Dimuth Navaratna
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Dimuth Navaratna has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Shobha Muthukumaran
Institute for Sustainable Industries and Liveable Cities, College of Sport, Health and Engineering, Victoria University, Melbourne, VIC 3011, Australia
9 shared publications - Veeriah Jegatheesan
School of Engineering, RMIT University, Melbourne, VIC 3000, Australia
8 shared publications - Rajneesh Kumar Gautam
Department of Aquatic Sciences and Assessment, Swedish University of Agricultural Sciences (SLU), P.O. Box 7050, SE-75007 Uppsala, Sweden
4 shared publications - Ashok Kumar Sharma
Institute for Sustainable Industries and Liveable Cities, Victoria University, Melbourne, VIC 3011, Australia
3 shared publications Nandkishor More
3 shared publications- Peter Sanciolo
Institute for Sustainable Industries & Liveable Cities, Victoria University, Melbourne, VIC 3011, Australia
3 shared publications
Latest Publications
- Open Access
Barriers to Construction and Demolition Waste Management in Australia: A Comparative Analysis for Advancing Circular Economy Practices
The Australian construction industry generated approximately 29.2 million metric tonnes (Mt) of construction and demolition waste (C&DW) in 2022–2023, of which about 23.7 Mt (81.2%) was recovered, primarily through recycling (80.6%). Recovery concentrated on concrete, bricks, and rubble from large constructions, while C&DW from smaller projects was often directed to landfills. Most recovered materials are downcycled, have low market demand and contribute to unstable markets and continued reliance on virgin materials. To investigate these gaps, nine semi-structured expert interviews, two case studies, and a SWOT (Strengths, Weaknesses, Opportunities and Threats) analysis were conducted. The findings were organised into four clusters: (1) regulatory and governance, (2) operational and technological, (3) procurement, cost and market, and (4) stakeholder management barriers significantly impact C&D waste management practices. The study recommends four drivers and six enablers to enhance circular economy 3R (reduce, reuse, recycle) practices, including standardisation and harmonisation of reused and recycled products’ quality and cost, mandating circular procurement, increasing incentives and penalties, on-site sorting, awareness and capacity building, and digital technology application for data management. This integrated approach can guide policymakers and practitioners in strengthening C&DW reduction practices and developing an economically viable market for reused and recycled products.
Open AccessBarriers to Construction and Demolition Waste Management in Australia: A Comparative Analysis for Advancing Circular Economy Practices
The Australian construction industry generated approximately 29.2 million metric tonnes (Mt) of construction and demolition waste (C&DW) in 2022–2023, of which about 23.7 Mt (81.2%) was recovered, primarily through recycling (80.6%). Recovery concentrated on concrete, bricks, and rubble from large constructions, while C&DW from smaller projects was often directed to landfills. Most recovered materials are downcycled, have low market demand and contribute to unstable markets and continued reliance on virgin materials. To investigate these gaps, nine semi-structured expert interviews, two case studies, and a SWOT (Strengths, Weaknesses, Opportunities and Threats) analysis were conducted. The findings were organised into four clusters: (1) regulatory and governance, (2) operational and technological, (3) procurement, cost and market, and (4) stakeholder management barriers significantly impact C&D waste management practices. The study recommends four drivers and six enablers to enhance circular economy 3R (reduce, reuse, recycle) practices, including standardisation and harmonisation of reused and recycled products’ quality and cost, mandating circular procurement, increasing incentives and penalties, on-site sorting, awareness and capacity building, and digital technology application for data management. This integrated approach can guide policymakers and practitioners in strengthening C&DW reduction practices and developing an economically viable market for reused and recycled products.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Water Research & Technology
Sustainable brine management challenges and opportunities in small-scale inland reverse osmosis (RO) plants: a Sri Lankan case study
This study assesses brine management and environmental risks in 32 inland RO plants in Anuradhapura District, Sri Lanka, demonstrating the potential to recover valuable minerals and support sustainable brine management.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Water Research & Technology
Sustainable brine management challenges and opportunities in small-scale inland reverse osmosis (RO) plants: a Sri Lankan case study
This study assesses brine management and environmental risks in 32 inland RO plants in Anuradhapura District, Sri Lanka, demonstrating the potential to recover valuable minerals and support sustainable brine management.
