Hang Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Hang Zhang has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Hang Hu
Air Force Engineering University
14 shared publications - Liu Yang
Space Engineering University, Beijing, China
5 shared publications - Fanglin Gu
College of Electronic Science and Engineering, National University of Defense Technology, Changsha, China
4 shared publications - Hong Yu
PLA University of Science and Technology
4 shared publications - Hua Yang
PLA Academy of Military Science, Beijing, China
4 shared publications - Lei Ni
Early Warning Academy, Wuhan 430010, China
4 shared publications
Latest Publications
- 4 March 2024
- Published by Wiley in International Journal of Satellite Communications and Networking
- Vol. 42 (3) , 232-255
Co‐channel interference cancellation based on BSS for multi‐satellite MIMO communication systems with FFR
Summary: Multiple‐input multiple‐output (MIMO) technology can boost the capacity of conventional satellite communications, and full frequency reuse (FFR) can further improve the capacity by making full use of frequency resources. However, FFR will cause severe co‐channel interference and lead to a degradation of channel capacity. Blind source separation (BSS) algorithm can be used to eliminate co‐channel interference and does not require prior information, which avoids the extra occupation of channel frequency resources. While the multi‐satellite MIMO communication system have delay mixing characteristic, the separation performance will be degraded if the delay is ignored. In this paper, DMBSS algorithm for delay mixing is proposed. Firstly, the DMBSS algorithm utilizes Taylor expansion to achieve dimension expansion of observed signals and so as to transform the delay mixing into instantaneous mixing with extended dimension. Secondly, complex non‐orthogonal joint diagonalization algorithm is used to solve the separation matrix equation of extended observation signals and extended source signals and thus to eliminate the co‐channel interference. Simulation results show that for multi‐satellite MIMO communication scenarios with FFR, the proposed algorithm can effectively improve the performance of co‐channel interference cancellation and reduce the value of BER. Furthermore, the influence of order of Taylor expansion on the separation performance is also analyzed and simulated in this paper to show the cost performance of the proposed algorithm.
- 4 March 2024
- Published by Wiley in International Journal of Satellite Communications and Networking
- Vol. 42 (3) , 232-255
Co‐channel interference cancellation based on BSS for multi‐satellite MIMO communication systems with FFR
Summary: Multiple‐input multiple‐output (MIMO) technology can boost the capacity of conventional satellite communications, and full frequency reuse (FFR) can further improve the capacity by making full use of frequency resources. However, FFR will cause severe co‐channel interference and lead to a degradation of channel capacity. Blind source separation (BSS) algorithm can be used to eliminate co‐channel interference and does not require prior information, which avoids the extra occupation of channel frequency resources. While the multi‐satellite MIMO communication system have delay mixing characteristic, the separation performance will be degraded if the delay is ignored. In this paper, DMBSS algorithm for delay mixing is proposed. Firstly, the DMBSS algorithm utilizes Taylor expansion to achieve dimension expansion of observed signals and so as to transform the delay mixing into instantaneous mixing with extended dimension. Secondly, complex non‐orthogonal joint diagonalization algorithm is used to solve the separation matrix equation of extended observation signals and extended source signals and thus to eliminate the co‐channel interference. Simulation results show that for multi‐satellite MIMO communication scenarios with FFR, the proposed algorithm can effectively improve the performance of co‐channel interference cancellation and reduce the value of BER. Furthermore, the influence of order of Taylor expansion on the separation performance is also analyzed and simulated in this paper to show the cost performance of the proposed algorithm.
