K. G. Sagar
Research Subjects
K. G. Sagar has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
P. M. Suresh
Mechanical Engineering Department, Jain Deemed-To-Be University, Ramnagara District, India
4 shared publications- P. M. Suresh
Mechanical Engineering, ACS College of Engineering, Visvesvaraya Technological University, Belagavi, Karnataka, India
2 shared publications P. Sampathkumaran
2 shared publicationsACS College of Engineering
1 shared publicationBharath K. Devendra
MS Ramaiah Coll Arts Sci & Commerce, Dept Chem, MSR Nagar,MSRIT Post, Bengaluru 560054, India
1 shared publication- Bincy Rose Vergis
BMS Inst Technol & Management, Dept Chem, Bengaluru 560064, India
1 shared publication
Latest Publications
- Open Access
- 21 December 2024
- Published by Elsevier in Results in Surfaces and Interfaces
- Vol. 18
Electrochemical corrosion influencing the Al beryl alloy system subjected to extrusion process
- 21 December 2024
- Published by Elsevier in Results in Surfaces and Interfaces
- Vol. 18
Open AccessElectrochemical corrosion influencing the Al beryl alloy system subjected to extrusion process
- 6 November 2024
- Published by Springer Nature in Journal of The Institution of Engineers (India): Series C
- Vol. 105 (6) , 1429-1442
Extrusion Process Influencing Mechanical, Tribological Properties of Aluminum Beryl Composites
- 6 November 2024
- Published by Springer Nature in Journal of The Institution of Engineers (India): Series C
- Vol. 105 (6) , 1429-1442
Extrusion Process Influencing Mechanical, Tribological Properties of Aluminum Beryl Composites
- Open Access
- 2 February 2024
- Published by Qeios Ltd
System and Method for One or More Extruders Using a Robotic Arms to Print a 3D Model
The need for creating realistic body parts and anatomical models using additive printing was long ago recognised. The paper "Rapid prototyping approaches for anatomical modelling in medicine" by M. McGurk et al. in Ann. R. Coll. Surg. Engl. 1997; 79; 169-174, which discussed 3-D printing of models, summarised the state of the art in this subject some years ago. Models were made by sprinkling liquid over a layer of precursor powder using inkjet printer nozzles to form a solid, thin slice. For each additional slice, the printing procedure was repeated until the item was finished as a "green state" component, which was then burned in a furnace to sinter it. The product was then subjected to further processing to create a full density portion. Large item 3D printing has been simpler than in previous years because to the development of software for computer controlled robotic XY motion systems used in the semiconductor and optical sectors. Layered building of 3D things is now a comparatively cheap and quick operation for 3D printing equipment thanks to software applications like SolidWorks, AutoCAD 360, and similar software products. Larger things may be 3D printed by either attaching rails above the print nozzles for X-Y motion directed from above the nozzles, or by positioning the object to be created on an X-Y table with motion supplied below the nozzles. The current work attempts to construct a 3D printing setup that utilises two robotic arms to print a single component. Here, the bed will be swivelled to a specific angle to prevent the robotic arms from becoming entangled, and the robotic arms will also move 180 degrees from their mean positions. Additionally, the related software will be developed locally in our lab, resulting in a shorter printing time and higher level of accuracy.
- 2 February 2024
- Published by Qeios Ltd
Open AccessSystem and Method for One or More Extruders Using a Robotic Arms to Print a 3D Model
The need for creating realistic body parts and anatomical models using additive printing was long ago recognised. The paper "Rapid prototyping approaches for anatomical modelling in medicine" by M. McGurk et al. in Ann. R. Coll. Surg. Engl. 1997; 79; 169-174, which discussed 3-D printing of models, summarised the state of the art in this subject some years ago. Models were made by sprinkling liquid over a layer of precursor powder using inkjet printer nozzles to form a solid, thin slice. For each additional slice, the printing procedure was repeated until the item was finished as a "green state" component, which was then burned in a furnace to sinter it. The product was then subjected to further processing to create a full density portion. Large item 3D printing has been simpler than in previous years because to the development of software for computer controlled robotic XY motion systems used in the semiconductor and optical sectors. Layered building of 3D things is now a comparatively cheap and quick operation for 3D printing equipment thanks to software applications like SolidWorks, AutoCAD 360, and similar software products. Larger things may be 3D printed by either attaching rails above the print nozzles for X-Y motion directed from above the nozzles, or by positioning the object to be created on an X-Y table with motion supplied below the nozzles. The current work attempts to construct a 3D printing setup that utilises two robotic arms to print a single component. Here, the bed will be swivelled to a specific angle to prevent the robotic arms from becoming entangled, and the robotic arms will also move 180 degrees from their mean positions. Additionally, the related software will be developed locally in our lab, resulting in a shorter printing time and higher level of accuracy.
