Ariana Levitt
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ariana Levitt has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
Genevieve Dion
9 shared publications- Yury Gogotsi
A.J. Drexel Nanomaterials Institute and Department of Materials Science and Engineering, Drexel University, Philadelphia, USA
9 shared publications - Joselito Macabuhay Razal
Institute for Frontier Materials, Deakin University, Geelong, VIC 3216, Australia
5 shared publications - Simge Uzun
A. J. Drexel Nanomaterials Institute Department of Materials Science and Engineering Drexel University Philadelphia PA 19104 USA
5 shared publications - Shayan Seyedin
School of Engineering Newcastle University Newcastle upon Tyne UK
4 shared publications - Christine B. Hatter
A. J. Drexel Nanomaterials Institute and Department of Materials Science and Engineering Drexel University Philadelphia PA 19104 USA
3 shared publications
Latest Publications
- 16 July 2021
- Published by Drexel University Libraries
Manufacturing of MXene-Based Fibers, Yarns, and Knitted Electrochemical Capacitors
Textile-based energy storage devices are a flexible, safe, and lightweight solution to powering wearable electronic devices. While they have benefited from the discovery of new conductive materials and innovations in device design, the limited energy density of energy storage textiles has restricted their use in practical applications. To improve the electrochemical performance of such devices requires new electrode materials that have higher electronic conductivity and theoretical capacitance than present materials. Ti₃C₂T_x, the most studied member in the MXene family, is known for its metallic conductivity and high volumetric capacitance in acidic electrolytes due to its pseudocapacitive behavior. These properties, along with its processability, make MXene an attractive material for the development of electrodes, current collectors, and interconnects for textile-based energy storage devices. The first demonstrations of MXene-based fibers and yarns showed their potential to enable energy storage in textiles. However, achieving high loadings of MXene while simultaneously demonstrating flexibility presents a critical challenge, preventing their integration into textiles using industrial manufacturing equipment. In order to improve the properties of MXene-based fibers and yarns, a systematic study is needed to understand how flake size, concentration, polymer type, and fiber architecture influence fiber/yarn properties and device performance. This dissertation aims to design and develop MXene-based fiber and yarn electrodes with high electrical conductivity and electrochemical performance for the manufacture of knitted energy storage textiles. Various methods are explored to capture and infiltrate MXene into fibers and yarns, including electrospinning and coating. By producing MXene-based fibers and yarns with different architectures (coated and composite), MXene flake size, concentration, and polymer host, the effects of fundamental material and fabrication parameters on fiber and yarn properties (mechanical, electrical, and electrochemical) are investigated. The fabrication of meters of conductive and electrochemically active fiber/yarn electrodes enabled the development of the first prototypes of knitted energy storage devices using industrial machines. The relationship between knit structure and electrochemical performance is explored to provide insights into the design of knitted energy storage devices to maximize capacitance, energy density, and power density. This dissertation represents a major step towards the mass production of knittable yarn electrodes and textile energy storage devices and their use in practical applications. Keywords: 3D Knitting, Fibers, MXene, Nanomaterials, Smart Textiles, Textile Energy Storage
- 16 July 2021
- Published by Drexel University Libraries
Manufacturing of MXene-Based Fibers, Yarns, and Knitted Electrochemical Capacitors
Textile-based energy storage devices are a flexible, safe, and lightweight solution to powering wearable electronic devices. While they have benefited from the discovery of new conductive materials and innovations in device design, the limited energy density of energy storage textiles has restricted their use in practical applications. To improve the electrochemical performance of such devices requires new electrode materials that have higher electronic conductivity and theoretical capacitance than present materials. Ti₃C₂T_x, the most studied member in the MXene family, is known for its metallic conductivity and high volumetric capacitance in acidic electrolytes due to its pseudocapacitive behavior. These properties, along with its processability, make MXene an attractive material for the development of electrodes, current collectors, and interconnects for textile-based energy storage devices. The