- Open Access
- 25 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (12) , 12357-12368
Optimization of Energy Efficiency in UAV-Enabled Cognitive IoT With Short Packet Communication
The unmanned aerial vehicle (UAV) assisted communication can significantly improve the coverage and spectrum efficiency of the Internet of Things (IoT). One main feature of IoT is short packet communication (SPC), in which the data transmission uses finite block-length codewords. The transmission rate and the packet error rate will affect the effective throughput of the IoT. In this paper, we investigate the impact of SPC on the performance of UAV-enabled spectrum sharing network. Specifically, the optimization of energy efficiency (EE) in the UAV communication system is considered since the battery of the UAV is usually limited. We design the packet error rate, the sensing duration, the normalized sensing threshold and the UAV’s transmit power to maximize the EE under the constraint that the primary user is sufficiently protected. Since the system parameters are intertwined with each other, we employ a successive optimization algorithm to solve the optimization problem by dividing it into three subproblems. Then, an efficient iterative algorithm is proposed to obtain the optimal parameters. Simulation results reveal that the proposed algorithm can converge to global optimal value and has better EE performance than other benchmark schemes. And there is a fundamental tradeoff between the throughput and the EE.
- 25 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (12) , 12357-12368
Open AccessOptimization of Energy Efficiency in UAV-Enabled Cognitive IoT With Short Packet Communication
The unmanned aerial vehicle (UAV) assisted communication can significantly improve the coverage and spectrum efficiency of the Internet of Things (IoT). One main feature of IoT is short packet communication (SPC), in which the data transmission uses finite block-length codewords. The transmission rate and the packet error rate will affect the effective throughput of the IoT. In this paper, we investigate the impact of SPC on the performance of UAV-enabled spectrum sharing network. Specifically, the optimization of energy efficiency (EE) in the UAV communication system is considered since the battery of the UAV is usually limited. We design the packet error rate, the sensing duration, the normalized sensing threshold and the UAV’s transmit power to maximize the EE under the constraint that the primary user is sufficiently protected. Since the system parameters are intertwined with each other, we employ a successive optimization algorithm to solve the optimization problem by dividing it into three subproblems. Then, an efficient iterative algorithm is proposed to obtain the optimal parameters. Simulation results reveal that the proposed algorithm can converge to global optimal value and has better EE performance than other benchmark schemes. And there is a fundamental tradeoff between the throughput and the EE.
- 18 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 9 (11) , 9071-9085
ESCVAD: An Energy-Saving Routing Protocol Based on Voronoi Adaptive Clustering for Wireless Sensor Networks
An excellent routing protocol is important for wireless sensor network (WSN) construction and efficient data transmission. With the continuous expansion of the application scenarios and scopes of the Internet of Things, the existing WSN routing protocols are no longer suitable for the complex network structure and the huge demands of communications. Aiming at these issues of existing routing protocols, such as short network lifetime caused by high energy consumption and uneven distribution of surviving nodes, this article proposes an energy-saving clustering protocol based on adaptive Voronoi dividing, named energy-saving clustering by Voronoi adaptive dividing (ESCVAD) protocol. The innovation of ESCVAD protocol lies in the adaptive clustering algorithm based on Voronoi dividing and cluster head election optimization algorithm based on distance and energy comprehensive weighting. The advantage of proposed algorithms is effectively to balance the energy consumption between cluster head nodes and cluster member nodes. The simulation results show that, compared with the traditional routing protocols, such as low energy adaptive clustering hierarchy (LEACH) protocol and stable energy protocol (SEP), the proposed ESCVAD protocol can effectively reduce the clustering frequency and cluster head electing frequency, so as to reduce signaling interaction frequency, finally result in the energy consumption down and the network lifetime up. Among the six protocols for comparation, ESCVAD has the best network lifetime and energy efficiency.
- 18 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 9 (11) , 9071-9085
ESCVAD: An Energy-Saving Routing Protocol Based on Voronoi Adaptive Clustering for Wireless Sensor Networks
An excellent routing protocol is important for wireless sensor network (WSN) construction and efficient data transmission. With the continuous expansion of the application scenarios and scopes of the Internet of Things, the existing WSN routing protocols are no longer suitable for the complex network structure and the huge demands of communications. Aiming at these issues of existing routing protocols, such as short network lifetime caused by high energy consumption and uneven distribution of surviving nodes, this article proposes an energy-saving clustering protocol based on adaptive Voronoi dividing, named energy-saving clustering by Voronoi adaptive dividing (ESCVAD) protocol. The innovation of ESCVAD protocol lies in the adaptive clustering algorithm based on Voronoi dividing and cluster head election optimization algorithm based on distance and energy comprehensive weighting. The advantage of proposed algorithms is effectively to balance the energy consumption between cluster head nodes and cluster member nodes. The simulation results show that, compared with the traditional routing protocols, such as low energy adaptive clustering hierarchy (LEACH) protocol and stable energy protocol (SEP), the proposed ESCVAD protocol can effectively reduce the clustering frequency and cluster head electing frequency, so as to reduce signaling interaction frequency, finally result in the energy consumption down and the network lifetime up. Among the six protocols for comparation, ESCVAD has the best network lifetime and energy efficiency.
