Michael Barter
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Michael Barter has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Daniel R. Slocombe
Cardiff University
7 shared publications - Adrian Porch
Cardiff University
6 shared publications - Damien Martin Murphy
Cardiff University
5 shared publications - Andrea Folli
Cardiff University
4 shared publications - Emma Richards
Cardiff University
4 shared publications - Heungjae Choi
Cardiff University
4 shared publications
Latest Publications
- Open Access
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 6 (5) , 1184-1194
Microwave Magnetic Field Heating Offers a Highly Selective and Intensive Method of Heating for Catalytic Decomposition of Plastic Waste
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 6 (5) , 1184-1194
Open AccessMicrowave Magnetic Field Heating Offers a Highly Selective and Intensive Method of Heating for Catalytic Decomposition of Plastic Waste
- Open Access
- 1 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 6 (3) , 625-640
Development of a Bespoke Hybrid Electron Paramagnetic Resonance (EPR) Spectrometer for Simultaneous In Situ Neutron Diffraction Studies
We present the design, construction, and commissioning of the first hybrid Electron Paramagnetic Resonance (EPR) spectrometer engineered to operate within a Neutron Powder Diffractometer (NPD), enabling simultaneous measurements of spin properties and crystal structure. Developed for the Polaris instrument at the ISIS Neutron and Muon Source (U.K.), the system was specifically designed to function within the constraints of a neutron beamline. Achieving in situ EPR capability within the diffractometer required several necessary compromises to the diffraction geometry. The finite gap between the two halves of the electromagnet body reduces detector visibility, limiting coverage for a proportion of scattering angles. The retained magnetic return-path introduce restricted regions in 2$\theta$ that require reorientation of the instrument to access. Furthermore, the change in sample geometry from a conventional vertical cylindrical configuration to a skewed horizontal cylinder had a detrimental effect on diffraction peak shape and width. The aluminium microwave cavity, although thinned to 0.1 mm to maximise neutron transparency, introduces additional background Bragg reflections. Despite these trade-offs, simultaneous EPR and neutron diffraction data were successfully acquired. Key innovations include a bespoke electromagnet compatible with beamline access, a thinwalled X-band quasi-elliptical microwave cavity, a remotely tuneable waveguide coupling scheme, and a modular support structure optimised to minimise parasitic scattering. The system was benchmarked using standard paramagnetic reference samples, demonstrating EPR sensitivity comparable to commercial laboratory instruments. This work establishes a new class of multimodal instrumentation, enabling operando investigations of materials in which coupled spinlattice phenomena govern functionality, including batteries, catalysts, and quantum materials.
- 1 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 6 (3) , 625-640
Open AccessDevelopment of a Bespoke Hybrid Electron Paramagnetic Resonance (EPR) Spectrometer for Simultaneous In Situ Neutron Diffraction Studies
We present the design, construction, and commissioning of the first hybrid Electron Paramagnetic Resonance (EPR) spectrometer engineered to operate within a Neutron Powder Diffractometer (NPD), enabling simultaneous measurements of spin properties and crystal structure. Developed for the Polaris instrument at the ISIS Neutron and Muon Source (U.K.), the system was specifically designed to function within the constraints of a neutron beamline. Achieving in situ EPR capability within the diffractometer required several necessary compromises to the diffraction geometry. The finite gap between the two halves of the electromagnet body reduces detector visibility, limiting coverage for a proportion of scattering angles. The retained magnetic return-path introduce restricted regions in 2$\theta$ that require reorientation of the instrument to access. Furthermore, the change in sample geometry from a conventional vertical cylindrical configuration to a skewed horizontal cylinder had a detrimental effect on diffraction peak shape and width. The aluminium microwave cavity, although thinned to 0.1 mm to maximise neutron transparency, introduces additional background Bragg reflections. Despite these trade-offs, simultaneous EPR and neutron diffraction data were successfully acquired. Key innovations include a bespoke electromagnet compatible with beamline access, a thinwalled X-band quasi-elliptical microwave cavity, a remotely tuneable waveguide coupling scheme, and a modular support structure optimised to minimise parasitic scattering. The system was benchmarked using standard paramagnetic reference samples, demonstrating EPR sensitivity comparable to commercial laboratory instruments. This work establishes a new class of multimodal instrumentation, enabling operando investigations of materials in which coupled spinlattice phenomena govern functionality, including batteries, catalysts, and quantum materials.
