MBMaike Becker

Maike Becker

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Maike Becker has a total of 63 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Mechanical and electrochemical corrosion properties of stochastic open-cell Al-, Ni/Al- and Ni/PU foams

    by Markus Felten, Michael Fries, Francesco Kunz, Mahan Firoozbakht, Florian Schäfer, Christian Motz, Maike Becker, Alexander Lutz, Daniela Zander, Anne Jung

  • Open Access

    LA-ICP-ToF-MS elemental imaging reveals lithium partitioning into spinel in battery recycling slags

    by Mathias Schannor, Maike Becker, Florian Kargl, Thomas Schirmer, Heike Traub, Christian Adam

    The recovery of lithium from pyrometallurgical battery recycling slags depends on its distribution among solidifying mineral phases.

  • Open Access

    In-situ X-ray monitoring of solidification and related processes of metal alloys

    by G. Reinhart, D. J. Browne, F. Kargl, F. García-Moreno, M. Becker, E. Sondermann, K. Binder, J. S. Mullen, G. Zimmermann, R. H. Mathiesen, et al.

    X-ray radioscopy enables the in-situ monitoring of metal alloy processes and then gives access to crucial information on the dynamics of the underlying phenomena. In the last decade, the utilisation of this powerful imaging technique has been adapted to microgravity platforms such as sounding rockets and parabolic flights. The combination of microgravity experimentation with X-ray radioscopy has resulted in a leap in the understanding of fundamental science and has opened new paths in the fields of materials science. The present review focuses on the short history of this research, which includes facility developments, microgravity experiments and results obtained by partners of the XRMON (In-situ X-Ray MONitoring of advanced metallurgical processes under microgravity and terrestrial conditions) research project in the framework of the MAP (Microgravity Application Promotion) programme of the European Space Agency. Three illustrative research topics that were advanced significantly through the use of X-ray radioscopy will be detailed: solidification of metal alloys, metallic foam formation and diffusion in melts.


  • Open Access

    Nucleation and Growth Dynamics of Equiaxed Dendrites in Thin Metallic Al–Cu and Al–Ge Samples in Microgravity and on Earth

    by Maike Becker, Mareike Wegener, Jörg Drescher, Florian Kargl

    In this study, the nucleation and growth characteristics of equiaxed dendrites in near-isothermal solidification experiments, performed during two sounding rocket missions, MAPHEUS-6 and 7, are investigated. Two samples of the composition Al–15 wt pct Cu and one sample of the composition Al–46 wt pct Ge were processed in microgravity and several samples on ground. In situ X-radiography was performed to observe the nucleation dynamics and microstructure evolution during solidification of the 200 µm thin, disc-shaped samples. The measured dendritic growth rates and observed concentration distributions in the liquid indicate no difference between microgravity and on-ground horizontal experiments, in line with previous observations. On the contrary, a difference in the nucleation behavior was found. In all microgravity experiments bursts of nucleation were observed, which is different from comparable on-ground solidification experiments, where the nucleation occurs continuously. The combined analyses suggest that small variations of the concentration fields that probably originate from convective flow and buoyancy of the grains in the on-ground experiments, lead to a spatially variable nucleation undercooling distribution and hence to continuous nucleation. In contrast, the absence of convective flow in microgravity results in a more uniform nucleation undercooling distribution. The grains therefore nucleate in bursts at the surface walls, when the necessary nucleation undercooling is reached.


  • Isothermal furnace for long-term in situ and real-time X-radiography solidification experiments

    by M. Wegener, C. Dreißigacker, M. Becker, F. Kargl

    A new x-ray isothermal furnace has been developed, suitable for in situ observations of semi-solid processes including the transition from dendritic to globulitic grain morphology and grain coarsening in metallic samples. A homogeneous, isothermal temperature field is achieved using a novel heater concept. The furnace structure is sandwich-like with heating elements positioned in the beam line and parallel to the sample. Planar heat transfer to the sample enables measurements with low cooling rates and a minimized temperature gradient. Cooling rates from 0.1 to 15 K min−1 can be controlled in the temperature range 1170–670 K. The furnace setup is integrable in the existing rotatable laboratory x-ray facility (X-RISE) at the German Aerospace Center (DLR). In this setup, an effective pixel size of 3 μm and a field of view of 8 mm in diameter can be achieved. Preliminary solidification and semi-solid experiments in the hypo-eutectic alloy systems Al–Ge and Al–Cu, inoculated with Al–5Ti–1B grain refiner, are presented. They indicate a very uniform temperature distribution in the sample.


  • Open Access

    In situ observation of the impact of hydrogen bubbles in Al–Cu melt on directional dendritic solidification

    by T. Werner, M. Becker, J. Baumann, C. Pickmann, L. Sturz, F. Kargl

    Much research has already been focused on the solid-bubble interaction in the interdendritic space for solidifying materials. However, commonly, bubble nucleation is not limited to the mushy zone but also occurs in the liquid melt. In the present research on an Al- $$10 \, \%\mathrm {wt. \,}$$ 10 % wt . Cu alloy, the interaction between these bubbles and the approaching solidification front becomes apparent under in situ X-radiography and allows for new insights into the influence of bubbles on the solidifying microstructure. The observed effects comprise bulging of the solidification front toward the bubble, bending of dendrites in front of the bubble, coronal outgrowths surrounding the bubbles, as well as bubble growth, bubble pushing, and bubble eruption. It is found that for the present Al–Cu alloy, the local variation in the solidification speed can be attributed to the bubbles’ insulating properties. The range of this effect was observed to be up to $$900 \,\upmu \text {m}$$ 900 μ m , depending on the bubble diameter, locally increasing solidification speed by up to $$350 \, \%$$ 350 % . The influences of Marangoni vortices and coronal nucleation of misoriented dendrites around bubbles on the homogeneity of the microstructure are discussed. A comparison with experiments on model alloys and simulations from various other studies highlights the similarities and differences to this metallic alloy system.