- 21 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 21 (3) , 3933-3943
Optimization of Energy Utilization in Cognitive UAV Systems
Wireless communication with unmanned aerial vehicle (UAV) has attracted much attention due to its flexibility and low-cost in providing wireless connectivity. In this paper, we investigate the spectrum sharing between UAV and terrestrial wireless communication. Two scenarios are considered in this work. Scenario 1: the UAV is energy sufficient to transmit the required data. In this case, our objective is to minimize the time that is needed to complete data transmission. Scenario 2: the battery of the UAV is energy insufficient. In this case, the goal becomes maximizing the size of data that can be transmitted. Different scenarios require different placement of the UAV. When the UAV flies towards the primary user (PU), the sensing result will be more accurate and more opportunities can be utilized to transmit data. However, the interference to primary receiver (PR) and the propulsion energy due to UAV’s movement will be increased. In this paper, the sensing performance, the power allocation and the UAV’s position are jointly optimized to satisfy different requirements of the UAV system. To efficiently utilize the licensed spectrum, a hybrid transmission mode is proposed for the UAV system, in which sensing and power control are jointly employed to protect the PR. Then, efficient iterative algorithms are proposed to solve the optimization problems. Simulations results show that proposed designs can significantly reduce the time that is required to complete data transmission in energy sufficient scenario and enhance the size of data that can be transferred in energy insufficient scenario.
- 21 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 21 (3) , 3933-3943
Optimization of Energy Utilization in Cognitive UAV Systems
Wireless communication with unmanned aerial vehicle (UAV) has attracted much attention due to its flexibility and low-cost in providing wireless connectivity. In this paper, we investigate the spectrum sharing between UAV and terrestrial wireless communication. Two scenarios are considered in this work. Scenario 1: the UAV is energy sufficient to transmit the required data. In this case, our objective is to minimize the time that is needed to complete data transmission. Scenario 2: the battery of the UAV is energy insufficient. In this case, the goal becomes maximizing the size of data that can be transmitted. Different scenarios require different placement of the UAV. When the UAV flies towards the primary user (PU), the sensing result will be more accurate and more opportunities can be utilized to transmit data. However, the interference to primary receiver (PR) and the propulsion energy due to UAV’s movement will be increased. In this paper, the sensing performance, the power allocation and the UAV’s position are jointly optimized to satisfy different requirements of the UAV system. To efficiently utilize the licensed spectrum, a hybrid transmission mode is proposed for the UAV system, in which sensing and power control are jointly employed to protect the PR. Then, efficient iterative algorithms are proposed to solve the optimization problems. Simulations results show that proposed designs can significantly reduce the time that is required to complete data transmission in energy sufficient scenario and enhance the size of data that can be transferred in energy insufficient scenario.
- 18 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 9 (9) , 1505-1508
Optimization of Energy Management for UAV-Enabled Cognitive Radio
The deployment of unmanned aerial vehicle (UAV)-enabled cognitive radio system in the area covered by primary network is studied in this letter. The UAV shares the spectrum with primary user (PU) and aims to maximize the transmitted bits with limited battery capacity. When the UAV flies towards the primary transmitter, the sensing performance and throughput of the UAV system will be improved. However, the energy consumption increases linearly with the flying distance. The goal of this letter is to find the optimal position of the UAV and optimize the sensing performance as well as the power allocation such that the transmitted bits is maximized while the PU is sufficiently protected. An iterative optimization algorithm is proposed to obtain the system parameters. Simulation results show the efficiency of the proposed approach in terms of transmitted bits as compared to other schemes.
