of UAV under the specific conditions of combat activities performing. The proposed simulation model for the survivability of unmanned aircraft systems assessment may be used in the decision support system for the appropriate level commander.
- 8 July 2024
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 1(3),p. 78-84
Open AccessSIMULATION MODEL FOR UNMANNED AERIAL COMPLEXES AT LAUNCHING POSITIONS SURVIVABILITY ASSESSEMENT
The relevance of issues related to the justification of the rational approaches to the combat operations planning using unmanned aircraft systems, which are now assigned the main role in attacking the enemy by fire, necessitates the development of methods for evaluating such actions. The issue of increasing the survivability of unmanned aircraft systems under combat conditions is of important applied importance. The subject of the study is the unmanned aircraft systems application under the conditions of enemy action planning process. The article uses operations research methods. The purpose of the work is to develop a simulation model in the form of an algorithm, that allows conducting process research based on quantitative estimates and substantiating decisions aimed at increasing the survivability of unmanned aircraft systems under conditions of enemy action. By varying the parameters of the simulation model, it becomes possible to develop the most rational solutions for the unmanned aircraft systems use, ensuring the maximum level of their survivability under the specific conditions of combat operations. A simulation model is proposed, with the help of which it is possible to quantitatively evaluate decisions regarding the tactics of using UAV and finding ways to increase the level of their survivability under the conditions of enemy fire. During the implementation of the proposed model, statistics of the results of the simulated fire impact are accumulated, that allows to calculate estimates of the probability of UAV, deployed at the launching positions, to get various degrees of damage. By varying the specified parameters, it becomes possible to develop the most rational solutions aimed at increasing the survivability of UAV under the specific conditions of combat activities performing. The proposed simulation model for the survivability of unmanned aircraft systems assessment may be used in the decision support system for the appropriate level commander.
- Open Access
- 30 November 2023
- Published by Ivan Kozhedub Kharkiv National Air Force University KNAFU in Збірник наукових праць Харківського національного університету Повітряних Сил
- No. 3 (77),p. 7-11
Шляхи автоматизації процесу планування ударів по об’єктах інфраструктури противника
Infrastructure objects as targets are represented as a system. Each object is characterized by relations and connections with other objects. Relationships between system objects can be reduced to three types of communication: control communication, functional communication, and information communication. Let the resulting intelligence about the enemy grouping be expressed as the probability of the existence and recovery of these links in the event of loss of these links. For each target, we define the probable states Then, using a discrete-time model of the target based on Kolmogorov's equations, we find the probability of finding a particular target in each state. Let's express the uncertainty of finding an object at a given time through its entropy. Entropy will allow us to adjust the importance of each object in the enemy's infrastructure system, taking into account the fact that the higher the entropy of an object, the lower its quality of functioning in the system. Let each object have its importance expressed in terms of cost, taking into account the current entropy, which reflects its state, as well as the required number of munitions to destroy it. Suppose that the total number of ammunitions is also given, distributed for certainty over a number of batteries. You need to distribute the targets across the batteries in such a way that the total “cost” of a strike is maximized. Using the method of dynamic programming, for a given number of munitions, we will determine the list of enemy infrastructure objects, the destruction of which will provide the maximum “price” of the planned strike. And yes, there is a list of targets, their location is known, as well as the required number of munitions to destroy each one. The location of the batteries and the available ammunition on each of them are also specified. You need to distribute the objects as targets for the batteries with maximum efficiency. We will solve this problem using a linear programming transportation problem. The “price” of ammunition delivery here is the distance from the battery to the target. The quality of the solution to this problem can be improved by taking into account the accuracy of the strike. The accuracy of the strike is determined by the range deviation and the lateral deviation, which are set by the firing tables. Let's introduce the product of the distance to the object by the value of the vector as the “price” of ammunition delivery as the sum of the lateral deviation and range deviation vectors. Ultimately, the software implementation of the proposed algorithm for solving the problem of planning a strike on enemy infrastructure objects within the framework of a network-centric way of conducting combat operations will improve the quality of decisions made on the battlefield. У статті розглядаються шляхи раціонального планування удару по угрупованню противника з урахуванням важливості об’єктів та доступних засобів ураження. Використовується модель системи, де об’єкти представлені зв’язками та відношеннями. Розвідувальні дані надають ймовірності наявності та відновлення зв’язків. Використовуючи дискретну модель з рівняннями Колмогорова, визначають ймовірності станів об’єктів. Застосовується ентропія для корекції важливості об’єктів. Задано вартість та необхідну кількість боєприпасів для ураження об’єктів. Цілі розподіляться по батареях для максимальної “ціни” удару. Використовується транспортна задача лінійного програмування з урахуванням точності удару. Зрештою, програмна реалізація запропонованого алгоритму розв’язання задачі планування удару по об’єктах інфраструктури противника в рамках мережецентричного способу ведення бойових дій дозволить підвищити якість прийнятих рішень на полі бою.