- Open Access
- 6 May 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 491
Investigating effective strategies for sustainable operation of a submerged anaerobic membrane bioreactor (SAnMBR) coupled with ceramic ultrafiltration membrane
- 6 May 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 491
Open AccessInvestigating effective strategies for sustainable operation of a submerged anaerobic membrane bioreactor (SAnMBR) coupled with ceramic ultrafiltration membrane
- Top Cited PapersOpen Access
- 15 April 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (8) , 3289
Review on Sustainable Construction and Demolition Waste Management—Challenges and Research Prospects
(1) Background: Globally, numerous development projects are being undertaken to expand and improve urban infrastructure facilities, which result in around 30% to 40% of construction and demolition (C&D) waste in the total waste generation. Due to its detrimental impacts on the environment and human health, several researchers have been striving to find effective methods to manage these large amounts of C&D wastes to minimise environmental impacts and maximise the economic and social benefits. Despite these efforts, limited studies have focused on comprehensively reviewing the integrated sustainable management of C&D waste. Thus, this study aims to conduct a comprehensive review of the published literature to identify barriers that hinder sustainable C&D waste management practices and map future research areas for effective C&D waste management. (2) Methods: A two-step systematic approach was adopted where the first step involved a bibliometric assessment of the published literature from 2002 to 2022, and then the most significant publications were reviewed from the bibliometric findings to achieve this study aim. (3) Results: The review findings identifies several research gaps which were categorised according to seven themes, including limitations in operational aspects, the lack of monitoring of legislation and regulations, an inadequate market for recycled products, inefficient stakeholder engagement and management, limitations of effective framework/models for sustainable C&D waste management, limited research on social performance, and inadequate integration of information technology in C&D waste management. This study’s findings are invaluable for researchers, industry professionals, and policymakers for in-depth understanding of the boundaries and potential future research areas to enhance sustainable C&D waste management practices.
- 15 April 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (8) , 3289
Top Cited PapersOpen AccessReview on Sustainable Construction and Demolition Waste Management—Challenges and Research Prospects
(1) Background: Globally, numerous development projects are being undertaken to expand and improve urban infrastructure facilities, which result in around 30% to 40% of construction and demolition (C&D) waste in the total waste generation. Due to its detrimental impacts on the environment and human health, several researchers have been striving to find effective methods to manage these large amounts of C&D wastes to minimise environmental impacts and maximise the economic and social benefits. Despite these efforts, limited studies have focused on comprehensively reviewing the integrated sustainable management of C&D waste. Thus, this study aims to conduct a comprehensive review of the published literature to identify barriers that hinder sustainable C&D waste management practices and map future research areas for effective C&D waste management. (2) Methods: A two-step systematic approach was adopted where the first step involved a bibliometric assessment of the published literature from 2002 to 2022, and then the most significant publications were reviewed from the bibliometric findings to achieve this study aim. (3) Results: The review findings identifies several research gaps which were categorised according to seven themes, including limitations in operational aspects, the lack of monitoring of legislation and regulations, an inadequate market for recycled products, inefficient stakeholder engagement and management, limitations of effective framework/models for sustainable C&D waste management, limited research on social performance, and inadequate integration of information technology in C&D waste management. This study’s findings are invaluable for researchers, industry professionals, and policymakers for in-depth understanding of the boundaries and potential future research areas to enhance sustainable C&D waste management practices.