- 18 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 9 (9) , 1505-1508
Optimization of Energy Management for UAV-Enabled Cognitive Radio
The deployment of unmanned aerial vehicle (UAV)-enabled cognitive radio system in the area covered by primary network is studied in this letter. The UAV shares the spectrum with primary user (PU) and aims to maximize the transmitted bits with limited battery capacity. When the UAV flies towards the primary transmitter, the sensing performance and throughput of the UAV system will be improved. However, the energy consumption increases linearly with the flying distance. The goal of this letter is to find the optimal position of the UAV and optimize the sensing performance as well as the power allocation such that the transmitted bits is maximized while the PU is sufficiently protected. An iterative optimization algorithm is proposed to obtain the system parameters. Simulation results show the efficiency of the proposed approach in terms of transmitted bits as compared to other schemes.
- Open Access
- 5 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 162115-162126
SE and EE Optimization for Cognitive UAV Network Based on Location Information
Unmanned Aerial Vehicle (UAV) aided communication has the potential to provide on-demand wireless services and improve the outdoor link throughput. Applications for UAVs are rapidly growing with the development of Internet of Things. Because of limited battery energy, the UAVs need time-limited spectrum access to complete data transmission. Hence there are two challenges for the UAV-based communication: 1) Spectrum-efficient design; 2) Energy-efficient design. In this paper, we investigate the optimization of spectrum efficiency (SE) and energy efficiency (EE) for cognitive UAV network based on location information. Because of high mobility, the cognitive radio (CR) based UAVs operate on different frequency bands that vary with time and space. Thus, one spectrum band that is available in one region may not be necessarily available in another region. Based on location information of the primary transmitter and the UAV, we propose a hybrid mode in which the sensing performance and UAV’s transmit power can be adjusted simultaneously to satisfy the outage constraint of the primary user. The multi-objective optimization theory is used to solve the tradeoff between SE and EE. The UAV’s transmit power, sensing time and sensing threshold are optimized jointly to solve the tradeoff problem. To further improve the SE and EE performance, we propose a multi-frame combined sensing scheme, in which multiple frames are bundled together. Simulation results are provided to show the SE-EE tradeoff design, to validate the effectiveness of the proposed hybrid mode, and to show the advantages of the multi-frame combined sensing scheme in EE performance.
- 5 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 162115-162126
Open AccessSE and EE Optimization for Cognitive UAV Network Based on Location Information
Unmanned Aerial Vehicle (UAV) aided communication has the potential to provide on-demand wireless services and improve the outdoor link throughput. Applications for UAVs are rapidly growing with the development of Internet of Things. Because of limited battery energy, the UAVs need time-limited spectrum access to complete data transmission. Hence there are two challenges for the UAV-based communication: 1) Spectrum-efficient design; 2) Energy-efficient design. In this paper, we investigate the optimization of spectrum efficiency (SE) and energy efficiency (EE) for cognitive UAV network based on location information. Because of high mobility, the cognitive radio (CR) based UAVs operate on different frequency bands that vary with time and space. Thus, one spectrum band that is available in one region may not be necessarily available in another region. Based on location information of the primary transmitter and the UAV, we propose a hybrid mode in which the sensing performance and UAV’s transmit power can be adjusted simultaneously to satisfy the outage constraint of the primary user. The multi-objective optimization theory is used to solve the tradeoff between SE and EE. The UAV’s transmit power, sensing time and sensing threshold are optimized jointly to solve the tradeoff problem. To further improve the SE and EE performance, we propose a multi-frame combined sensing scheme, in which multiple frames are bundled together. Simulation results are provided to show the SE-EE tradeoff design, to validate the effectiveness of the proposed hybrid mode, and to show the advantages of the multi-frame combined sensing scheme in EE performance.