- 30 November 2023
- Published by Ivan Kozhedub Kharkiv National Air Force University KNAFU in Збірник наукових праць Харківського національного університету Повітряних Сил
- No. 3 (77),p. 7-11
Open AccessШляхи автоматизації процесу планування ударів по об’єктах інфраструктури противника
Infrastructure objects as targets are represented as a system. Each object is characterized by relations and connections with other objects. Relationships between system objects can be reduced to three types of communication: control communication, functional communication, and information communication. Let the resulting intelligence about the enemy grouping be expressed as the probability of the existence and recovery of these links in the event of loss of these links. For each target, we define the probable states Then, using a discrete-time model of the target based on Kolmogorov's equations, we find the probability of finding a particular target in each state. Let's express the uncertainty of finding an object at a given time through its entropy. Entropy will allow us to adjust the importance of each object in the enemy's infrastructure system, taking into account the fact that the higher the entropy of an object, the lower its quality of functioning in the system. Let each object have its importance expressed in terms of cost, taking into account the current entropy, which reflects its state, as well as the required number of munitions to destroy it. Suppose that the total number of ammunitions is also given, distributed for certainty over a number of batteries. You need to distribute the targets across the batteries in such a way that the total “cost” of a strike is maximized. Using the method of dynamic programming, for a given number of munitions, we will determine the list of enemy infrastructure objects, the destruction of which will provide the maximum “price” of the planned strike. And yes, there is a list of targets, their location is known, as well as the required number of munitions to destroy each one. The location of the batteries and the available ammunition on each of them are also specified. You need to distribute the objects as targets for the batteries with maximum efficiency. We will solve this problem using a linear programming transportation problem. The “price” of ammunition delivery here is the distance from the battery to the target. The quality of the solution to this problem can be improved by taking into account the accuracy of the strike. The accuracy of the strike is determined by the range deviation and the lateral deviation, which are set by the firing tables. Let's introduce the product of the distance to the object by the value of the vector as the “price” of ammunition delivery as the sum of the lateral deviation and range deviation vectors. Ultimately, the software implementation of the proposed algorithm for solving the problem of planning a strike on enemy infrastructure objects within the framework of a network-centric way of conducting combat operations will improve the quality of decisions made on the battlefield. У статті розглядаються шляхи раціонального планування удару по угрупованню противника з урахуванням важливості об’єктів та доступних засобів ураження. Використовується модель системи, де об’єкти представлені зв’язками та відношеннями. Розвідувальні дані надають ймовірності наявності та відновлення зв’язків. Використовуючи дискретну модель з рівняннями Колмогорова, визначають ймовірності станів об’єктів. Застосовується ентропія для корекції важливості об’єктів. Задано вартість та необхідну кількість боєприпасів для ураження об’єктів. Цілі розподіляться по батареях для максимальної “ціни” удару. Використовується транспортна задача лінійного програмування з урахуванням точності удару. Зрештою, програмна реалізація запропонованого алгоритму розв’язання задачі планування удару по об’єктах інфраструктури противника в рамках мережецентричного способу ведення бойових дій дозволить підвищити якість прийнятих рішень на полі бою.