- Open Access
- 28 February 2024
- Published by Elsevier in Biochemical Engineering Journal
- Vol. 205
Biomethane recovery performance and microbial community dynamics of a high-biomass submerged AnMBR (HBSAnMBR) treating abattoir wastewater
- 28 February 2024
- Published by Elsevier in Biochemical Engineering Journal
- Vol. 205
Open AccessBiomethane recovery performance and microbial community dynamics of a high-biomass submerged AnMBR (HBSAnMBR) treating abattoir wastewater
- Open Access
Stormwater Treatment Using Natural and Engineered Options in an Urban Growth Area: A Case Study in the West of Melbourne
The expected increase in urbanization and population in coming years is going to increase the impervious land area, leading to substantial increases in stormwater runoff and hydrological challenges, and presents significant challenges for urban potable water supply. These are worldwide challenges that can potentially be ameliorated by harvesting stormwater for potable use or for other uses that can reduce the pressure on potable water supply. This study sought to assist the local water authority in planning for future potable water supply through a review of the scientific literature to determine the likely chemical and microbial characteristics of stormwater, the treatment train (TT) requirements, and the likely costs of treatment to achieve potable standards for the high-growth metropolitan region of Melbourne, Australia. Literature stormwater quality statistical data and treatment process performance data were used to model the expected product water microbial and chemical quality after treatment using a number of advanced TT options. The results of the modelling were compared with literature microbial log reduction targets (LRTs) for the potable use of stormwater and with the Australian Drinking Water Guidelines (ADWG). It was found that a reverse osmosis (RO)-based TT with microfiltration pre-treatment and post-RO advanced oxidation and chlorination in storage reservoirs is a conservative stormwater potable use treatment option. A less conservative and less expensive ozone-and-biologically active filtration (O3/BAF)-based TT option is also proposed if RO concentrate disposal is deemed to be too challenging. These results could be useful in climate change adaptation involving the evaluation of options for the mitigation of future population-growth- and climate-change-driven water supply challenges, as well as urbanization-driven stormwater hydrology and receiving water pollution challenges.
Open AccessStormwater Treatment Using Natural and Engineered Options in an Urban Growth Area: A Case Study in the West of Melbourne
The expected increase in urbanization and population in coming years is going to increase the impervious land area, leading to substantial increases in stormwater runoff and hydrological challenges, and presents significant challenges for urban potable water supply. These are worldwide challenges that can potentially be ameliorated by harvesting stormwater for potable use or for other uses that can reduce the pressure on potable water supply. This study sought to assist the local water authority in planning for future potable water supply through a review of the scientific literature to determine the likely chemical and microbial characteristics of stormwater, the treatment train (TT) requirements, and the likely costs of treatment to achieve potable standards for the high-growth metropolitan region of Melbourne, Australia. Literature stormwater quality statistical data and treatment process performance data were used to model the expected product water microbial and chemical quality after treatment using a number of advanced TT options. The results of the modelling were compared with literature microbial log reduction targets (LRTs) for the potable use of stormwater and with the Australian Drinking Water Guidelines (ADWG). It was found that a reverse osmosis (RO)-based TT with microfiltration pre-treatment and post-RO advanced oxidation and chlorination in storage reservoirs is a conservative stormwater potable use treatment option. A less conservative and less expensive ozone-and-biologically active filtration (O3/BAF)-based TT option is also proposed if RO concentrate disposal is deemed to be too challenging. These results could be useful in climate change adaptation involving the evaluation of options for the mitigation of future population-growth- and climate-change-driven water supply challenges, as well as urbanization-driven stormwater hydrology and receiving water pollution challenges.
- Open Access
Stormwater Harvesting Potential for Local Reuse in an Urban Growth Area: A Case Study of Melton Growth Area in the West of Melbourne
Integrated urban water management approaches (IUWM) are implemented to address challenges from increases in water demand as a result of population growth and the impact of climate change. IUWM aims to utilize all water resources (stormwater, wastewater, and rainwater) based on fit-for-purpose concepts. Here, a local water utility in Melbourne’s Melton growth area explored the availability of stormwater as an alternative water resource for water service planning for a proposed residential development in an existing greenfield area of 13,890 hectares for 160,000 new houses by 2040. A methodology was developed for assessing the stormwater quantity and quality under land use change and different climatic conditions considering the availability of stormwater from the proposed urban development. The modelling results indicated that the amount of annual stormwater generated in the region increased by nearly four times to 32 GL/year under the 2040 full urban land use with high climate change. The provision of constructed wetlands in proposed development blocks was found to be efficient at removing TSS, TP, and TN, and able to retain over 90% of TSS, 77% of TP, and 52% of TN in all scenarios. Harvested stormwater, if treated to potable standards, can meet nearly 40% of water requirements for residential area needs.
