Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lin Wang has a total of 255 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Van der Waals Ferroelectrics Toward Non‐Volatile Nanoelectronics

    by Lin Wang, Yinfeng Long, Han Chen, Mingyue Yuan, Runlai Li, LinFeng Sun, Kian Ping Loh

    Ferroelectric materials exhibit controllable spontaneous electrical polarization under external electric fields, offering significant potential for high‐density, high‐speed, and energy‐efficient non‐volatile electronic device technology. However, the practical realization of conventional ferroelectrics has been impeded by issues such as lattice mismatch, interfacial challenges, limited compatibility with silicon complementary metal–oxide‐semiconductor (CMOS) technology, and compromised device reliability. In contrast, van der Waals (vdW) ferroelectrics are characterized by room‐temperature ferroelectricity, atomic‐scale thickness, dangling‐bond‐free surfaces, and weak interlayer interactions suitable for constructing tailored structures. These unique properties position them as an unprecedented platform to address the fundamental limitations of their conventional counterparts for developing non‐volatile ferroelectric devices. Herein, we critically evaluate the current status of vdW ferroelectric research with a focus on their application in non‐volatile device technology. We survey recent breakthroughs in material discovery and polarization control, analyze the device performance of both intrinsic and artificial vdW ferroelectrics through quantitative benchmarking against conventional technologies, and identify the key materials‐level and device‐level challenges—including polarization magnitude, switching kinetics, characterization reliability, defect dynamics, and scalable integration—that must be addressed to advance this field toward practical memory applications.

  • Defect-Engineered Electrical Transport in SnS via Electron Beam Irradiation

    by Yinfeng Long, Saiyu Bu, Han Chen, Kai Liu, Shiyu Zhang, Zhenhua Wu, Tianru Wu, Lin Wang

    As a prototypical van der Waals layered monochalcogenide semiconductor, tin monosulfide (SnS) holds considerable promise for a wide range of applications owing to its distinctive physical properties. Conventional defect engineering strategies are predominantly confined to the material growth stage, which hinders localized, iterative post-fabrication modulation of electrical performance. Herein, we employ electron beam irradiation as a defect engineering strategy to systematically investigate the evolution of defect structures and electrical properties in multilayer SnS nanoflakes. Comprehensive spectroscopic and structural characterizations, along with density functional theory calculations, confirm that electron beam irradiation introduces abundant sulfur vacancies into the SnS lattice, with the vacancy concentration exhibiting a dose-dependent increase, as evidenced by Raman and X-ray photoelectron spectroscopy analyses. Electrical measurements demonstrate that the irradiated devices exhibit a current increase of two to five orders of magnitude and the pronounced suppression of gate dependence. This irradiation-induced electrical behavior is consistent with a hopping transport mechanism mediated by a percolation network of chalcogen vacancies. This study underscores the advantages of dose-controllable electron beam irradiation for defect engineering in layered SnS, providing critical guidance for rationally tailoring electrical properties in SnS and other layered chalcogenide semiconductors.

  • Open Access

    Tip functionalization of anisotropic plasmonic nanoparticles with conductive polymer patches via site-selective micelle intercalation

    by Bangshuo Zu, Yinfeng Long, Kaitong Deng, Lin Wang, Wenhui Wang, Mingzhu Liu, Mingjie Liu

    Plasmonic patchy nanoparticles (NPs), which consist of polymer domains distributed on metal NP surface, are important for photonics, electronics, and biomedicine applications. However, current synthetic strategies are largely limited to thiol-containing ligands or block copolymers. It remains a challenge to achieve the site-selective positioning of functional conductive polymer patches on a metal NP. Here, we show how micelle intercalation dictates the nucleation sites of polypyrrole (PPy) on anisotropic plasmonic NPs, including Au nanorods (NRs) and triangular nanoprisms. The site-selectivity of the PPy patches is governed by NP local curvature and sodium dodecyl sulphate (SDS) concentration. Moreover, we control over the charge transfer at the PPy and Au interface through HCl doping, offering possible stimuli-responsive properties at single-NP level. Furthermore, we extend the structural complexity via seed-mediated overgrowth and self-assembly. These results establish micelle intercalation as a strategy for programming conductive polymer patches on plasmonic NPs with diverse geometries.

  • Open Access

    Ferroelectricity and Ferroionic Dynamics in Two‐Dimensional CuInP 2 S 6

    by Shangsheng Li, Shiyu Wang, Xiongfeng Wang, Qinglin Du, Ruochen Shangguan, Guoqiang Xi, Lin Wang, Wugang Liao