- Open Access
- 23 December 2022
- Published by Ivan Kozhedub Kharkiv National Air Force University KNAFU in Системи озброєння і військова техніка
- No. 3 (71),p. 20-23
Підхід до оцінки ефективності розвідувального безпілотного авіаційного комплексу з використанням показників, що характеризують готовність та якість його застосування
The article proposes an approach to evaluating the effectiveness of the reconnaissance unmanned aircraft complex using indicators characterizing the readiness and quality of its use. In the work, the effectiveness of the reconnaissance unmanned aircraft complex is evaluated based on the assessment of the main numerical indicators, which are used to assess the quality of the system's functioning. Certain criteria or their complex values characterizing the performance of the system are involved in determining the required values of individual parameters. When evaluating the effectiveness of the use of a reconnaissance unmanned aircraft complex, the basis for choosing an evaluation criterion is the principle of an acceptable result. The parameters of the reconnaissance unmanned aircraft complex include reliability, readiness, efficiency, and the quality of the conducted reconnaissance. Quantitative indicators of the reliability of the reconnaissance unmanned aircraft complex are: the probability of trouble-free operation of the system during the given operating conditions; working time for failure; average recovery time. As indicators characterizing the readiness of a reconnaissance unmanned aircraft complex, the following should be considered: the probability that the complex will be brought into readiness to perform its functions in a time that does not exceed the permissible time; a generalized indicator of technical readiness to perform combat missions. Operational readiness is assessed by management cycle time. The use of these parameters makes it possible to adjust the elements of systems and subsystems in order to perform the assigned tasks with greater efficiency. The use of parameters characterizing the quality of task performance, namely the indicator of the completeness of object detection and the indicator of the value of the received intelligence information makes it possible to comprehensively assess the functioning of the intelligence unmanned aviation complex with the given input parameters. It should be noted that the conditions of combat use impose restrictions on the entered indicators. Restrictions are formed on the basis of expert assessments, taking into account the real combat situation and the tactical and technical characteristics of the reconnaissance unmanned aircraft complex. У статті запропонований підхід до оцінки ефективності розвідувального безпілотного авіаційного комплексу з використанням показників, що характеризують готовність та якість його застосування. Запропоновані показники дозволяють оцінити ступень ефективності розвідувального безпілотного авіаційного комплексу щодо виконання поставлених завдань. Кількісна оцінка параметрів розвідувального безпілотного авіаційного комплексу дає можливість скорегувати елементи систем та підсистем з метою виконання завдань за призначенням з більшою ефективністю. Запропоновані показники якості застосування розвідувального безпілотного авіаційного комплексу дають можливість комплексно оцінити функціонування розвідувального безпілотного авіаційного комплексу із заданими вхідними параметрами.
- 23 December 2022
- Published by Ivan Kozhedub Kharkiv National Air Force University KNAFU in Системи озброєння і військова техніка
- No. 3 (71),p. 20-23
Open AccessПідхід до оцінки ефективності розвідувального безпілотного авіаційного комплексу з використанням показників, що характеризують готовність та якість його застосування
The article proposes an approach to evaluating the effectiveness of the reconnaissance unmanned aircraft complex using indicators characterizing the readiness and quality of its use. In the work, the effectiveness of the reconnaissance unmanned aircraft complex is evaluated based on the assessment of the main numerical indicators, which are used to assess the quality of the system's functioning. Certain criteria or their complex values characterizing the performance of the system are involved in determining the required values of individual parameters. When evaluating the effectiveness of the use of a reconnaissance unmanned aircraft complex, the basis for choosing an evaluation criterion is the principle of an acceptable result. The parameters of the reconnaissance unmanned aircraft complex include reliability, readiness, efficiency, and the quality of the conducted reconnaissance. Quantitative indicators of the reliability of the reconnaissance unmanned aircraft complex are: the probability of trouble-free operation of the system during the given operating conditions; working time for failure; average recovery time. As indicators characterizing the readiness of a reconnaissance unmanned aircraft complex, the following should be considered: the probability that the complex will be brought into readiness to perform its functions in a time that does not exceed the permissible time; a generalized indicator of technical readiness to perform combat missions. Operational readiness is assessed by management cycle time. The use of these parameters makes it possible to adjust the elements of systems and subsystems in order to perform the assigned tasks with greater efficiency. The use of parameters characterizing the quality of task performance, namely the indicator of the completeness of object detection and the indicator of the value of the received intelligence information makes it possible to comprehensively assess the functioning of the intelligence unmanned aviation complex with the given input parameters. It should be noted that the conditions of combat use impose restrictions on the entered indicators. Restrictions are formed on the basis of expert assessments, taking into account the real combat situation and the tactical and technical characteristics of the reconnaissance unmanned aircraft complex. У статті запропонований підхід до оцінки ефективності розвідувального безпілотного авіаційного комплексу з використанням показників, що характеризують готовність та якість його застосування. Запропоновані показники дозволяють оцінити ступень ефективності розвідувального безпілотного авіаційного комплексу щодо виконання поставлених завдань. Кількісна оцінка параметрів розвідувального безпілотного авіаційного комплексу дає можливість скорегувати елементи систем та підсистем з метою виконання завдань за призначенням з більшою ефективністю. Запропоновані показники якості застосування розвідувального безпілотного авіаційного комплексу дають можливість комплексно оцінити функціонування розвідувального безпілотного авіаційного комплексу із заданими вхідними параметрами.