- Open Access
- 21 December 2023
- Published by Bilingual Publishing Group in Journal of Metallic Material Research
- Vol. 7 (1) , 1-13
Photopolymer-metal Composites Based on Metal Foil Deposition on Additive Manufactured Substrates: An Overview
Photopolymer materials are a type of polymer material that can undergo chemical reactions when exposed to light of a specific wavelength or intensity. Liquid photopolymers are used in applications such as 3D printing, where they are deposited layer by layer and cured by exposure to light. Solid photopolymers, also known as photoresists, are used in applications such as lithography and microfabrication, where they are applied as a thin film and selectively exposed to light to create a pattern. The properties of photopolymer materials, such as mechanical strength, thermal stability, and chemical resistance, can be tailored by adjusting the monomer type, photo initiator type, and processing parameters such as the exposure time and intensity. Overall, photopolymer materials are a versatile and widely used type of polymer material that can be tailored for specific applications through the choice of monomer, photo initiator, and processing parameters. Photopolymer-metal composites based on metal foil deposition on additive manufactured substrates are a technique for creating composite materials with a combination of metal and polymer properties. This approach involves the deposition of a thin layer of metal foil onto a 3D printed polymer substrate, which is then cured using photopolymerization to create a composite material with unique properties.
- 21 December 2023
- Published by Bilingual Publishing Group in Journal of Metallic Material Research
- Vol. 7 (1) , 1-13
Open AccessPhotopolymer-metal Composites Based on Metal Foil Deposition on Additive Manufactured Substrates: An Overview
Photopolymer materials are a type of polymer material that can undergo chemical reactions when exposed to light of a specific wavelength or intensity. Liquid photopolymers are used in applications such as 3D printing, where they are deposited layer by layer and cured by exposure to light. Solid photopolymers, also known as photoresists, are used in applications such as lithography and microfabrication, where they are applied as a thin film and selectively exposed to light to create a pattern. The properties of photopolymer materials, such as mechanical strength, thermal stability, and chemical resistance, can be tailored by adjusting the monomer type, photo initiator type, and processing parameters such as the exposure time and intensity. Overall, photopolymer materials are a versatile and widely used type of polymer material that can be tailored for specific applications through the choice of monomer, photo initiator, and processing parameters. Photopolymer-metal composites based on metal foil deposition on additive manufactured substrates are a technique for creating composite materials with a combination of metal and polymer properties. This approach involves the deposition of a thin layer of metal foil onto a 3D printed polymer substrate, which is then cured using photopolymerization to create a composite material with unique properties.
- Open Access
- 31 August 2023
- Published by Bilingual Publishing Group in Journal of Metallic Material Research
- Vol. 6 (2) , 2-9
Significant Difficulties in Achieving Equal Channel Angular Pressing in Aluminum Metal Matrix Composites
The technique known as Equal Channel Angular Pressing (ECAP) has gained prominence as a transformational method for improving the mechanical characteristics of metals and alloys by subjecting them to intense plastic deformation. This study explores the significant difficulties that arise when using Equal Channel Angular Pressing (ECAP) on Aluminium 2024-Beryl Metal Matrix Composites (2024-BMMCs), providing a detailed analysis of the complex interaction between the reinforcement particles and the aluminium matrix. This work aims to provide a thorough examination of the challenges, root causes, and possible approaches to address the issue of producing consistent deformation in 2024-BMMCs using ECAP. By doing so, this research contributes to a better understanding of the intricate nature of this process.
- 31 August 2023
- Published by Bilingual Publishing Group in Journal of Metallic Material Research
- Vol. 6 (2) , 2-9
Open AccessSignificant Difficulties in Achieving Equal Channel Angular Pressing in Aluminum Metal Matrix Composites
The technique known as Equal Channel Angular Pressing (ECAP) has gained prominence as a transformational method for improving the mechanical characteristics of metals and alloys by subjecting them to intense plastic deformation. This study explores the significant difficulties that arise when using Equal Channel Angular Pressing (ECAP) on Aluminium 2024-Beryl Metal Matrix Composites (2024-BMMCs), providing a detailed analysis of the complex interaction between the reinforcement particles and the aluminium matrix. This work aims to provide a thorough examination of the challenges, root causes, and possible approaches to address the issue of producing consistent deformation in 2024-BMMCs using ECAP. By doing so, this research contributes to a better understanding of the intricate nature of this process.
- 1 August 2023
- Published by Springer Nature
- p. 79-87
Nano-Severe Plastic Deformation Process on Aluminum Alloy and Composites: An Overview
- 1 August 2023
- Published by Springer Nature
- p. 79-87
Nano-Severe Plastic Deformation Process on Aluminum Alloy and Composites: An Overview
- Open Access
- 2 May 2023
- Published by Springer Nature in Research Square
Effect of Severe Plastic Deformation Involving Ecap of Aluminum 2024 Alloy Beryl Composites on the Mechanical Properties
The adoption of Aluminum Metal Matrix composites has gained popularity and widespread application in view of their light weight and superior mechanical strength compared to the un-reinforced alloy system. Much improved characteristics have been derived based on the adoption of secondary processes such as rolling, forming, drawing and plastic deformation. In this context, the preparation of Al2024 alloy, containing Beryl particles as reinforcement is envisaged for getting better properties in terms of strength and hardness for structural use in aerospace industry. Further enhancement in properties to strengthen the alloy may be possible by subjecting it to severe plastic deformation, especially Equal Channel Angular Pressing (ECAP) process. The present work focuses on developing Al 2024 alloy composites containing Beryl particles at 6 wt.%, through stir cast method. This is followed by ECAP process carried out in the annealed condition. This facility has been designed and developed in house. Following this, the mechanical properties, involving tensile strength, % elongation & hardness have been evaluated for the ECAP processed Al2024 Beryl samples and the values thus obtained are compared with those derived on samples without Beryl additions. The microstructures of the samples, for key stages of the work, have been recorded. Further, the fracture morphology of ECAP processed samples have been examined and analyzed using SEM/EDAX and correlated with the tensile strength data. The ECAP with pass II processed samples have shown higher tensile strength and hardness as well as good grain refinement in the matrix compared to annealed Al alloy sample.
