PMPierric Mora

Pierric Mora

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pierric Mora has a total of 60 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Multi-frequency nonlinear Rayleigh wave mixing in highly attenuative and scattering media

    by Massina Fengal, Pierric Mora, Parisa Shokouhi, Erwann Rayssac, Eric Gennesseaux, Odile Abraham


  • Open Access

    A hybrid Finite Element method for elastic wave propagation in single and bi-layer strands

    by Université Gustave Eiffel, Konstantinos Kondylidis, Fabien Treyssede, Laurent Laguerre, Michael J.S. Lowe, Richard V. Craster, Evripides Georgiades, Pierric Mora

    Multi-wire cables are high performance structural elements popular in civil engineering applications like bridge systems, offshore structures and the power grid to name a few. Among the non-destructive structural health monitoring techniques available, ultrasonic guided waves afford several advantages in defect detection, as they span large distances and allow inspection in inaccessible areas. On the negative side, the complex helical morphology gives rise to non-trivial tension- and contact-dependent effects, which, combined with the multi-modal and dispersive nature of propagating waves, complicate measurement readings. This necessitates accurate modeling techniques to improve understanding of the underlying physics and facilitate result acquisition. Finite Element (FE) methods dominate elastic wave propagation modeling in multi-layer strands. The Semi Analytical FE (SAFE) method, which merges cross-section discretization with analytical axial propagation description, has successfully reproduced experimentally observed aspects in the 7-wire strand (1 straight core + 6 twisting peripheral wires). More recently, the Wave FE method was applied on a bi-layer cable, utilizing a bi-helical coordinate system and periodic boundary conditions on a 3D unit cell. In both cases, increased numerical cost, necessary for addressing contact effects, makes a simplified method desirable. Along these lines, a simplified closed-form alternative has been proposed for the 7-wire strand, initially 2D, comprised of masses interconnected via Hertzian springs. Expanding on that work, the current objective is a simplified method able to accurately describe elastic wave propagation in a) the 7-wire strand and b) a bi-layer strand, analytically accounting for contact effects, at reduced computational cost. First, longitudinal propagation in the 7-wire strand is accounted for by introducing Timoshenko kinematics enriched by Poisson effects. Dispersion relations are successfully acquired (Fig.1), very close to a FE reference solution within a satisfying low-frequency range, with an additional 3 orders of magnitude reduction in computational cost. Additional force and energy analysis enables organizing modes into zones characterized by their dependence on contact effects, improving intuition on the underlying physics. The addition of a second wire layer (12 wires, twisting in the opposite direction around the 7-wire strand) follows. However, the single-layer method is not readily generalizable to multi-layer cables due to intrinsic modeling restrictions, thus combination with traditional FE is sought. Floquet-Bloch periodic conditions are used on a unit cell, comprised of straight and twisting 1D beam elements, while contact effects are accounted for via appropriate element coupling. Concluding, the method shows potential as a low-cost, elastic wave propagation modeling methodology for multi-wire cables, consistent with complex real-life application requirements.

  • Nonlinear Coda Wave Interferometry: Preliminary results into using ambient noise as pump

    by Université Gustave Eiffel, Shilan Shaabani, Pierric Mora, Parisa Shokouhi, Olivier Durand, Odile Abraham

    Nonlinear ultrasonic techniques such as Nonlinear Coda Wave Interferometry (NCWI) address the limitations of linear ultrasonics in detecting tight cracks and microcracks. NCWI combines high-frequency Coda Wave Interferometry with high-amplitude, low-frequency pumping to probe pump-induced wave velocity changes caused by crack shearing or opening. Using dynamic service loading as the pump could enhance NCWI for in-situ monitoring, motivating this study. However, high-amplitude pumping induces transient, time-dependent changes, making NCWI results sensitive to pumping duration and history. Previous systematic investigations showed that longer pumping durations produce larger relative velocity changes, while descending amplitude sequences yield smaller changes due to history effects. Preliminary experiments replacing the conventional chirp pump with band-limited white noise show smaller velocity changes than chirp excitation, indicating pump signal–specific effects.

  • Open Access

    A simplified beam-spring model for wave propagation in the 7-wire strand

    by Konstantinos Kondylidis, Pierric Mora, Fabien Treyssède, Laurent Laguerre

  • Réponse élastodynamique d'une plaque stratifiée anisotrope : approches comparées. : Vers le développement de méthodes hybrides.

    by Pierric Mora

    Cette thèse traite de la résolution du problème direct de propagation d'un champ élastodynamique rayonné par une source dans un milieu stratifié anisotrope. Le contexte applicatif visé est le contrôle non destructif par ondes ultrasonores guidées de plaques de matériaux composites. Aux basses fréquences, ces matériaux sont assimilables à des milieux homogènes, anisotropes et dissipatifs. Deux approches causales sont étudiées et mises en oeuvre pour résoudre l'équation d'onde, et leur intérêt vis-à-vis de la méthode modale harmonique - la plus couramment employée dans ce domaine applicatif - est discuté. L'une des méthodes est modale et est formulée directement dans le domaine temporel. Elle permet de traiter facilement l'anisotropie, y compris en 3D, mais souffre des écueils classiques concernant le régime non-établi ou le cas du guide ouvert. L'autre approche est une formulation dans le domaine de Laplace de la méthode dite par ondes partielles. Elle présente l'intérêt d'être extrêmement polyvalente tout en conduisant à des coûts numériques tout à fait raisonnables. Dans un second temps, la possibilité d'exploiter ces deux méthodes pour résoudre des problèmes de diffraction par des défauts est étudiée. Une approche par éléments finis de frontière basée sur la méthode par ondes partielles est considérée. Elle permet de traiter efficacement le cas de défauts plans. L'extension à des défauts plus généraux est brièvement discutée.