- 26 March 2022
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 11,p. 47-54
SUGGESTION ON THE CHOICE OF COMBINATIONS OF ENEMY’S GROUND OBJECTS BEING STRUCK AT PLANNING OF FIRE STRIKES TAKING INTO ACCOUNT CURRENT STATUS OF THESE OBJECTS
The article discusses suggestion to solving the problem of choosing a target combination when planning fire strikes against enemy targets. As a rule, such objects are important elements of C2 system for all services and branches of troops, as well as key infrastructure facilities of the state. It is reasonable to consider the objects selected for destruction as a system in which their functioning can be characterized by the level and completeness of interaction with each other. Representation of targets as a system allows you to highlight the existing connections and the nature of the relationship between these objects. In general, all connections can be reduced to control, functional and informational. It is proposed, depending on the purpose of each object in the system as a whole, on the basis of an expert assessment, to take into account the value of a particular relationship by the coefficient of importance. Note that the type of connection also determines the relationship of objects to each other. The state of links can change over time, thereby changing the position (significance) of an object in the system. Let us assume that some means of control establish the probability of the presence of connections of all objects in the system. Such connections (their presence or absence) determine the possible state of the objects under consideration. Then, making the assumption that the process of transition of objects from state to state is stationary, on the basis of the Kolmogorov equations, the probabilities of finding objects in the states under consideration are calculated. The absence (restoration) of any given connection is a random event and introduces some uncertainty in the knowledge of the true state of the object under consideration. Let us estimate this uncertainty in terms of the object's entropy. The maximum value of entropy is achieved when the probability of finding an object in a working (initial) state is equal to 0.5. Any other value of entropy corresponds to two probabilities characterizing, respectively, two states of the object. In order to distinguish them, we introduce a characteristic variable. The value of the introduced variable increases with an increase in the probability of finding an object in good condition and, accordingly, decreases with a decrease in this probability. The potential of an object to perform its functions in the system is also significantly influenced by the number of connections connecting it with other objects in the system. It is proposed to introduce the indicator "potential of the object". This indicator combines both the uncertainty of the state of an object through the introduced characteristic variable and the number of connections with other objects in the system. In other words, it determines the ability of the object to fulfill its purpose at this stage of the system's functioning. The ranking of objects in the system according to this indicator makes it possible to single out the affected combination, which leads to a maximum decrease in the quality of the functioning of the system as a whole. Determining the combination to be hit can also be based on a ranged number of objects by the time to restore their readiness, while setting the requirement to maximize the required time to restore the readiness of the functioning of the system as a whole. If the number of objects included in the system is significant, and the number of combat units allocated for their destruction is limited, then the solution to the problem of choosing the combination to be hit becomes not trivial. In this case, it is proposed to reduce the problem of determining the target combination to the problem of resource allocation, which is solved by the method of dynamic programming. The number of stages considered is reduced to the number of objects. Combat units act as a resource. The damage function is expressed through the entered indicator - “object potential”. In this case, we are talking about the choice of the affected combination, which leads to the maximum damage to the system of objects in terms of its functioning as a whole. If we imagine the function of damage after the recovery time after the strike, then the selected combination to be hit corresponds to the target of the fire strike, leading to the incapacitation of the system for the maximum time. The presented approaches to the determination of the target combination can be used in the development of automation tools for the decision support system when planning fire strikes against enemy target.