- Open Access
- 22 May 2025
- Published by The Royal Society in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 383 (2297) , 20240394
Microwaves in clean energy technologies
Energy in the microwave spectrum is increasingly applied in clean energy technologies. This review discusses recent innovations using microwave fields in hydrogen production and synthesis of new battery materials, highlighting the unique properties of microwave heating. Key innovations include microwave-assisted hydrogen generation from water, hydrocarbons and ammonia and the synthesis of high-performance anode and cathode materials. Microwave-assisted catalytic water splitting using Gd-doped ceria achieves efficient hydrogen production below 250°C. For hydrocarbons, advanced microwave-active catalysts Fe–Ni alloys and ruthenium nanoparticles enable high conversion rates and hydrogen yields. In ammonia synthesis, microwaves reduce the energy demands of the Haber–Bosch process and enhance hydrogen production efficiency using catalysts such as ruthenium and Co 2 Mo 3 N. In battery technology, microwave-assisted synthesis of cathode materials like LiFePO 4 and LiNi 0.5 Mn 1.5 O 4 yields high-purity materials with superior electrochemical performance. Developing nanostructured and composite materials, including graphene-based anodes, significantly improves battery capacities and cycling stability. The ability of microwave technology to provide rapid, selective heating and enhance reaction rates offers significant advancements in clean energy technologies. Ongoing research continues to bridge theoretical understanding and practical applications, driving further innovations in this field. This review aims to highlight recent advances in clean energy technologies based upon the novel use of microwave energy. The potential impact of these emerging applications is now being fully understood in areas that are critical to achieving net zero and can contribute to the decarbonization of key sectors. Notable in this landscape are the sectors of hydrogen fuel and battery technologies. This review examines the role of microwaves in these areas. This article is part of the discussion meeting issue ‘Microwave science in sustainability’.
- 22 May 2025
- Published by The Royal Society in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 383 (2297) , 20240394
Open AccessMicrowaves in clean energy technologies
Energy in the microwave spectrum is increasingly applied in clean energy technologies. This review discusses recent innovations using microwave fields in hydrogen production and synthesis of new battery materials, highlighting the unique properties of microwave heating. Key innovations include microwave-assisted hydrogen generation from water, hydrocarbons and ammonia and the synthesis of high-performance anode and cathode materials. Microwave-assisted catalytic water splitting using Gd-doped ceria achieves efficient hydrogen production below 250°C. For hydrocarbons, advanced microwave-active catalysts Fe–Ni alloys and ruthenium nanoparticles enable high conversion rates and hydrogen yields. In ammonia synthesis, microwaves reduce the energy demands of the Haber–Bosch process and enhance hydrogen production efficiency using catalysts such as ruthenium and Co 2 Mo 3 N. In battery technology, microwave-assisted synthesis of cathode materials like LiFePO 4 and LiNi 0.5 Mn 1.5 O 4 yields high-purity materials with superior electrochemical performance. Developing nanostructured and composite materials, including graphene-based anodes, significantly improves battery capacities and cycling stability. The ability of microwave technology to provide rapid, selective heating and enhance reaction rates offers significant advancements in clean energy technologies. Ongoing research continues to bridge theoretical understanding and practical applications, driving further innovations in this field. This review aims to highlight recent advances in clean energy technologies based upon the novel use of microwave energy. The potential impact of these emerging applications is now being fully understood in areas that are critical to achieving net zero and can contribute to the decarbonization of key sectors. Notable in this landscape are the sectors of hydrogen fuel and battery technologies. This review examines the role of microwaves in these areas. This article is part of the discussion meeting issue ‘Microwave science in sustainability’.
- Open Access
- 12 November 2024
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 237
A novel method for fast and efficient numerical simulation of microwave heating in liquids during mixing
- 12 November 2024
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 237
Open AccessA novel method for fast and efficient numerical simulation of microwave heating in liquids during mixing
- Open Access
- 5 August 2024
- Published by Wiley in ChemCatChem
Designing Heterogeneous Catalysts for Microwave Assisted Selective Oxygenation
Microwave dielectric heating is an emerging technology in heterogeneous catalysis. However, catalyst design in this field is not as well developed as when conventional heating is used. In this study the selective oxidation of propene to acrolein has been used as a model reaction to understand the how the properties of bismuth mixed metal oxide catalysts can be tuned for use in microwave assisted catalysis. The role of the dielectric properties, that are crucial to enable the catalyst to be heated in the microwave electric field, were determined using cavity perturbation methods. Catalysts with a very high loss tangent reached high temperatures leading to combustion products, whereas materials with a low loss tangent could not be heated and were inactive. Bi2MoO6 and BiVO4 both showed promising performance during an initial screening and were investigated further. For Bi2MoO6, a partial substitution of molybdenum with vanadium resulted in the formation of Bi1−X/3V1−xMoxO4, with a decrease in particle size and dielectric loss tangent, and the highest rate of acrolein production was found when x=0.6 at 15 W microwave power. Higher microwave power resulted in thermal runaway which decreased the activity of the catalyst.