first demonstrations of MXene-based fibers and yarns showed their potential to enable energy storage in textiles. However, achieving high loadings of MXene while simultaneously demonstrating flexibility presents a critical challenge, preventing their integration into textiles using industrial manufacturing equipment. In order to improve the properties of MXene-based fibers and yarns, a systematic study is needed to understand how flake size, concentration, polymer type, and fiber architecture influence fiber/yarn properties and device performance. This dissertation aims to design and develop MXene-based fiber and yarn electrodes with high electrical conductivity and electrochemical performance for the manufacture of knitted energy storage textiles. Various methods are explored to capture and infiltrate MXene into fibers and yarns, including electrospinning and coating. By producing MXene-based fibers and yarns with different architectures (coated and composite), MXene flake size, concentration, and polymer host, the effects of fundamental material and fabrication parameters on fiber and yarn properties (mechanical, electrical, and electrochemical) are investigated. The fabrication of meters of conductive and electrochemically active fiber/yarn electrodes enabled the development of the first prototypes of knitted energy storage devices using industrial machines. The relationship between knit structure and electrochemical performance is explored to provide insights into the design of knitted energy storage devices to maximize capacitance, energy density, and power density. This dissertation represents a major step towards the mass production of knittable yarn electrodes and textile energy storage devices and their use in practical applications. Keywords: 3D Knitting, Fibers, MXene, Nanomaterials, Smart Textiles, Textile Energy Storage
Bath Electrospinning of Continuous and Scalable Multifunctional MXene‐Infiltrated Nanoyarns
Electroactive yarns that are stretchable are desired for many electronic textile applications, including energy storage, soft robotics, and sensing. However, using current methods to produce these yarns, achieving high loadings of electroactive materials and simultaneously demonstrating stretchability is a critical challenge. Here, a one‐step bath electrospinning technique is developed to effectively capture Ti3C2Tx MXene flakes throughout continuous nylon and polyurethane (PU) nanofiber yarns (nanoyarns). With up to ≈90 wt% MXene loading, the resulting MXene/nylon nanoyarns demonstrate high electrical conductivity (up to 1195 S cm−1). By varying the flake size and MXene concentration, nanoyarns achieve stretchability of up to 43% (MXene/nylon) and 263% (MXene/PU). MXene/nylon nanoyarn electrodes offer high specific capacitance in saturated LiClO4 electrolyte (440 F cm−3 at 5 mV s−1), with a wide voltage window of 1.25 V and high rate capability (72% between 5 and 500 mV s−1). As strain sensors, MXene/PU yarns demonstrate a wide sensing range (60% under cyclic stretching), high sensitivity (gauge factor of ≈17 in the range of 20–50% strain), and low drift. Utilizing the stretchability of polymer nanofibers and the electrical and electrochemical properties of MXene, MXene‐based nanoyarns demonstrate potential in a wide range of applications, including stretchable electronics and body movement monitoring.
Bath Electrospinning of Continuous and Scalable Multifunctional MXene‐Infiltrated Nanoyarns
Electroactive yarns that are stretchable are desired for many electronic textile applications, including energy storage, soft robotics, and sensing. However, using current methods to produce these yarns, achieving high loadings of electroactive materials and simultaneously demonstrating stretchability is a critical challenge. Here, a one‐step bath electrospinning technique is developed to effectively capture Ti3C2Tx MXene flakes throughout continuous nylon and polyurethane (PU) nanofiber yarns (nanoyarns). With up to ≈90 wt% MXene loading, the resulting MXene/nylon nanoyarns demonstrate high electrical conductivity (up to 1195 S cm−1). By varying the flake size and MXene concentration, nanoyarns achieve stretchability of up to 43% (MXene/nylon) and 263% (MXene/PU). MXene/nylon nanoyarn electrodes offer high specific capacitance in saturated LiClO4 electrolyte (440 F cm−3 at 5 mV s−1), with a wide voltage window of 1.25 V and high rate capability (72% between 5 and 500 mV s−1). As strain sensors, MXene/PU yarns demonstrate a wide sensing range (60% under cyclic stretching), high sensitivity (gauge factor of ≈17 in the range of 20–50% strain), and low drift. Utilizing the stretchability of polymer nanofibers and the electrical and electrochemical properties of MXene, MXene‐based nanoyarns demonstrate potential in a wide range of applications, including stretchable electronics and body movement monitoring.