- 26 March 2022
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 11,p. 47-54
SUGGESTION ON THE CHOICE OF COMBINATIONS OF ENEMY’S GROUND OBJECTS BEING STRUCK AT PLANNING OF FIRE STRIKES TAKING INTO ACCOUNT CURRENT STATUS OF THESE OBJECTS
The article discusses suggestion to solving the problem of choosing a target combination when planning fire strikes against enemy targets. As a rule, such objects are important elements of C2 system for all services and branches of troops, as well as key infrastructure facilities of the state. It is reasonable to consider the objects selected for destruction as a system in which their functioning can be characterized by the level and completeness of interaction with each other. Representation of targets as a system allows you to highlight the existing connections and the nature of the relationship between these objects. In general, all connections can be reduced to control, functional and informational. It is proposed, depending on the purpose of each object in the system as a whole, on the basis of an expert assessment, to take into account the value of a particular relationship by the coefficient of importance. Note that the type of connection also determines the relationship of objects to each other. The state of links can change over time, thereby changing the position (significance) of an object in the system. Let us assume that some means of control establish the probability of the presence of connections of all objects in the system. Such connections (their presence or absence) determine the possible state of the objects under consideration. Then, making the assumption that the process of transition of objects from state to state is stationary, on the basis of the Kolmogorov equations, the probabilities of finding objects in the states under consideration are calculated. The absence (restoration) of any given connection is a random event and introduces some uncertainty in the knowledge of the true state of the object under consideration. Let us estimate this uncertainty in terms of the object's entropy. The maximum value of entropy is achieved when the probability of finding an object in a working (initial) state is equal to 0.5. Any other value of entropy corresponds to two probabilities characterizing, respectively, two states of the object. In order to distinguish them, we introduce a characteristic variable. The value of the introduced variable increases with an increase in the probability of finding an object in good condition and, accordingly, decreases with a decrease in this probability. The potential of an object to perform its functions in the system is also significantly influenced by the number of connections connecting it with other objects in the system. It is proposed to introduce the indicator "potential of the object". This indicator combines both the uncertainty of the state of an object through the introduced characteristic variable and the number of connections with other objects in the system. In other words, it determines the ability of the object to fulfill its purpose at this stage of the system's functioning. The ranking of objects in the system according to this indicator makes it possible to single out the affected combination, which leads to a maximum decrease in the quality of the functioning of the system as a whole. Determining the combination to be hit can also be based on a ranged number of objects by the time to restore their readiness, while setting the requirement to maximize the required time to restore the readiness of the functioning of the system as a whole. If the number of objects included in the system is significant, and the number of combat units allocated for their destruction is limited, then the solution to the problem of choosing the combination to be hit becomes not trivial. In this case, it is proposed to reduce the problem of determining the target combination to the problem of resource allocation, which is solved by the method of dynamic programming. The number of stages considered is reduced to the number of objects. Combat units act as a resource. The damage function is expressed through the entered indicator - “object potential”. In this case, we are talking about the choice of the affected combination, which leads to the maximum damage to the system of objects in terms of its functioning as a whole. If we imagine the function of damage after the recovery time after the strike, then the selected combination to be hit corresponds to the target of the fire strike, leading to the incapacitation of the system for the maximum time. The presented approaches to the determination of the target combination can be used in the development of automation tools for the decision support system when planning fire strikes against enemy target.
- 24 December 2021
- Published by Ivan Kozhedub Kharkiv National Air Force University KNAFU in Системи озброєння і військова техніка
- No. 4 (68),p. 21-25
Оцінка можливостей комплексу озброєння в ході планування ураження виявлених об’єктів
В статті розглядається підхід до оцінювання бойових можливостей комплексів озброєння різних типів під час планування ураження виявлених цілей. Сучасні комплекси озброєння представляються у якості складних антропотехнічних систем, які функціонують в режимі жорсткого часового обмеження. Це, в свою чергу, зумовлює підвищення вимог як до технічної готовності комплексу озброєння по виконанню функціональних задач, так і підвищення вимог до номерів бойових розрахунків, які безпосередньо управляють цією зброєю і використовують засоби за призначенням. Запропоновано загальний підхід до оцінки можливостей комплексів озброєння різного призначення. Даний підхід опирається на цілком об'єктивні показники. Проста кількісна оцінка дає можливість на основі введених критеріїв проводити оцінювання існуючих однотипних комплексів озброєння. Цей підхід може лягти в основу методик для оцінювання готовності конкретних типів комплексів озброєння. За результатами такого оцінювання з'являється можливість прогнозування рівня готовності комплексів озброєння до бойового застосування.