- 5 August 2024
- Published by Wiley in ChemCatChem
Open AccessDesigning Heterogeneous Catalysts for Microwave Assisted Selective Oxygenation
Microwave dielectric heating is an emerging technology in heterogeneous catalysis. However, catalyst design in this field is not as well developed as when conventional heating is used. In this study the selective oxidation of propene to acrolein has been used as a model reaction to understand the how the properties of bismuth mixed metal oxide catalysts can be tuned for use in microwave assisted catalysis. The role of the dielectric properties, that are crucial to enable the catalyst to be heated in the microwave electric field, were determined using cavity perturbation methods. Catalysts with a very high loss tangent reached high temperatures leading to combustion products, whereas materials with a low loss tangent could not be heated and were inactive. Bi2MoO6 and BiVO4 both showed promising performance during an initial screening and were investigated further. For Bi2MoO6, a partial substitution of molybdenum with vanadium resulted in the formation of Bi1−X/3V1−xMoxO4, with a decrease in particle size and dielectric loss tangent, and the highest rate of acrolein production was found when x=0.6 at 15 W microwave power. Higher microwave power resulted in thermal runaway which decreased the activity of the catalyst.
- Open Access
- 12 November 2022
- Published by Springer Nature in Research on Chemical Intermediates
- Vol. 49 (1) , 289-305
An in situ study of the thermal decomposition of 2,2′-azobis(2-methylpropionitrile) radical chemistry using a dual-mode EPR resonator
A custom-built dual-mode EPR resonator was used to study the radical chemistry of AIBN thermal decomposition. This resonator enables both simultaneous in situ heating using microwaves and EPR measurements to be performed. The thermal decomposition of AIBN was compared following conventional heating methods and microwave-induced (or dielectric) heating methods. Under both heating conditions, the radicals formed and detected by EPR include the 2-cyano-2-propyl (CP●) and 2-cyano-2-propoxyl (CPO●) radicals. Under aerobic conditions, the observed relative distribution of these radicals as observed by EPR is similar following slow heating by conventional or dielectric methods. In both conditions, the kinetically favoured CPO● radicals and their adducts dominate the EPR spectra up to temperatures of approximately 80–90 °C. Under anaerobic conditions, the distribution can be altered as less CPO● is available. However, the observed results are notably different when rapid heating (primarily applied using a MW-induced T-jump) is applied. As the higher reaction temperatures are achieved on a faster timescale, none of the ST●-CPO adducts are actually visible in the EPR spectra. The more rapid and facile heating capabilities created by microwaves may therefore lead to the non-detection of radical intermediates compared to experiments performed using conventional heating methods.
- 12 November 2022
- Published by Springer Nature in Research on Chemical Intermediates
- Vol. 49 (1) , 289-305
Open AccessAn in situ study of the thermal decomposition of 2,2′-azobis(2-methylpropionitrile) radical chemistry using a dual-mode EPR resonator
A custom-built dual-mode EPR resonator was used to study the radical chemistry of AIBN thermal decomposition. This resonator enables both simultaneous in situ heating using microwaves and EPR measurements to be performed. The thermal decomposition of AIBN was compared following conventional heating methods and microwave-induced (or dielectric) heating methods. Under both heating conditions, the radicals formed and detected by EPR include the 2-cyano-2-propyl (CP●) and 2-cyano-2-propoxyl (CPO●) radicals. Under aerobic conditions, the observed relative distribution of these radicals as observed by EPR is similar following slow heating by conventional or dielectric methods. In both conditions, the kinetically favoured CPO● radicals and their adducts dominate the EPR spectra up to temperatures of approximately 80–90 °C. Under anaerobic conditions, the distribution can be altered as less CPO● is available. However, the observed results are notably different when rapid heating (primarily applied using a MW-induced T-jump) is applied. As the higher reaction temperatures are achieved on a faster timescale, none of the ST●-CPO adducts are actually visible in the EPR spectra. The more rapid and facile heating capabilities created by microwaves may therefore lead to the non-detection of radical intermediates compared to experiments performed using conventional heating methods.
- Open Access
- 21 May 2022
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 12 (17) , 5274-5280
The influence of solvent composition on the coordination environment of the Co/Mn/Br based para-xylene oxidation catalyst as revealed by EPR and ESEEM spectroscopy
The industrially important para-xylene oxidation reaction, based on a Co/Mn/Br catalyst, operates in a water/acetic acid (H2O/AcOH) solvent system.
