Alexey S. Gavrikov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Alexey S. Gavrikov has a total of 66 co-authors. Here are the top co-authors by number of shared publications:
- Alexander S. Mishin
Shemyakin-Ovchinnikov Institute of Bioorganic Chemistry, Russian Academy of Sciences, Moscow, Russia
13 shared publications - Mikhail S. Baranov
Laboratory of Medicinal Substances Chemistry, Institute of Translational Medicine, Pirogov Russian National Research Medical University, Ostrovitianova 1, Moscow 117513, Russia
7 shared publications - Nina G. Bozhanova
Department of Chemistry, Center for Structural Biology, Vanderbilt University
7 shared publications - Konstantin A. Lukyanov
Shemyakin Ovchinnikov Inst Bioorgan Chem, Miklukho Maklaya 16-10, Moscow 117997, Russia
5 shared publications - Maxim M. Perfilov
Shemyakin-Ovchinnikov Institute of Bioorganic Chemistry, Russian Academy of Sciences, Moscow, Russia
3 shared publications - Alexey M. Bogdanov
Department of Photonics Izmir Institute of Technology Izmir Türkiye
2 shared publications
Latest Publications
- Open Access
- 23 October 2026
- Published by Springer Nature in Nature Plants
- Vol. 12 (11) , 2165-2171
Metabolically robust ratiometric autoluminescent reporters
Self-sustained luminescence enables non-invasive monitoring of molecular events at the whole-organism level, but its intensity depends on both gene expression and cellular metabolism, limiting quantitative interpretation. Here we present an approach that disentangles the contributions of gene expression and metabolism. By co-expressing an engineered reference luciferase variant that uses the same substrate but emits light at a different wavelength and monitoring the colour ratio, we substantially reduced signal variability, enabling quantitative physiological imaging despite changes in metabolic activity.
- 23 October 2026
- Published by Springer Nature in Nature Plants
- Vol. 12 (11) , 2165-2171
Open AccessMetabolically robust ratiometric autoluminescent reporters
Self-sustained luminescence enables non-invasive monitoring of molecular events at the whole-organism level, but its intensity depends on both gene expression and cellular metabolism, limiting quantitative interpretation. Here we present an approach that disentangles the contributions of gene expression and metabolism. By co-expressing an engineered reference luciferase variant that uses the same substrate but emits light at a different wavelength and monitoring the colour ratio, we substantially reduced signal variability, enabling quantitative physiological imaging despite changes in metabolic activity.
- Open Access
The two key substitutions in the chromophore environment of mKate2 to produce an enhanced FusionRed-like red fluorescent protein
Red fluorescent proteins (RFPs) are often probes of choice for living tissue microscopy and whole-body imaging. When choosing a specific RFP variant, the priority may be focused on fluorescence brightness, maturation rate, monomericity, excitation/emission wavelengths, and low toxicity, which are rarely combined in optimal way in a single protein. If the additional requirements such as prolonged fluorescence lifetime and/or blinking ability are applied, the available probe’s repertoire could become surprisingly narrow. Since the whole diversity of the conventional single-component RFPs belongs to just a few phylogenetic lines (with DsRed-, eqFP578- and eqFP611-derived being the major ones), it is not unexpected that their advantageous properties are split between close homologs. In such cases, a systematic mutagenetic analysis focused on variant-specific amino acid residues can shed light on the origins of sibling RFPs’ distinctness and might be beneficial for consolidation of their strengths in new RFP variants. For instance, the protein FusionRed, although being efficient in the fluorescence labeling due its good monomericity and low cytotoxicity, has undergone a considerable loss in fluorescence brightness/lifetime compared to the parental mKate2. In this contribution, we describe a fast-maturing monomeric RFP designed semi-rationally based on the mKate2 and FusionRed templates, outperforming both its parents in molecular brightness, having extended fluorescence lifetime, and showing spontaneous blinking pattern promising for nanoscopy use.
Open AccessThe two key substitutions in the chromophore environment of mKate2 to produce an enhanced FusionRed-like red fluorescent protein
Red fluorescent proteins (RFPs) are often probes of choice for living tissue microscopy and whole-body imaging. When choosing a specific RFP variant, the priority may be focused on fluorescence brightness, maturation rate, monomericity, excitation/emission wavelengths, and low toxicity, which are rarely combined in optimal way in a single protein. If the additional requirements such as prolonged fluorescence lifetime and/or blinking ability are applied, the available probe’s repertoire could become surprisingly narrow. Since the whole diversity of the conventional single-component RFPs belongs to just a few phylogenetic lines (with DsRed-, eqFP578- and eqFP611-derived being the major ones), it is not unexpected that their advantageous properties are split between close homologs. In such cases, a systematic mutagenetic analysis focused on variant-specific amino acid residues can shed light on the origins of sibling RFPs’ distinctness and might be beneficial for consolidation of their strengths in new RFP variants. For instance, the protein FusionRed, although being efficient in the fluorescence labeling due its good monomericity and low cytotoxicity, has undergone a considerable loss in fluorescence brightness/lifetime compared to the parental mKate2. In this contribution, we describe a fast-maturing monomeric RFP designed semi-rationally based on the mKate2 and FusionRed templates, outperforming both its parents in molecular brightness, having extended fluorescence lifetime, and showing spontaneous blinking pattern promising for nanoscopy use.