Open AccessStormwater Harvesting Potential for Local Reuse in an Urban Growth Area: A Case Study of Melton Growth Area in the West of Melbourne
Integrated urban water management approaches (IUWM) are implemented to address challenges from increases in water demand as a result of population growth and the impact of climate change. IUWM aims to utilize all water resources (stormwater, wastewater, and rainwater) based on fit-for-purpose concepts. Here, a local water utility in Melbourne’s Melton growth area explored the availability of stormwater as an alternative water resource for water service planning for a proposed residential development in an existing greenfield area of 13,890 hectares for 160,000 new houses by 2040. A methodology was developed for assessing the stormwater quantity and quality under land use change and different climatic conditions considering the availability of stormwater from the proposed urban development. The modelling results indicated that the amount of annual stormwater generated in the region increased by nearly four times to 32 GL/year under the 2040 full urban land use with high climate change. The provision of constructed wetlands in proposed development blocks was found to be efficient at removing TSS, TP, and TN, and able to retain over 90% of TSS, 77% of TP, and 52% of TN in all scenarios. Harvested stormwater, if treated to potable standards, can meet nearly 40% of water requirements for residential area needs.
- Open Access
- 28 February 2023
- Published by Elsevier in Chemical Engineering Journal
- Vol. 463, 142145
Evaluation of long-term operational and treatment performance of a high-biomass submerged anaerobic membrane bioreactor treating abattoir wastewater
- 28 February 2023
- Published by Elsevier in Chemical Engineering Journal
- Vol. 463, 142145
Open AccessEvaluation of long-term operational and treatment performance of a high-biomass submerged anaerobic membrane bioreactor treating abattoir wastewater
- Open Access
A Comparative Evaluation of Conceptual Rainfall–Runoff Models for a Catchment in Victoria Australia Using eWater Source
Hydrological modelling at a catchment scale was conducted to investigate the impact of climate change and land-use change individually and in combination with the available streamflow in the Painkalac catchment using an eWater Source hydrological model. This study compares the performance of three inbuilt conceptual models within eWater Source, such as the Australian water balance model (AWBM), Sacramento and GR4J for streamflow simulation. The three-model performance was predicted by bivariate statistics (Nash–Sutcliff efficiency) and univariate (mean, standard deviation) to evaluate the efficiency of model runoff predictions. Potential evapotranspiration (PET) data, daily rainfall data and observed streamflow measured from this catchment are the major inputs to these models. These models were calibrated and validated using eight objective functions while further comparisons of these models were made using objective functions of a Nash–Sutcliffe efficiency (NSE) log daily and an NSE log daily bias penalty. The observed streamflow data were split into three sections. Two-thirds of the data were used for calibration while the remaining one-third of the data was used for validation of the model. Based on the results, it was observed that the performance of the GR4J model is more suitable for the Painkalac catchment in respect of prediction and computational efficiency compared to the Sacramento and AWBM models. Further, the impact of climate change, land-use change and combined scenarios (land-use and climate change) were evaluated using the GR4J model. The results of this study suggest that the higher climate change for the year 2065 will result in approximately 45.67% less streamflow in the reservoir. In addition, the land-use change resulted in approximately 42.26% less flow while combined land-use and higher climate change will produce 48.06% less streamflow compared to the observed flow under the existing conditions.
