AKAmbarish Kulkarni

Ambarish Kulkarni

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ambarish Kulkarni has a total of 197 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Local Structural Coherence and Interfacial Charge Transfer in Cu 2 S / Mo S 2 Heterostructure

    by Ankita Kumari, S. Avery Vigil, Konstantina G. Mason, Saurabh Sivakumar, Ahmed H. Biby, Pranay Ninawe, Charles B. Musgrave, Ambarish R. Kulkarni, Ivan A. Moreno-Hernandez, Jesús M. Velázquez

    Precise control over electronic coupling at nanoscale interfaces is critical for designing materials with tunable charge-transfer behavior and catalytic function. Heterostructures with locally coherent interfaces provide a platform for interrogating interfacial charge redistribution in coupled material systems. Here, we report Cu 2 S / Mo S 2 heterostructures exhibiting nanoscale crystallographic alignment, which are synthesized through a rapid thermal transformation pathway. We employed electrochemical reduction reactions to probe interfacial charge transfer, revealing shifts in product distribution attributable to modified interfacial energetics, even in the absence of optimized catalytic performance. The observed formate Faradaic efficiency suggests that interfacial electronic modulation in the heterostructure shifts product selectivity towards formate, highlighting how interface-driven electronic modulation can direct reaction pathways and influence product selectivity. Optimizing catalyst loading, architecture, and reactor configuration will be critical for future improvement. Structural and compositional integrity were confirmed through powder x-ray diffraction, x-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy. Electron transfer between Cu 2 S and Mo S 2 domains was further evaluated by electrochemical impedance spectroscopy, while selected-area electron diffraction revealed local crystallographic alignment consistent with a local epitaxial relationship at the Cu 2 S / Mo S 2 heterointerface. To illustrate the broader applicability of this approach, a Zn S / Mo S 2 heterostructure was also synthesized using the same microwave strategy, confirming the generalizability of interfacial engineering principles across metal sulfide- Mo S 2 systems. Collectively, these findings demonstrate that controlled local epitaxial alignment serves as an effective design principle for tuning interfacial energetics and catalytic reactivity in complex heterostructure materials.

  • Tunable CO 2 Capture and Release Using Redox-Switchable Carboranes

    by Gustavo M. Alcántara, Alexandra Hankins, Sabrina Hussain, Jiawei Guo, Saurabh P. Sivakumar, Matthew Avalos, Guang Wu, Wen Zhou, Ambarish Kulkarni, Gabriel Ménard

    We report the use of redox-switchable carboranes for the tunable and reversible capture of CO2. Two substituted 1-PR2-2-BR'2-ortho-carboranes (denoted R/R'Cb) with Lewis acid (LA) and Lewis base (LB) groups were synthesized. These were Ph/CyCb containing weaker LB/LA groups, and tBu/C6F5Cb with stronger LB/LA groups. While closo forms of these were unreactive to CO2, reduction using KC8 yielded reactive nido species. The reduced compound, [K(18-c-6)]2[Ph/CyCb] (18-c-6 = 18-crown-6), captured and reduced CO2 to generate the cage-appended formate species, [K(18-c-6)]2[Ph/CyCb-HCO2]. In contrast, the nido compound, [K(18-c-6)]2[tBu/C6F5Cb], weakly captured CO2 to generate the species [K(18-c-6)]2[tBu/C6F5Cb-CO2], wherein CO2 capture was thought to occur between the P and K+ centers. This was structurally confirmed by performing the reaction with added Li+ to generate the strongly activated P-C(O)O-Li species, [Li]1.5[K]0.5[tBu/C6F5Cb-CO2]. This also provided an avenue to tune CO2 binding constants by controlling the addition of added alkali cations to the solution. Using the encapsulated nido species, [K(kryp)]2[tBu/C6F5Cb] (kryp = kryptofix 2,2,2), binding constants (K) were calculated upon the addition of 1 equiv of [M][TFSI] (M = Li, Na, K; TFSI = bis(trifluoromethanesulfonyl)imide) and resulted in log K values of: 5.5 (Li+), 4.5 (Na+), and 3.4 (K+). Binding constants with >1.0 equiv. M+ were qualitatively similar, whereas lower values were observed with +. Chemical oxidation of the CO2-captured products also led to CO2 release. Together, these results open avenues to redox-controlled CO2 capture/release coupled with tunable CO2 capture binding constants, significant areas of interest in carbon capture technologies.


