RGRajiv Giridharagopal

Rajiv Giridharagopal

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rajiv Giridharagopal has a total of 210 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Direct Microscale Observation of Additive-Triggered Reduction in Tin Halide Perovskites

    by Robert J. E. Westbrook, Margherita Taddei, Jesús Sanchez-Diaz, Tehmina Mushtaq, Rafael S Sánchez, Luis Lanzetta, Rajiv Giridharagopal, David S. Ginger, Iván Mora-Seró

    We investigate the nanoscale function of additives used for tin-containing perovskites, using the archetypal FASnI3 (FA = formamidinium). First, we find that the addition of sodium borohydride (NaBH4) is inhomogeneous, with 200–500 nm aggregates forming on the FASnI3 surface. The inhomogeneous distribution of NaBH4 leads to a relatively small (∼1% of the film) amount of reduced perovskite, but the macroscopic properties are dominated by the overwhelming space without any treatment. Upon illumination, more aggregate regions (∼13%) become activated due to reduction of photogenerated I2. On the other hand, when we combine NaBH4 with dipropylammonium iodide (DipI) passivation and illuminate, we observe a much more homogeneous activation effect, which we attribute to denser coverage of NaBH4. We find that the iodine content in FASnI3 films treated with NaBH4 and DipI is 64% less than in those treated with NaBH4 alone. These results underline that the microscale configuration of different additives in tin perovskites is deeply interconnected and it is essential to uncover their chemical reactivity.

  • Open Access

    Atomic-Scale Observation of Symmetry Breaking in Altermagnetic MnTe

    by Guodong Ren, Jonathan DeStefano, Xiao-Wei Zhang, Arashdeep Thind, Rajiv Giridharagopal, José Ángel Castellanos-Reyes, Paul Zeiger, Noah Kamm, Sijie Xu, Zhaoyu Liu, et al.

    The recent discovery of altermagnetism has sparked growing interest in compensated magnetic systems as promising platforms for highly scalable spintronics. Altermagnetism is a distinct magnetic order where opposite spin sublattices are connected by rotation, yielding zero net magnetization but momentum‑dependent spin splitting. To date, experimental verification of altermagnetic order has been achieved predominantly through bulk-sensitive techniques, including spin-dependent electronic spectra and transport responses. However, direct atomic-scale evidence that explicitly correlates crystal symmetry, local structural distortions, and magnetic ordering has remained unexplored. Here, we report the direct atomic scale observation of coexisting polar distortions and altermagnetic order in MnTe, combining atomic resolution scanning transmission electron microscopy (STEM) imaging with electron magnetic chiral dichroism (EMCD) measurements. We reveal that MnTe is not an ideal uniform P63/mmc g-wave altermagnet at the atomic scale. Instead, it hosts ubiquitous inversion-symmetry-breaking distortions that lower the spin-space-group (SSG) symmetry, admits d-wave altermagnetic components, and in lower-symmetry regimes, even allow s‑wave spin splitting (net magnetization). The coexistence of ferroelectric signatures and altermagnetic order establishes local lattice symmetry in MnTe as a control knob for altermagnetic spin splitting, spin current generation, and multiferroic memory applications.


  • Degradation Dynamics of Perovskite Solar Cells Under Fixed Reverse-Current Injection

    by Fangyuan Jiang, Haruka Koizumi, Hannah Contreras, Rajiv Giridharagopal, Akash Dasgupta, Zixu Huang, Ryan A. DeCrescent, Kell Fremouw, Michael D. McGehee, Neal R. Armstrong, et al.

    Previous studies of reverse-bias stability in perovskite solar cells have focused primarily on voltage-controlled tests. Here, we instead investigate perovskite solar cell degradation under well-defined, constant reverse-current stress. We show that the choice of hole-transport layer dictates the dominant degradation pathway: cells using thick poly(triphenylamine) (PTAA) layers can tolerate high reverse bias but quickly undergo catastrophic breakdown under fixed reverse current near their one-sun maximum power point. In contrast, cells modified with phosphonic-acid interface layer MeO-2PACz, with poorer indium-doped tin oxide (ITO) coverage compared to PTAA, exhibit gradual and recoverable degradation under certain stress and recovery conditions. For MeO-2PACz devices, degradation increases with both current magnitude and duration. Importantly, when normalized by injected charge (current times duration), lower currents applied over longer times cause more degradation than higher currents over shorter periods. Combining electrical measurements with spatially resolved photoluminescence imaging, our observations support an ion- and charge-mediated interfacial electrochemical degradation mode.

  • Open Access

    pH Regulates Ion Dynamics in Carboxylated Mixed Conductors

    by Zeyuan Sun, Mengting Sun, Rajiv Giridharagopal, Robert C. Hamburger, Siyu Qin, Haoxuan Li, Mitchell Hausback, Yulong Zheng, Bohyeon Kim, Heng Tan, et al.