    Two‐dimensional (2D) van der Waals ferroelectrics have attracted interest for overcoming the scaling limitations of conventional ferroelectric materials owing to their atomic thickness, dangling‐bond‐free interfaces, and natural compatibility with heterostructure integration. Among them, 2D CuInP 2 S 6 (CIPS) is distinct because it simultaneously exhibits room‐temperature ferroelectricity and pronounced ionic conductivity within a single crystalline framework, making it a representative ferroionic material that intrinsically couples polarization order with ionic dynamics. Unlike conventional ferroelectrics, in which polarization reversal is primarily governed by small ionic displacements, the behavior of 2D CIPS is jointly determined by intralayer Cu off‐centering, interlayer Cu relocation, and longer‐range migration through van der Waals gaps. Recent advances further show that this coupled landscape gives rise to multiple polarization states, anomalous field‐driven switching pathways, configurable intralayer/interlayer migration kinetics, and device responses that can be dominated by ferroelectric switching, ionic migration, or their coupling. This review summarizes the crystal structure, Cu‐ion configurational dynamics, temperature and thickness effects, external regulation strategies, synthesis and sample‐quality issues, and device applications of 2D CIPS. Particular emphasis is placed on clarifying the interplay between ferroelectric polarization switching and Cu‐ion migration. This review connects reported observations in 2D CIPS and outlines the critical challenges and opportunities for ferroionic devices, including multistate memory, reconfigurable electronics, and neuromorphic computing.


  • 2D Ferroelectrics and Antiferroelectrics for Neuromorphic Computing Devices

    by Mingyue Yuan, Zirui Zhang, Ce Li, Lin Wang, Linfeng Sun

    Two‐dimensional (2D) van der Waals (vdW) ferroelectric and antiferroelectric (FE/AFE) materials, with atomic‐scale thickness, tunable polarization, and controllable interlayer coupling, have emerged as an ideal platform for next‐generation neuromorphic devices that could overcome the limitations of traditional von Neumann architectures. In this review, we summarize the rich physical properties of 2D vdW FE/AFE materials, including switchable polarization, layer‐dependent ferroelectricity, and antiferroelectric phase transitions, which enable them to mimic diverse functional behaviors. We further discuss their main preparation methods and corresponding device structures, exhibiting low energy consumption, multilevel conductive states, and synaptic plasticity, providing new opportunities for high‐density, low‐power brain‐inspired computing. Finally, we emphasize the significant potential of 2D vdW FE/AFE materials for neuromorphic computing and discuss the current challenges, providing inspiration for both fundamental physics research and device integration and advancing the applications of 2D vdW FE/AFE materials for edge computing‐based high‐performance intelligent devices.


  • UV ozone oxidized high- k TaO x dielectric with van der Waals interface for two-dimensional electronic devices

    by Tong Tong, Yuan Gao, Yinfeng Long, Kan Liao, Han Chen, Long Lin, Xiang Lan, Linghai Zhang, Lin Wang, Yucheng Jiang, et al.

    Two-dimensional (2D) semiconductors are promising channel materials for next-generation field-effect transistors (FETs) due to their superior gate control capabilities, dangling-bond-free surfaces, and high mobility. However, it remains challenging to integrate ultrathin and uniform high-k dielectrics on 2D semiconductors to fabricate FETs with large gate capacitance and clean interfaces. Here, we report a high-k dielectric TaOx prepared via UV ozone oxidation of layered tantalum disulfide (TaS2), with a high effective dielectric constant (εr) of ∼28 and a breakdown field of ∼8 MV/cm. We integrated the TaOx dielectric with 2D semiconductors through van der Waals assembly, exhibiting small hysteresis (<10 mV), a high current on/off ratio approaching 107, a steep subthreshold swing of 64 mV/dec, and a low interface trap density Dit of ∼6.8 × 1011 cm−2 eV−1. By integrating n-type MoS2 and p-type WSe2 transistors with van der Waals dielectric TaOx, we have realized logic circuits with low static power consumption capable of performing NOT, NAND, and NOR operations. Notably, the logic inverter (NOT gate) exhibits a static voltage gain as high as 260. Our dielectric fabrication strategy can be used to integrate 2D materials and amorphous oxide dielectrics, thus offering a promising approach for the development of high-performance low-power electronics.

  • Carrier profiling of ZnO nanowire structures by scanning capacitance microscopy and scanning spreading resistance microscopy

    by Lin Wang

    Profilage porteur de structures de nanofils ZnO par microscopie à capacité de balayage et microscopie à dispersion: Ce travail de thèse porte sur l'application des techniques Scanning Capacitance Microscopy (SCM) et Scanning Spreading Resistance Microscopy (SSRM) pour la caractérisation électrique de nanofils de ZnO avec l'objectif d'en déterminer le dopage par profilage des porteurs libres suite à des essais de dopage de type p. Afin de pouvoir utiliser un référentiel planaire nécessaire à ces mesures par sonde locale, un procédé de remplissage par dip-coating et de polissage a été spécialement développé sur des champs de nanofils quasi-verticaux. De plus, dans le but de parvenir à un étalonnage des mesures SCM et SSRM, nous avons conçu et fait fabriquer des échantillons étalons de dopage de type n, contenant des niveaux de Ga en escalier de densité variable de 2×10^17 à 3×10^20 cm^-3. Les mesures sur des coupes transversales de ces deux de structures multicouches ont permis, pour la première fois sur ZnO d'établir un étalonnage des mesures SCM et SSRM et de déterminer le dopage intrinsèque électriquement actif de couches 2D nanométriques, résultat difficilement atteignable par d'autres techniques d'analyse. Des résultats inattendus de concentration résiduelle de porteur de l'ordre de 2×10^18 et 3×10^18 cm^-3 ont été trouvés sur les nanofils de ZnO crus par MOCVD et par CBD respectivement. Outre la caractérisation électrique microscopique des nanofils par SCM et SSRM, des techniques macroscopiques classiques ont été utilisées pour caractériser des assemblées importantes de nanofils de ZnO. L'origine de la difference entre les résultats de deux genres de technique a été discutée. Nous avons aussi étudié les effets des dopages ex-situ par diffusion du phosphore (procédé SOD) et des dopages in situ par incorporation d'antimoine (Sb) pendant la croissance MOCVD. Les résultats majeurs sont obtenus pour l'antimoine, en utilisant des couches ZnO: Sb 2D et des nanofils cœur-coquille ZnO/ZnO: Sb, ou l'hypothèse d'une compensation partielle du dopage n résiduel par un centre accepteur créé par le dopage Sb semble pouvoir être établie raisonnablement.