- Top Cited Papers
- 1 April 2020
- Published by Elsevier in Materials Today
- Vol. 34, 17-29
3D knitted energy storage textiles using MXene-coated yarns
- 1 April 2020
- Published by Elsevier in Materials Today
- Vol. 34, 17-29
Top Cited Papers3D knitted energy storage textiles using MXene-coated yarns
- Top Cited Papers
- 7 February 2020
- Published by Wiley in Advanced Functional Materials
- Vol. 30 (12) , 1910504
MXene Composite and Coaxial Fibers with High Stretchability and Conductivity for Wearable Strain Sensing Textiles
The integration of nanomaterials with high conductivity into stretchable polymer fibers can achieve novel functionalities such as sensing physical deformations. With a metallic conductivity that exceeds other solution‐processed nanomaterials, 2D titanium carbide MXene is an attractive material to produce conducting and stretchable fibers. Here, a scalable wet‐spinning technique is used to produce Ti3C2Tx MXene/polyurethane (PU) composite fibers that show both conductivity and high stretchability. The conductivity at a very low percolation threshold of ≈1 wt% is demonstrated, which is lower than the previously reported values for MXene‐based polymer composites. When used as a strain sensor, the MXene/PU composite fibers show a high gauge factor of ≈12900 (≈238 at 50% strain) and a large sensing strain of ≈152%. The cyclic strain sensing performance is further improved by producing fibers with MXene/PU sheath and pure PU core using a coaxial wet‐spinning process. Using a commercial‐scale knitting machine, MXene/PU fibers are knitted into a one‐piece elbow sleeve, which can track various movements of the wearer's elbow. This study establishes fundamental insights into the behavior of MXene in elastomeric composites and presents strategies to achieve MXene‐based fibers and textiles with strain sensing properties suitable for applications in health, sports, and entertainment.
- 7 February 2020
- Published by Wiley in Advanced Functional Materials
- Vol. 30 (12) , 1910504
Top Cited PapersMXene Composite and Coaxial Fibers with High Stretchability and Conductivity for Wearable Strain Sensing Textiles
The integration of nanomaterials with high conductivity into stretchable polymer fibers can achieve novel functionalities such as sensing physical deformations. With a metallic conductivity that exceeds other solution‐processed nanomaterials, 2D titanium carbide MXene is an attractive material to produce conducting and stretchable fibers. Here, a scalable wet‐spinning technique is used to produce Ti3C2Tx MXene/polyurethane (PU) composite fibers that show both conductivity and high stretchability. The conductivity at a very low percolation threshold of ≈1 wt% is demonstrated, which is lower than the previously reported values for MXene‐based polymer composites. When used as a strain sensor, the MXene/PU composite fibers show a high gauge factor of ≈12900 (≈238 at 50% strain) and a large sensing strain of ≈152%. The cyclic strain sensing performance is further improved by producing fibers with MXene/PU sheath and pure PU core using a coaxial wet‐spinning process. Using a commercial‐scale knitting machine, MXene/PU fibers are knitted into a one‐piece elbow sleeve, which can track various movements of the wearer's elbow. This study establishes fundamental insights into the behavior of MXene in elastomeric composites and presents strategies to achieve MXene‐based fibers and textiles with strain sensing properties suitable for applications in health, sports, and entertainment.