  • Computer Simulations of Zeolite Formation

    by Siddharth Sonti, Ambarish R. Kulkarni

  • Open Access

    Dual Chemical Looping/Catalytic Process for Alkylation of Benzene With Ethane and Propane Yielding Ethylbenzene and Cumene Over Copper‐Containing Mordenite

    by Florent J. Dubray, Yu‐Hsun Wang, Mikalai A. Artsiusheuski, Jiawei Guo, Rene Verel, Ambarish Kulkarni, Jeroen A. van Bokhoven, Vitaly L. Sushkevich

    Given the sustained demand for alkylated aromatics and the strained olefin market, there is an urgent need to develop efficient one‐step processes for the direct alkylation of aromatics using alkanes instead of olefins. Such technologies offer greater energy efficiency and sustainability by eliminating the need for separate, energy‐intensive alkane dehydrogenation steps. In this work, we report a dual chemical looping / catalytic process that couples alkane dehydrogenation with aromatic alkylation over a copper‐containing mordenite yielding up to 25% of alkylated aromatics with >97% selectivity per cycle. In situ MAS NMR and FTIR spectroscopies combined with DFT calculations showed that the alkylation of benzene with alkanes proceeds via a π‐bounded Cu(I)‐olefin intermediate, which subsequently interacts with benzene, catalyzed by Brønsted acid sites, leading to alkylated products that readily desorb from the active material into the gas phase. DFT calculations show that alkylation mediated solely by Cu(I) has prohibitively high barriers (>1.8 eV), whereas a bi‐functional pathway involving both Cu(I) and Brønsted acid sites can proceed with significantly lower barrier (0.8 eV) through a concerted C–C bond formation and proton transfer step.


  • An Approach to Electrochemically-Mediated Air Separation Using Co Salen Complexes

    by Isabella Caruso, Ute Luisa Petri, Saurabh Pattabiraman Sivakumar, Jenny Y Yang, Ambarish Kulkarni, Robert M. Darling, Fikile R. Brushett

    Biomass gasification for fuel production is a lower-carbon alternative as compared to the use of fossil resources. In biomass gasification, organic material is converted to gases including hydrogen, carbon monoxide, and carbon dioxide. This process has lower net carbon emissions than combusting fossil fuels because the plants used for fuel uptake carbon dioxide while they are growing. However, biomass gasification faces several technical challenges to widespread implementation, including the need for a pure oxygen stream for optimal gasification. 1 Cryogenic distillation is a common method of producing pure oxygen from air at a higher efficiency than other technologies, but its energy requirements are significant and it is most efficient at very large production volumes. 2 As a result, there is motivation for an energy-efficient method of producing oxygen in systems better suited for lower production volumes. In this presentation, we describe an electro-swing approach for oxygen sorption based on Co(II)-salen complexes. Their known affinity towards oxygen, which reduces upon oxidation to the respective Co(III) adduct, allows selective binding of oxygen from air and potential release into a pure oxygen stream. There has previously been limited investigation into electrochemically-triggered release of oxygen through the application of a positive potential. 3 We first characterize several Co(salen) complexes and associated electrolyte solutions via cyclic voltammetry and chronoamperometry. We then investigate the conditions required to trigger release of oxygen from the oxidized complex. Finally, we demonstrate use of Co(salen) complexes in a 2-stage electrochemical cell, in which oxygen binding and release occur at the electrodes where oxidation and reduction of the Co(salen) complex take place. Overall, this work provides a proof-of-concept for a new oxygen separation strategy that can be further assessed and optimized in the future. Acknowledgements: This research was funded by the U.S. Department of Energy’s Office of Fossil Energy under award number FE0032348. References: National Energy Technology Laboratory. (n.d.). 3.2 Biomass. Gasifipedia. https://netl.doe.gov/research/coal/energy-systems/gasification/gasifipedia/biomass Q. Xiong, P. Luo and B. Hua, "Energy consumption analysis of air separation process for oxy-fuel combustion system," Adv. Mater. Res., vol. 1033–1034, p. 146, 2014. Cameron, James H., and Steven C. Turner. "Electrochemically controlled dissociation of dioxygen from a µ-peroxo cobalt (III) dimer." Journal of the Chemical Society, Dalton Transactions 23 (1992): 3285-3289.