  • Open Access

    X-ray Based in Situ Investigation of Silicon Growth Mechanism Dynamics—Application to Grain and Defect Formation

    by Hadjer Ouaddah, Maike Becker, Thècle Riberi-Béridot, Maria Tsoutsouva, Vasiliki Stamelou, Gabrielle Regula, Guillaume Reinhart, Isabelle Périchaud, Fabrice Guittonneau, Laurent Barrallier, et al.

    To control the final grain structure and the density of structural crystalline defects in silicon (Si) ingots is still a main issue for Si used in photovoltaic solar cells. It concerns both innovative and conventional fabrication processes. Due to the dynamic essence of the phenomena and to the coupling of mechanisms at different scales, the post-mortem study of the solidified ingots gives limited results. In the past years, we developed an original system named GaTSBI for Growth at high Temperature observed by Synchrotron Beam Imaging, to investigate in situ the mechanisms involved during solidification. X-ray radiography and X-ray Bragg diffraction imaging (topography) are combined and implemented together with the running of a high temperature (up to 2073 K) solidification furnace. The experiments are conducted at the European Synchrotron Radiation Facility (ESRF). Both imaging techniques provide in situ and real time information during growth on the morphology and kinetics of the solid/liquid (S/L) interface, as well as on the deformation of the crystal structure and on the dynamics of structural defects including dislocations. Essential features of twinning, grain nucleation, competition, strain building, and dislocations during Si solidification are characterized and allow a deeper understanding of the fundamental mechanisms of its growth.


  • XRISE-M: X-radiography facility for solidification and diffusion studies of alloys aboard sounding rockets

    by F. Kargl, J. Drescher, C. Dreißigacker, M. Balter, M. Becker, M. Wegener, E. Sondermann

    A compact fully protected microfocus X-radiography facility (XRISE-M) is presented for the study of microstructure evolution during the solidification of thin liquid alloy samples and chemical diffusion in liquid binary alloys in situ and in real-time aboard a sounding rocket. XRISE-M presently enables the simultaneous processing of either two near-isothermal solidification furnaces or a combination of a linear-shear cell diffusion furnace and a near-isothermal solidification furnace. For optimal detector calibration shortly before flight, the furnaces can be rotated around the central beam axis and calibration images can be recorded. The facility allows preheating the samples into the liquid state prior to lift-off without leakage during the ascent phase at accelerations of up to 27 g. Macrosegregation on remelting of thin metal samples for microstructure evolution investigations is prevented by an inclinable furnace metric. The use of ion-getter pumps for vacuum generation enables us to exploit the entire available time of reduced gravity for image recording and data acquisition. With the device and currently available sample environments, microstructure formation upon solidification and chemical diffusion under purely diffusive conditions in alloys can be investigated. The facility can be used equally for other investigations such as granular matter dynamics or metal foaming, provided that suitable experiment inserts are developed in the future.


  • Open Access

    Simultaneous X-ray radiography and diffraction topography imaging applied to silicon for defect analysis during melting and crystallization

    by Maike Becker, Gabrielle Regula, Guillaume Reinhart, Elodie Boller, Jean-Paul Valade, Alexander Rack, Paul Tafforeau, Nathalie Mangelinck-Noël

    One of the key issues to be resolved to improve the performance of silicon solar cells is to reduce crystalline defect formation and propagation during the growth-process fabrication step. For this purpose, the generation of structural defects such as grain boundaries and dislocations in silicon must be understood and characterized. Here, in situ X-ray diffraction imaging, historically named topography, is combined with radiography imaging to analyse the development of crystal defects before, during and after crystallization. Two individual indirect detector systems are implemented to record simultaneously the crystal structure (topographs) and the solid–liquid morphology evolution (radiographs) at high temperature. This allows for a complete synchronization of the images and for an increased image acquisition rate compared with previous studies that used X-ray sensitive films to record the topographs. The experiments are performed with X-ray synchrotron radiation at beamline ID19 at the European Synchrotron Radiation Facility. In situ observations of the heating, melting, solidification and holding stages of silicon samples are presented, to demonstrate that with the upgraded setup detailed investigations of time-dependent phenomena are now possible. The motion of dislocations is recorded throughout the experiment, so that their interaction with grain boundaries and their multiplication through the activation of Frank–Read sources can be observed. Moreover, the capability to record with two camera-based detectors allows for the study of the relationship between strain distribution, twinning and nucleation events. In conclusion, the simultaneous recording of topographs and radiographs has great potential for further detailed investigations of the interaction and generation of grains and defects that influence the growth process and the final crystalline structure in silicon and other crystalline materials.


  • Dendrite orientation transition in Al Ge alloys

    by M. Becker, J.A. Dantzig, M. Kolbe, S.T. Wiese, F. Kargl