- 2 May 2023
- Published by Springer Nature in Research Square
Open AccessEffect of Severe Plastic Deformation Involving Ecap of Aluminum 2024 Alloy Beryl Composites on the Mechanical Properties
The adoption of Aluminum Metal Matrix composites has gained popularity and widespread application in view of their light weight and superior mechanical strength compared to the un-reinforced alloy system. Much improved characteristics have been derived based on the adoption of secondary processes such as rolling, forming, drawing and plastic deformation. In this context, the preparation of Al2024 alloy, containing Beryl particles as reinforcement is envisaged for getting better properties in terms of strength and hardness for structural use in aerospace industry. Further enhancement in properties to strengthen the alloy may be possible by subjecting it to severe plastic deformation, especially Equal Channel Angular Pressing (ECAP) process. The present work focuses on developing Al 2024 alloy composites containing Beryl particles at 6 wt.%, through stir cast method. This is followed by ECAP process carried out in the annealed condition. This facility has been designed and developed in house. Following this, the mechanical properties, involving tensile strength, % elongation & hardness have been evaluated for the ECAP processed Al2024 Beryl samples and the values thus obtained are compared with those derived on samples without Beryl additions. The microstructures of the samples, for key stages of the work, have been recorded. Further, the fracture morphology of ECAP processed samples have been examined and analyzed using SEM/EDAX and correlated with the tensile strength data. The ECAP with pass II processed samples have shown higher tensile strength and hardness as well as good grain refinement in the matrix compared to annealed Al alloy sample.
- Open Access
- 11 July 2022
- Published by Hindawi Limited in Advances in Materials Science and Engineering
- Vol. 2022, 1-10
Improving Sustainability of EDM Sector by Implementing Unconventional Competitive Manufacturing Approach
In this research work, an attempt was made to machine the titanium (Ti6Al4V) alloy utilizing electric discharge machining technique. The distinct process parameters and its impact on the machining performance were identified using the cause-and-effect diagram (CED). The key process parameters identified by CED diagram were current, pulse on time (Ton), aluminium oxide (Al2O3) powder concentration, and gap distance; experiments were conducted by varying the process parameters, experimental runs were designed using the Taguchi mixed orthogonal array. The experimental results revealed that improvement in material removal rate (MRR) was due to the bridging effect; reduction in tool wear rate (TWR) owing to the expansion of spark gap and enhancement in the surface roughness (Ra) was due to the complete flushing of machined debris. The interaction impact was analysed using the contour plot and with the aid of mathematical modelling experimental fits that were identified and the results were validated utilizing the sensitivity analysis. The obtained results were optimized using the technique for order of preference by similarity to ideal solution (TOPSIS) optimization technique.
- 11 July 2022
- Published by Hindawi Limited in Advances in Materials Science and Engineering
- Vol. 2022, 1-10
Open AccessImproving Sustainability of EDM Sector by Implementing Unconventional Competitive Manufacturing Approach
In this research work, an attempt was made to machine the titanium (Ti6Al4V) alloy utilizing electric discharge machining technique. The distinct process parameters and its impact on the machining performance were identified using the cause-and-effect diagram (CED). The key process parameters identified by CED diagram were current, pulse on time (Ton), aluminium oxide (Al2O3) powder concentration, and gap distance; experiments were conducted by varying the process parameters, experimental runs were designed using the Taguchi mixed orthogonal array. The experimental results revealed that improvement in material removal rate (MRR) was due to the bridging effect; reduction in tool wear rate (TWR) owing to the expansion of spark gap and enhancement in the surface roughness (Ra) was due to the complete flushing of machined debris. The interaction impact was analysed using the contour plot and with the aid of mathematical modelling experimental fits that were identified and the results were validated utilizing the sensitivity analysis. The obtained results were optimized using the technique for order of preference by similarity to ideal solution (TOPSIS) optimization technique.
- 19 October 2020
- Published by Springer Nature in Journal of The Institution of Engineers (India): Series C
- Vol. 102 (1) , 27-39
Addition of Beryl Content to Aluminum 2024 Alloy Influencing the Slide Wear and Friction Characteristics
- 19 October 2020
- Published by Springer Nature in Journal of The Institution of Engineers (India): Series C
- Vol. 102 (1) , 27-39
Addition of Beryl Content to Aluminum 2024 Alloy Influencing the Slide Wear and Friction Characteristics