- Open Access
- 27 April 2023
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 24 (9) , 7958
NanoLuc Luciferase as a Fluorogen-Activating Protein for GFP Chromophore Based Fluorogens
In this work, we showed that the well-known NanoLuc luciferase can act as a fluorogen activating protein for various arylidene-imidazolones structurally similar to the Kaede protein chromophore. We showed that such compounds can be used as fluorescent sensors for this protein and can also be used in pairs with it in fluorescent microscopy as a genetically encoded tag.
- 27 April 2023
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 24 (9) , 7958
Open AccessNanoLuc Luciferase as a Fluorogen-Activating Protein for GFP Chromophore Based Fluorogens
In this work, we showed that the well-known NanoLuc luciferase can act as a fluorogen activating protein for various arylidene-imidazolones structurally similar to the Kaede protein chromophore. We showed that such compounds can be used as fluorescent sensors for this protein and can also be used in pairs with it in fluorescent microscopy as a genetically encoded tag.
- Open Access
- 15 April 2022
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 23 (8) , 4396
Add and Go: FRET Acceptor for Live-Cell Measurements Modulated by Externally Provided Ligand
A substantial number of genetically encoded fluorescent sensors rely on the changes in FRET efficiency between fluorescent cores, measured in ratiometric mode, with acceptor photobleaching or by changes in fluorescence lifetime. We report on a modulated FRET acceptor allowing for simplified one-channel FRET measurement based on a previously reported fluorogen-activating protein, DiB1. Upon the addition of the cell-permeable chromophore, the fluorescence of the donor-fluorescent protein mNeonGreen decreases, allowing for a simplified one-channel FRET measurement. The reported chemically modulated FRET acceptor is compatible with live-cell experiments and allows for prolonged time-lapse experiments with dynamic energy transfer evaluation.
- 15 April 2022
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 23 (8) , 4396
Open AccessAdd and Go: FRET Acceptor for Live-Cell Measurements Modulated by Externally Provided Ligand
A substantial number of genetically encoded fluorescent sensors rely on the changes in FRET efficiency between fluorescent cores, measured in ratiometric mode, with acceptor photobleaching or by changes in fluorescence lifetime. We report on a modulated FRET acceptor allowing for simplified one-channel FRET measurement based on a previously reported fluorogen-activating protein, DiB1. Upon the addition of the cell-permeable chromophore, the fluorescence of the donor-fluorescent protein mNeonGreen decreases, allowing for a simplified one-channel FRET measurement. The reported chemically modulated FRET acceptor is compatible with live-cell experiments and allows for prolonged time-lapse experiments with dynamic energy transfer evaluation.
- Open Access
- 8 November 2021
- Published by Public Library of Science (PLoS) in PLOS Computational Biology
- Vol. 17 (11) , e1009555
Computational redesign of a fluorogen activating protein with Rosetta
The use of unnatural fluorogenic molecules widely expands the pallet of available genetically encoded fluorescent imaging tools through the design of fluorogen activating proteins (FAPs). While there is already a handful of such probes available, each of them went through laborious cycles of in vitro screening and selection. Computational modeling approaches are evolving incredibly fast right now and are demonstrating great results in many applications, including de novo protein design. It suggests that the easier task of fine-tuning the fluorogen-binding properties of an already functional protein in silico should be readily achievable. To test this hypothesis, we used Rosetta for computational ligand docking followed by protein binding pocket redesign to further improve the previously described FAP DiB1 that is capable of binding to a BODIPY-like dye M739. Despite an inaccurate initial docking of the chromophore, the incorporated mutations nevertheless improved multiple photophysical parameters as well as the overall performance of the tag. The designed protein, DiB-RM, shows higher brightness, localization precision, and apparent photostability in protein-PAINT super-resolution imaging compared to its parental variant DiB1. Moreover, DiB-RM can be cleaved to obtain an efficient split system with enhanced performance compared to a parental DiB-split system. The possible reasons for the inaccurate ligand binding pose prediction and its consequence on the outcome of the design experiment are further discussed.