    Coupled ionic and electronic transport underpins processes as diverse as electrochemical energy conversion, biological signaling, and soft adaptive electronics. Yet, how chemical environments such as pH modulate this coupling at the molecular scale remains poorly understood. Here, we show that the protonation state of carboxylated polythiophenes provides precise chemical control over ion dynamics, doping efficiency, solvent uptake, and mechanical response. Using a suite of multimodal operando techniques, supported by simulations, we reveal that pH dictates the balance of cation/anion uptake during electrochemical doping. Mapping across pH uncovers a quasi-nonswelling regime (≈pH 3–3.5) where charge compensation proceeds with minimal volumetric change yet pronounced stiffening. These findings establish molecular acidity as a general strategy to program ionic preference and mechanical stability, offering design principles for pH-responsive mixed conductors and soft electronic materials that couple ionic, electronic, and mechanical functionality.


  • Deposition-Dependent Coverage and Performance of Phosphonic Acid Interface Modifiers in Halide Perovskite Optoelectronics

    by Hannah Contreras, Aidan O’bRien, Margherita Taddei, Yangwei Shi, Fangyuan Jiang, Robert J. E. Westbrook, Yadong Zhang, Julisa Juarez, Rajiv Giridharagopal, Paul A. Lee, et al.

    In this work, we study the effect of various deposition methods for phosphonic acid interface modifiers commonly pursued as self-assembled monolayers in high-performance metal halide perovskite photovoltaics and light-emitting diodes. We compare the deposition of (2-(3,6-diiodo-9H-carbazol-9-yl)ethyl)phosphonic acid onto indium tin oxide (ITO) bottom contacts by varying three parameters: the method of deposition, specifically spin coating or prolonged dip coating; ITO surface treatment via HCl/FeCl3 etching; and use in combination with a second modifier, 1,6-hexylenediphosphonic acid. We demonstrate that varying these modification protocols can impact time-resolved photoluminescence carrier lifetimes and quasi-Fermi level splitting of perovskite films deposited onto the phosphonic acid-modified ITO. Ultraviolet photoelectron spectroscopy shows an increase in the effective work function after phosphonic acid modification and clear evidence for photoemission from carbazole functional groups at the ITO surface. We used X-ray photoelectron spectroscopy to probe differences in phosphonic acid coverage on the metal oxide contact and show that perovskite samples grown on ITO with the highest phosphonic acid coverage exhibit the longest carrier lifetimes. Finally, we establish that device performance follows these same trends. These results indicate that the reactivity, heterogeneity, and composition of the bottom contact help to control recombination rates and therefore power conversion efficiencies. ITO etching, prolonged deposition times for phosphonic acids via dip coating, and the use of a secondary, more hydrophilic bisphosphonic acid all contribute to improvements in surface coverage, carrier lifetime, and device efficiency. These improvements each have a positive impact, and we achieve the best results when all three strategies are implemented.


  • Quantifying the Localization of Charges Generated upon Molecular Doping of Conjugated Polymers

    by Sung-Joo Kwon, Rajiv Giridharagopal, Yusuf Olanrewaju, Justin Neu, Wei You, Franky So, David S. Ginger

    Quantifying whether the charges created by molecular doping of organic semiconductors reside in localized versus mobile states is important to understanding doping mechanisms of organic semiconductors. Nevertheless, such quantification remains challenging, as it typically requires Hall effect measurements or specialized equipment. Here, we quantify the mobile and localized charge concentrations in molecularly doped conjugated polymers using spectroelectrochemical calibration, which we cross-validate by applying X-ray photoemission spectroscopy and Hall effect measurements and by fitting to established transport models. As a test case, we study doping with 2,3,5,6-tetrafluoro7,7,8,8-tetracyanoquinodimethane (F4TCNQ) in two different polymers: poly[2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene] (PBTTT) and (poly(bithiophene-thienothiophene) derivative modified with a triethylene glycol side chain (Pg2T-TT). In PBTTT, we find that at most ∼10% of the carriers become mobile once carrier concentrations reach ∼3 × 1020 cm-3 (∼0.4 molar ratio of F4TCNQ:thiophene). In contrast, when using Pg2T-TT, we find that the mobile fraction exceeds 50% at carrier concentrations of ∼3 × 1020 cm-3 (∼0.1 of the F4TCNQ molar ratio). Not only are these results consistent with Hall effect measurements, but they agree with an analysis of the semilocalized transport (SLoT) model. We fit the SLoT model and extract the depth of potential well in combination with Fermi-level measurements via scanning Kelvin probe microscopy. These fits further indicate that Pg2T-TT reaches delocalized transport conditions while transport in PBTTT remains localized. This work provides a straightforward platform for quantifying charge localization in molecularly doped conjugated polymers by providing explicit parameters governing the charge transport, including carrier concentration, mobility, and the fraction of mobile carriers.