- 21 May 2022
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 12 (17) , 5274-5280
Open AccessThe influence of solvent composition on the coordination environment of the Co/Mn/Br based para-xylene oxidation catalyst as revealed by EPR and ESEEM spectroscopy
The industrially important para-xylene oxidation reaction, based on a Co/Mn/Br catalyst, operates in a water/acetic acid (H2O/AcOH) solvent system.
- Open Access
- 30 January 2022
- Published by Springer Nature in Applied Magnetic Resonance
- Vol. 53 (6) , 861-874
Design Considerations of a Dual Mode X-Band EPR Resonator for Rapid In-Situ Microwave Heating
This paper describes the design considerations for a dual mode X-band continuous wave (CW) Electron Paramagnetic Resonance (EPR) cavity, for simultaneous EPR measurement and microwave heating of the same sample. An elliptical cavity geometry is chosen to split the degeneracy of the TM110 mode, allowing for a well resolved EPR signal with the TM110,a and TM110,b modes resonating at around 10 GHz and 9.5 GHz, respectively, the latter of which is used for EPR measurements. This geometry has the benefit that the TM010 mode used for microwave heating resonates at 6.1 GHz, below the cut off frequency of the X-band waveguide used for the EPR channel, providing effective isolation between the heating and EPR channels. The use of a pair of 9 µm thick copper clad laminates as the flat cavity walls allows for sufficient penetration of the modulation field (Bmod) into the cavity, as well as maintaining a high cavity Q factor (> 5700) for sensitive EPR measurements. Locating the heating port at an angle of 135° to the EPR port provides additional space for easier coupling adjustment and for larger sample access to be accommodated. The associated decrease of EPR signal strength is fully compensated for by using a 7.2 GHz low pass filter on the heating port. EPR spectra using 1.6 mm and 4.0 mm sample tubes are shown at room temperature (298 K) and 318 K for a standard Cu(acac)2 solution, demonstrating the effectiveness of this dual-mode EPR cavity for microwave heating during EPR detection.
- 30 January 2022
- Published by Springer Nature in Applied Magnetic Resonance
- Vol. 53 (6) , 861-874
Open AccessDesign Considerations of a Dual Mode X-Band EPR Resonator for Rapid In-Situ Microwave Heating
This paper describes the design considerations for a dual mode X-band continuous wave (CW) Electron Paramagnetic Resonance (EPR) cavity, for simultaneous EPR measurement and microwave heating of the same sample. An elliptical cavity geometry is chosen to split the degeneracy of the TM110 mode, allowing for a well resolved EPR signal with the TM110,a and TM110,b modes resonating at around 10 GHz and 9.5 GHz, respectively, the latter of which is used for EPR measurements. This geometry has the benefit that the TM010 mode used for microwave heating resonates at 6.1 GHz, below the cut off frequency of the X-band waveguide used for the EPR channel, providing effective isolation between the heating and EPR channels. The use of a pair of 9 µm thick copper clad laminates as the flat cavity walls allows for sufficient penetration of the modulation field (Bmod) into the cavity, as well as maintaining a high cavity Q factor (> 5700) for sensitive EPR measurements. Locating the heating port at an angle of 135° to the EPR port provides additional space for easier coupling adjustment and for larger sample access to be accommodated. The associated decrease of EPR signal strength is fully compensated for by using a 7.2 GHz low pass filter on the heating port. EPR spectra using 1.6 mm and 4.0 mm sample tubes are shown at room temperature (298 K) and 318 K for a standard Cu(acac)2 solution, demonstrating the effectiveness of this dual-mode EPR cavity for microwave heating during EPR detection.
- Open Access
- 8 October 2021
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 23 (41) , 23602-23609
Simultaneous neutron powder diffraction and microwave characterisation at elevated temperatures
Instrumentation was developed to allow simultaneous neutron powder diffraction with microwave characterisation at elevated temperatures. To validate and demonstrate its capability, results are shown for desolvation of a MOF sample (MFM-170).
- 8 October 2021
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 23 (41) , 23602-23609
Open AccessSimultaneous neutron powder diffraction and microwave characterisation at elevated temperatures
Instrumentation was developed to allow simultaneous neutron powder diffraction with microwave characterisation at elevated temperatures. To validate and demonstrate its capability, results are shown for desolvation of a MOF sample (MFM-170).
- Open Access
- 1 January 2020
- Published by Elsevier in Journal of Magnetic Resonance
- Vol. 310, 106644
A novel dual mode X-band EPR resonator for rapid in situ microwave heating
- 1 January 2020
- Published by Elsevier in Journal of Magnetic Resonance
- Vol. 310, 106644
Open AccessA novel dual mode X-band EPR resonator for rapid in situ microwave heating