- 8 November 2021
- Published by Public Library of Science (PLoS) in PLOS Computational Biology
- Vol. 17 (11) , e1009555
Open AccessComputational redesign of a fluorogen activating protein with Rosetta
The use of unnatural fluorogenic molecules widely expands the pallet of available genetically encoded fluorescent imaging tools through the design of fluorogen activating proteins (FAPs). While there is already a handful of such probes available, each of them went through laborious cycles of in vitro screening and selection. Computational modeling approaches are evolving incredibly fast right now and are demonstrating great results in many applications, including de novo protein design. It suggests that the easier task of fine-tuning the fluorogen-binding properties of an already functional protein in silico should be readily achievable. To test this hypothesis, we used Rosetta for computational ligand docking followed by protein binding pocket redesign to further improve the previously described FAP DiB1 that is capable of binding to a BODIPY-like dye M739. Despite an inaccurate initial docking of the chromophore, the incorporated mutations nevertheless improved multiple photophysical parameters as well as the overall performance of the tag. The designed protein, DiB-RM, shows higher brightness, localization precision, and apparent photostability in protein-PAINT super-resolution imaging compared to its parental variant DiB1. Moreover, DiB-RM can be cleaved to obtain an efficient split system with enhanced performance compared to a parental DiB-split system. The possible reasons for the inaccurate ligand binding pose prediction and its consequence on the outcome of the design experiment are further discussed.
- Open Access
- 30 October 2021
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 22 (21) , 11799
Transient Fluorescence Labeling: Low Affinity—High Benefits
Fluorescent labeling is an established method for visualizing cellular structures and dynamics. The fundamental diffraction limit in image resolution was recently bypassed with the development of super-resolution microscopy. Notably, both localization microscopy and stimulated emission depletion (STED) microscopy impose tight restrictions on the physico-chemical properties of labels. One of them—the requirement for high photostability—can be satisfied by transiently interacting labels: a constant supply of transient labels from a medium replenishes the loss in the signal caused by photobleaching. Moreover, exchangeable tags are less likely to hinder the intrinsic dynamics and cellular functions of labeled molecules. Low-affinity labels may be used both for fixed and living cells in a range of nanoscopy modalities. Nevertheless, the design of optimal labeling and imaging protocols with these novel tags remains tricky. In this review, we highlight the pros and cons of a wide variety of transiently interacting labels. We further discuss the state of the art and future perspectives of low-affinity labeling methods.
- 30 October 2021
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 22 (21) , 11799
Open AccessTransient Fluorescence Labeling: Low Affinity—High Benefits
Fluorescent labeling is an established method for visualizing cellular structures and dynamics. The fundamental diffraction limit in image resolution was recently bypassed with the development of super-resolution microscopy. Notably, both localization microscopy and stimulated emission depletion (STED) microscopy impose tight restrictions on the physico-chemical properties of labels. One of them—the requirement for high photostability—can be satisfied by transiently interacting labels: a constant supply of transient labels from a medium replenishes the loss in the signal caused by photobleaching. Moreover, exchangeable tags are less likely to hinder the intrinsic dynamics and cellular functions of labeled molecules. Low-affinity labels may be used both for fixed and living cells in a range of nanoscopy modalities. Nevertheless, the design of optimal labeling and imaging protocols with these novel tags remains tricky. In this review, we highlight the pros and cons of a wide variety of transiently interacting labels. We further discuss the state of the art and future perspectives of low-affinity labeling methods.
- 18 December 2020
- Published by Wiley in Chemistry – A European Journal
- Vol. 27 (12) , 3986-3990
Color Tuning of Fluorogens for FAST Fluorogen‐Activating Protein
Using benzylidene imidazolone core, we created a panel of color‐shifted fluorogenic ligands for FAST protein without compromise to the binding efficiency and the utility for live‐cell protein labeling. This study highlights the potential of benzylidene imidazolones derivatives for rapid expansion of a pallet of live‐cell fluorogenic labeling tools.
- 18 December 2020
- Published by Wiley in Chemistry – A European Journal
- Vol. 27 (12) , 3986-3990
Color Tuning of Fluorogens for FAST Fluorogen‐Activating Protein
Using benzylidene imidazolone core, we created a panel of color‐shifted fluorogenic ligands for FAST protein without compromise to the binding efficiency and the utility for live‐cell protein labeling. This study highlights the potential of benzylidene imidazolones derivatives for rapid expansion of a pallet of live‐cell fluorogenic labeling tools.