  • Open Access

    Multi-frequency nonlinear Rayleigh wave mixing in highly dissipative and scattering media

    by Massina Fengal, Pierric Mora, Parisa Shokouhi, Erwann Rayssac, Gennesseaux Eric, Odile Abraham

    This study provides the theoretical foundation, numerical simulation and experimental verification of multi-frequency nonlinear Rayleigh wave mixing aimed at imaging the damage gradient in highly scattering and dissipative media. We focus on the mixing of two counter-propagating finite-amplitude Rayleigh waves generating a secondary higher frequency longitudinal wave detected at its source, directly above the interaction zone. This greatly mitigates the influence of the medium’s heterogeneity on the measured acoustic nonlinearity compared to the more classical self interaction experiments, where the measured higher harmonics are greatly affected by the scattering and attenuation along the propagation path. The Rayleigh waves’ excitation frequency defines the interaction zone within the bulk. By increasing or decreasing the frequency, the classical elastic nonlinearity of shallower or deeper regions are probed. The method is first investigated numerically before being applied experimentally to estimate depth-varying thermal damage-induced changes in acoustic nonlinearity in concrete and mortar blocks. The findings indicate the utility of nonlinear Rayleigh wave mixing for imaging the depth-dependent nonlinear elastic properties of highly heterogeneous materials.

  • Open Access

    A simplified beam-spring model for wave propagation in the 7-wire strand

    by Konstantinos Kondylidis, Pierric Mora, Fabien Treyssède, Laurent Laguerre

    We propose a simplified model for simulating guided wave propagation in multi-wire cables at low computational cost, in view of acoustic nondestructive health monitoring. Cable wires are treated here in the quasi-static approximation as beams interconnected with Hertzian springs, whose stiffness is derived from a known static state at a designated tension level. For axial wave propagation, Timoshenko kinematics expressed in a curvilinear system are employed, enriched by Poisson and contact effects treated in a beam warping framework. A weak work formulation yields the final generalized eigenvalue problem and the system's requisite dispersion relations. In a numerical application representing a 7-wire strand of a common geometry, the simplified alternative method is shown to display good accuracy against a reference finite element solution up to the first shear cut-off frequency of an individual wire, while reducing computations by approximately 3 orders of magnitude. Further modal energy and contact force analysis, provided by the proposed model, reveals dependence on contact effects for the system's lowest 40 modes, enabling improved intuition regarding the underlying physical mechanisms. In particular, it is shown that the well known “notch frequency” phenomenon can be understood as the hybridization of the fundamental longitudinal mode with a contact resonance effect in the cross-section. The method shows potential to serve as the basis for more complex scenarios, involving a greater number of wires.

  • Open Access

    Non-equilibrium dynamics in concrete: Effects of pump-induced conditioning on nonlinear coda wave interferometry parameters

    by Shilan Shaabani, Pierric Mora, Parisa Shokouhi, Olivier Durand, Odile Abraham

    Tight cracks and microcracks often go undetected by linear ultrasonic testing, motivating nonlinear ultrasonic techniques, such as nonlinear coda wave interferometry (NCWI). NCWI combines high-frequency coda wave interferometry with high-amplitude low-frequency pumping, gradually increasing the pump amplitude, to probe changes in wave velocity due to crack shearing/opening. The question is whether dynamic in-service loading could be used as pump to increase NCWI's utility for in situ monitoring. Since high-amplitude pumping induces transient time-dependent changes in the material, the pumping duration and history influence the material's response. This study presents a systematic investigation of the pumping protocol's influence on NCWI results and discussions of the possible underlying mechanisms. We conduct NCWI with varying duration and pump amplitude orders on two concrete blocks—one intact and one containing a closed crack—under controlled temperature and humidity. Our findings show that longer pump durations cause larger relative velocity changes, likely due to progressive crack sliding/opening, while descending amplitudes yield smaller changes as the material may not fully recover from prior higher-amplitude pumps. Nevertheless, relative velocity changes measure consistently higher for the damaged block compared to the intact one. This work highlights the time-dependent material response and the importance of consistent pumping protocols when deploying NCWI.


  • Open Access

    Nonlinear resonant ultrasound spectroscopy for profiling thermal damage gradients and monitoring post-fire recovery in concrete

    by Massina Fengal, Pierric Mora, Cédric Payan, Parisa Shokouhi, Erwann Rayssac, Eric Gennesseaux, Odile Abraham


  • Open Access

    An Investigation of Pump-Induced Conditioning in NCWI of Concrete

    by Université Gustave Eiffel, Shilan Shaabani, Pierric Mora, Pennsylvania State University (PennState), Parisa Shokouhi, Olivier Durand, Odile Abraham

    Coda Wave Interferometry (CWI) is a highly sensitive ultrasonic method for damage detection, but it often fails to see elastic nonlinearities such as closed cracks. Nonlinear Coda Wave Interferometry (NCWI) addresses this by using a high-amplitude, low-frequency pump to transiently open closed cracks, allowing their detection using high-frequency CWI probes. Despite the successful implementation of NCWI for damage monitoring in concrete, the impact of ‘non-equilibrium dynamics’ on NCWI measurements remains unexplored. In particular, conditioning effects induced by the pump could significantly influence the results, yet these effects have not been systematically studied; this is the gap addressed by this study through a series of controlled experiments conducted inside an environmental chamber. By accounting for this critical phenomenon, this work aims to enhance the reliability and accuracy of NCWI techniques, paving the way for its widespread applications in structural health monitoring.