YLYunli Li

Yunli Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Yunli Li has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Compact Millimeter-Wave High-Selectivity Filtennas and Arrays Incorporating Multiparasitic Structures for Miniaturized Wireless Devices

    by Sai Ma, Jun Xu, Kai Chen, Yuechao Wang, Yunli Li, Lei Xiang, Xiaoyue Xia, Wei Hong

    In this article, compact millimeter-wave (mmWave) filtennas are proposed based on the multiparasitic structure incorporation technique to achieve high selectivity, and their working principle is systematically analyzed using equivalent lumped circuits. Initially, a single-polarized filtenna is designed in the form of a proximity-coupled stacked patch antenna. Cross and ring patches are employed to achieve compact size, while high selectivity is realized by incorporating multiparasitic structures, i.e., shorted stubs, ring patches, and C-shaped strips. Subsequently, the single-polarized filtenna is extended to a dual-polarized version by utilizing two sets of identical feeding structures, while maintaining high polarization isolation. Prototypes of both the single- and dual-polarized filtennas are fabricated and measured. The results indicate that the −10-dB impedance bandwidths of the filtennas cover a broad mmWave band ranging from 24.25 to 29.5 GHz, with out-of-band suppression exceeding 20 dB. Furthermore, two $1\times 4$ arrays are constructed using the proposed single- and dual-polarized filtennas, respectively, incorporating essential decoupling structures to improve the port and polarization isolation. Experimental results confirm the exceptional scanning and filtering performances of the two arrays. The merits of all the proposed filtennas and arrays make them promising candidates for B5G/6G miniaturized wireless devices.


  • A Microwave/Millimeter-Wave Shared-Aperture Filtering Antenna With Reused via Structure

    by Jian-Xin Chen, Jun-Yao Yang, Xin-Hao Ding, Tian-Yu Yan, Yun-Li Li, Wen-Wen Yang

    A microwave (MW) and millimeter wave (MMW) shared-aperture filtering antenna with reused via structure for 5G application is proposed in this article. The antenna is composed of a 3.5 GHz filtering patch antenna and a 28 GHz substrate-integrated filtering cavity antenna (SIFCA) array. The shorting via structure of the patch antenna, which designed to generate a lower-edge radiation null in the MW band, is repurposed as metallized grooves for 28 GHz cavity antenna array radiation in the MMW band. Then, two parasitic patches are applied to produce an upper-edge radiation null at the MW band. For the 28 GHz SIFCA element, a stub-loaded microstrip feed line is employed to generate a controllable radiation null. Moreover, for the extension of MMW antenna array, two additional SIFCA elements are further inserted. The antenna array extension is realized as a 1×2 patch array for MIMO system and a 1×12 SIFCA array for high-gain and beam-steering applications. A dual-band antenna array prototype for validation is fabricated and tested. The measured results demonstrate a reasonable agreement with the simulated ones.


  • Wideband Three-Way FPD With Unequal Division Ratio Based on Coaxial-to-RWG Transition

    by Jian-Xin Chen, Yu-Xing Yan, Ye-Xin Huang, Wei Yu, Yunli Li

    A simple design approach of wideband three-way filtering power divider (FPD) with unequal division ratio based on coaxial-to-rectangular waveguide (RWG) transition is investigated. The bandpass filtering response is achieved using high-pass characteristic of RGW and bandgap characteristic of coaxial-to-RWG transition improved by loading T-type resonators. The allocation of power depends solely on the distance between the outputs and the central plane of the rectangular cavity. Meanwhile, the filtering functions and power splitting are independent of each other, achieving sharped roll-off of the upper stopband and unequal power division ratio. For validation, a wideband unequal FPD with center frequency at 4.1 GHz and with 3-dB fractional bandwidth (FBW) of 58.5% is designed, simulated, and fabricated. The insertion loss (IL) of all three outputs is less than 0.4 dB (excluding ideal loss), demonstrating the advantage of low loss in the rectangular cavity.


  • A Millimeter-Wave Wideband Dual-Polarized Integrated DRA Array With Improved Isolation

    by Yunli Li, Fan Wu, Dingwei Xi, Zhihao Jiang, Chao Yu, Wei Hong

    This paper presents a millimeter-wave (mmWave) integrated dielectric resonator antenna (DRA) array. Within the context of a two-dimensional array possessing broadband and dual-polarization features, mutual coupling between elements is suppressed. The DRA elements operate in a pair of high-order modes (TE103 and TE013), and each antenna is excited by a pair of orthogonal Y-shaped feeding lines through a cross coupling slot. The proposed dielectric resonator consists of three portions with different permittivity, facilitating a permittivity transition from low to high and then back to low. This design improvement enhances impedance matching between the feed and the DR, as well as between the radiator and the air, resulting in improved reflection coefficients and increased isolation. In addition, all the dielectric materials with the same permittivity are integrated and manufactured as a single piece to mitigate manufacturing and assembly errors, thereby minimizing potential performance degradation. An array prototype consists of 4×4 antenna elements is fabricated for demonstration. The array achieves a common -10-dB impedance bandwidth of 30.6% with an overlapped scanning coverage ranging from -47º to 47º at 27 GHz. The proposed design has the advantages of wide bandwidth, improved isolation, and wide scanning angle, which are attractive for 5G mmWave application.