Open AccessA Comparative Evaluation of Conceptual Rainfall–Runoff Models for a Catchment in Victoria Australia Using eWater Source
Hydrological modelling at a catchment scale was conducted to investigate the impact of climate change and land-use change individually and in combination with the available streamflow in the Painkalac catchment using an eWater Source hydrological model. This study compares the performance of three inbuilt conceptual models within eWater Source, such as the Australian water balance model (AWBM), Sacramento and GR4J for streamflow simulation. The three-model performance was predicted by bivariate statistics (Nash–Sutcliff efficiency) and univariate (mean, standard deviation) to evaluate the efficiency of model runoff predictions. Potential evapotranspiration (PET) data, daily rainfall data and observed streamflow measured from this catchment are the major inputs to these models. These models were calibrated and validated using eight objective functions while further comparisons of these models were made using objective functions of a Nash–Sutcliffe efficiency (NSE) log daily and an NSE log daily bias penalty. The observed streamflow data were split into three sections. Two-thirds of the data were used for calibration while the remaining one-third of the data was used for validation of the model. Based on the results, it was observed that the performance of the GR4J model is more suitable for the Painkalac catchment in respect of prediction and computational efficiency compared to the Sacramento and AWBM models. Further, the impact of climate change, land-use change and combined scenarios (land-use and climate change) were evaluated using the GR4J model. The results of this study suggest that the higher climate change for the year 2065 will result in approximately 45.67% less streamflow in the reservoir. In addition, the land-use change resulted in approximately 42.26% less flow while combined land-use and higher climate change will produce 48.06% less streamflow compared to the observed flow under the existing conditions.
- Open Access
- 31 May 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (11) , 6753
Food Waste Diversion from Landfills: A Cost–Benefit Analysis of Existing Technological Solutions Based on Greenhouse Gas Emissions
Landfill disposals of food result in fugitive emissions of methane—a powerful greenhouse gas (GHG). This desktop study focuses on the cost and GHG emissions associated with food waste diversion from landfills using aerobic digesters with liquid outputs (ADLO). Despite the emerging popularity of ADLO units for food waste disposal, their cost and the GHG emissions associated with their use have not been independently quantified and compared to those of other food waste management options. This study compared landfill disposals, the currently available composting services, electric food dehydrators, and in-sink waste disposal units (garbage grinders). For a food waste production rate of 30 kg d−1, the landfill base case showed the lowest cost at USD 23 week−1. The modeled ADLO cost ranged from USD 20–42 week−1, depending on performance. Dehydrator costs were high at USD 29 week−1, largely due to the high energy intensity of the process. The cost of the current centralized composting was USD 51 week−1. The ADLO option with good performance was estimated to produce 5% of the GHG emissions of a landfill. This study showed that well-performing ADLO technology can be economically competitive with landfills and centralized composting and can markedly reduce GHG emissions.
- 31 May 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (11) , 6753
Open AccessFood Waste Diversion from Landfills: A Cost–Benefit Analysis of Existing Technological Solutions Based on Greenhouse Gas Emissions
Landfill disposals of food result in fugitive emissions of methane—a powerful greenhouse gas (GHG). This desktop study focuses on the cost and GHG emissions associated with food waste diversion from landfills using aerobic digesters with liquid outputs (ADLO). Despite the emerging popularity of ADLO units for food waste disposal, their cost and the GHG emissions associated with their use have not been independently quantified and compared to those of other food waste management options. This study compared landfill disposals, the currently available composting services, electric food dehydrators, and in-sink waste disposal units (garbage grinders). For a food waste production rate of 30 kg d−1, the landfill base case showed the lowest cost at USD 23 week−1. The modeled ADLO cost ranged from USD 20–42 week−1, depending on performance. Dehydrator costs were high at USD 29 week−1, largely due to the high energy intensity of the process. The cost of the current centralized composting was USD 51 week−1. The ADLO option with good performance was estimated to produce 5% of the GHG emissions of a landfill. This study showed that well-performing ADLO technology can be economically competitive with landfills and centralized composting and can markedly reduce GHG emissions.