  • Modeling Diffusion in Metal–Organic Frameworks Using On-the-fly Probability Enhanced Sampling-Based Machine Learning Potentials

    by Sudheesh Kumar Ethirajan, Ambarish R. Kulkarni

    Machine learning potentials (MLPs) can help bridge the length- and time-scale gaps required to study diverse physicochemical phenomena in nanoporous materials with ab initio accuracy. These MLPs are typically trained on quantum chemical data obtained from traditional molecular dynamics (MD) simulations that predominantly sample near-equilibrium configurations. This often limits the model's ability to describe high-energy, off-equilibrium states required to study rare events. To address this capability gap, we introduce a novel active learning curriculum using the On-the-fly Probability Enhanced Sampling (OPES) method. Using imidazole diffusion in the SALEM-2 metal-organic framework (MOF) as a prototypical example, we apply time-dependent OPES biases with temperature- and distance-based collective variables to systematically sample the most relevant regions of the potential energy surface. This strategy enables nanosecond-scale MD simulations with near-DFT accuracy, capturing both the expected diffusion pathway across the 6-membered window and a previously unreported ring-opening mechanism through the more constrained 4-membered window. The latter process, which involves the transient dissociation of a Zn-N bond, cannot be captured using classical force fields and is prohibitively expensive with DFT. Thus, this study highlights how enhanced sampling methods can overcome data scarcity challenges associated with training MLPs for studying rare events in nanoporous materials.


  • Open Access

    Modeling Diffusion in Metal-Organic Frameworks using On-the-fly Probability Enhanced Sampling-based Machine Learning Potentials

    by Sudheesh Kumar Ethirajan, Ambarish R. Kulkarni

    Machine learning potentials (MLPs) can help bridge the length- and time-scale gaps required to study diverse physicochemical phenomena in nanoporous materials with ab initio accuracy. These MLPs are typically trained on quantum chemical data obtained from traditional molecular dynamics (MD) simulations that predominantly sample near-equilibrium configurations. This often limits the model’s ability to describe high-energy, off-equilibrium states required to study rare events. To address this capability gap, we introduce a novel active learning curriculum using the On-the-fly Probability Enhanced Sampling (OPES) method. Using imidazole diffusion in the SALEM-2 metal-organic framework (MOF) as a prototypical example, we apply time-dependent OPES biases with temperature- and distance-based collective variables to systematically sample the most relevant regions of the potential energy surface. This strategy enables nanosecond-scale MD simulations with near-DFT accuracy, capturing both the expected diffusion pathway across the 6-membered window and a previously unreported ring-opening mechanism through the more constrained 4-membered window. The latter process, which involves the transient dissociation of a Zn–N bond, cannot be captured using classical force fields and is prohibitively expensive with DFT. Thus, this study highlights how enhanced sampling methods can overcome data scarcity challenges associated with training MLPs for studying rare events in nanoporous materials.