- Top Cited Papers
- 3 February 2020
- Published by Wiley in Advanced Engineering Materials
- Vol. 22 (3) , 1901241
Scalable Synthesis of Ti 3 C 2 T x MXene
Scaling the production of synthetic 2D materials to industrial quantities has faced significant challenges due to synthesis bottlenecks whereby few have been produced in large volumes. These challenges typically stem from bottom‐up approaches limiting the production to the substrate size or precursor availability for chemical synthesis and/or exfoliation. In contrast, MXenes, a large class of 2D transition metal carbides and/or nitrides, are produced via a top‐down synthesis approach. The selective wet etching process does not have similar synthesis constraints as some other 2D materials. The reaction occurs in the whole volume; therefore, the process can be readily scaled with reactor volume. Herein, the synthesis of 2D titanium carbide MXene (Ti3C2Tx) is studied in two batch sizes, 1 and 50 g, to determine if large‐volume synthesis affects the resultant structure or composition of MXene flakes. Characterization of the morphology and properties of the produced MXene using scanning electron microscopy, X‐ray diffraction, dynamic light scattering, Raman spectroscopy, X‐ray photoelectron spectroscopy, UV–visible spectroscopy, and conductivity measurements show that the materials produced in both batch sizes are essentially identical. This illustrates that MXenes experience no change in structure or properties when scaling synthesis, making them viable for further scale‐up and commercialization.
- 3 February 2020
- Published by Wiley in Advanced Engineering Materials
- Vol. 22 (3) , 1901241
Top Cited PapersScalable Synthesis of Ti 3 C 2 T x MXene
Scaling the production of synthetic 2D materials to industrial quantities has faced significant challenges due to synthesis bottlenecks whereby few have been produced in large volumes. These challenges typically stem from bottom‐up approaches limiting the production to the substrate size or precursor availability for chemical synthesis and/or exfoliation. In contrast, MXenes, a large class of 2D transition metal carbides and/or nitrides, are produced via a top‐down synthesis approach. The selective wet etching process does not have similar synthesis constraints as some other 2D materials. The reaction occurs in the whole volume; therefore, the process can be readily scaled with reactor volume. Herein, the synthesis of 2D titanium carbide MXene (Ti3C2Tx) is studied in two batch sizes, 1 and 50 g, to determine if large‐volume synthesis affects the resultant structure or composition of MXene flakes. Characterization of the morphology and properties of the produced MXene using scanning electron microscopy, X‐ray diffraction, dynamic light scattering, Raman spectroscopy, X‐ray photoelectron spectroscopy, UV–visible spectroscopy, and conductivity measurements show that the materials produced in both batch sizes are essentially identical. This illustrates that MXenes experience no change in structure or properties when scaling synthesis, making them viable for further scale‐up and commercialization.
- Open Access
- 11 December 2019
- Published by Institution of Engineering and Technology (IET) in IET Microwaves, Antennas & Propagation
- Vol. 14 (3) , 154-158
Efficiency measurement of the flexible on‐body antenna at varying levels of stretch in a reverberation chamber
Flexible antennas have the potential to transform wearable and fabric‐based wireless sensing technologies. The antenna discussed in this study is part of a sensing system that uses the back‐scattered power level as the decision metric. For a good wireless sensor, it is necessary to offer a feasible read range and maintain good distinctions in the back‐scattered power levels between the different states (i.e. level of stretch) of the antenna. Moreover, effects due to human body proximity should be minimised. For these reasons, the radiation efficiency is a crucial parameter to investigate. This study presents the radiation efficiency measurement of the proposed flexible knitted ‘Bellyband’ antenna at two different levels of stretch in a reverberation chamber. This work validates the reverberation chamber measurements through comparison with simulations and anechoic chamber measurements at 900 MHz. Moreover, this work demonstrates how the approach can be used to quantify bellyband antenna efficiency in the vicinity of a human body. Finally, the efficiency results were used to predict the read range of Bellyband radio frequency identification technology.
- 11 December 2019
- Published by Institution of Engineering and Technology (IET) in IET Microwaves, Antennas & Propagation
- Vol. 14 (3) , 154-158
Open AccessEfficiency measurement of the flexible on‐body antenna at varying levels of stretch in a reverberation chamber
Flexible antennas have the potential to transform wearable and fabric‐based wireless sensing technologies. The antenna discussed in this study is part of a sensing system that uses the back‐scattered power level as the decision metric. For a good wireless sensor, it is necessary to offer a feasible read range and maintain good distinctions in the back‐scattered power levels between the different states (i.e. level of stretch) of the antenna. Moreover, effects due to human body proximity should be minimised. For these reasons, the radiation efficiency is a crucial parameter to investigate. This study presents the radiation efficiency measurement of the proposed flexible knitted ‘Bellyband’ antenna at two different levels of stretch in a reverberation chamber. This work validates the reverberation chamber measurements through comparison with simulations and anechoic chamber measurements at 900 MHz. Moreover, this work demonstrates how the approach can be used to quantify bellyband antenna efficiency in the vicinity of a human body. Finally, the efficiency results were used to predict the read range of Bellyband radio frequency identification technology.