  • Subdiffraction Imaging of Carrier Dynamics in Halide Perovskite Semiconductors: Effects of Passivation, Morphology, and Ion Motion

    by Madeleine D. Breshears, Justin Pothoof, Rajiv Giridharagopal, David S. Ginger

    We spatially resolve photocarrier dynamics in halide perovskites using time-resolved electrostatic force microscopy (trEFM) to map surface potential equilibration during photoexcitation. We present a unified interpretation of trEFM, which measures the evolution of the surface potential in response to photoexcitation. We show that trEFM measurements correlate with surface recombination velocity and carrier lifetimes, validated with time-resolved photoluminescence imaging. We further validate the interpretation of trEFM through wavelength- and intensity-dependent measurements and with drift-diffusion simulations. We compare several passivation agents, including (3-aminopropyl)trimethoxysilane (APTMS), [3-(2-aminoethylamino)propyl]trimethoxysilane (AEAPTMS), and phenethylammonium iodide (PEAI). The results reveal heterogeneity in surface potential equilibration times that correlates with perovskite film morphology and nanoscale variations in recombination dynamics following surface passivation. Not only do our results highlight the potential for further improvement of passivation strategies, but also the necessity of high spatial and temporal resolution methods, like trEFM, to evaluate next-generation semiconductors.


  • Open Access

    Air-stable n-type dopant for organic semiconductors via a single-photon catalytic process

    by Liang Yan, Xinzheng Yang, Mengqi Yang, Justin Neu, Somayeh Kashani, Rajiv Giridharagopal, Yusuf Olanrewaju, Franky So, David Ginger, Harald Ade, et al.

    Controlled doping of conjugated polymer-based semiconductors is crucial for optoelectronic applications. While p-type doping of conjugated polymers can be readily achieved with a variety of oxidants, n-type doping is more challenging, usually requiring highly reactive reducing agents. Here, we demonstrate that an air-stable photoredox catalyst (acridinium salt), together with a mild and air-stable reducing agent (amine), can effectively dope common n-type conjugated polymers under light at room temperature, yielding conductivity values on par with the highest obtained via other means. We elucidate the mechanism and show that this photoredox n-doping occurs via a one-photon–one-electron transfer process that is catalytic in nature. This simple and facile n-doping approach opens more avenues for doping organic semiconductors with the potential to revolutionize device design and substantially enhance doping efficiency.


  • Multioutput Convolutional Neural Network for Improved Parameter Extraction in Time-Resolved Electrostatic Force Microscopy Data

    by Madeleine D. Breshears, Rajiv Giridharagopal, David S. Ginger

    Time-resolved scanning probe microscopy methods, like time-resolved electrostatic force microscopy (trEFM), enable imaging of dynamic processes ranging from ion motion in batteries to electronic dynamics in microstructured thin film semiconductors for solar cells. Reconstructing the underlying physical dynamics from these techniques can be challenging due to the interplay of cantilever physics with the actual transient kinetics of interest in the resulting signal. Previously, quantitative trEFM used empirical calibration of the cantilever or feed-forward neural networks trained on simulated data to extract the physical dynamics of interest. Both these approaches are limited by interpreting the underlying signal as a single exponential function, which serves as an approximation but does not adequately reflect many realistic systems. Here, we present a multibranched, multioutput convolutional neural network (CNN) that uses the trEFM signal in addition to the physical cantilever parameters as input. The trained CNN accurately extracts parameters describing both single-exponential and biexponential underlying functions and more accurately reconstructs real experimental data in the presence of noise. This work demonstrates an application of physics-informed machine learning to complex signal processing tasks, enabling more efficient and accurate analysis of trEFM.


  • Open Access

    Organic Electrochemical Transistors Based on Blend Films with Thermoresponsive Polymer

    by Shunsuke Yamamoto, Shuhei Kindaichi, Ryosuke Matsubara, Atsushi Kubono, Rajiv Giridharagopal, David S. Ginger, Masaya Mitsuishi

    Organic electrochemical transistors (OECTs) are biocompatible devices with significant potential for biosensing. Functionalizing the channel layers is essential for improving the selectivity and sensitivity of OECT‐based biosensors. A straightforward one‐step fabrication method for these functionalized channel layers can simplify the production process for these devices. This study developed OECT devices based on a polymer blend of poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate) (PEDOT:PSS) and poly( N ‐isopropylacrylamide) (PNIPAM) that respond to temperature changes. Structural analyses of the blended films showed that hole transport through PEDOT is maintained even after blending, and the PNIPAM is segregated at the surface. To overcome the large chain conformational change that occurs with temperature changes, a flexible poly(ethylene glycol) diglycidyl ether (PEGDE) crosslinker is used in addition to the conventional crosslinker, (3‐glycidyloxypropyl)trimethoxysilane (GOPS). As a result, the PEGDE + GOPS binary crosslinker system exhibited reversible responses to temperature cycling. These results highlight two key considerations when designing a functional mixed‐conductor film based on a polymer blend system: (1) vertical phase separation and (2) proper crosslinker selection.