- 17 October 2019
- Published by Springer Nature in Wireless Personal Communications
- Vol. 111 (2) , 853-865
Full-Duplex Cognitive Radio with RF Energy Harvesting
- 17 October 2019
- Published by Springer Nature in Wireless Personal Communications
- Vol. 111 (2) , 853-865
Full-Duplex Cognitive Radio with RF Energy Harvesting
- Open Access
- 13 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 82277-82287
Achievable Throughput Analysis and Channel Access in Energy Harvesting Cognitive Radio Sensor Network
In this paper, we consider an energy harvesting cognitive radio sensor network (EH-CRSN), which is composed of multiple secondary users (sensor nodes) opportunistically access licensed channels. We first propose a novel single-sink EH-CRSN and derive its network throughput. Then, we extend the EH-CRSN to the multi-sink case which will cause the interference among secondary communications. To deal with this problem, we optimize channel access schedule, so as to maximize the network throughput in many actual large-scale scenarios. Specifically, we formulate a mixed interaction game and demonstrated the existence of Nash equilibrium. A stochastic learning automata (SLA) based channel selecting algorithm is further proposed to achieve the Nash equilibrium. Finally, simulation results verify the validity of network throughput function in single-sink EH-CRSN and show that the proposed solution can get the maximum or near-maximum system throughput.
- 13 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 82277-82287
Open AccessAchievable Throughput Analysis and Channel Access in Energy Harvesting Cognitive Radio Sensor Network
In this paper, we consider an energy harvesting cognitive radio sensor network (EH-CRSN), which is composed of multiple secondary users (sensor nodes) opportunistically access licensed channels. We first propose a novel single-sink EH-CRSN and derive its network throughput. Then, we extend the EH-CRSN to the multi-sink case which will cause the interference among secondary communications. To deal with this problem, we optimize channel access schedule, so as to maximize the network throughput in many actual large-scale scenarios. Specifically, we formulate a mixed interaction game and demonstrated the existence of Nash equilibrium. A stochastic learning automata (SLA) based channel selecting algorithm is further proposed to achieve the Nash equilibrium. Finally, simulation results verify the validity of network throughput function in single-sink EH-CRSN and show that the proposed solution can get the maximum or near-maximum system throughput.
- 7 May 2019
- Published by Springer Nature
- p. 717-726
Blind Source Separation for Satellite Communication Anti-jamming
- 7 May 2019
- Published by Springer Nature
- p. 717-726
Blind Source Separation for Satellite Communication Anti-jamming
- 11 December 2018
- Published by Wiley in International Journal of Satellite Communications and Networking
- Vol. 37 (6) , 527-535
An anti‐repeater‐jamming approach based on blind source separation for the downlink of satellite communication systems
Summary: In this paper, an anti‐jamming approach is proposed for the downlink of satellite communication systems when encountering a hostile repeater‐jamming. Based on blind source separation, this approach can eliminate repeater‐jamming by separating the mixtures of the communication signals and the repeater‐jamming. Meanwhile, oversampling method is employed to transform the underdetermined mixing of signals into a determined mixing for facilitating the separation. In the simulations, the symbol error ratio (SER) of the separated communication signals can approximate the theory SER, and the anti‐repeater‐jamming capacity can arrive to nearly 28 dB.
- 11 December 2018
- Published by Wiley in International Journal of Satellite Communications and Networking
- Vol. 37 (6) , 527-535
An anti‐repeater‐jamming approach based on blind source separation for the downlink of satellite communication systems
Summary: In this paper, an anti‐jamming approach is proposed for the downlink of satellite communication systems when encountering a hostile repeater‐jamming. Based on blind source separation, this approach can eliminate repeater‐jamming by separating the mixtures of the communication signals and the repeater‐jamming. Meanwhile, oversampling method is employed to transform the underdetermined mixing of signals into a determined mixing for facilitating the separation. In the simulations, the symbol error ratio (SER) of the separated communication signals can approximate the theory SER, and the anti‐repeater‐jamming capacity can arrive to nearly 28 dB.