  • Dual-Polarized Heterogeneous Stacked Patch Antenna With Stable Radiation Performance and High Efficiency

    by Jian-Xin Chen, Tian-Yu Yan, Jun-Yao Yang, Xin-Hao Ding, Ling-Ling Yang, Yunli Li

    In this letter, a ±45° dual-polarized heterogeneous stacked patch antenna with stable radiation performance and high efficiency is presented for the 5G massive multiple-input–multiple-output (M-MIMO) base station. It comprises a driven metallic patch (MP) and a parasitic dielectric patch (DP), which induce low- and high-frequency resonant modes, respectively. The excitation of the top DP is achieved by the bottom MP through four supporting dielectric blocks between them, which allow for surface-mounted technology (SMT) installation of the DP. Furthermore, the utilization of DP for generating high-frequency mode enables the heterogeneous antenna has an efficiency of > 90% in a bandwidth (|S 11 | < -15 dB) of 14.1% (3.3-3.8 GHz). The off-center configuration of the four dielectric blocks increases the equivalent dielectric constant of the sidewall of the heterogeneous radiator, resulting in stable radiation patterns. The variations of realized gain and half-power beam width (HPBW) are below 0.3 dBi and 5°, respectively.


  • A Wideband Transmitarray Antenna Based on True-Time Delay Magneto-Electric Dipole Elements

    by Yunli Li, Penghui Jian, Dingwei Xi, Fan Wu, Zhi Hao Jiang, Wei Hong

    In this paper, a millimeter-wave (mmWave) wideband transmitarray antenna (TA) based on true-time delay (TTD) magneto-electric (ME) dipole elements is proposed. The TTD element is composed of two identical ME dipole with L-shaped probes connected by a time-delay stripline. By adjusting the length of the stripline, a phase shift of over 1200∘ can be achieved. To evaluate the effectiveness of the TTD technique compared to the traditional method with phase truncated within 360∘, several TAs with different F/D ratios have been analyzed using an in-house algorithm based on aperture-field method. The numerical results reveal that the TTD technique enhances the gain bandwidth of the TA. Furthermore, a TA prototype with a quasi-circular aperture consisting of 904 elements is designed, fabricated, and tested for demonstration, with an F/D ratio of 0.8. The measured results exhibit a 3-dB bandwidth of 40.7% spanning from 23.5 to 35.5 GHz and a peak gain of 32.6 dBi, corresponding to a maximum aperture efficiency of about 41.4%, highlighting the potential of the proposed TA for mmWave applications.


  • A Wideband Differentially Fed Dual-Polarized Antenna Array for 5G/6G mmWave Application

    by Lei Xiang, Fan Wu, Kai Chen, Yunli Li, Sai Ma, Xiaoyue Xia, Chao Yu, Zhi Hao Jiang, Yao Yu, Wei Hong

    In this article, a wideband millimeter-wave (mmWave) differentially-fed (DF) dual-polarized (DP) magneto-electric (ME) dipole antenna is proposed for the fifth and sixth generation (5G/6G) wireless communications. Benefitting from the delicately-designed cross-overlap differential feeding scheme deployed at the center of the perfectly-symmetrical antenna, the ME-dipole can be effectively excited to achieve wideband operation for both orthogonal polarizations. Meanwhile, the feeding and radiation structures can be located at the same metallic layer to reduce the profile height while maintaining a high port isolation. When the antenna element is excited by the ideal differential ports, a wide overlapped impedance bandwidth of about 58.3% (24.2-44.1 GHz), port isolation higher than 30 dB, a stable gain response with a peak gain of 7.5 dBi and symmetrical radiation patterns with low cross polarization levels less than −40 dB can be achieved. For proof-of-concept demonstration, a corresponding 1 × 4 phased array antenna is designed, fabricated and measured. A wide overlapped active impedance bandwidth of about 58% (24.7-44.8 GHz) and beam scanning characteristics of the array are experimentally verified. In virtue of wide bandwidth, simple and compact geometry, low profile, high integration, and ease of fabrication and miniaturization, the proposed antenna design is promising for diverse 5G/6G mmWave applications.


  • A Compact Dual-Polarized Endfire Antenna Array for 5G Millimeter-Wave Terminal

    by Yunli Li, Fan Wu, Dingwei Xi, Zhihao Jiang, Chao Yu, Wei Hong

    This paper proposes a compact dual-polarized end-fire antenna array for 5G millimeter-wave (mmWave) application. The dual-polarized antenna unit is constructed by an open-ended substrate integrated waveguide (SIW) cavity for vertically polarized (VP) radiation and a broadband electric dipole for horizontally polarized (HP) radiation. By sharing the side walls of two neighboring SIW channels of the VP elements, the substrate integrated coaxial line (SICL) feeding structure for the HP element is achieved, thus a compact size of the final antenna array can be accomplished. To extend the bandwidth of the VP element, the quasi-TE 11 mode of the cavity and the slot mode of the end-fire aperture are adopted for the VP element. A corresponding linear array with four units is designed and fabricated. The common -10-dB impedance bandwidth covers from 24.8 GHz to 29.2 GHz. The maximum gain is 10.0 dBi for both polarizations, with an overlapped scanning coverage ranging from -41.5º to 45.5º at 27 GHz. The proposed design has a compact configuration, and a wide scanning range, which is alternative for 5G mmWave terminal application.