- 18 August 2020
- Published by American Chemical Society (ACS) in ACS Chemical Biology
- Vol. 15 (9) , 2456-2465
Structure-Based Rational Design of Two Enhanced Bacterial Lipocalin Blc Tags for Protein-PAINT Super-resolution Microscopy
Super-resolution fluorescent imaging in living cells remains technically challenging due in large part to the photodecomposition of fluorescent tags. Recently suggested protein-PAINT is the only super-resolution technique available for prolonged imaging of proteins in living cells. It is realized with complexes of fluorogen-activating proteins, expressed as fusions, and solvatochromic synthetic dyes. Once photobleached, the dye in the complex is replaced with a fresh fluorogen available in the sample. With suitable kinetics, this replacement creates fluorescence blinking required for attaining super-resolution and overcomes photobleaching associated with loss of irreplaceable fluorophores. Here we report on the rational design of two protein-PAINT tags based on the 1.58 Å crystal structure of DiB1 : M739 complex: an improved green-emitting DiB3/F74V:M739 and a new orange-emitting DiB3/F53L:M739 that outperform previously reported DiB-based tags to become best in class biomarkers for protein-PAINT. These tags advance protein-PAINT from the proof-of-concept to a reliable tool suitable for prolonged super-resolution imaging of intracellular proteins in fixed and living cells and two-color PAINT-like nanoscopy with a single fluorogen.
- 18 August 2020
- Published by American Chemical Society (ACS) in ACS Chemical Biology
- Vol. 15 (9) , 2456-2465
Structure-Based Rational Design of Two Enhanced Bacterial Lipocalin Blc Tags for Protein-PAINT Super-resolution Microscopy
Super-resolution fluorescent imaging in living cells remains technically challenging due in large part to the photodecomposition of fluorescent tags. Recently suggested protein-PAINT is the only super-resolution technique available for prolonged imaging of proteins in living cells. It is realized with complexes of fluorogen-activating proteins, expressed as fusions, and solvatochromic synthetic dyes. Once photobleached, the dye in the complex is replaced with a fresh fluorogen available in the sample. With suitable kinetics, this replacement creates fluorescence blinking required for attaining super-resolution and overcomes photobleaching associated with loss of irreplaceable fluorophores. Here we report on the rational design of two protein-PAINT tags based on the 1.58 Å crystal structure of DiB1 : M739 complex: an improved green-emitting DiB3/F74V:M739 and a new orange-emitting DiB3/F53L:M739 that outperform previously reported DiB-based tags to become best in class biomarkers for protein-PAINT. These tags advance protein-PAINT from the proof-of-concept to a reliable tool suitable for prolonged super-resolution imaging of intracellular proteins in fixed and living cells and two-color PAINT-like nanoscopy with a single fluorogen.
- Open Access
- 6 July 2020
- Published by Springer Nature in Scientific Reports
- Vol. 10 (1) , 1-11
DiB-splits: nature-guided design of a novel fluorescent labeling split system
Fluorogen-activating proteins (FAPs) are innovative fluorescent probes combining advantages of genetically-encoded proteins such as green fluorescent protein and externally added fluorogens that allow for highly tunable and on demand fluorescent signaling. Previously, a panel of green- and red-emitting FAPs has been created from bacterial lipocalin Blc (named DiBs). Here we present a rational design as well as functional and structural characterization of the first self-assembling FAP split system, DiB-splits. This new system decreases the size of the FAP label to ~8–12 kDa while preserving DiBs’ unique properties: strong increase in fluorescence intensity of the chromophore upon binding, binding affinities to the chromophore in nanomolar to low micromolar range, and high photostability of the protein-ligand complex. These properties allow for use of DiB-splits for wide-field, confocal, and super-resolution fluorescence microscopy. DiB-splits also represent an attractive starting point for further design of a protein-protein interaction detection system as well as novel FAP-based sensors.
- 6 July 2020
- Published by Springer Nature in Scientific Reports
- Vol. 10 (1) , 1-11
Open AccessDiB-splits: nature-guided design of a novel fluorescent labeling split system
Fluorogen-activating proteins (FAPs) are innovative fluorescent probes combining advantages of genetically-encoded proteins such as green fluorescent protein and externally added fluorogens that allow for highly tunable and on demand fluorescent signaling. Previously, a panel of green- and red-emitting FAPs has been created from bacterial lipocalin Blc (named DiBs). Here we present a rational design as well as functional and structural characterization of the first self-assembling FAP split system, DiB-splits. This new system decreases the size of the FAP label to ~8–12 kDa while preserving DiBs’ unique properties: strong increase in fluorescence intensity of the chromophore upon binding, binding affinities to the chromophore in nanomolar to low micromolar range, and high photostability of the protein-ligand complex. These properties allow for use of DiB-splits for wide-field, confocal, and super-resolution fluorescence microscopy. DiB-splits also represent an attractive starting point for further design of a protein-protein interaction detection system as well as novel FAP-based sensors.
- 1 February 2020
- Published by Elsevier in Biochemical and Biophysical Research Communications
- Vol. 522 (4) , 852-854
Live-cell nanoscopy with spontaneous blinking of conventional green fluorescent proteins
- 1 February 2020
- Published by Elsevier in Biochemical and Biophysical Research Communications
- Vol. 522 (4) , 852-854
Live-cell nanoscopy with spontaneous blinking of conventional green fluorescent proteins