- 24 December 2021
- Published by Ivan Kozhedub Kharkiv National Air Force University KNAFU in Системи озброєння і військова техніка
- No. 4 (68),p. 21-25
Оцінка можливостей комплексу озброєння в ході планування ураження виявлених об’єктів
В статті розглядається підхід до оцінювання бойових можливостей комплексів озброєння різних типів під час планування ураження виявлених цілей. Сучасні комплекси озброєння представляються у якості складних антропотехнічних систем, які функціонують в режимі жорсткого часового обмеження. Це, в свою чергу, зумовлює підвищення вимог як до технічної готовності комплексу озброєння по виконанню функціональних задач, так і підвищення вимог до номерів бойових розрахунків, які безпосередньо управляють цією зброєю і використовують засоби за призначенням. Запропоновано загальний підхід до оцінки можливостей комплексів озброєння різного призначення. Даний підхід опирається на цілком об'єктивні показники. Проста кількісна оцінка дає можливість на основі введених критеріїв проводити оцінювання існуючих однотипних комплексів озброєння. Цей підхід може лягти в основу методик для оцінювання готовності конкретних типів комплексів озброєння. За результатами такого оцінювання з'являється можливість прогнозування рівня готовності комплексів озброєння до бойового застосування.
- 17 March 2021
- Published by Ivan Kozhedub Kharkiv National Air Force University KNAFU in Системи озброєння і військова техніка
- No. 1(65),,p. 7-11
Імітаційна модель оцінювання ефективності систем залпового вогню
На сьогодні системи залпового вогню представляють бойові платформи, що широко використовуються в Сухопутних військах при веденні усіх форм і видів бойових дій. Вдосконалення систем залпового вогню, підвищення їх бойової ефективності є важливим науково-технічним завданням. Предметом розгляду статті є спосіб оцінювання ефективності застосування систем залпового вогню. Запропонований підхід оцінювання ефективності систем залпового вогню на основі імітаційної моделі, що значною мірою спростило розробку математичної моделі даного процесу. Основним чинником, що впливає на процес ураження площадкових цілей, який розглядається в моделі, є точність прицілювання. Результатом роботи моделі є визначення, залежно від точності, долі зони ураження, що потрапила під дію вражаючих елементів бойових блоків. Початкові дані, що використовуються в моделі, мають ясний фізичний сенс, відображають процес ураження площадкової цілі системою залпового вогню і є обчислюваними. Запропонована імітаційна модель дозволяє проводити кількісну оцінку варіантів ураження заданої площі при плануванні бойових операцій.
- 17 March 2021
- Published by Ivan Kozhedub Kharkiv National Air Force University KNAFU in Системи озброєння і військова техніка
- No. 1(65),,p. 7-11
Імітаційна модель оцінювання ефективності систем залпового вогню
На сьогодні системи залпового вогню представляють бойові платформи, що широко використовуються в Сухопутних військах при веденні усіх форм і видів бойових дій. Вдосконалення систем залпового вогню, підвищення їх бойової ефективності є важливим науково-технічним завданням. Предметом розгляду статті є спосіб оцінювання ефективності застосування систем залпового вогню. Запропонований підхід оцінювання ефективності систем залпового вогню на основі імітаційної моделі, що значною мірою спростило розробку математичної моделі даного процесу. Основним чинником, що впливає на процес ураження площадкових цілей, який розглядається в моделі, є точність прицілювання. Результатом роботи моделі є визначення, залежно від точності, долі зони ураження, що потрапила під дію вражаючих елементів бойових блоків. Початкові дані, що використовуються в моделі, мають ясний фізичний сенс, відображають процес ураження площадкової цілі системою залпового вогню і є обчислюваними. Запропонована імітаційна модель дозволяє проводити кількісну оцінку варіантів ураження заданої площі при плануванні бойових операцій.