- Top Cited Papers
- 5 September 2019
- Published by Wiley in Advanced Functional Materials
- Vol. 29 (45)
Knittable and Washable Multifunctional MXene‐Coated Cellulose Yarns
Textile‐based electronics enable the next generation of wearable devices, which have the potential to transform the architecture of consumer electronics. Highly conductive yarns that can be manufactured using industrial‐scale processing and be washed like everyday yarns are needed to fulfill the promise and rapid growth of the smart textile industry. By coating cellulose yarns with Ti3C2Tx MXene, highly conductive and electroactive yarns are produced, which can be knitted into textiles using an industrial knitting machine. It is shown that yarns with MXene loading of ≈77 wt% (≈2.2 mg cm−1) have conductivity of up to 440 S cm−1. After washing for 45 cycles at temperatures ranging from 30 to 80 °C, MXene‐coated cotton yarns exhibit a minimal increase in resistance while maintaining constant MXene loading. The MXene‐coated cotton yarn electrode offers a specific capacitance of 759.5 mF cm−1 at 2 mV s−1. A fully knitted textile‐based capacitive pressure sensor is also prepared, which offers high sensitivity (gauge factor of ≈6.02), wide sensing range of up to ≈20% compression, and excellent cycling stability (2000 cycles at ≈14% compression strain). This work provides new and practical insights toward the development of platform technology that can integrate MXene in cellulose‐based yarns for textile‐based devices.
- 5 September 2019
- Published by Wiley in Advanced Functional Materials
- Vol. 29 (45)
Top Cited PapersKnittable and Washable Multifunctional MXene‐Coated Cellulose Yarns
Textile‐based electronics enable the next generation of wearable devices, which have the potential to transform the architecture of consumer electronics. Highly conductive yarns that can be manufactured using industrial‐scale processing and be washed like everyday yarns are needed to fulfill the promise and rapid growth of the smart textile industry. By coating cellulose yarns with Ti3C2Tx MXene, highly conductive and electroactive yarns are produced, which can be knitted into textiles using an industrial knitting machine. It is shown that yarns with MXene loading of ≈77 wt% (≈2.2 mg cm−1) have conductivity of up to 440 S cm−1. After washing for 45 cycles at temperatures ranging from 30 to 80 °C, MXene‐coated cotton yarns exhibit a minimal increase in resistance while maintaining constant MXene loading. The MXene‐coated cotton yarn electrode offers a specific capacitance of 759.5 mF cm−1 at 2 mV s−1. A fully knitted textile‐based capacitive pressure sensor is also prepared, which offers high sensitivity (gauge factor of ≈6.02), wide sensing range of up to ≈20% compression, and excellent cycling stability (2000 cycles at ≈14% compression strain). This work provides new and practical insights toward the development of platform technology that can integrate MXene in cellulose‐based yarns for textile‐based devices.