  • A Data-Driven ANN-Based Model for FeCAP and FeFET: Orienting to SPICE and Circuit Design

    by Changhao Wang, Sicong Yuan, Nicolò Bellarmino, Danyang Chen, Nima Kolahimahmoudi, Honghao Wang, Hanzhi Xun, Xiuyan Li, Lin Wang, Chujun Yin, et al.

    Physics-based compact models for emerging non-volatile memories (NVMs) are often limited by the complex interactions of microscopic domains and defects that are difficult to capture analytically, resulting in reduced accuracy and simulation efficiency. To address this challenge, a machine learning (ML)-based approach is proposed using artificial neural networks (ANNs) trained entirely on device measurement data, enabling a direct translation of fabrication characteristics into SPICE-compatible circuit models. The resulting models achieve high accuracy (MSE: 0.724, adjusted ${R}^{{2}}$ : 0.998), significantly outperforming physics-based baselines with an $18\times $ lower MSE for polarization and a two-order-of-magnitude precision improvement in FeFET current simulation, while accurately capturing the wake-up process. Furthermore, the model demonstrates robust out-of-distribution (OOD) extrapolation to unseen ferroelectric thicknesses and a 33.7% improvement in simulation speed. These results validate the ML-based approach as a highly efficient, SPICE-compatible solution for next-generation memory.


  • Electrically Tunable WSe 2 /α-In 2 Se 3 van der Waals Ferroelectric Heterostructure for Reconfigurable Photodetection and Neuromorphic Computing

    by Han Chen, Yufeng Ning, Yukang Chen, Jinjian Yan, Jiaxin Chen, Liang Liu, Yinfeng Long, Shiyu Zhang, Kai Liu, Mingfeng Chen, et al.

    The growing demand for compact and energy-efficient hardware in artificial intelligence and edge computing calls for multifunctional electronic systems beyond conventional architectures. van der Waals (vdW) ferroelectric semiconductors, which couple switchable polarization with tunable carrier transport, offer a promising avenue for reconfigurable electronics. Here, we demonstrate a WSe2/α-In2Se3 vdW heterostructure that enables dynamic and nonvolatile reconfiguration of electrical functionality within a single device. Through bias-mediated control of ferroelectric polarization and the associated interfacial carrier redistribution, the heterostructure exhibits dual-mode operation: as a high-performance photodetector with a detectivity exceeding 1012 Jones and as a nonvolatile memory element. Furthermore, the device emulates biological synaptic plasticity, supporting the implementation of artificial neural networks (ANNs) that achieve 96.76% recognition accuracy on the MNIST data set. This work establishes a versatile and electrically reconfigurable platform based on vdW ferroelectric heterojunctions, enabling dual-mode operation for photodetection and neuromorphic computing.


  • Open Access

    Ultralow energy adaptive neuromorphic computing using reconfigurable zinc phosphorus trisulfide memristors

    by Yun Ji, Lin Wang, Yinfeng Long, Jinyong Wang, Haofei Zheng, Zhi Gen Yu, Yong-Wei Zhang, Kah-Wee Ang

    Reconfigurable devices enable adaptive neuromorphic computing by dynamically allocating circuit resources. However, integrating diverse functionalities with ultralow energy consumption in a single device remains challenging. Here, we demonstrate reconfigurable zinc phosphorus trisulfide (ZnPS3) memristors that exhibit both volatile and non-volatile switching with superior performance metrics, including a low switching voltage (~0.180 V), minimal energy consumption (143 aJ per volatile switching), high on/off ratio (107), and 256 distinct conductive states, ideal for implementing adaptive neuromorphic computing. These ZnPS3 memristors can be reconfigured using a single electrical pulse, allowing for on-demand emulation of neuron-like temporal dynamics and synapse-like weight memorization. Leveraging these device characteristics, we developed a reservoir computing network that integrates dynamic physical reservoirs with steady-weighted readouts, successfully achieving 99% accuracy in electrocardiogram classification. Our findings highlight the potential of ZnPS3-based adaptive neuromorphic computing for energy-efficient spatiotemporal signal processing and recognition, advancing the development of ultralow-energy brain-inspired computing systems.