  • Open Access

    Computer Simulations of Zeolite Formation

    by Siddharth Sonti, Ambarish R. Kulkarni

    Zeolites are functional nanoporous materials that are central to catalysis, separations, and several other energy-relevant technologies. Yet, despite hundreds of predicted frameworks, only a small fraction of these materials are reproducibly synthesized and used industrially. In part, this gap arises due to the complex interplay of many different phenomena that occur during nucleation, oligomerization, phase change, and crystal growth. To contextualize the progress made over the last few decades, this review explores seminal accomplishments spanning early quantum chemical and molecular dynamics studies to more recent examples using Monte Carlo methods, coarse-grained simulations, and enhanced sampling algorithms. These retrospective insights allow us to identify unresolved scientific questions, long-standing computational bottlenecks, and potential opportunities within this domain. In particular, we highlight five pressing challenges for the zeolite modeling community. These are: (1) shifting from method-driven to application-focused mindset; (2) building cost-efficient reactive force fields and/or machine-learning potentials for describing dynamic multicomponent systems; (3) expanding the use of rare-event and enhanced sampling methods; (4) integrating simulations with experiments for quantitative predictions; and (5) fostering interdisciplinary collaboration through shared data and open benchmarks. We anticipate that meeting these challenges will enable the rational, scalable synthesis of “designer” zeolites, which, ultimately, will transform our shared energy and chemicals infrastructure.

  • Open Access

    Electronic and Geometric Contributors to Hydrogen Binding in Uranium Oxide Grain Boundaries

    by Rajat Goel, Nir Goldman, Ambarish R. Kulkarni

    Hydrogen induced corrosion of uranium, which leads to the formation of toxic and pyrophoric UH3, raises significant safety concerns for long-term storage of nuclear materials. Previous work suggests hydrogen diffuses through the grain boundaries (GBs) of the passivating oxide layer to initiate hydriding reactions. However, the atomistic mechanisms underlying this phenomenon and the structural factors that control its initiation are not well understood. To address this knowledge gap, here we use a high-throughput density functional theory (DFT) workflow to investigate the adsorption of H and H2 in the defective bulk UO2. Specifically, we have exhaustively investigated the adsorption of H (107 sites) and H2 (26 sites) in three different coincident site lattice (CSL) GBs: Σ3, Σ5, and Σ9. Compared to the binding energies in pristine UO2, we observe significantly stronger hydrogen adsorption at these GB sites. Interestingly, we find that the trends in H and H2 adsorption vary considerably across the three GB models. In particular, while a small number of sites in Σ5 and Σ9 show exothermic adsorption of H and H2, respectively, no such sites are found in Σ3. These results provide fundamental atomistic insights that could guide the development of future corrosion mitigation strategies for the storage of nuclear materials.


  • Open Access

    Understanding cation and surface charging effects at electrified interfaces using neural network interatomic potentials

    by Jiawei Guo, Marcos Calegari Andrade, Christopher Hahn, Ambarish Kulkarni, Nitish Govindarajan

    Electrified interfaces are at the heart of electrochemical processes related to several technologically important applications, yet they remain poorly understood. This lack of understanding is primarily due to their complex and dynamic nature, that poses significant challenges in developing realistic models. To overcome some of these challenges, we train message-passing neural network interatomic potentials based on the MACE architecture to perform long time-scale molecular dynamics (MD) simulations (O(ns)) of electrified Au interfaces with near-first-principles accuracy. Specifically, we study the impact of surface charging and cation identity (Li+, Na+, K+, Cs+) to obtain detailed insights into various interfacial properties, including the structure and dynamics of (near surface) water molecules, cations, and the double layer capacitance. In general, we find that surface charging has a greater impact on these interfacial properties compared to that of the cation identity. Furthermore, we find that the estimated double layer capacitance from MACE/MD simulations (17-19 muF/cm2) at cathodic potentials is largely insensitive to the cation identity. Our work demonstrates the potential of message passing neural network potentials to obtain a detailed atomistic-level understanding of electrified interfaces.