- 1 July 2019
- Published by Elsevier in Energy Storage Materials
- Vol. 20, 455-461
MXene-conducting polymer electrochromic microsupercapacitors
- 1 July 2019
- Published by Elsevier in Energy Storage Materials
- Vol. 20, 455-461
MXene-conducting polymer electrochromic microsupercapacitors
- Top Cited Papers
- 27 November 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (1) , 269-277
Electrospun MXene/carbon nanofibers as supercapacitor electrodes
Free-standing Ti3C2Tx MXene/carbon nanofiber electrodes are prepared via electrospinning Ti3C2Tx MXene flakes with polyacrylonitrile (PAN) and carbonizing the fiber networks. Using this simple fabrication method, delaminated MXene flakes are embedded within carbon nanofibers and these fiber mats are used as electrodes without binders or additives. Unlike coated electrodes, which may suffer from the active material delaminating from the substrate during folding or bending, composite electrodes are stable and durable. Previous attempts to incorporate Ti3C2Tx MXene into electrospun fibers resulted in low mass loadings, ∼1 wt% Ti3C2Tx MXene. In this work, MXene flakes are added into PAN solutions at a weight ratio of 2 : 1 (MXene : PAN) in the spinning dope, producing fiber mats with up to 35 wt% MXene. Composite electrodes have high areal capacitance, up to 205 mF cm−2 at 50 mV s−1, almost three times that of pure carbonized PAN nanofibers (70 mF cm−2 at 50 mV s−1). Compared with electrospun nanofibers spray-coated with Ti3C2Tx, these composite fibers exhibit double the areal capacitance at 10 mV s−1. This method can be used to produce MXene composite fibers using a variety of polymers, which have potential applications beyond energy storage, including filtration, adsorption, and electrocatalysis, where fibers with high aspect ratio, accessible surface, and porosity are desirable.
- 27 November 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (1) , 269-277
Top Cited PapersElectrospun MXene/carbon nanofibers as supercapacitor electrodes
Free-standing Ti3C2Tx MXene/carbon nanofiber electrodes are prepared via electrospinning Ti3C2Tx MXene flakes with polyacrylonitrile (PAN) and carbonizing the fiber networks. Using this simple fabrication method, delaminated MXene flakes are embedded within carbon nanofibers and these fiber mats are used as electrodes without binders or additives. Unlike coated electrodes, which may suffer from the active material delaminating from the substrate during folding or bending, composite electrodes are stable and durable. Previous attempts to incorporate Ti3C2Tx MXene into electrospun fibers resulted in low mass loadings, ∼1 wt% Ti3C2Tx MXene. In this work, MXene flakes are added into PAN solutions at a weight ratio of 2 : 1 (MXene : PAN) in the spinning dope, producing fiber mats with up to 35 wt% MXene. Composite electrodes have high areal capacitance, up to 205 mF cm−2 at 50 mV s−1, almost three times that of pure carbonized PAN nanofibers (70 mF cm−2 at 50 mV s−1). Compared with electrospun nanofibers spray-coated with Ti3C2Tx, these composite fibers exhibit double the areal capacitance at 10 mV s−1. This method can be used to produce MXene composite fibers using a variety of polymers, which have potential applications beyond energy storage, including filtration, adsorption, and electrocatalysis, where fibers with high aspect ratio, accessible surface, and porosity are desirable.
High‐Performance Biscrolled MXene/Carbon Nanotube Yarn Supercapacitors
Yarn‐shaped supercapacitors (YSCs) once integrated into fabrics provide promising energy storage solutions to the increasing demand of wearable and portable electronics. In such device format, however, it is a challenge to achieve outstanding electrochemical performance without compromising flexibility. Here, MXene‐based YSCs that exhibit both flexibility and superior energy storage performance by employing a biscrolling approach to create flexible yarns from highly delaminated and pseudocapacitive MXene sheets that are trapped within helical yarn corridors are reported. With specific capacitance and energy and power densities values exceeding those reported for any YSCs, this work illustrates that biscrolled MXene yarns can potentially provide the conformal energy solution for powering electronics beyond just the form factor of flexible YSCs.
High‐Performance Biscrolled MXene/Carbon Nanotube Yarn Supercapacitors
Yarn‐shaped supercapacitors (YSCs) once integrated into fabrics provide promising energy storage solutions to the increasing demand of wearable and portable electronics. In such device format, however, it is a challenge to achieve outstanding electrochemical performance without compromising flexibility. Here, MXene‐based YSCs that exhibit both flexibility and superior energy storage performance by employing a biscrolling approach to create flexible yarns from highly delaminated and pseudocapacitive MXene sheets that are trapped within helical yarn corridors are reported. With specific capacitance and energy and power densities values exceeding those reported for any YSCs, this work illustrates that biscrolled MXene yarns can potentially provide the conformal energy solution for powering electronics beyond just the form factor of flexible YSCs.